Related
Hello guys!
I have bricked my P9 EVA-L09 today. i want to update it to android 7 with update from erecovery. i put files from update_data_full_hw_eu.zip and it went good but phone wont boot up and the second file "update.zip" ive extracted to dload but phone cant install it. I've tried many things to unbrick my phone but i cant do it. flashing system via fastboot is impossible cause it says that it cant be written. i have no root ant no bootloader unlocked. Please help me guys QQ
If you have C432, try this:
1. install via sdcard + 3buttons UPDATE.app from HUAWEI_P9_Rollback Package_EVA-L19_from Android 7.0_EMUI 5.0_to Android 6.0_EMUI 4.1_C900B300
2. install via sdcard + 3 buttons HUAWEI_P9_Firmware_EVA-L09_Android 6.0_EMUI 4.1.1_C432B182_Western Europe
marjaN_ said:
If you have C432, try this:
1. install via sdcard + 3buttons UPDATE.app from HUAWEI_P9_Rollback Package_EVA-L19_from Android 7.0_EMUI 5.0_to Android 6.0_EMUI 4.1_C900B300
2. install via sdcard + 3 buttons HUAWEI_P9_Firmware_EVA-L09_Android 6.0_EMUI 4.1.1_C432B182_Western Europe
Click to expand...
Click to collapse
that's the question, because i dont remember my previous working build but ill try this two packages anyway, thanks a lot for your reply
edit: now i cant even go to recovery after flashing rollback :/
edit2: i know why, you posted rollback for eva-L19 and i just copied it and flashed but phone have installed it correctly and i cant go to recovery :'(
Nobody can help me? :crying::crying::crying:
power off, then press the Power + voulume +, wipe data+cache
ziemiak said:
that's the question, because i dont remember my previous working build but ill try this two packages anyway, thanks a lot for your reply
edit: now i cant even go to recovery after flashing rollback :/
edit2: i know why, you posted rollback for eva-L19 and i just copied it and flashed but phone have installed it correctly and i cant go to recovery :'(
Click to expand...
Click to collapse
try installing 6.0 firmware for you model.
i cant go to eRecovery, i cant even shut down device - only full discharge can make it.But i can go to fastboot. Ive tried with fastboot commands but i have locked bootloader and every time my flashes are rejected by phone. The simpliest metod - HiSuite send me message: "no recovery packages are found for your phone model". It should be a way to unbrick it with fastboot but i dont know how.
Hi I was in your shoes yesterday I had to pay for the dn Phoenix to fix my phone it uses a backdoor to install firmware from fastboot
You could try and look for the backdoor commands I found this , I would post a link but can't yet
fastboot oem backdoor info
FB LockState: LOCKED
USER LockState: LOCKED
fastboot oem backdoor get
FBLOCK**obfuscated**
fastboot oem backdoor end
remote: fastboot stat not match
fastboot oem get-bootinfo
locked
fastboot oem check-rootinfo
old_stat: SAFE
now_stat: SAFE
change_time: 0000000000
fastboot oem check-image
secure image verify success
fastboot oem relock
remote: stat not match
fastboot oem backdoor set
remote: data parse fail
fastboot oem frp-erase
Haven't tried, but should remove the Factory Reset Protection (FRP)
fastboot oem emmc_diag
cid info:
mid 17,oid 256,pnm 064G70,prv 0.0,psn 0x18b66278,
csd dump:
D02700320F5903FFFFFFFFEF864000AB00
ext_csd dump:
...
FMW FAIL! WRITE PROTECT!
fastboot oem emmc-dump
unknown status code
fastboot oem get_key_version
huawei_key_v1
fastboot oem battery_present_check
3984mv
fastboot oem get_hwnff_ver
Ver2.3
fastboot oem get-psid
SN:**YourIMEI**
fastboot oem get-build-number
V100R001C00B000
fastboot oem get-product-model
HUAWEI M2-A01W
I will try to send my Huawei to warranty service and if they wont repair my phone ill pay for DC Phoenix too
I had the same problem!
Hi there.
Was in the same situation as you not so long ago.
Get a micro SD card, plug into PC, create a dload folder then download the rollback file from the Huawei website.
I'm a new user so can't post URL. Just Google "Huawei P9 rollback" should be the 2nd option (consumer.huawei link)
Put in the dload folder and put into your P9.
Press and hold power, vol up and down together till the Huawei logo appears and let go when you feel the vibrate.
This should force update and restart. (does not rollback to email 4.1, only unlocks the rollback from emui 5)
Next you need to download your previous firmware, in my case I'm in the UK with unlocked P9, so I downloaded EVA-L09C432B166.
Same again, put micro SD into PC, delete the rollback file and put your firmware in its place.
Put back in the P9 and repeat the above force update.
This will put you back to working stable stock.
For further reassurance, download a build previous to B166 so when it's up and running you can search for an OTA update to make sure all is in order.
Hope this helps.
Did you meant that the rollback flashes without going to eRecovery? I said some posts earlier that i cannot enter eRecovery so i cant dload anything. Im stuck on Huawei logo all the time do you think than i can flash something via dload without going to eRecovery?
erecovery is different.
I'm saying to do a force update, but in order to do so you need a microSD card.
Erecovery involves holding power up while connecting to PC in order to use HiSuite etc to recover.
Force updater tells the phone to search for dload folder on SD card or phone and install the update before trying to boot up OS.
So, if you connect microSD to your PC via a card reader etc and not via your phone, you can create a dload folder, download the rollback file from Huawei (above) the file is only around 80mb or so, plug the SD card back into your phone while powered off, hold down Power + vol up + vol down. The Huawei logo will appear, when it disappears let go of all the buttons. This should bring up the Update screen.
At this point the phone will install the rollback file. and this will bypass the rollback prevention in emui 5 and therefore allow you to install a previous emui build (4.1)
Again though your phone will still not boot at this point as there is no OS working or installed.
So you need to download the corresponding firmware for your phone/country/operator. Once downloaded, remove the memory card from the phone, connect to PC via card reader, delete the rollback file you placed in the dload folder and replace it with the downloaded OS and repeat the process used to install the rollback.
From there you should be back to stock marshmallow.
I should point out the files you download may be in zip folders. You need to extract the "update" file and that's what you place in the dload folder.
Hope this all makes sense, if not I can make a YouTube video and post it.
Good luck.
Now i know what did you mean, but sadly i cant update it too. I tried with my friend's P9 and when i hold these 3 buttons then shows special update screen and in my P9 it doesnt probably because of my bad flash rollback for P9 EVA-L19 and i have EVA-L09 model
http://www.android-hilfe.de/thema/downgrade-von-b360-zurueck-auf-b182.813366/
You must first make a step.
Only http://download-c.huawei.com/download/downloadCenter?downloadId=92743&version=363740&siteCode=de
Then
http://download-c.huawei.com/download/downloadCenter?downloadId=91783&version=358257&siteCode=de
're After You on MM and then can do what you want.
In the first link is a guide.
I did the same thing is what you doing today I've tried this and it fixed my phone
ziemiak said:
Now i know what did you mean, but sadly i cant update it too. I tried with my friend's P9 and when i hold these 3 buttons then shows special update screen and in my P9 it doesnt probably because of my bad flash rollback for P9 EVA-L19 and i have EVA-L09 model
Click to expand...
Click to collapse
The rollback package for L09 model is here: http://download-c.huawei.com/download/downloadCenter?downloadId=91892&version=363759&siteCode=es
Inform the results please.
I made a video to better understand. This wideo is showing that phone isn't searching any dload folder. https://youtu.be/oD9AI_6SqLs
edit: i have tried your advices to put rollback and try to dload it and then same with firmware but there is no reaction i didnt see there any circle with progress of flashing (like it was before i flashed rollback for L19)
Mine is now doing the exact same thing - I too tried the dload method to update from C432B182 to C432B361 and it's screwed my device up too.
Until I tried to use the 'rollback' package, it would at least allow me to power off, so I could get back into the Update screen - after doing that, and trying the B182 again, it's got into this position where I can do literally nothing with it. No combination of buttons, no matter how long I try to hold them, seems to do anything.
An update...
After letting my battery drain completely, I have been able to get into Fastboot mode, by pressing and holding the Volume Down button whilst connecting a USB cable to my PC.
From here, I have been able to run DC-Phoenix, and have been able to write some .APP files to it - which has at the very least got it booting into eRecovery, rather than the boot loop it had before, but is still not fully booting.
It looks like I might need the full, original firmware, in order to proceed?
And I've got about 68 hours left to flash using DC-Phoenix, or I'll have to spend another €15!
Yes you download the original firmware unzip it and put it in the "dload" folder of SD card then do a force update. Hold all the buttons vol + vol - and power
hi everyone...Please help!
I would like to update to( L19C636B361 EMUI 5.0). But I am stuck at a bootloop as I flashed in the wrong order. I first flashed the update.app (HUAWEI P9 Rollback Package-EVA-L19, from EMUI5.0+Android7.0 rollback to EMUI4.1+Android 6.0, C900B300) instead of updating to update.app(L19C636B361) [ wrong SD card inserted].
Then the phone rebooted and I got into the bootloop at Huawei logo. It cannot be turned off. It can only go into fastboot mode. Bootloader is locked and I cannot unlock it (though I havent unlock code). I tried adb/fastboot
There is always an error:
"FAILED: Remote: Command not allowed"
Now I tried to extract (L19c636b190) system.img , recover.img, boot img, flash it via adb/fastboot, but all failed. When I try to get into fastboot it says locked for both lines, and HiSuite tells me it has no software version for this phone version to repair the phone.
Could anyone help me solve the above situation?
Big [email protected]@
Anyone can help....please.
Coz i bring it to the service center, they charge me a unresonable price.
Try with the Marshmallow version and three buttons
Hey buddy. I had the same situation. Here is what I did: First format your sd card. After then download the right firmware where you can find at the huawei support official web page. After than try dload method. First time it will fail but your phone will open. Do a factory reset. Open your phone and flash firmware with dload method again. This time it will be successful and your phone will be stock. Just try. Sometimes methods fail bcoz of wrong files or sd card mistakes.
hiphoplife77 said:
Hey buddy. I had the same situation. Here is what I did: First format your sd card. After then download the right firmware where you can find at the huawei support official web page. After than try dload method. First time it will fail but your phone will open. Do a factory reset. Open your phone and flash firmware with dload method again. This time it will be successful and your phone will be stock. Just try. Sometimes methods fail bcoz of wrong files or sd card mistakes.
Click to expand...
Click to collapse
hi buddy, thanks for your reply
I follow your instrustions, i download the firmware on huawei web site {huawei_Asia_L19c636b190_16_01_2017(3,246,250kb)} with SD card format (fat32) or (exFat). Itried to dload method, I hold volume+- and power key and plug in to computer(windows 10). The phone will vibrate after 5 seconds. But it stuck into huawei logo,it cannot move forward to EMUI update. Besides, the notification light is red and flashing. Reboot and reboot again.
On the other hand, i tried the fastboot mode. I confirmed my device driver works with window, but i don't have any unlock code in order to flash any 3rd party rom. In my P9 , It showed "phone lock" & FRP Lock".
How did you work with dload method? Please kindly share with me ...thank for your reply again.
I had same issue with L19C432B378 92mb rollback file, first time bootloop. Try 5-6 times with 3 button restart and finally enter dload mode.
Second time 92mb flashing and my phone boot L19C900B300.
If there is red led notification, you are out of battery. Charge it about 15 minute first. So card format must be fat32 and fully formatted, not quick format. After than dload method. One more thing; dont plug your phone when trying dload method. Just hold 3 button about 10 seconds. Just try again. If you have right firmware, you will be successful.
hiphoplife77 said:
If there is red led notification, you are out of battery. Charge it about 15 minute first. So card format must be fat32 and fully formatted, not quick format. After than dload method. One more thing; dont plug your phone when trying dload method. Just hold 3 button about 10 seconds. Just try again. If you have right firmware, you will be successful.
Click to expand...
Click to collapse
Hi,
I have the same problem. After trying update in dload mode stuck in bootloop mode. I tried several times to reenter dload mode, but unsuccessful. Now I am out of battery and didn't want to charge in any mode.
Keep restarting every time I put it to charge. Any idea how to charge the battery?
Thanks
Did you got any solution?? Im having the same problem right now
Help me. my phone doesn't start. It stop on huawei logo and looping restart.
Bootloader is no unlook and no recovery.
Dload in SD with 3 combination key Volume Up + Volume Down + Power on doesn't work
What can i do?
thank you
puccetto said:
Help me. my phone doesn't start. It stop on huawei logo and looping restart.
Bootloader is no unlook and no recovery.
Dload in SD with 3 combination key Volume Up + Volume Down + Power on doesn't work
What can i do?
thank you
Click to expand...
Click to collapse
How did you stuck in this position?
Sent from my EVA-L09 using Tapatalk
I had the same Problem but i cant Garantee that this will work for you but it worked verry fine with my (EVA-L09).
1. I started my P9 in Fastboot Mode (Hold Volume Down + Connect USB Cable)
2. I used the Programm DC Phonix 35 at First and used Method 2 (see Link). I used the File for the Dual Sim Version (EVA-L19, you find the File on the Data Base of the DC Phonix Tool) of the P9 because there is no Version for the Solo Sim. But it worked verry fine.
3. After i completed Method 2 i started the Phone and saw that it worked again but it is an verry small android version with no function exept Phone Settings and some Huawei Internal Software.
4. I restarted the Phone into the Fastboot Mode and used Method 1 with the Update.app of the Firmware EVA-L09C432B136. But only do step 1. Step 2 will not work !! After the Process was completed i restarted it and it worked.
5. After that i Searched in the Android Options for an Update and found the EVA-09C432B182. You need to install it to fix some errors. After the Phone installed by itself the B182. I used the Huawei Updater with the Hisuite to Upgrade to B361 because the Phone didnt found a new Version by itself. Guide for Huawei Updater with Software Links
And now my P9 is on the EVA-09C42B361 and can find updates by itself i know the new B383 is out but i will wait a week than the Phone will find the Update by itself and i dont want to Brick it again. In the next Days your Phone will show you that the B383 is avalible.
I hope my Little Guide can Help you. If you have any Problems please write me I know that the DC Phonix tool costs Money but it was the only way it helped me. But i have some credits left at my account i think you can use them if you want
Sorry for my Bad english if there are some questions left please write me
---------- Post added at 08:05 PM ---------- Previous post was at 08:05 PM ----------
jonezie said:
Please help me out
Click to expand...
Click to collapse
So i cant Garantee that this will work for you but it worked verry fine with my (EVA-L09).
1. I started my P9 in Fastboot Mode (Hold Volume Down + Connect USB Cable)
2. I used the Programm DC Phonix 35 at First and used Method 2 (see Link). I used the File for the Dual Sim Version (EVA-L19, you find the File on the Data Base of the DC Phonix Tool) of the P9 because there is no Version for the Solo Sim. But it worked verry fine.
3. After i completed Method 2 i started the Phone and saw that it worked again but it is an verry small android version with no function exept Phone Settings and some Huawei Internal Software.
4. I restarted the Phone into the Fastboot Mode and used Method 1 with the Update.app of the Firmware EVA-L09C432B136. But only do step 1. Step 2 will not work !! After the Process was completed i restarted it and it worked.
5. After that i Searched in the Android Options for an Update and found the EVA-09C432B182. You need to install it to fix some errors. After the Phone installed by itself the B182. I used the Huawei Updater with the Hisuite to Upgrade to B361 because the Phone didnt found a new Version by itself. Guide for Huawei Updater with Software Links
And now my P9 is on the EVA-09C42B361 and can find updates by itself i know the new B383 is out but i will wait a week than the Phone will find the Update by itself and i dont want to Brick it again. In the next Days your Phone will show you that the B383 is avalible.
I hope my Little Guide can Help you. If you have any Problems please write me I know that the DC Phonix tool costs Money but it was the only way it helped me. But i have some credits left at my account i think you can use them if you want
Sorry for my Bad english if there are some questions left please write me
Now with Links
my question is... how i can install new system with locked bootloader when i have access only to a fastboot, please help me.
werindam said:
my question is... how i can install new system with locked bootloader when i have access only to a fastboot, please help me.
Click to expand...
Click to collapse
How do you expect anybody can help you if you don't provide practically no info at all (not even were you running MM, N, O, stock or custom ROM)
- what was the last build you were running (full stock build name, inclvariant, cust, number)
- were xou running custom ROM and which one
- stock recovery or TWRP (which)
- shortly what were you doing when you bricked the phone
Also, do you have bootliader unlock code, and is FRP locked or not (you can see in fastboot).
zgfg said:
How do you expect anybody can help you if you don't provide practically no info at all (not even were you running MM, N, O, stock or custom ROM)
- what was the last build you were running (full stock build name, inclvariant, cust, number)
- were xou running custom ROM and which one
- stock recovery or TWRP (which)
- shortly what were you doing when you bricked the phone
Also, do you have bootliader unlock code, and is FRP locked or not (you can see in fastboot).
Click to expand...
Click to collapse
I dont know last build name - it was stock firmware and recovery
I just factory reset and then phone showing up that i must to enter last google account used in this phone. Thats my mom phone and she has no idea of any information about google acc and she only told me that someone who she bought from this phone maked account ahh.. Sorry for my english
And no, i dont have bootloader unlock code because i dont know how to get it.. and frp is locked
werindam said:
I dont know last build name - it was stock firmware and recovery
I just factory reset and then phone showing up that i must to enter last google account used in this phone. Thats my mom phone and she has no idea of any information about google acc and she only told me that someone who she bought from this phone maked account ahh.. Sorry for my english
And no, i dont have bootloader unlock code because i dont know how to get it.. and frp is locked
Click to expand...
Click to collapse
Do you know how many 'stock ROM and recovery' versions exist, and each may need different procedure to restore your phone
If it is P9 (single SIM, hence L09) -not Dual SIM (L19 or AL10) or Lite or Plus - it can be cust c432, c185 c900, etc, with Android 6 (builds 1xx, 2xx) or Android 7 (builds 3xx, 5xx) - all are stock firmwares
Are you familiar with Fastboot, or maybe the safest way will be to go to service (specially if still under guarantee)
zgfg said:
Do you know how many 'stock ROM and recovery' versions exist, and each may need different procedure to restore your phone
If it is P9 (single SIM, hence L09) -not Dual SIM (L19 or AL10) or Lite or Plus - it can be cust c432, c185 c900, etc, with Android 6 (builds 1xx, 2xx) or Android 7 (builds 3xx, 5xx) - all are stock firmwares
Are you familiar with Fastboot, or maybe the safest way will be to go to service (specially if still under guarantee)
Click to expand...
Click to collapse
yea i know, and if its way to restore somehow this p9 i will can do that via fastboot, just dont know how
Its p9 single sim l09. i think it was c432 rom
Since you didn't unlock Bootloader it must not be scr***ed up severely.
Try the following (independent of your prev build, no need for Fastboot, open Bootloader and other hacking tricks):
- Power off
- Connect by USB cable to the charger
- Must be in the range of reliable WiFi
- Press Vol+ & Pow (in that order) and keep pressing
It shall boot to eRecovery, giving you options to download and reinstall your whole stock firmware
Advice: When you restore, take and save screenshots from About, to know your build, IMEIs, etc
Ive got error : Getting package info failed
you need sd card. in sd card create "dload" folder, in folder copy this update.app link here oh, first link are for eva-l19 here are for eva-l09
then, insert sd card in phone, press and hold vol+ and vol - and power button (hold all buttons till see update things)
after that, download this (or download all at once) link here and delete update.app in dload folder at sd card, and copy all from this b136 download, need to be 2x folder and update.app now larger file than first. and do dload method once more (vol+, vol- and power till update starts)
ah, but you need to charge pgone atlest to 50% to be succes with dload method!
Arnys said:
you need sd card. in sd card create "dload" folder, in folder copy this update.app link here
then, insert sd card in phone, press and hold vol+ and vol - and power button (hold all buttons till see update things)
after that, download this (or download all at once) link here and delete update.app in dload folder at sd card, and copy all from this b136 download, need to be 2x folder and update.app now larger file than first. and do dload method once more (vol+, vol- and power till update starts)
ah, but you need to charge pgone atlest to 50% to be succes with dload method!
Click to expand...
Click to collapse
ok, ill try this
werindam said:
ok, ill try this
Click to expand...
Click to collapse
i edited my writes, first link are wrong, use second for eva-l09
Error: Software install failed.. ;/
battery charged? in eRecovery can see, or turn off phone and put to charger, need to be 50% (some other says need to be 70%)
Hello, i have a similar issue, but i can't boot. My phone bootloop every single time. I can't boot to recovery but i can boot in fastboot. i was in c432b382 and i tried to flash a c432b378 update to have android N
Hi
I installed openkirin RR OS B2 on my P9. I want to back to stock FW. P9 is Rebranded to AL10. Thanks for help.
Makoj said:
Hi
I installed openkirin RR OS B2 on my P9. I want to back to stock FW. P9 is Rebranded to AL10. Thanks for help.
Click to expand...
Click to collapse
Look into the corresponding threads, OpenKirin and Rebranding (Oreo)
Hi
I've problem with P9 Dual Sim EVA-L19. I buy this phone with strange sympthom (no camera app, bluetooth not working). Looks like bad update Android. I try update firmware via dload and SDCard but update still stoping on 5% and after few second message Software update failed. I try 3 diffrend source software and situation no change. Where is problem?
Probably bootloader is locked. Actual software: L19C432B399 (Orange Poland distribution)
kaziutek144 said:
Hi
I've problem with P9 Dual Sim EVA-L19. I buy this phone with strange sympthom (no camera app, bluetooth not working). Looks like bad update Android. I try update firmware via dload and SDCard but update still stoping on 5% and after few second message Software update failed. I try 3 diffrend source software and situation no change. Where is problem?
Probably bootloader is locked. Actual software: L19C432B399 (Orange Poland distribution)
Click to expand...
Click to collapse
Locked Bootloader should not be a problem for DLOAD, but I doubt if your b399 is applicable for DLOAD - for DLOAD it should be FullOTA-MFPV, not just FullOTA-MF.
And the problem is that newer packages are no more PV distributions
Have you tried Factory Reset and Clear Cache from Recovery or eRecovery?
Connect the switched off phone to the charger and switch it on by pressing and keeping pressed Vol+, and by pressing Pow.
Phone will boot to eRecovery.
Choose Install Latest version and Recovery to reinstall the whole firmware - you must have WLAN connection that eRecovery can download from.
Follow by Factory Reset from eRecovery and Clear Cache.
There should be also an option in HiSuite on the PC to force reinstallation of the firmware (sorry, I didn't try, not using HiSuite)
Firmware can be also (re)installed from Firmware Finder, but it requires changing the DNS server on your home WLAN.
Btw, c432 means the pan-European cust, hence you may even go with the newer b504/b505 but eRecovery method will not offer them to you.
There are other methods, HWOTA/HWOTA7 to (re)install FullOTA-MF firmware which is not PV (only PV is applicable for DLOAD), but they require the unlocked Bootloader
PS: If eRecovery reinstallation fails, then you can install the following EVA-L19c432b399 package by DLOAD:
https://androidhost.ru/6se
When you download, you have to unzip, there are might be further zipped or archived folders.
Eventually you will find a Documentation folder with the guides for installation (this is internal Huawei package for service repair) and Software folder that must contain the usual three ZIP installation files.
Those three ZIP files (do not unzip them) are applicable for DLOAD - indeed, in the Installation guide in the Software folder, DLOAD installation must be described.
(I didn't try this particular L19c432b399 package but I tried for DLOAD and it worked two other service restore packages from the same source, and they had the Documentation/Software structure as described)
You made my day
I don't know about eRecovery and this method solve my problem. Bluetooth work great, camera and much more app come back
Thanks for you help