for some reason when im in landscape mode (ie when the keyboard is out) the touchscreen doesnt work at all.
it works perfectly when im in portrait mode though so im not sure what it is. Is it possible something got detached when the screen i slide out the screen? i didnt drop it so im not sure whats causing this problem.
Hi, I have the same issue as you currently, I have tried different ROMs and this problem persists. Have you found a fix for this yet or does anyone else know how to fix? I too fear it is a hardware problem but havent dropped it or damaged it in any way.
Strange, i've got this problem from today, touchscreen just stops responding once i slide keyboard out but the hardware buttons remain working...
but if i manually change screen orientation without sliding keyboard out, the screen is still responsive...
Anyone know what could be wrong?
http://forum.xda-developers.com/showthread.php?t=561151
almost certainly. Mine started out being unresponsive in landscape mode (just suddenly stopped responding to touch) and then ended up black screening whenever i slid it open.
see pic 1 for what is probably happening. I've done the fix in pic 2 myself (although i've put felt on BOTH sides now) but if you have warranty then use it of course!!
HTH!
btw I think most X1 users are going to "Xperience" this at some point. I did nothing unusual to my device other than use it! Maybe Sony have addressed it since (mine was bought in January) but I doubt it....
i too have this problem!
i bought it off eBay though so i don't have proof of purchase for warrenty!
anybody know whether Sony ericsson UK accept xperia warrenty without proof of purchase?
i know someone i think in america got it repaired under warrenty without proof of purchase!
Hmm I'll give SE a call tomorrow
ive just sent my xperia off today in the UK but with the proof of purchase from o2, I believe it to be a hardware problem. However i would certainly see if you can blag it somehow to get it fixed, its obviously a problem from the manufacturer and we dont pay all this money for these malfunctioning products without some sort of decent warrenty!
unfortunately i couldnt get it fixed myself so i sent it to SE for repair.
i have the x1a (us version) and just called the xperia hotline and i sent it in. they didnt ask me for proof of purchase. i have already sent my xperia once before to repair the cracks in the body and keyboard.
im surprised as to how defective it is from normal usage. it seems very sturdy at first. i guess its also because i have never kept a phone for that long. i usually switch every two months.
well the guy i bought it off on ebay seems willing to help and is looking for the proof, if he can't find it then i'll just send it off anyway and cross my fingers!
worst comes to worst i'm 10£ short and i need to buy a new ribbon cable
@bigneeker
u switch every two months! my god you must be rich!
man the same exact thing happened to me today as well. first problems were when sliding out the keyboard to text someone and trying to press the send key during landscape display which wasn't registering so i had to close phone up to hit send. then later as u open the phone into landscape the screen was no longer responsive in that display.
then came the black screen when opened but if u hit the power button on during with the phone opened the picture would come out. now finally my phone has no image at all with the phone opened and can only work in portrait mode
i've had my x1 for about 10 months now so its still under warranty but man am i seriously disappointed with this. most likely they'll replace my ribbon with same cheap one and have to deal with this problem again in a couple of months.
same as above has just started happening to me too!
with mine though whenever i slide the keyboard out and it dosent work, when i slide back in it messes up all the screen alignment in portrait mode.
this fantastic phone is starting to get on my...s now!
I have exactly the same problem too! It started the day after the warranty expired! What should I do???
had the same issue, after a week t stopped workng at all. And they refues my waranty... And it would vost me 180EURov lol a ripoff!
So i took t home and dssasembled it, gues what, ribbon cable s halfway cut! Glue ddnt help, so i ordered nw one, 30EUR or 50$ from http://cnn.cn/shop/sonyericsson-xperia-c-28_638.html Thought i could also buy from ebay, same price.
Now i also ordered new housng from ebay, and this time i have and idea. i wll glue some small blockade inside sliding mechanizm. So it will prevent from cable being stretched too much when open/close.
Anyway, why THE **** DID SE NOT MAKE RIBBON CABLE LONGER!!!
Or w8, it was HTC, they did this on purpuse for SE?
Deffectve ribbon
To me this didn't occure yet, I hope will be later than sooner, but I wonder ... SE X2 has a different ribbon?
Maybe HTC is not as (market) neutral as they might expect it? )
the HTC direct product , like TouchPro, TouchPro2 have a same problem or not ?
Hope Yet
I just got the same issue, had my phone 1 year and 2 months now.
If you are in the EU your one year warranty becomes 2years on electronics regardless if the manufactures warranty is 1 year. Just so you know. Contact you local citizens advise bureau to find out or goggle it. Hope that helps.
the warrenty on the x1 (in the uk anyway) is 2years!
also! a warning about ebay housing, they are pretty much all fakes! and cause more trouble then they're worth! i pretty much wore out the screws whne i used one, had to literaly cut my phone apart from it!
cnn.cn is THE place to buy!
CommanderThor said:
had the same issue, after a week t stopped workng at all. And they refues my waranty... And it would vost me 180EURov lol a ripoff!
So i took t home and dssasembled it, gues what, ribbon cable s halfway cut! Glue ddnt help, so i ordered nw one, 30EUR or 50$ from http://cnn.cn/shop/sonyericsson-xperia-c-28_638.html Thought i could also buy from ebay, same price.
Now i also ordered new housng from ebay, and this time i have and idea. i wll glue some small blockade inside sliding mechanizm. So it will prevent from cable being stretched too much when open/close.
Anyway, why THE **** DID SE NOT MAKE RIBBON CABLE LONGER!!!
Or w8, it was HTC, they did this on purpuse for SE?
Click to expand...
Click to collapse
Uh oh... I disassembled my xperia to change the silver to black... I have a feeling my shoddy reassembly didn't help as after I did it slowly have some serious problems began. My reception/gps is terrible, cuts in and out all the time, my hinge is extremely loose and wobbly especially once in landscape mode, battery life has gotten a lot worse, and now as per the rest of us my landscape is pretty much useless with no touchscreen response also the screen alignment once back in portrait is way off.
I'm pretty sure I'm in for a similar surprise once i disassemble my poor phone again. Anyways any update on the new ribbon? I'm currently looking for a replacement tho even tho I really love my X1 for the most part, its hard finding a phone with similar/better features in my price range.
Hello overyone, I just bought off a old x1 which had the same problem. It was my 3rd phone. And i have replaced many screens. For now my conclusion is its the flex cable between the screen/buttons/touchscreen etc.....
you can buy them on ebay for about 28 dollars(incl. shipping)
Most of the time it is not the screen/touchscreen. Its the flex cable connecting it all.
see picture of the part i mean:
(search google for: "x1 flex cable"
Before opening phone: please be sure how to open it. Because it maybe very tricky to open if you are unexperienced!!!!!
Hope it help y'all
Hello overyone, I just bought off a old x1 which had the same problem. It was my 3rd phone. And i have replaced many screens. For now my conclusion is its the flex cable between the screen/buttons/touchscreen etc.....
you can buy them on ebay for about 28 dollars(incl. shipping)
Most of the time it is not the screen/touchscreen. Its the flex cable connecting it all.
see picture of the part i mean:
(search google for: "x1 flex cable"
Before opening phone: please be sure how to open it. Because it maybe very tricky to open if you are unexperienced!!!!!
Hope it help y'all
Well the problem is that, I wanted to fix my HTC HD2 on my own, the glass broke, a day or two ago, so I started to carefully get it out, and when I got it out i realized i broke the flat connection thingy to the touch, therfore I wanted to hear if this was the right thing to buy, I took out the glass, and the black'ish plastic right behind the glass, so is this the right thing to buy or not?
mytrendyphone . com/shop/htc-hd2-display-22940p.html if it is not the right thing to buy, then please tell me what is the right thing to buy, I live in denmark, so a place the is shippin to denmark would be nizzle
Hi!
I'll try to help in case you havn't found a solution yet
I recently had a similar problem. I also broke my digitizer (touch screen, which sits ontop of the actual LCD) and needed a repalcement.
If i understood your post correctly then you broke the flex cable (i think it was flex) which connected the digitizer to the actual LCD. If so, then yes, your link is correct, however, the digitizer cable is SOLDERED to the LCD end (at least for the Europe models, i heard there was a "clip in" version for US models), therefore, if you aren't an experienced solderer (which i wasn't) or you don't know anyone who is extreamly good at it i recommend you buy a full set (LCD + digitizer). Search eBay for "LCD Display Screen + Digitizer for HTC HD2 HD II 2 Leo"
I ordered the same one & installed it, however, be careful when (dis)assembling the phone, especially when installing the LCD connector to the motherboard, i got it wrong the 1st time which resulted in the colors not to display correctly.
Hope this helps
Hello everyone,
My XZ screen broken and half of screen doesnt regocnize any touches...
Is possible to change touch digitizer? In home? Or better to bring it to the service?
keturkaimis said:
Hello everyone,
My XZ screen broken and half of screen doesnt regocnize any touches...
Is possible to change touch digitizer? In home? Or better to bring it to the service?
Click to expand...
Click to collapse
Probably is posible to change the screen by yourself, if you are skilled enough. Bringing it to service, last time I checked, they charged you half the price of a new unit for the new screen.
DrKrFfXx said:
Probably is posible to change the screen by yourself, if you are skilled enough. Bringing it to service, last time I checked, they charged you half the price of a new unit for the new screen.
Click to expand...
Click to collapse
oh dear thats going to cost you. i broke mine xperia z screen all i did was take it out of my pocket and it was broke. i sourced the part off amazon for 95 quid. all because sony are robbing and put the outerglass with the lcd all in one unit to make it more expensive. anyway i did it myself as the repar centre was asking 250 quid. its not waterproof now though as i couldnt find the gasket for the lcd so i used normal 2 mm strips.
Thanks guys.. Okay.. I will try to change by myself.. maybe do you know where i can get cheaper that glass lens?
I found this cheapest variant in ebay. http://www.ebay.com/itm/For-Sony-Xp...er_Cell_Phone_Accessories&hash=item2a306f4842
P.S. How I understant the Display and digitzer is all in one?
up..
I have a Z3+ where the digitizer cracked by itself while laying on the table beside me. I cant use the phone anymore. Screen is still perfectly fine but touch is not working.
I contacted Sony and it turns out to be to expensive to fix at a repair shop. Is it possible to change this myself? A Digitizer is only ~10$ on Ebay but I cant find much information on how to change it.
The only video I found is this, but its not very clear:
Xperia Z3 Digitizer Glass Only Replacement
https://www.youtube.com/watch?v=levTY6Ixxl8
Does anyone have any experience on doing this and could give me some informaiton?
Nilsi
It's Xperia Z thread, but my advice is to buy digitalizer and touch together and replace them. I tried to change just touch on my XZ and i broke digitalizer, as I read through the net and find that Sony made it nearly impossible to remove touch from digitalizer. If you don't have equipment and skills it's best to replace them together.
Good Luck!
Sent from my XPERIA M2 using Tapatalk
Thank you! I think buying the full screen + touch is a bit to pricey for me. its around 100-120$, not worth it for me since I can fail to mount it and loose more money. I just wanna give changing digitizer a shot before I throw the phone in the garbage can.
I am thinking of taking it apart and see if I can separate the digitizer first, if I succeed I will order a new one and put on top.
hey guys
so last week something unbelievable happened to me and i say unbelievable because no one will believe what happened but thats it what can i do about it xD OK so last week my G Watch fell from my hand while wearing it and it fell off on my Xperia Z from about 20 centimeters and i didn't care that exact moment because i said like WTF it wont harm the device and after 2 minutes i opened my phone aaand its just not working the screen was broken from the area on the left of the microphone and the phone wont work but from a special small area anyways i went to my local Sony agent and he told me that the digitizer cant be replaced alone and that they will be replacing the whole LCD Display so i went to some other 3rd party repair-shops and they said the same thing and they will be replacing it with a non-original Display that cost 1/5 the price of the one that the Sony Agent offered me ( Sony Agent told me that it costs 170 Jordanian Dinars which equals 240 USD and the phone itself new unlocked costs pretty much less than that in my country ( Jordan ) )
Anyways i was wondering guys if i can replace the digitizer alone by myself (by ordering it from eBay or so and disassembling the phone and replacing it at home ) or should i replace the whole LCD Display ?
(Sorry if i had any English mistakes but i"m not a native English tongue )
Best Regards,,,
I had broken touch screen and i watched video on YouTube how to repair just touch screen, ordered just touch screen from Ali and I broke the digitalizer so i ordered whole screen with mask after. My point is, if you don't have tools and skills (or is you first time) buy whole (touch screen + digitalizer) and replace them.
Good Luck!
Sent from my XPERIA M2 using Tapatalk
Dzepar said:
I had broken touch screen and i watched video on YouTube how to repair just touch screen, ordered just touch screen from Ali and I broke the digitalizer so i ordered whole screen with mask after. My point is, if you don't have tools and skills (or is you first time) buy whole (touch screen + digitalizer) and replace them.
Good Luck!
Sent from my XPERIA M2 using Tapatalk
Click to expand...
Click to collapse
thanks bro :good:
Digitizer and touch screen are glued together making it impossible to remove the touch screen without breaking the digitizer that is made of thin glass.
I replaced the combo on my first Z after my car key fell off from above 15cm or so onto the screen, same story as yours! (X_X)
But:
1/ Besides the combo touch + digitizer piece you also have to buy the sticker as the actual glue around the frame will get destroyed while removing the screen.
2/ If your phone is old, you might want to buy an original battery to replace your existing battery.
3/ While reassembling the battery in the phone make sure it does not stick out from the plane surface otherwise it will push on the glue and reopen your phone. Mine had a piece of plastic on its side with harpoon like features; it looked like it had been forced into place with harpoons retaining it: crappy design, to my opinion.
Some 3M strong and thin double side tape might also be useful to keep the battery into place especially if you keep the original one which might unfortunately get a little bent while un-glueing it from the case...
In any case, you should consider its waterproof feature gone!
Good luck!
MRDK_XZ said:
hey guys
so last week something unbelievable happened to me and i say unbelievable because no one will believe what happened but thats it what can i do about it xD OK so last week my G Watch fell from my hand while wearing it and it fell off on my Xperia Z from about 20 centimeters and i didn't care that exact moment because i said like WTF it wont harm the device and after 2 minutes i opened my phone aaand its just not working the screen was broken from the area on the left of the microphone and the phone wont work but from a special small area anyways i went to my local Sony agent and he told me that the digitizer cant be replaced alone and that they will be replacing the whole LCD Display so i went to some other 3rd party repair-shops and they said the same thing and they will be replacing it with a non-original Display that cost 1/5 the price of the one that the Sony Agent offered me ( Sony Agent told me that it costs 170 Jordanian Dinars which equals 240 USD and the phone itself new unlocked costs pretty much less than that in my country ( Jordan ) )
Anyways i was wondering guys if i can replace the digitizer alone by myself (by ordering it from eBay or so and disassembling the phone and replacing it at home ) or should i replace the whole LCD Display ?
(Sorry if i had any English mistakes but i"m not a native English tongue )
Best Regards,,,
Click to expand...
Click to collapse
Just dont go for non orignal diplay you will regret it, most probably they will order a whole new CHEAP QUALITY front panel from ebay which will have poor quality of screen and all the ports. Also the power button will become a bit hard to press.
I did the same mistake and gave my phone to a local phone repair shop which was cheap but my phone went dead the very next day after it came back from repair. I agree Sony Service Centre will charge more but your phone will be in best possible condition.
My suggestion go to Sony people for repair.....
Hope it helps you
Thank you guys very much i really appreciate your help and i think i'm going to the Sony agent because i dont have that much of experience to disassemble the phone and i might get it even worst instead of fixing it :\
again thank you really much guys
Just pay attention to pay a fake screen no original one there's a few different things between the original one