Related
Hello,
It had the original rom 4.4 on my XT1058 with root and unlocked bootloader, but was not getting running with 4.4.2 update for the original recovery. So I was going to be able to update and run fasthall.bat back to 4.2.2, but I opened the file and rebooted the machine to backup and forgot that it was open. Result: ****ed me.
I believe I have lost my bootloader, but following the tutorial of Gundabolu SC, unable to enter fastboot again, however, I can not run the sbf or RSD by flashall.bat.
I noticed that my phone with this LOCKED status, though I unlocked it.
To start the fastboot I run the code the tutorial I mentioned above, then it displays the following screen
Code:
[COLOR="Red"]Failed to hab check for gpt_main: 0x4e
CID Read Failure
Invalid CID Status 0x69
CustomerID error. Contact Dealer: 0xdead
No SP Partition found[/COLOR]
[COLOR="DarkOrange"]Fastboot Reason: Invalid CID[/COLOR]
For both methods to recovery, it becomes part of gpt.bin and when arrives at motoboot, of the following error message:
Code:
[COLOR="DarkOrange"]getvar max-download-size
downloading 32768 bytes
done
getvar max-download-size
downloading 1643008 bytes[/COLOR]
[COLOR="Red"]downgraded security version
update aboot version failed[/COLOR]
Can anyone help me?
------------
Problem solved thanks to XDA's amazing users!
feelknOck said:
Hello,
It had the original rom 4.4 on my XT1058 with root and unlocked bootloader, but was not getting running with 4.4.2 update for the original recovery. So I was going to be able to update and run fasthall.bat back to 4.2.2, but I opened the file and rebooted the machine to backup and forgot that it was open. Result: ****ed me.
I believe I have lost my bootloader, but following the tutorial of Gundabolu SC, unable to enter fastboot again, however, I can not run the sbf or RSD by flashall.bat.
For both methods, it becomes part of gpt.bin and when arrives at motoboot, of the following error message:
Code:
downgraded security version
aboot version update failed
Can anyone help me?
Click to expand...
Click to collapse
You can try go to this link Hope it helps
http://forums.androidcentral.com/mo...7371-unroot-unbrick-your-phone-using-sbf.html
---------- Post added at 04:31 PM ---------- Previous post was at 04:18 PM ----------
Did it worked??S i am too not quite sure about this??
manav113 said:
You can try go to this link Hope it helps
http://forums.androidcentral.com/mo...7371-unroot-unbrick-your-phone-using-sbf.html
Click to expand...
Click to collapse
I tried to recover via RSD several times, both with 4.4, as 4.2.2, but both have the same error.
In the RSD panel the following error message:
Code:
Failed flash process. 2/13 flash mootboot "motoboot.img" -> Phone returned FAIL.
quite a different error.NEVER heard of it>Wait let me ask my friends about it..
manav113 said:
quite a different error.NEVER heard of it>Wait let me ask my friends about it..
Click to expand...
Click to collapse
the issue is the bootloader you are trying to install dose not match the one installed so it will fail everytime we have to find the right one to get everything installed correct
so we need to grab the 100% correct firmware package for your phone.
the model you gave me is for the AT&T version
here is the 4.4 AT&T firmware try installing this one
http://sbf.droid-developers.org/download.php?device=0&file=4
let me know the outcome.
dray_jr said:
the issue is the bootloader you are trying to install dose not match the one installed so it will fail everytime we have to find the right one to get everything installed correct
so we need to grab the 100% correct firmware package for your phone.
the model you gave me is for the AT&T version
here is the 4.4 AT&T firmware try installing this one
http://sbf.droid-developers.org/download.php?device=0&file=4
let me know the outcome.
Click to expand...
Click to collapse
I'm downloading and post the result. 202 KB/s
Thank you!
-
dray_jr said:
the issue is the bootloader you are trying to install dose not match the one installed so it will fail everytime we have to find the right one to get everything installed correct
so we need to grab the 100% correct firmware package for your phone.
the model you gave me is for the AT&T version
here is the 4.4 AT&T firmware try installing this one
http://sbf.droid-developers.org/download.php?device=0&file=4
let me know the outcome.
Click to expand...
Click to collapse
Sorry for double post there.
I remember that my device is the XT1058, but Brazil.
I downloaded the sbf, removed the max-download-size and run the RSD, but he brought me the same errors.
Sounds like you need to wait for the full 4.4.2 Brazil image to be posted for download to recover the phone.
Steve-x said:
Sounds like you need to wait for the full 4.4.2 Brazil image to be posted for download to recover the phone.
Click to expand...
Click to collapse
Excuse me, but why do you think?
I did not get to install 4.4.2, I started to run the script flashall.bat 4.2.2 and thinking it would give time, it ended up damaging the bootloader.
Tried the firm indicated that dray_jr and 2 BR's, but it did not work.
I am very worried.
Did you try this, sounds like your trying to flash 4.2.2 firmware over 4.4.2 which won't work http://forum.xda-developers.com/showthread.php?t=2628940
Sent on my Gummy running Lenoto X
Do you get the "downgraded security version" error when trying to flash 4.2.2 and 4.4 ?
flashallthetime said:
Did you try this, sounds like your trying to flash 4.2.2 firmware over 4.4.2 which won't work http://forum.xda-developers.com/showthread.php?t=2628940
Sent on my Gummy running Lenoto X
Click to expand...
Click to collapse
I was going to try and probably would work (I've done this several times and has no secret), but it was not to start. I opened flashall.bat script but forgot to close it, because it was going back up yet, but the script detected the fastboot and started the process.
With seconds I removed the cable, barely gave it to start the first stage (before I left without turning back) and corrupted my bootloader.
I had the Original ROM 4.4 installed with root and unlocked bootloader, but even trying the 4.4 firmware I get the errors I described above.
Would have something to do with the tutorial I follow to start the fastboot?
I am Brazilian and even translating and reading what little I understand, I can not identify a problem as well. I'm scouring all here and trying something, but like I said, I am a layman and do not understand how the bootloader and related work.
Steve-x said:
Do you get the "downgraded security version" error when trying to flash 4.2.2 and 4.4 ?
Click to expand...
Click to collapse
With 2 firmwares I get the same error.
everytime i post here i reread the first thread and i am still not sure what you did.
so im going to ask some questions and see if we can't get some more info on this issue
1. Your device was 4.4 unlocked bootloader and rooted
2. did you try and install the 4.4.2 firmware
3. your device is the AT&T model but from Brazil
because if you are getting the gpt error on both 4.2.2 and 4.4 and it would lead me to think that the 4.4.2 bootloader is installed on your device.
dray_jr said:
everytime i post here i reread the first thread and i am still not sure what you did.
so im going to ask some questions and see if we can't get some more info on this issue
1. Your device was 4.4 unlocked bootloader and rooted
2. did you try and install the 4.4.2 firmware
3. your device is the AT&T model but from Brazil
because if you are getting the gpt error on both 4.2.2 and 4.4 and it would lead me to think that the 4.4.2 bootloader is installed on your device.
Click to expand...
Click to collapse
He removed the cable as it was flashing, can you get to the fastboot screen?
Sent on my Gummy running Lenoto X
dray_jr said:
everytime i post here i reread the first thread and i am still not sure what you did.
so im going to ask some questions and see if we can't get some more info on this issue
1. Your device was 4.4 unlocked bootloader and rooted
2. did you try and install the 4.4.2 firmware
3. your device is the AT&T model but from Brazil
because if you are getting the gpt error on both 4.2.2 and 4.4 and it would lead me to think that the 4.4.2 bootloader is installed on your device.
Click to expand...
Click to collapse
1. Yes, I was running 4.4 with unlocked bootloader and rooted
2. I installed the original recovery to try the OTA update for version 4.4.2, but he returned me error halfway through the update, because my ROM was modified. That's when I thought of going back to 4.2.2 without changes and run the 4.4.2.
3. My device is the XT1058 Retail Brazil.
flashallthetime said:
He removed the cable as it was flashing, can you get to the fastboot screen?
Click to expand...
Click to collapse
Yes, I can start the fastboot via script "qflash.exe with (PORT NUMBER)-ramload MPRG8960.hex-mbn 33 MSM8960_bootloader_singleimage.bin-v-o" with a blank bootloader.
feelknOck said:
1. Yes, I was running 4.4 and unlocked bootloader routed.
2. I installed the original recovery to try the OTA update for version 4.4.2, but he returned me error halfway through the update, because my ROM was modified. That's when I thought of going back to 4.2.2 without changes and run the 4.4.2.
3. My device is the XT1058 Retail Brazil.
Yes, I can start the fastboot via script "qflash.exe with (PORT NUMBER)-ramload MPRG8960.hex-mbn 33 MSM8960_bootloader_singleimage.bin-v-o" with a blank bootloader.
Click to expand...
Click to collapse
ok if i remember well first flash recovery from 4.4 firmware
mfastboot flash recovery recovery.img
after then u ll be able to flash entire image of 4.4.2
could it be that even thou the 4.4.2 update failed that it still installed the new bootloader and that is why nothing else will install.
but either way he could flash the 4.4 firmware without the gpt file and then take the OTA and everything should be fine.
danger2u said:
ok if i remember well first flash recovery from 4.4 firmware
mfastboot flash recovery recovery.img
after then u ll be able to flash entire image of 4.4.2
Click to expand...
Click to collapse
Before having this problem I tried all that.
I installed the original recovery and tried to upgrade to 4.4.2 but it gave error in the middle of the update and restarted the phone saying that the software update was not completed.
dray_jr said:
could it be that even thou the 4.4.2 update failed that it still installed the new bootloader and that is why nothing else will install.
but either way he could flash the 4.4 firmware without the gpt file and then take the OTA and everything should be fine.
Click to expand...
Click to collapse
I will remove the line from gpt and try again.
Earlier I was testing at work and now I'm home. The 4.4 firmware download this lingering: (
you really can't cause anymore problems so this is what i would try because from what i have read if you try to install 4.2.2 or 4.4 you the a gpt.bin verification error. which means that neither 4.2.2 or 4.4 are the right bootloader.
That leaves us with some how the 4.4.2 bootloader got installed because it is the only bootloader that can't go to 4.4 so with that being said.
I would download the correct 4.4 firmware for your phone.
extract it
and use the below adb commands to install it but leave out the gpt.bin flash command
Code:
*leave this one out*fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
mfastboot flash system system.img
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot reboot
i think everything should install fine and your phone should boot up and from what i have read you should still be able to take the 4.4.2 OTA without bricking your phone
Hi
I have been playing around with my Atrix HD for quite a while now, installing almost all custom roms out there for MB866 (Found Gummy and Carbon to be the best, batakang and holoblur never worked for me).
Restored back to stock using RSD Lite many times (after editing the xml file, no problems)
The bootloader was of course unlocked during "all that".
Now here is the problem. After restoring to stock 4.1.1 (98.4.20.MB886.ATT.en.US) using RSD Lite, I updated to 98.5.38.MB886.ATT.en.US (small 6.2 MB Update recently released).Worked fine till here.
Then I downgraded to ICS and it also worked fine. What made things worse was when I checked for updates via About Phone--> System Updates and it prompted for an Update 98.4.20.MB886.ATT.en.US (the same i used to flash via RSD). But when the download finished, the phone is permanently stuck in fastboot mode with the following message:
----------------------------------------------
AP Fastboot Flash Mode (s)
10.9B(*) (sha-2e68372, 2012-11-17 23:33:08)
eMMC Info: Size 8GB
Device is LOCKED. Status Code:0
Battery OK
Transfer Mode: USB Connected
downgraded security version
update gpt_main version failed
Failed to hab check for gpt_backup: 0x35
failed to load GPT
CID Read Failure
Invalid CID Status 0x69
No SP Partition found
Fastboot Reason: Invalid GPT
----------------------------------------------
You can see the phone is locked and RSD Lite doesent work at all giving "phone returmed fail" or " invalid partition error (battery is charged atleast 70%).
Any help in restoring the phone to "something" will be highly appreciated.
One of the problem is that i cannot find stock files for the latest 98.5.38.MB886.ATT.en.US update anywhere
Secondly is there any way to unlock Bootloader in fastboot?
capricorn85 said:
Hi
I have been playing around with my Atrix HD for quite a while now, installing almost all custom roms out there for MB866 (Found Gummy and Carbon to be the best, batakang and holoblur never worked for me).
Restored back to stock using RSD Lite many times (after editing the xml file, no problems)
The bootloader was of course unlocked during "all that".
Now here is the problem. After restoring to stock 4.1.1 (98.4.20.MB886.ATT.en.US) using RSD Lite, I updated to 98.5.38.MB886.ATT.en.US (small 6.2 MB Update recently released).Worked fine till here.
Then I downgraded to ICS and it also worked fine. What made things worse was when I checked for updates via About Phone--> System Updates and it prompted for an Update 98.4.20.MB886.ATT.en.US (the same i used to flash via RSD). But when the download finished, the phone is permanently stuck in fastboot mode with the following message:
----------------------------------------------
AP Fastboot Flash Mode (s)
10.9B(*) (sha-2e68372, 2012-11-17 23:33:08)
eMMC Info: Size 8GB
Device is LOCKED. Status Code:0
Battery OK
Transfer Mode: USB Connected
downgraded security version
update gpt_main version failed
Failed to hab check for gpt_backup: 0x35
failed to load GPT
CID Read Failure
Invalid CID Status 0x69
No SP Partition found
Fastboot Reason: Invalid GPT
----------------------------------------------
You can see the phone is locked and RSD Lite doesent work at all giving "phone returmed fail" or " invalid partition error (battery is charged atleast 70%).
Any help in restoring the phone to "something" will be highly appreciated.
One of the problem is that i cannot find stock files for the latest 98.5.38.MB886.ATT.en.US update anywhere
Secondly is there any way to unlock Bootloader in fastboot?
Click to expand...
Click to collapse
"fastboot oem fb_mode_clear" should get it to stop booting into fastboot mode
The problem is the gpt partition is security locked and one of the fastboot commands thrown is to lock the phone into fastboot mode for every boot until the flashes are done. The command above is the one used to revert the first one (fastboot oem fb_mode_set if you're curious). Your bootloader isn't, or shouldn't I should say, locked again. The RAZR HD does the same thing if you directly flash a fastboot without removing the bad partitions and commands for unlocked phones flashing non-stock fastboots. The bad ones are the gpt partition and the oem fb* commands....there are a lot of guides that explain this and Mythtools (in AHD Developer forums) will do it all for you.
skeevydude said:
"fastboot oem fb_mode_clear" should get it to stop booting into fastboot mode
The problem is the gpt partition is security locked and one of the fastboot commands thrown is to lock the phone into fastboot mode for every boot until the flashes are done. The command above is the one used to revert the first one (fastboot oem fb_mode_set if you're curious). Your bootloader isn't, or shouldn't I should say, locked again. The RAZR HD does the same thing if you directly flash a fastboot without removing the bad partitions and commands for unlocked phones flashing non-stock fastboots. The bad ones are the gpt partition and the oem fb* commands....there are a lot of guides that explain this and Mythtools (in AHD Developer forums) will do it all for you.
Click to expand...
Click to collapse
fastboot oem fb_mode_clear doesnt work, i tried it before as well, mythtools also cannt help as device status is locked and if rsd cannt flash it i believe myth also cannt.and the reason i say its locked is because it does not respond to any oem command.
it probably got locked after the ota which failed
if i could find fxz for 98.5.38.MB886.ATT.en.US, it may be restored otherwise is there any way around to unlock bootloder from fastboot??
these are the only two options i can think of amoungst which later is has the least probability.......
capricorn85 said:
fastboot oem fb_mode_clear doesnt work, i tried it before as well, mythtools also cannt help as device status is locked and if rsd cannt flash it i believe myth also cannt.and the reason i say its locked is because it does not respond to any oem command.
it probably got locked after the ota which failed
if i could find fxz for 98.5.38.MB886.ATT.en.US, it may be restored otherwise is there any way around to unlock bootloder from fastboot??
these are the only two options i can think of amoungst which later is has the least probability.......
Click to expand...
Click to collapse
There isn't an fxz for that update yet. The one I would be able to make wouldn't include the correct gpt partition because I've flashed the Nextel fxz and none of the other gpt partitions from our stock fxz's will flash on my phone (there's a security lock on that partition). Though I know that between two or three of us here on xda, an fxz could be made with all the correct partitions from the update.
If you're positive that you were unlocked then just flash the Bell or Nextel 4.1.2 fxz's. They're not vulnerable to the heartbleed exploit which is the main reason that AT&T released the 98.5 update to begin with.
Have you tried "fastboot continue"? You might get lucky and the phone will at least boot up. And tried booting to recovery? Boot menu?
You can only unlock the bootloader from a rooted, running phone with ADB enabled. Can't do it in recovery or fastboot mode (unless you have a developer edition).
skeevydude said:
There isn't an fxz for that update yet. The one I would be able to make wouldn't include the correct gpt partition because I've flashed the Nextel fxz and none of the other gpt partitions from our stock fxz's will flash on my phone (there's a security lock on that partition). Though I know that between two or three of us here on xda, an fxz could be made with all the correct partitions from the update.
If you're positive that you were unlocked then just flash the Bell or Nextel 4.1.2 fxz's. They're not vulnerable to the heartbleed exploit which is the main reason that AT&T released the 98.5 update to begin with.
Have you tried "fastboot continue"? You might get lucky and the phone will at least boot up. And tried booting to recovery? Boot menu?
You can only unlock the bootloader from a rooted, running phone with ADB enabled. Can't do it in recovery or fastboot mode (unless you have a developer edition).
Click to expand...
Click to collapse
i tried bell's 4.1.2 earlier thinking the same as you said,but didnt work either, wont boot to recovery or boot menu.....
fastboot continue also takes to the old prompt...
capricorn85 said:
i tried bell's 4.1.2 earlier thinking the same as you said,but didnt work either, wont boot to recovery or boot menu.....
fastboot continue also takes to the old prompt...
Click to expand...
Click to collapse
IIRC, the Nextel (Mex Retail) is the highest version we have unless the new AT&T one supersedes it.
I've only seen this issue one other time over at the RAZR HD forums. With the latest KK OTA they had, his failed and the phone booted to a similar screen you have. Nothing has worked for that guy yet that I'm aware of (haven't checked in about a week now).
Have you tried manually flashing an fxz, not with RSD or Myth (though Myth does flash manually via a script but it skips the gpt partition, IIRC). I'd start with the ATT fxz and if it fails manually then I'd flash the Nextel one...after that I'm out of ideas.
skeevydude said:
IIRC, the Nextel (Mex Retail) is the highest version we have unless the new AT&T one supersedes it.
I've only seen this issue one other time over at the RAZR HD forums. With the latest KK OTA they had, his failed and the phone booted to a similar screen you have. Nothing has worked for that guy yet that I'm aware of (haven't checked in about a week now).
Have you tried manually flashing an fxz, not with RSD or Myth (though Myth does flash manually via a script but it skips the gpt partition, IIRC). I'd start with the ATT fxz and if it fails manually then I'd flash the Nextel one...after that I'm out of ideas.
Click to expand...
Click to collapse
Came here after trying all that
Tried manually flashing but the phone returns FAIL on EVERY command, same with myth tools it executes but nothing really happen in the phone, dont know what went so wrong with the OTA
i am just confused if i should let it be or keep trying until i find a solution
COuld battery charge level be the problem, when it all started it was more than 70 percent and i didnt keep it on for long. it says battery ok but dont know whats the exact battery level as fastboot oem battery-status or voltage level are also restricted
Well, it seems that skeevydude told you all I want to say
Solved: Using Nextel (Mex Retail)
Thanks all for your replies
The device is alive now after restoring to Mexican Retail using RSD (editing the xml file and deleting ONLY the two lines having getvar)
Myth Tools never worked, RSD DID!
BTW the mexican retail is much much better than the ATT version because:
It gets rid of the ATT bloatware
SPecially the att address book
Hotspot is working out of the box
its speedier
android version is upgraded (4.1.2 instead of 4.1.1)
provides an option of manually switching to 2g/3g
and much more
thanks skeevydude, nextel was the last option remaining anyway...........and it automatically fixed the gpr issue
capricorn85 said:
Thanks all for your replies
The device is alive now after restoring to Mexican Retail using RSD (editing the xml file and deleting ONLY the two lines having getvar)
Myth Tools never worked, RSD DID!
BTW the mexican retail is much much better than the ATT version because:
It gets rid of the ATT bloatware
SPecially the att address book
Hotspot is working out of the box
its speedier
android version is upgraded (4.1.2 instead of 4.1.1)
provides an option of manually switching to 2g/3g
and much more
thanks skeevydude, nextel was the last option remaining anyway...........and it automatically fixed the gpr issue
Click to expand...
Click to collapse
Isn't it already stated somewhere that if you are going to downgrade or change versions, you need to delete those lines anyways?
palmbeach05 said:
Isn't it already stated somewhere that if you are going to downgrade or change versions, you need to delete those lines anyways?
Click to expand...
Click to collapse
Yes it is, but thats only for upgrade, if downgrading the gpt line also need to be deleted, as i was not downgrading, only those two were required to be deleted which need to be specifically mentioned to avoid confusion
capricorn85 said:
Yes it is, but thats only for upgrade, if downgrading the gpt line also need to be deleted, as i was not downgrading, only those two were required to be deleted which need to be specifically mentioned to avoid confusion
Click to expand...
Click to collapse
I told ya Mex Retail would work....
skeevydude said:
I told ya Mex Retail would work....
Click to expand...
Click to collapse
It is worth a shot for me too!
I have RSDLite and attempted to flash. It gives me error about unknown <getvar>. Deleted those line(s) according to another post I found.
Then everything passes but I am stuck on the Fastboot Flash Mode?
God I will be happy when uncle same gets through with my son so he can help is ole man, lol.
---------- Post added at 06:14 PM ---------- Previous post was at 05:55 PM ----------
PROGRESS! I recalled skeevydude saying to stay alway from front USB ports and moved to back one and I now also have the Mex Retail version working. What a relief.
Now the bearing question is should I move on to another version like carbon or holoblur?
If ok to stay with this version, meaning will NOT get busted out by AT&T by using hotspot?
What do you recommend skeevydude?
Thank you so so so much.
Woody
Mexico Retail link
can someone provide me any link of Mexico Retail stock rom? Please.
ErickST18 said:
can someone provide me any link of Mexico Retail stock rom? Please.
Click to expand...
Click to collapse
http://sbf.droid-developers.org/phone.php?device=7
quasihellfish said:
http://sbf.droid-developers.org/phone.php?device=7
Click to expand...
Click to collapse
Thanks man
Pleas hlep me for alive my set thanks advance
dear i have a working phone MB886 with jellybean 4.1.1 unfortunately i flash the custom ROM of kitkat but set is dead i tired to alive the phone with myth tools rsd lite but no success my phone boot-loader locked i try to unlock the boot loader but nothing please anybody send ma working link of flash file Mexican or any other which are flash with rsd lite easily i am very thankful of that plzzzzzzzzzzz customer on my neck sorry for my bad English
shamshadhashmi said:
dear i have a working phone MB886 with jellybean 4.1.1 unfortunately i flash the custom ROM of kitkat but set is dead i tired to alive the phone with myth tools rsd lite but no success my phone boot-loader locked i try to unlock the boot loader but nothing please anybody send ma working link of flash file Mexican or any other which are flash with rsd lite easily i am very thankful of that plzzzzzzzzzzz customer on my neck sorry for my bad English
Click to expand...
Click to collapse
Please stop whining and being pathetic and actually search for moto sbf files. A new site popped up and comes up very easily. No need to make us die of laughter at someone begging for an sbf like a guy begging to get with a girl b/c he's thirsty. Smh lol
Sent from my ATRIX HD using XDA Free mobile app
need working link of file
i search everywhere but no file found i need file if anybody have so please share with me or upload thanks
quasihellfish said:
http://sbf.droid-developers.org/phone.php?device=7
Click to expand...
Click to collapse
Need 4.1.1..where can I find it? Tyvm
I'd like to return to stock directly to 4.4.2, and found this, but apparently the link for AHD is down. Anyone know if there's a mirror for it?
I currently have Blisspop installed. No ADB detection (adb turned on, phone says connected but PC doesn't see it), and fastboot isn't being detected. Anyone able to help?
Silly me, forgot to install Moto USB drivers on new Windows install.
Lmao bro, good to see you back buddy. So did you get it work?
TecknoFreak said:
Lmao bro, good to see you back buddy. So did you get it work?
Click to expand...
Click to collapse
I did after a bit of re-learning. Was on LGG2 for a while but it broke so I'm back on the HD. Turns out there is no official KitKat for the HD, that page is misleading and I've been spamming "System updates" on stock for half an hour.
Back on stock now (obviously) and can't manage to get CWM or PhilZ working, manually or through Myth. Just the stupid broken android. It's midnight here, so that's probably playing a factor in it. More tinkering tomorrow...
Try rooting with saferoot, then use mythtools or flashify for recovery.
Sent from my LG-D850 using XDA Free mobile app
bmatney said:
Try rooting with saferoot, then use mythtools or flashify for recovery.
Sent from my LG-D850 using XDA Free mobile app
Click to expand...
Click to collapse
What exactly is Saferoot? Never heard of it and Motochopper is the standard for this gen of Moto devices.
Some people have had issues if they are on the newest firmware with motochopper.
Sent from my LG-D850 using XDA Free mobile app
TecknoFreak said:
Lmao bro, good to see you back buddy. So did you get it work?
Click to expand...
Click to collapse
bmatney said:
Some people have had issues if they are on the newest firmware with motochopper.
Sent from my LG-D850 using XDA Free mobile app
Click to expand...
Click to collapse
Okay, well I done did it this time. Got up to stock ATT 4.1.1, then when I learned 4.4.2 isn't actually available yet, flashed Blisspop, which ran terribly, trying to go back to stock again with same fxz, trying to update to 4.1.1, the update gives me invalid GPT, stuck in fastboot, and apparently my bootloader got re-locked.
Any attempt to flash anything through fastboot returns a remote failure. Think I may be ****ed here.
penser said:
Okay, well I done did it this time. Got up to stock ATT 4.1.1, then when I learned 4.4.2 isn't actually available yet, flashed Blisspop, which ran terribly, trying to go back to stock again with same fxz, trying to update to 4.1.1, the update gives me invalid GPT, stuck in fastboot, and apparently my bootloader got re-locked.
Any attempt to flash anything through fastboot returns a remote failure. Think I may be ****ed here.
Click to expand...
Click to collapse
Your bootloader is not re-locked, just your gpt partition has been made invalid by gpt downgrade done by OTA (and because of that, the lock status can't be correctly determined by bootloader anymore).
All you have to do to fix it is to extract the gpt partition from the latest att OTA update and flash it via fastboot.
(I assume that you've been on the second aka latest 4.1.1 update from att [98.5.38], then downgraded to 4.0.4 by fxz while skipping gpt and tz flash, then took ota to the first 4.1.1 att update [98.4.20], resulting in downgraded gpt, because the actual gpt on your device before you took the ota was the newer one from the second 4.1.1 att ota [98.5.38].)
EDIT:
The latest att ota is attached to this post: http://forum.xda-developers.com/showpost.php?p=52657363&postcount=13
Extract gpt_main0.bin from the zip and flash it:
Code:
fastboot flash partition gpt_main0.bin
kabaldan said:
Your bootloader is not re-locked, just your gpt partition has been made invalid by gpt downgrade done by OTA (and because of that, the lock status can't be correctly determined by bootloader anymore).
All you have to do to fix it is to extract the gpt partition from the latest att OTA update and flash it via fastboot.
(I assume that you've been on the second aka latest 4.1.1 update from att [98.5.38], then downgraded to 4.0.4 by fxz while skipping gpt and tz flash, then took ota to the first 4.1.1 att update [98.4.20], resulting in downgraded gpt, because the actual gpt on your device before you took the ota was the newer one from the second 4.1.1 att ota [98.5.38].)
EDIT:
The latest att ota is attached to this post: http://forum.xda-developers.com/showpost.php?p=52657363&postcount=13
Extract gpt_main0.bin from the zip and flash it:
Code:
fastboot flash partition gpt_main0.bin
Click to expand...
Click to collapse
Thank you, you're a life saver! Re-learning everything about the AHD, got it for another 2 years.
Hi all. I'm an idiot. I updated to the 5.0 rom, and tried to downgrade to 4.4.3. It went well, until my device tried to update to 4.4.4. Now I'm stuck with a bootloader (xt1053 30.B7) that says it's locked, says it can't be unlocked, and says
Code:
downgraded security version
update gpt_main version failed
Failed to hab check for gpt_backup:0x35
CID read failure
Invalid CID status 0x69
CustomerID error. Contact dealer: 0xdead
no SP partition found
Please, is there any way to bring my device back to life? I've tried flashing pretty much anything I can get my hands on, but it always fails because the bootloader is locked. I tried unlocking it with the code I got from motorola a while back, but that's not working either. Again, please help if possible.
I'm a jackass. I'm trying the RSD with the newest SBF now.
Hopefully the 4.4.4 will fix you up.
thehanutedtubby said:
Hi all. I'm an idiot. I updated to the 5.0 rom, and tried to downgrade to 4.4.3. It went well, until my device tried to update to 4.4.4. Now I'm stuck with a bootloader (xt1053 30.B7) that says it's locked, says it can't be unlocked, and says
Code:
downgraded security version
update gpt_main version failed
Failed to hab check for gpt_backup:0x35
CID read failure
Invalid CID status 0x69
CustomerID error. Contact dealer: 0xdead
no SP partition found
Please, is there any way to bring my device back to life? I've tried flashing pretty much anything I can get my hands on, but it always fails because the bootloader is locked. I tried unlocking it with the code I got from motorola a while back, but that's not working either. Again, please help if possible.
Click to expand...
Click to collapse
I am not very familiar with how Moto's phone's do their stuff. But, have you tried flashing the stock image for your device? One thing though, if you used the leaked soak test to upgrade your device, your screwed until the official lollipop image for your device comes up.
thehanutedtubby said:
Hi all. I'm an idiot. I updated to the 5.0 rom, and tried to downgrade to 4.4.3. It went well, until my device tried to update to 4.4.4. Now I'm stuck with a bootloader (xt1053 30.B7) that says it's locked, says it can't be unlocked, and says
Code:
downgraded security version
update gpt_main version failed
Failed to hab check for gpt_backup:0x35
CID read failure
Invalid CID status 0x69
CustomerID error. Contact dealer: 0xdead
no SP partition found
Please, is there any way to bring my device back to life? I've tried flashing pretty much anything I can get my hands on, but it always fails because the bootloader is locked. I tried unlocking it with the code I got from motorola a while back, but that's not working either. Again, please help if possible.
Click to expand...
Click to collapse
IF you updated to one of the 5.02 leaks (or soaks as they were called), and got this message when trying to downgrade by flashing an OLDER Moto SBF (like 4.4.4), then you will likely be stuck until a 5.02 SBF leaks.
GPT.BIN doesn't like being downgraded, or attempted to be downgraded.
However, if your bootloader still says 30.B7, I would try flashing the stock Moto Xt1053 4.4.4 SBF using mfastboot by following option 5 at -> http://mark.cdmaforums.com/MotoX-ReturnToStock.html
So the bootloader does say it's 30.b7, but it also says it's locked. And when I try to unlock it, it says fastboot oem unlock disabled. I have tried flashing back to 4.4.4, but I think the updated gpt from 5.0.2 is messing it up.
As a few of us have tried to warn people, and just like the mad rush to flash kit Kat when it came out.... You will likely need to wait for the SBF of 5.0.2 for your device. Not much else you can do at this point.
Sorry for your unfortunate situation.
I managed to get it running again by flashing the gpt of the lollipop files. I'm doing my best to go to the 1053 lollipop build to avert another brick. Thanks all for the help!
And I'm successfully on the XT1053 lollipop build. Let it be known that I'm only on lollipop to avoid incompatibilities due to the new GPT I had to flash. Sorry Motorola. Trust me, I wish I had waited.
thehanutedtubby said:
And I'm successfully on the XT1053 lollipop build. Let it be known that I'm only on lollipop to avoid incompatibilities due to the new GPT I had to flash. Sorry Motorola. Trust me, I wish I had waited.
Click to expand...
Click to collapse
I did the same thing with my moto x and now I dont know what to do with it, can you help me?
Does yours say exactly what mine does? If so, flash the gpt.bin from the 5.0.2 zip's root directory, and reflash 4.4.4 completely. Then update using the zip from the other thread.
thehanutedtubby said:
Does yours say exactly what mine does? If so, flash the gpt.bin from the 5.0.2 zip's root directory, and reflash 4.4.4 completely. Then update using the zip from the other thread.
Click to expand...
Click to collapse
Can you explain what you did after flashing 4.4.4 with the gpt.bin from 5.0.2. I'm about to do that but am not sure what update in another thread you are referencing.
thanks.
thank you bro, i was really desperate! this must be stickie!
A sticky on how to possibly brick your device with one false move?
So, as the title says, I had a Moto X XT1058 from AT&T.
I updated a long time ago to Lollipop and the phone worked perfectly fine until yesterday, when suddenly shutted down and when I restarted, got stuck on M logo.
I restarted to bootloader(?) pressing power off and vol down buttons.
The version that shows me is 30.BE
The device wasn't unlocked or rooted, because I was happy with the stock ROM, so it says Device is LOCKED ans Status Code 0.
I tried every option on this menu and everyone says (in red):
"No valid PIV block in SP for system
piv validation failed (system)
Boot up failed"
I tryed with abd, fastboot, mfastboot and RSDLite to flash gpt.bin and motoboot.img and every time I do it I get a error, and the operation fails.
For what I've read in tooooooo many posts, it's probably death, but I resist to this idea, so I came here to ask for advice.
THE PHONE IS NOT IN WARRANTY ANY MORE.
Thanks in advance and sorry for my english (not my native language).
why dont you try twrp recovery ?
just flash it
fadyrox said:
why dont you try twrp recovery ?
just flash it
Click to expand...
Click to collapse
Can I do it if my phone isn't rooted? The bootloader it's locked!
Flash full stock att 5.1 rom, it will be fine.
Salik Iqbal said:
Flash full stock att 5.1 rom, it will be fine.
Click to expand...
Click to collapse
Flashing via fastboot mode will be okay !
do search here you will get details !
fadyrox said:
Flashing via fastboot mode will be okay !
do search here you will get details !
Click to expand...
Click to collapse
But I never flashed any ROM on this phone. I got Lollipop from a OTA update. My phone was stock. Never rooted, never unlock bootloader. I didn't find any tutorial to do it with this characteristics.
And it's an AT&T xt1058
MatiCepe said:
But I never flashed any ROM on this phone. I got Lollipop from a OTA update. My phone was stock. Never rooted, never unlock bootloader. I didn't find any tutorial to do it with this characteristics.
And it's an AT&T xt1058
Click to expand...
Click to collapse
first you need to unlock your bootloader .. otherwise you wont be able to recover your device
Please do a search regarding unlocking bootloader !
fadyrox said:
first you need to unlock your bootloader .. otherwise you wont be able to recover your device
Please do a search regarding unlocking bootloader !
Click to expand...
Click to collapse
The bootloader of the XT1058 from AT&T is'nt unlockable.... That's the big trouble. I've read that it can be done if it's no 4.2.2, but not if the version is newer.
MatiCepe said:
The bootloader of the XT1058 from AT&T is'nt unlockable.... That's the big trouble. I've read that it can be done if it's no 4.2.2, but not if the version is newer.
Click to expand...
Click to collapse
Download rsd lite for windows, get latest stock rom for att, reboot your phone into fastboot, flash stock rom and you are done.
Salik Iqbal said:
Download rsd lite for windows, get latest stock rom for att, reboot your phone into fastboot, flash stock rom and you are done.
Click to expand...
Click to collapse
I searched and the lastone is ATT_XT1058_5.1.0_LPA23.12-21.7_cid1_CFC.xml.zip. I try to flash it on my phone via RSD and the process showsme this error:
Failed flashing process. 4/18 flash motoboot "motoboot.img" -> Phone returned FAIL.
MatiCepe said:
I searched and the lastone is ATT_XT1058_5.1.0_LPA23.12-21.7_cid1_CFC.xml.zip. I try to flash it on my phone via RSD and the process showsme this error:
Failed flashing process. 4/18 flash motoboot "motoboot.img" -> Phone returned FAIL.
Click to expand...
Click to collapse
Is your phone is charge enough? Search 5.1.1 att xml zip
can anybody give a solution for this problem because i am also with a xt1058 at&t, The device wasn't unlocked or rooted and the version that shows me is 30.BE too
sorry my english
What's up with your device any screen shot?
Hi, i have the same problem, my device is locked by AT&T and i cant flash the firmware< i have a unlock code from the AT&T company, how I can introdce that code manually? Thanks!
Thank you
H3c4rtr1 said:
Hi, i have the same problem, my device is locked by AT&T and i cant flash the firmware< i have a unlock code from the AT&T company, how I can introdce that code manually? Thanks!
Click to expand...
Click to collapse
You can help how you got the code, give details.
Thank you