Related
Im trying to install the speedmod kernel for MIUI via ODIN and it keeps failing at get PIT for mapping?! Never had this problem when flashing a kernel before.
Im on JPY firmware using JPU for partition and PIT.
Someone help please :/
Have you made sure 're-partition' is UNchecked in odin ?
and you have not loaded a PIT file have you ??
could you post a screen shot of what odin looks like before you press start ?
Hello, im new to the world of galaxy note phones and need to flash N7000JPKJ4_OJPKJ3_XSG_Android_2.3.5 firmware through ODIN. I extracted the file and found just one tar file. Where do i select this file and do i need to select re-partition and pit file?
Thank you.
DO NOT, i repeat..DO NOT ever, check repartition or load a pit file.. this is the only known way to get a sure brick... you dont really ever need to flash a pit file unless you mess up your partition table.. if you look around the forum, the first rule of odin flashing is we do not play with pit files
unleashed12 said:
DO NOT, i repeat..DO NOT ever, check repartition or load a pit file.. this is the only known way to get a sure brick... you dont really ever need to flash a pit file unless you mess up your partition table.. if you look around the forum, the first rule of odin flashing is we do not play with pit files
Click to expand...
Click to collapse
So, i get it...i will not check re-partition and pit file..also should i select tar file in PDA?
andrew21 said:
So, i get it...i will not check re-partition and pit file..also should i select tar file in PDA?
Click to expand...
Click to collapse
yes.
10chars.
DO NOT CHECK RE-PARTITION
just select .tar file through PDA on Odin and let it do it's thing!
i have a problem cz i did PIT with u1_02_20110310_emmc_EXT4.pit
and now my phone is stuck but i still can enter download modem and odin read the phone.i have N7000JPKK2
Please help me!!
Hello! I am really tensed about my phone. its hard bricked.
I tried flashing the wrong firmwares and roms in it.
my phone is galaxy s2 i9100, thats what the back part says
I cant go to the recovery mode but only the download mode where I tried flashing some other roms but every time it says FAIL!
i am very tensed of what to do, my phone gets stuck every time of factory something when sometimes it hangs while flashing.
please help me anyone!!:crying::crying::crying::crying::crying::crying:
i download p1000 firmware but no have pit file only .
i can use any p1000 pit file with any p1000 firmware ?
if i try flash it 1st i need flash with pit file . 2nd need again flash with PDA, PHONE and CSC .
i need help & Answers about pit file .
i was on indian stock rom with kernel jv9so inorder to root i flashed cf root and it was working perfectly fi9
i went to recovery made a backup of my current rom (nandroid backup)
later from recovery i installed doc master aokp
and as i found it very laggy
i went to cwm and restored the backup
but now the phone is stuck in the splash screen i9000
so i tried flashing my stock rom back
but now its in a bootloop (the s screen bootloops)
after flashin the stock rom
in ma phone i c dis messgae in red
E: copy_dbdata_media:Can't mount DBDATA
How do i fix it
neerajganga said:
i was on indian stock rom with kernel jv9so inorder to root i flashed cf root and it was working perfectly fi9
i went to recovery made a backup of my current rom (nandroid backup)
later from recovery i installed doc master aokp
and as i found it very laggy
i went to cwm and restored the backup
but now the phone is stuck in the splash screen i9000
so i tried flashing my stock rom back
but now its in a bootloop (the s screen bootloops)
after flashin the stock rom
in ma phone i c dis messgae in red
E: copy_dbdata_media:Can't mount DBDATA
How do i fix it
Click to expand...
Click to collapse
Did you reflash your ROM with a pit file as well, because aokp uses a different file partition set up so pit is necessary when going back to stock
slaphead20 said:
Did you reflash your ROM with a pit file as well, because aokp uses a different file partition set up so pit is necessary when going back to stock
Click to expand...
Click to collapse
hmm
k
i din try flashing pit as i believe flashing pit is risky
can u gimme the pit file
and my stock rom package has only 1 file which i flash in pda
so if i am flashing pit
can u temme how do i go about
is it jus flashing pit (with repartition ticked or untick)
or
flashing pit with the pda file as i just have single file in stock rom package
neerajganga said:
hmm
k
i din try flashing pit as i believe flashing pit is risky
can u gimme the pit file
and my stock rom package has only 1 file which i flash in pda
so if i am flashing pit
can u temme how do i go about
is it jus flashing pit (with repartition ticked or untick)
or
flashing pit with the pda file as i just have single file in stock rom package
Click to expand...
Click to collapse
Whenever you flash with pit always tick repartition, if you open up the file you flashed you should be able to see if there is a pit in there, if not go to samfirmware.com and you will find pit files over there
slaphead20 said:
Whenever you flash with pit always tick repartition, if you open up the file you flashed you should be able to see if there is a pit in there, if not go to samfirmware.com and you will find pit files over there
Click to expand...
Click to collapse
i downloaded the stock from checkfus
and
i don think i have a pit in that
in the file it downloaded it has 1 tar file and a 1 file ss_dl.dll
and wen i open the tar file
it has
cache.rfs
modem.bin
boot.bin
factoryfs.rfs
param.lfs
sbl.bin
zImage
edit : also download the file from samfirmware it also has the same files
Grab a pit file then and flash it as well, and all should be good
slaphead20 said:
Grab a pit file then and flash it as well, and all should be good
Click to expand...
Click to collapse
alrite
but
do i have to flash the pit and the rom together
or flash pit first
and then after reboot i have to flash the rom
Flash them together
slaphead20 said:
Flash them together
Click to expand...
Click to collapse
will try 2mrw
and get back to u
neerajganga said:
will try 2mrw
and get back to u
Click to expand...
Click to collapse
Ok, good luck
neerajganga said:
i downloaded the stock from checkfus
and
i don think i have a pit in that
in the file it downloaded it has 1 tar file and a 1 file ss_dl.dll
and wen i open the tar file
it has
cache.rfs
modem.bin
boot.bin
factoryfs.rfs
param.lfs
sbl.bin
zImage
edit : also download the file from samfirmware it also has the same files
Click to expand...
Click to collapse
If you use pit and tick repartition using this ROM it will not work. For repartition you need dbdata inside the compressed ROM.
You can pick any ROM that have the dbdata and merge with your stock ROM to do a repartition and get your phone up and running again!!
Good luck
Sent from my GT-I9000 using xda app-developers app
leonardoafa said:
If you use pit and tick repartition using this ROM it will not work. For repartition you need dbdata inside the compressed ROM.
You can pick any ROM that have the dbdata and merge with your stock ROM to do a repartition and get your phone up and running again!!
Good luck
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
where do i get this dbdata from
its not there in stock rom or doc master rom which i had flashed earlier
Please close this thread
neerajganga said:
Please close this thread
Click to expand...
Click to collapse
Done
Good someone me a help, my 9305 Galaxy 16gb collapsed methyl an omni rom rom
]
was working fine the night I left it on the pc loading screen in the morning so had the samsung logo 9305 shall not give.
so enter into download mode with the jig
the pit file error
i need a rom 3 sections (phone/pda/csc)
my phone
<ID:0/032> Added!!
<ID:0/032> Odin v.3 engine (ID:32)..
<ID:0/032> File analysis..
<ID:0/032> SetupConnection..
<ID:0/032> Initialzation..
<ID:0/032> Set PIT file..
<ID:0/032> DO NOT TURN OFF TARGET!!
<ID:0/032> Get PIT for mapping..
<ID:0/032> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
already searched the form but the links are broken
x_biff said:
Good someone me a help, my 9305 Galaxy 16gb collapsed methyl an omni rom rom
]
was working fine the night I left it on the pc loading screen in the morning so had the samsung logo 9305 shall not give.
so enter into download mode with the jig
the pit file error
i need a rom 3 sections (phone/pda/csc)
my phone
<ID:0/032> Added!!
<ID:0/032> Odin v.3 engine (ID:32)..
<ID:0/032> File analysis..
<ID:0/032> SetupConnection..
<ID:0/032> Initialzation..
<ID:0/032> Set PIT file..
<ID:0/032> DO NOT TURN OFF TARGET!!
<ID:0/032> Get PIT for mapping..
<ID:0/032> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
already searched the form but the links are broken
Click to expand...
Click to collapse
if you want to flash official stock rom again you will not need 3 files. go to http://www.sammobile.com/firmwares/ search for i9305 in the firmware searchbar and download the firmware for your country/carrier and after that flash it with odin. select the tar. md5 file in AP button in odin and hit start. all the needed files are in 1 package!
in odin the boxes auto reboot and F. reset time should be checked and re-partition should be unchecked
odin
not work , pit file defect
x_biff said:
not work , pit file defect
Click to expand...
Click to collapse
This thread you may be interested:http://www.sammobile.com/forum/showthread.php?t=15719
viktorak said:
This thread you may be interested:http://www.sammobile.com/forum/showthread.php?t=15719
Click to expand...
Click to collapse
already tested with 4 cables nexus 4, original samsung, nokia and new highway wiko
Your partition table might be corrupted. You can try to flash with a pit file.
Search for i9305 pit file, DO NOT USE ANY OTHER VERSION pit file.
Hey dude using philz recovery fotmat every partitions.. u can find it in mount partition. . Than flash via odin
1Ishara said:
Hey dude using philz recovery fotmat every partitions.. u can find it in mount partition. . Than flash via odin
Click to expand...
Click to collapse
enter into download mode with the jig
x_biff said:
not work , pit file defect
Click to expand...
Click to collapse
seems like you have messed up the pit partition, my guess is you did this while flashing with odin you had re-partition box checked, which should be unchecked. here is the pit file you need http://forum.xda-developers.com/gal...fo-i9305-pit-file-flash-analysis-pit-t1950591
MaHo_66 said:
seems like you have messed up the pit partition, my guess is you did this while flashing with odin you had re-partition box checked, which should be unchecked. here is the pit file you need http://forum.xda-developers.com/gal...fo-i9305-pit-file-flash-analysis-pit-t1950591
Click to expand...
Click to collapse
pit file only not work , need the unpacked rom (csc modem. tar)