HELP ME OUT GUYS, IM TRYING TO FLASH THE WM6 ROM TO A CINGULAR 8125: IPL 2.25, SPL 2.25 AND SEEM TO BE STUCK IN BOOTLOADER MODE. I FIRST GOT AN UPDATE ERROR AT 99%, PERFORMED RECOVERY - AND GOT THE SAME ERROR AGAIN. NOW THE RUU WON'T EVEN START AND I GET ERROR 264 : CONNECTION ERROR. ACTIVE SYNC NO LONGER IS GREEN, ETC. I DOWNLOADED THE XDA MOBILE 6r2a.zip FROM THIS SITE. NOT SURE WHAT I DID WRONG. I THINK I NEED TO GET BACK TO AN ORIGINAL ROM AND START ALL OVER BUT NOT SURE WHERE I CAN FIND ONE. THANKS.
ditto
ensophalic said:
HELP ME OUT GUYS, IM TRYING TO FLASH THE WM6 ROM TO A CINGULAR 8125: IPL 2.25, SPL 2.25 AND SEEM TO BE STUCK IN BOOTLOADER MODE. I FIRST GOT AN UPDATE ERROR AT 99%, PERFORMED RECOVERY - AND GOT THE SAME ERROR AGAIN. NOW THE RUU WON'T EVEN START AND I GET ERROR 264 : CONNECTION ERROR. ACTIVE SYNC NO LONGER IS GREEN, ETC. I DOWNLOADED THE XDA MOBILE 6r2a.zip FROM THIS SITE. NOT SURE WHAT I DID WRONG. I THINK I NEED TO GET BACK TO AN ORIGINAL ROM AND START ALL OVER BUT NOT SURE WHERE I CAN FIND ONE. THANKS.
Click to expand...
Click to collapse
That was the same rom that toasted my Qtek 9100 and now I'm stuck at the 99% mark before I get update:[302] error. Sorry didn't mean to steal your thread m8 but when I aksed the forum if they could help me out I got zero response ...so mines a brick right now.
BTW: I've tried the Wizard Love ROM but that was spanish I think and comes up with "INVALIDO" or something similar. I've fully charged the battery, removed the SD card and disabled "allow USB connections" in activesync, along with killing off wcescomm.exe ...but still no joy. Hope you get sorted with yours soon.
Original ROM's are easy to find, just go to either your phone service providers website and it should be on there, or go to HTC's website and they'll either have it or have links to where you can get it. Before you tried flashing XM6r2a, did you CID unlock your phone? That may be your problem.
ADD+, your phones not a brick yet if you can get in to the bootloader, which since you said that you tried to flash the wizard love ROM I'm guessing you can still do. You should also re-flash the original ROM that was on there and see if you can at least get that one to load back on there.
Also, for Original ROM links try this link - http://wiki.xda-developers.com/index.php?pagename=Wizard_Upgrades
xeno1 said:
Original ROM's are easy to find, just go to either your phone service providers website and it should be on there, or go to HTC's website and they'll either have it or have links to where you can get it. Before you tried flashing XM6r2a, did you CID unlock your phone? That may be your problem.
ADD+, your phones not a brick yet if you can get in to the bootloader, which since you said that you tried to flash the wizard love ROM I'm guessing you can still do. You should also re-flash the original ROM that was on there and see if you can at least get that one to load back on there.
Also, for Original ROM links try this link - http://wiki.xda-developers.com/index.php?pagename=Wizard_Upgrades
Click to expand...
Click to collapse
Got mine fixed by using the Xda_MiniS_LaunchROM_v154102.exe from the link in the definitive guide sticky. So as they say RTFM!!
Hi I have an AT&T Tilt2. Ive been trying to flash it for about a month now. I was able to flash my pure without a single issue. I have loaded SSPL ran it on my phone then started manual flash. It Jumps from 0% to 100% then shows Error [266] Flash Write and says IU434 in the bottom corner of HardSPl. I have searched and searched and cannot figure out what im doing wrong. Any help would be greatly appreciated. If this has already been brought up and solved please point me to it. Thanks in Advance.
Why not just let the pros unlock your Tilt2?
Im not wanting to unlock it i just want to flash a different rom to it.
Problem solved i finally got it.
I've done many flashes before. Maybe 1 too many (if possible???). I just flashed it and it seems to be stuck at the "update in progress..." screen, but it's at 99 -100% and it hasn't moved. I reflashed it 3 times and it's still stuck at this stage. I already HardSPLed it and i'm using energy rom. Do you guys have any idea what could be wrong? could it be because i flashed my phone too many times? i think i flashed it a total of 25+ times because after a certain point the phone starts to glitch up so i need a new flash... and i also like to keep updated..
please help! thank you in advance!
btw, I'm flashing via sdcard
Try RUU
Dear friend,
I had the same situation with my old Tytn II.
This is my recommendation:
If you have already done the HARD Spl,which is great,now do the following:
Go to the OFFICIAL HTC site and grab the latest stock 2.07 ROM.
Download it and you will get the RUU with it. RUU ( Rom Update Utility). Updating with RUU usually solves many problems when phones stuck at boot or whatever.
Follow the instructions in RUU and flash stock ROM.
But BEFORE you do anything,REMOVE that SD card with Energy ROM on it.
Please let me know if I was helpful.
Good luck,
Alexander.
E:Board does not support mtd utils.E:Failure atline 77:
write_raw_image PACKAGE:boot.img BOOT:
Installation aborted.
Hi im new to this forum, im usually on nexus one forums.net But i cant find a answer there and i tried everything to get my phone back to stock. I keep getting this error(above) when i update to the FRF91 stock image with no radio? I need to send in the phone to htc for warranty, i got my new one already but i have a hard time reverting it to stock any help will be greatly appreciate
Any help would be greatly appreciated!
You don't need to send it back to them with a stock firmware.
ive tried everything to get back to stock to take S-off. but ive tried flashing gurus 3.39 it seems to boot but i get a fc Qualcomm.adroid process i tried using firewater with a slimkat rom but it wont go past opening the first bottle. i flashed gurus 1.29 and also 1.31 and i have no touch screen im stuck and i dont know what to do. i wont give up though can someone help me out please! and i tried using firewater but my device has no internet connection since the touch wonr work