I tried installing the xposed installer for Volumebutton song switch.
It rebooted and really hasnt stopped since.
I've downloaded doomlords flashtool, but i get this error when trying to open it, and the Generic nordic firmware .ftf
(Sweden here)
I've tried connecting the phone in any of the modes trying to repair it with PC companion, but it doesn't seem to work.
Any help would be appreciated - thanks
Hey guys
I am trying to flash the generic UK rom on my Xperia Z using flashtool but it gets stuck at 0%, It doesn't even flash anything the phone stays intact. Does anyone know how to sort this?
smash_07 said:
Hey guys
I am trying to flash the generic UK rom on my Xperia Z using flashtool but it gets stuck at 0%, It doesn't even flash anything the phone stays intact. Does anyone know how to sort this?
Click to expand...
Click to collapse
Which version of flashtool are you using?
Sent from my C6602 using xda premium
gire.prasad said:
Which version of flashtool are you using?
Sent from my C6602 using xda premium
Click to expand...
Click to collapse
I'm using flashtool 0.9.10.1 on Windows 8 64-bit.
EDIT: Here's a log that may help
19/002/2013 04:02:35 - INFO - <- This level is successfully initialized
19/002/2013 04:02:35 - INFO - Flashtool Version 0.9.10.1 built on 2013-01-09 19:49:47
19/002/2013 04:02:35 - INFO - You can drag and drop ftf files here to start flashing them
19/002/2013 04:02:40 - INFO - Device disconnected
19/003/2013 04:03:05 - INFO - Selected C6603_Generic Uk_No Branding.ftf
19/003/2013 04:03:05 - INFO - Preparing files for flashing
19/005/2013 04:05:46 - INFO - Please connect your device into flashmode.
19/006/2013 04:06:02 - INFO - Device connected in flash mode
19/006/2013 04:06:02 - INFO - Opening device for R/W
19/006/2013 04:06:02 - INFO - Reading device information
19/006/2013 04:06:02 - INFO - Phone ready for flashmode operations.
19/006/2013 04:06:02 - INFO - Current device : C6603 - CB5A1PKLNS - 1270-6350_R8A - 1269-5309_10.1.A.1.350 - GLOBAL-LTE_10.1.A.1.350
19/006/2013 04:06:02 - INFO - Start Flashing
19/006/2013 04:06:02 - INFO - Processing loader
19/006/2013 04:06:02 - INFO - Checking header
19/006/2013 04:06:02 - INFO - Flashing data
(It doesn't get pass this step and stays at 0%)
I found out that i was not using the Beta5 version which is the one indicated for the Xperia Z and now im facing a different problem,
The phone doesn't stay in flashmode for more than some 30 seconds, then it disconnects and boots normally and i still can't flash the phone.
smash_07 said:
I found out that i was not using the Beta5 version which is the one indicated for the Xperia Z and now im facing a different problem,
The phone doesn't stay in flashmode for more than some 30 seconds, then it disconnects and boots normally and i still can't flash the phone.
Click to expand...
Click to collapse
Yes it is, it happens for all xperia models
Ll give you the idea
1. Install flashtool beta 5
2. Install Xperia Z flashmode and fastboot drivers from drivers folder of flashtool installation directory
3. Copy the ftf to firmwares folder
4. Don't connect the phone, now flash the ftf and wait till it prepares the files for flashing (believe me this WILL take a while)
5. Now when it asks to connect after preparing, switch off the device and connect by pressing the volume down button
6. Now it starts! Solved?
Press THANKS if I helped!
Sent from my C6602 using xda premium
gire.prasad said:
Yes it is, it happens for all xperia models
Ll give you the idea
1. Install flashtool beta 5
2. Install Xperia Z flashmode and fastboot drivers from drivers folder of flashtool installation directory
3. Copy the ftf to firmwares folder
4. Don't connect the phone, now flash the ftf and wait till it prepares the files for flashing (believe me this WILL take a while)
5. Now when it asks to connect after preparing, switch off the device and connect by pressing the volume down button
6. Now it starts! Solved?
Press THANKS if I helped!
Sent from my C6602 using xda premium
Click to expand...
Click to collapse
Thank you for that guide
I followed your steps but the same happens, phone disconnects from flashmode to boot normally. I even tried using a Windows 7 pc but same issue.
However, if I use SUS phone remains connected and the process runs well. If i connect with flashtool (or without any programme at all) it will disconnect after some seconds,
smash_07 install pc companion and go through the steps for doing a software repair it will install the drivers, as the drivers dont always install properly from the flashtool drivers folder even though it says there installed, once the s1 boot drivers have installed cancel the software repair and then open flashtool and go through the normal steps and you should find it'll start flashing the software for you, as I had problems like you until I did what I posted, also make sure there is no other sony apps running as that can stop the flash from starting.
Sent from my C6603 using xda app-developers app
smash_07 said:
Thank you for that guide
I followed your steps but the same happens, phone disconnects from flashmode to boot normally. I even tried using a Windows 7 pc but same issue.
However, if I use SUS phone remains connected and the process runs well. If i connect with flashtool (or without any programme at all) it will disconnect after some seconds,
Click to expand...
Click to collapse
Confused, it is normal that it gets disconnected after some time but it is so peculiar that it disconnects so fast! Try the solution posted by the other guy and share the solution, ll figure out another way if it fails
Ps: Before starting flashtool make sure that adb isn't running. Open task manager in windows, kill adb.exe if present and then open flashtool, follow the guide I posted earlier and when the part comes that the preparation of files is complete and when you connect your device, make sure that none of sony related apps are running (sus, pcc, emma). If they do, EXIT them first (closing them will minimise them to system tray so exit them from there). This also can be done before opening flashtool.
Sent from my C6602 using xda premium
I did all you suggested but in the end i get always the same result, phone disconnects from flashboot shortly after connecting, eccept inside Sony Update Service or PC Companion.
I unistalled all the drivers, even Sony's apps a reinstalled PC companion to install the drivers again. I used another pc with Windows 7 32bits and I get the same behavior, disconnects from flashmode in about 30 seconds.
I'm starting to think that there's someting wrong with the phone itself, which i hope not.
smash_07 said:
I did all you suggested but in the end i get always the same result, phone disconnects from flashboot shortly after connecting, eccept inside Sony Update Service or PC Companion.
I unistalled all the drivers, even Sony's apps a reinstalled PC companion to install the drivers again. I used another pc with Windows 7 32bits and I get the same behavior, disconnects from flashmode in about 30 seconds.
I'm starting to think that there's someting wrong with the phone itself, which i hope not.
Click to expand...
Click to collapse
Where do you see the percentage when flashing?
I made a tutorial on HOW TO FLASH STOCK ROMs WITH FLASHTOOL and I don't see the percentage. It justs tells me that flashing is complete.
shadowboy23 said:
Where do you see the percentage when flashing?
I made a tutorial on HOW TO FLASH STOCK ROMs WITH FLASHTOOL and I don't see the percentage. It justs tells me that flashing is complete.
Click to expand...
Click to collapse
The issue has changed now, the percentage was because i was not using the correct flashtool version for the the Z.
The problem now is the phone disconnecting from flashmode in about 30 secs after connecting and flashtool never gets to start flashing it,
EDIT: Changed the thread title to reflect the new issue now.
smash_07 said:
The issue has changed now, the percentage was because i was not using the correct flashtool version for the the Z.
The problem now is the phone disconnecting from flashmode in about 30 secs after connecting and flashtool never gets to start flashing it,
EDIT: Changed the thread title to reflect the new issue now.
Click to expand...
Click to collapse
Have you installed the driver using the flashtool? Not talking about the PC companion driver?
shadowboy23 said:
Have you installed the driver using the flashtool? Not talking about the PC companion driver?
Click to expand...
Click to collapse
I tried both ways, with the flashtool drivers and pc companion ones.
Am confused, 30 secs is more than enough to start the flashing process, are you saying that the flashing doesn't start in 30 secs? If so, that's why I told you not to connect the phone at start and after the preparation of files is complete and when it asks you to connect, try connecting and immediately the process should begin. Even if you have connected the device before, no probs. Flashtool don't need the phone till preparation of files is complete, so you disconnect whenever befor you want, the time where it pops a popup asking you to connect the device (shows an animation) is where you should properly conmect and leave it aside. It will and it should start immediately
Sent from my C6602 using xda premium
Got the problem!
It was the firmware package that is corrupted. I tried using the UK .434 instead and it flashed with no problems or hickups. So the drivers and the phone were working well all along and the problem was where we less expected, in the firmware package.
I got the UK .350 firmware from here so there must be an error that has to be addressed with it.
Many thanks for your help
Glad you made it, cheers!
Sent from my C6602 using xda premium
I found that running the 32 bit version of Flashtool solves the problem as well.
me too but my phone is TX, using flashtool 0.9.19.8
Hi all, if anyone is having trouble flashing with flash tool because usb debugging isn't enabled error then do this procedure.......
1. Dowload latest flash tool 0.9.18.8 and also version 0.6.6
2. Try use the latest version first to Flash the tft rom. NOTE: remember the file it has error flashing e.g on my experia sp file system.sin was not able to Flash bcoz usb debugging error (enable usb debugging and unknown sources) ALL THE REST of the files flashed ok!
3.try flash again the rom but this time tick system.sin (or error file) in flashtool to exclude it from flashing. Make sure all other files are included. Also tick all wipe caches options and flash rom without system.sin (or error file).
4. Flash procedure will work. Now disconnect phone and leave it off without restarting it.
5. Uninstall flashtool latest version 0.9.18.8 and install flashtool 0.6.6 old version and open it to Flash the same rom BUT THIS TIME only select the system.sin file (or error file) to be flashed and rest excluded. Make sure all wipe options in flashtool are enabled and Flash! THE FLASH WILL WORK WITHOUT USB DEBUGGING ERROR and your phone will be fixed!
Press thanks if it helped!
hey i am having same problem with sony xperia m dual c2004. During flashing in flashtool 0.9.13-22 all version tried i got same error 31 (A device attached is not functioning). Problem is my device auto disconnect after 30 second and reconnect in 3 second and this process goes in loop. On usb connect green led blink once and than no light for 30 second. My device is not functioning it has bootloop issue. Tried ftf files version 15.1.A.1.5 and 15.1.A.2.5 both give same results. Is this a hardware problem or i am doing some mistake. Please give me solution i am new here. Thanks in advance...
Hello everyone!
My Xperia T LT30P is stuck at "device encrytion failed please reset" everytime I turn it on. The "Reset Device" button on this screen doesn't do anything when tapped.
I tried to flash 7.0.A-Global firmware via Flashtool but it always gets stuck here at 0%:
21/009/2013 12:09:46 - INFO - Loader : S1_Root_7054 - Version : R5F001 / Bootloader status : ROOTABLE
Is there anything else I should try?
Thanks a lot for reading.
flash a latest version of JB,
or better yet, install PCCompanion (Just google it) and repair your phone that way
sikander3786 said:
Hello everyone!
My Xperia T LT30P is stuck at "device encrytion failed please reset" everytime I turn it on. The "Reset Device" button on this screen doesn't do anything when tapped.
I tried to flash 7.0.A-Global firmware via Flashtool but it always gets stuck here at 0%:
21/009/2013 12:09:46 - INFO - Loader : S1_Root_7054 - Version : R5F001 / Bootloader status : ROOTABLE
Is there anything else I should try?
Thanks a lot for reading.
Click to expand...
Click to collapse
did you try Phone Repair option in PC Companion?
Thanks for your replies.
I have also tried LT30p_9.1.A.1.140_CE_Skyfall.ftf but same result. I have also tried different versions of flashtool.
PC Companion can't detect my phone. I have tried 2 different computers and each one is stuck on install MTP drivers. I guess unless the drivers are installed, PC companion won't detect it.
I have also tried connecting the phone in flash mode but PC companion asks to restart the phone in normal mode.
run the driver.exe file in the flashtool installation folder.
choose fastboot, flashmode and tx drivers
try again with pccompanion
gregbradley said:
run the driver.exe file in the flashtool installation folder.
choose fastboot, flashmode and tx drivers
try again with pccompanion
Click to expand...
Click to collapse
PC companion still can't detect the phone. I have installed/re-installed all the drivers you mentioned.
As Flashtool isn't able to flash the .ftf firmware to the phone, is there any other firmware available that can be flashed via fastboot?
No.
Try downloading Sony's EMMA program and repairing with that
Sent whilst sat on the toilet.
gregbradley said:
No.
Try downloading Sony's EMMA program and repairing with that
Sent whilst sat on the toilet.
Click to expand...
Click to collapse
Thanks for your suggestion.
Seems like EMMA only works with unlocked bootloaders. And my Xperia T can't be unlocked as USB debugging is off and there is no way I can turn it back on.
Further help needed, please.
Hi.
I have problem with my Xperia Z C6603. After an update from PC Companion, phone doesn't start, because of bootloop. It show xperia logo and after turns into a black screen.
In past I was using stock 4.4 android with unlocked bootloader, but I restored TA Partition and I think that messed up the update.
I tried to repair software in PC Companion, but that didn't help. Effects - the same as before. When I try to flash new firmware in Flashtool it show "Processing of loader.sin finished with errors" and abort. I tried on different PC and tft but it's the same. Drivers are installed.
Do you have any ideas how to solve my problem? I will be very grateful.
PS Sorry for my English - I'm not native speaker
Gustlik11 said:
Hi.
I have problem with my Xperia Z C6603. After an update from PC Companion, phone doesn't start, because of bootloop. It show xperia logo and after turns into a black screen.
In past I was using stock 4.4 android with unlocked bootloader, but I restored TA Partition and I think that messed up the update.
I tried to repair software in PC Companion, but that didn't help. Effects - the same as before. When I try to flash new firmware in Flashtool it show "Processing of loader.sin finished with errors" and abort. I tried on different PC and tft but it's the same. Drivers are installed.
Do you have any ideas how to solve my problem? I will be very grateful.
PS Sorry for my English - I'm not native speaker
Click to expand...
Click to collapse
For now unlock the bootloader again. It'll wipe the TA. I had the same issue but sony repair service (PC) helped. Try unlocking then reflash.
Note: TA partition - DRM keys are unique for each device, flashing TA from another xperia z will result in bricking the device.
If it works with unlocked BL and you still want to restore TA look for a tutorial (maybe your TA got messed up).
Note2: if it works you could use DRM function Restore MOD - it restores the functionality of the DRM content and it really works (eg. Advanced camera functions, bravia engine, etc etc.).
Thanks mate for advice. I unlocked bootloader and flashed custom kernel with recovery. I managed to flash a CM 12 and now phone works.
But the problem is still that I cant flash stock rom. I tried a few different versions of lollipop, and no matter which I flash, I get black screen and bootloop. Do I have to relock bootloader to get it work?
I'm running on stock 5.1.1 on UB with Zombie kernel, try to repair it with PC Companion, it have integrated SUS so you can flash even if you phone isn't booting and should fix it.
Good Luck.
Sent from my D2303
Just as the title said I tried to flash stock firmware to my xperia tx but it stuck at checking header. I guess my phone was soft bricked while I tried to install a custom rom. I failed to install it but then when I reboot it, my phone couldn't boot to the recovery. Now when I try to turn it on it'll just show the sony logo and then it goes blank.
Then I tried flashtool i've already downloaded the firmware and driver. But everytime I tried to flash it, it stuck at checking header. At first I tried to wait for it because I don't know how long it takes (newbie here). But i've waited for an hour and still nothing happened... please someone help me
clavian123 said:
just show the sony logo and then it goes blank.
Click to expand...
Click to collapse
Bootloop. Sony logo for 30 sec and restart ?
clavian123 said:
But everytime I tried to flash it, it stuck at checking header.
Click to expand...
Click to collapse
You need a clean installing Windows without antiviruses & Sony PC Companion.
Backup currently system with Acronis, MAcrium or another.
Rollback system(if W10) or install again.
Install Sony PC Companion and going to recovery phone. At last stage connect phone with flashmode.
Waiting for installing SEMC Driver to your system.
If bootloader is unlocked, Sony PC Companion showing an error.
Exit Sony PC Companion in tray.
Downloading FlashTool, blocking bootloader and install original firmware.
WArning: dont install any antiviruses software.
REcover your PC system from backup/