Database Develop

[Q] Need some help BSOD/bootloop guys

Hi guys,
I am flashing my gf's phone and tried to root the phone first. Flashed a 'PDA' file in ODIN as the guide said.
Now my Galaxy S has the BSOD (Black Screen Of Death) logo. I can still go into the Download-mode, so i guess there is no need for panic.
I read a lot of guide's and faq's here at XDA, and I think I am supposed to flash new firmware via ODIN (with a PIT, PDA, PHONE and CSC file).
My problem is that all the links to this firmware are down or dead, Argh!
Can you provide me a working link with the right and some advice?
BTW, I flashed my HD2, and HTC Sensation many times before, but I am new to flashing Samsungs.

When you flashed the PIT file I assume that you selected repartition?
The PIT file contains the "Drive" layout when you select repartition it will completely wipe the phone as you have found out.
If the phone is able to boot into download mode you will be able to flash another ROM.
I would suggest Darky's 10.2 as this is a odin flashable ROM and it is based on the Samsung stock ROM's.
If you use Darky's you do not have to root the phone before flashing as Darky's complete ROM includes root standard.
Most of the new custom ROM's do not require root before hand as root is included unless the thread states other wise

Phone doesn't open or enter CWM

Hello,
after a failed recovery my phone doesn't want to open regularly or in CWM (both just doesn't respond)
the only thing that work is Downloading mod, tried to use odin and a fresh PIT (are there a few of them or just one option)
but that didn't work either,
really don't know what i could do now, will love some help or guiding
thank you
or

Hello,
try to flash a cf-root-kernel via Odin 1.3 ... without pit
Kernels here:
http://forum.xda-developers.com/showthread.php?t=788108&highlight=cf-root
Or a new ROM with included cf-root ...

[Q] Help problem with Note N7000

Flashed Revolt rom without wiping data factory and got stuck with the revolt logo. Factory wipe was not happening and then i installed abyss kernel and was able to wipe factory, but was not able to flash revolt with it. Installation aborted.
tried to flash stock rom with odin but stuck at nand write...please help.

Try with hydracore kernel.

nokiamodeln91 said:
Try with hydracore kernel.
Click to expand...
Click to collapse
do i need to flash with some pit file coz of nand write?

Original pit file from Dr Ketan thread in Android original Dev section. But I would say change kernel using recovery mode and try flashing any custom rom again

My advice its before messing up your device.. Start fresh.. Flash GB stock with Odin.. And start from there
Tapatalking on my n7000

Done....downloaded a pit file and flashed it with stock rom...done....

now the problem is that though i flashed with odin with a pit file and i got to get the stock rom
but during flash odin showed Can't open the serial(COM) port two times and passed the flashing
now the mobile is too slow and hanging a lot....any solutions for this?

you should install a kernel with CWM and scan the emmc with HG42's partition scanners.

[Q] Flashing doubt in Odin3 v1.85

I'm coming from ICS4.0.4 XLR1, speedmod kernel k3-13. Been flashing and staying with this kernel for about 5 months as it is a good and stable kernel that I came across.
Upgraded to JB 4.1.2 XLS8, speedmod kernel k5-3. I noticed I got additional flashing message in Odin3 v1.8 when I'm flashing from ics to jb.
>>Firmware update start.
>>zImage
>>NAND Write Start!!
>>modem.bin
>>hidden.img
>>factoryfs.img
>>cache/img
>>RQT_CLOSE!!
>>RES OK!!
>>Completed..
>>All threads completed!
>>Removed!!
Theoretically, the flashing should be start from NAND Write Start to RQT_CLOSE. Not sure why I got the additional paths before finishing....One thing that I observed is I can't upgrade to JB using OTA and Kies.....My thought was it's created a brand new hidden, factoryfs and cache image file while during the flashing.....Any comments from u guys??

The log you provided is normal.. enough said
Sent from my GT-N7000 using Tapatalk 2

Finally found some interesting notes/explanation under "How to revive your bricked Gnote", thanks Forest and the folks there...

figo007 said:
I'm coming from ICS4.0.4 XLR1, speedmod kernel k3-13. Been flashing and staying with this kernel for about 5 months as it is a good and stable kernel that I came across.
Upgraded to JB 4.1.2 XLS8, speedmod kernel k5-3. I noticed I got additional flashing message in Odin3 v1.8 when I'm flashing from ics to jb.
>>Firmware update start.
>>zImage
>>NAND Write Start!!
>>modem.bin
>>hidden.img
>>factoryfs.img
>>cache/img
>>RQT_CLOSE!!
>>RES OK!!
>>Completed..
>>All threads completed!
>>Removed!!
Theoretically, the flashing should be start from NAND Write Start to RQT_CLOSE. Not sure why I got the additional paths before finishing....One thing that I observed is I can't upgrade to JB using OTA and Kies.....My thought was it's created a brand new hidden, factoryfs and cache image file while during the flashing.....Any comments from u guys??
Click to expand...
Click to collapse
I get the same path so it seems to be normal.
If I helped you please press "Thanks", and if you helped I will do the same

Stuck at bootscreen Please Help !!

Hello Everyone I have GT N7000 XXLTA 4.1.2. I tried to root it using Odin flashing Philz-XXLTA-OXA.5.15.0.tar.md5. after showing pass message in odin binary changed into custom but phone not rooted. Afterwards I factory reset my phone and it is stuck at boot screen with yellow triangle. I can go in download mode.
Help me out please !! How to recover my phone ? You people are the only help !!
HELP ME OUT !!
Thank you !!

Flash original rom again via Odin and after first full boot into stock rom the root file via stock recovery.

User_99 said:
Flash original rom again via Odin and after first full boot into stock rom the root file via stock recovery.
Click to expand...
Click to collapse
Thanks for replying !!
Can I flash any stock rom available at samfirmware.com or specific one like XXLTA 4.1.2 ?

Best is a Rom for your country.