My Samsung Galaxy ace S5830 was running fine on a custom rom (cm11).
But then i flashed a new rom(WP) from the thread - http://forum.xda-developers.com/showthread.php?t=2140510 .
I am sure i followed the instructions mentioned in that thread.
After completion of flashing the zip file my phone turned off and dint boot up.
I tried to get into recovery mode ,but the phone dint even turn on.
I removed the battery ,charged it fully and tried getting into download mode (using 3 buttons),just with a hope to get back to stock rom using ODIN. But the Phone wont even tun on,i mean the screen wont even get on :crying: (No samsung logo ,No recovery mode,No download mode- nothing).
Now what should i do. ??? and will a usb jig help me out ??
rgr117 said:
My Samsung Galaxy ace S5830 was running fine on a custom rom (cm11).
But then i flashed a new rom(WP) from the thread - http://forum.xda-developers.com/showthread.php?t=2140510 .
I am sure i followed the instructions mentioned in that thread.
After completion of flashing the zip file my phone turned off and dint boot up.
I tried to get into recovery mode ,but the phone dint even turn on.
I removed the battery ,charged it fully and tried getting into download mode (using 3 buttons),just with a hope to get back to stock rom using ODIN. But the Phone wont even tun on,i mean the screen wont even get on :crying: (No samsung logo ,No recovery mode,No download mode- nothing).
Now what should i do. ??? and will a usb jig help me out ??
Click to expand...
Click to collapse
You're basically in the same position as me. Try this it nearly helped me: Take out phone battery, start odin with phone plugged in (battery still out) and load the files you need, hold the 3 button combo for recovery and insert battery whilst still holding the buttons (may need a second pair of hands to help), the phone should now be recognised by odin so hit start. For me it stuck at "setup connection" but you may be luckier. Also i had to hold volume up + down, home and power to get mine to recognise, you may need to do the same. If that don't work you're only option is to try the jig. There's no guarantee though. Good luck and let us know what happens cos i've gotta get a jig but i dont even have a spare couple of quid at the mo
rgr117 said:
My Samsung Galaxy ace S5830 was running fine on a custom rom (cm11).
But then i flashed a new rom(WP) from the thread - http://forum.xda-developers.com/showthread.php?t=2140510 .
I am sure i followed the instructions mentioned in that thread.
After completion of flashing the zip file my phone turned off and dint boot up.
I tried to get into recovery mode ,but the phone dint even turn on.
I removed the battery ,charged it fully and tried getting into download mode (using 3 buttons),just with a hope to get back to stock rom using ODIN. But the Phone wont even tun on,i mean the screen wont even get on :crying: (No samsung logo ,No recovery mode,No download mode- nothing).
Now what should i do. ??? and will a usb jig help me out ??
Click to expand...
Click to collapse
AFAIK CM7.x require CWM5.x... so maybe CWM 6.x is incompatible ...mmm i didn't test it but it could be :weird:
same here!! Stuck at "setup connection"
Way333 said:
You're basically in the same position as me. Try this it nearly helped me: Take out phone battery, start odin with phone plugged in (battery still out) and load the files you need, hold the 3 button combo for recovery and insert battery whilst still holding the buttons (may need a second pair of hands to help), the phone should now be recognised by odin so hit start. For me it stuck at "setup connection" but you may be luckier. Also i had to hold volume up + down, home and power to get mine to recognise, you may need to do the same. If that don't work you're only option is to try the jig. There's no guarantee though. Good luck and let us know what happens cos i've gotta get a jig but i dont even have a spare couple of quid at the mo
Click to expand...
Click to collapse
So, sorry for the late reply. My phone was not even getting detected by Odin in my friends laptop.
I gave up all the hopes,but then i just wanted to give it another try.
Tried the same trick,and this time,Odin detected my ace .
Now, the things is,the flashing process isn't going any further
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5830iXXMC1_S5830iODDLK1_RST_S5830iDDMC1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
Been 10 minutes already ..Nothing happened ..
rgr117 said:
My Samsung Galaxy ace S5830 was running fine on a custom rom (cm11).
But then i flashed a new rom(WP) from the thread - http://forum.xda-developers.com/showthread.php?t=2140510 .
I am sure i followed the instructions mentioned in that thread.
After completion of flashing the zip file my phone turned off and dint boot up.
I tried to get into recovery mode ,but the phone dint even turn on.
I removed the battery ,charged it fully and tried getting into download mode (using 3 buttons),just with a hope to get back to stock rom using ODIN. But the Phone wont even tun on,i mean the screen wont even get on :crying: (No samsung logo ,No recovery mode,No download mode- nothing).
Now what should i do. ??? and will a usb jig help me out ??
Click to expand...
Click to collapse
Hi There,
Well your device has bricked n that too Hard Bricked i,e No Recovery No Download.
A Usb JiGG may help you out.
Related
Hi I just decided to change my custom firmware to darkynote from rocketrom. It worked perfectly but I wanted to update my kernal also so afterwards i rebooted into recovery and installed version 2.6 of Abyss Note. Now My phone boots to the "Samsung Galaxy Note N7000" Screen and stays there unless i plug it in, then when i start it it goes to a frozen battery screen. I cant boot into recovery but i can boot into download mode. Can someone help me get my phone back to stock? I can't seem to find a tutorial anywhere that will work for me.
please help
edit: extra details, the Odin3 v1.85 process gets stopped at NAND Write Start!!
Here is the message feed:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXKL7_N7000OXAKL7_N7000XXKL7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> factoryfs.img
<ID:0/006> NAND Write Start!!
Also tried using CF-Root kernal. no luck there. The Bar in Odin says KERNEL and the green bar is full, also stuck at NAND Write Start!!.
Someone respond, im gonna cry.
First Relax man, dont be in hurry, read this guide twice/thrice n calmly proceed...
It is nice still you can entre to download mode.
First get Stock firmware from here Type N700 in search field, it will show all available firmware, select you wish to flash n download
Note : If you select latest ROM KL7, you won't get Root + CWM, for that you have to Flash another ROM first, then You have to Root + CWM,then Install Mobile odin pro, now flash KL7 with Mobile Odin pro with 'ever root' option enable. If you selecting another ROM, ignore this note
Get odin n extract
Install:
Install Kies on your computer, connect your phone and make sure that all the drivers installed correctly.
Extract tar file from the ROM you have download(password available at site from you have download). Put the phone into download mode (vol. down+home+power buttons),
Comlete close kies, if open. start odin, connect the phone via USB. Choose continue on the phone,
make sure that only two boxes are checked in odin - Auto Reboot and F.Reset Time.
Choose PDA button in Odin and select tar file you extracted before.
Choose START button.
The phone will reboot after the flash. Done.
Alright sounds good but i left it at the NAND write start thing overnight and when i came back it said this:
<ID:0/006> NAND Write Start!!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
Now I have a black screen and its flashing on and off with the frozen battery symbol. I think the battery is drained or something.
Also my download of the rom finished, there isnt any tar files its just a zip with an MD5 file and a Dll. Should i just but the MD5 file in the PDA section?
Edit: now my phone wont do anything when i try to put it in download mode.
Anyway if you are still able to entre Download mode, then try to flash stock kernel as i said above.
But thats what I mean, is it possible for the phone to not boot into download because the battery is dead or is my phone just bricked forever $850 dollars out the window.
tangelos said:
I cant boot into recovery but i can boot into download mode.
Click to expand...
Click to collapse
Actually i dont understand properly, your first post said U R getting into DW mode, if you can entre into boot mode, i guide you earlier, i cant say it bricked.
many time this happen after some error in procedure.
If you even not able to entre into Download mode, you need to entre it with JIG.
dr.ketan said:
Actually i dont understand properly, your first post said U R getting into DW mode, if you can entre into boot mode, i guide you earlier, i cant say it bricked.
many time this happen after some error in procedure.
If you even not able to entre into Download mode, you need to entre it with JIG.
Click to expand...
Click to collapse
Actually I was just updating you. At first it was working, then i tried a tutorial simmilar then the one you just gave me and it caused the phone to not turn on whatsoever. Can you link me to one of these "jigs". Thanks
You can get it readymade from market e.g. ebay or you can make it own home made
see here http://forum.xda-developers.com/showthread.php?t=819551
better first try with other battery once, if you cud manage
I was able to get a hold of one locally. When I plug it in, nothing happens. Any advice? Its for a GSII. Is that why? Or is it the battery thing. Before it stopped working completely, when i booted into download it would say low battery. Looks like its game over for my new phone .
I tried this with an old usb cable http://forum.xda-developers.com/showthread.php?p=20914895#post20914895.
Inserted the USB Jig afterwards. No luck
I suppose i have to take it to be J-tagged: http://toronto.kijiji.ca/c-buy-and-...-JTag-Service-Phone-Unlock-W0QQAdIdZ341742939
I'm sorry if this is not helping, or being so late, but I wanted to share my experience.
So, now can you enter the recovery menu by pressing the 3 buttons?
if you can then do a factory reset/wipe from the recovery and then flash an entire flashable ROM, maybe a stockROM or ROCKETROM.
you can upload ROCKETrom from the ordinary windows explorer , just copy and paste to the ex.SD.
the looping android animation actually happened to mine, and that's how I fixed it.
BTW: I didn't use Odin at all, or any other program.
Thanks for trying to help but this is completely irellavent. My phony CAN'T get into recovery and it NO LONGER CAN even get into Odin (download mode). I guess I wasn't clear when posting. Is anyone aware of a hardbrick fix or if sammy will repair ,my phone for a price.
Hi buddy. The EXACT same happened to be when trying to flash RocketV16. Frozen charge screen and everything.
To sort it I first let the phone start and hang on the black/white writing splash screen, removed the battery while it was on, held down the power button without the battery in for 3-5 seconds, put the battery back in. I then held Vol Down, the Home button and then the power down button (hold down power last) for some seconds until the Odin-Mode downloader came up.
After that I just followed a guide on flashing with Odin.
No more £9999999999 brick
unfortunatly i cant try that stratagy because i cant even get to the splash screen anymore. + i gave it to a local guy who claims to be able to jtag it. If it doesnt work ill send it to samsung and of course pay because i voided my warrenty. oh well. better then my old i9000m.
Galaxy Note N7000 Screen
I hate to hijack your thread but what I have to ask directly relates to your issue.
I have been searching for any file that contains this actual GALAXY Note Boot Screen - I am looking for this image file with the hope of making this my sole wallpaper/background. If there is anyway you or those who are reading this can PLEASE attach the file or at the very least provide a link so I 'd be able to download it for myself. I'd sincerely appreciate any help I can get.
I'm willing to pay ANY PERSON WHO PROVIDES A HIGH QUALITY IMAGE HOPEFULLY ALREADY SIZED FOR IMMEDIATE USE.
I'm sorry - please don't take this message as that of "shouting", My hope was to capture readers attention. Again, I apologize in advance for anyone having taken this message as shouting. That was not my intent.
Jim
connection
hey,i don't get how u manage to transfer stock firmware into the phone when pc cannot detect any file from the note???is it using odin??if yes,may someone share how to connect the phone to the pc via odin??
---------- Post added at 07:37 PM ---------- Previous post was at 07:27 PM ----------
hey how you manage to upload rocket rom,my pc cannot detect any file from my phone..even simple window explorer does not turn up..i hope u may help me...
me too Stuck at Galaxy Note Boot Logo
dr.ketan said:
First Relax man, dont be in hurry, read this guide twice/thrice n calmly proceed...
It is nice still you can entre to download mode.
First get Stock firmware from here Type N700 in search field, it will show all available firmware, select you wish to flash n download
Note : If you select latest ROM KL7, you won't get Root + CWM, for that you have to Flash another ROM first, then You have to Root + CWM,then Install Mobile odin pro, now flash KL7 with Mobile Odin pro with 'ever root' option enable. If you selecting another ROM, ignore this note
Get odin n extract
Install:
Install Kies on your computer, connect your phone and make sure that all the drivers installed correctly.
Extract tar file from the ROM you have download(password available at site from you have download). Put the phone into download mode (vol. down+home+power buttons),
Comlete close kies, if open. start odin, connect the phone via USB. Choose continue on the phone,
make sure that only two boxes are checked in odin - Auto Reboot and F.Reset Time.
Choose PDA button in Odin and select tar file you extracted before.
Choose START button.
The phone will reboot after the flash. Done.
Click to expand...
Click to collapse
Dr Ketan,I have mentioned the same in your other thread about stucking at Galaxy Note Boot Logo forver.
I was on CheckRom v6 and then i went to flash a kernel and then got stuck at Galaxy Note Boot Logo.
I am not able to got to recovery mode by pressing power+home and vol+,but I can go to Download mode by pressing power+home and vol-.so i went to desktop Odin and tried flashing one of the rom(Dr Ketan Guide to Rooting).Seems like Odin was succesful but still stuck at Galaxy Note Boot Logo.
please need help here,I hope my Galaxy Note is not Bricked!
Try flashing a cf root kernel back
Sent from my GT-N7000 using XDA
Remkve battery for few min, thn put it back n try to enter recovery
If you able to enter recovery wipe cache n wipe data, thn reflash rom with pc odin.
Sent from my GT-N7000 using xda premium
I tried to install stock rom after CM9 was installed in my device.
odin got stuck in the middle and after that when I tried to open the device I was stuck in the "galaxy note N-7000" screen, and it wouldnt go into recovery, only to download mode.
when I tried to use odin again it got stuck in:
<ID:0/011> NAND Write Start!!
so I read this thread:
http://forum.xda-developers.com/showthread.php?t=1607011&highlight=nand+write+start
so I tried to flash the PIT file and odin got stuck again.
after that I pulled the battery out and now the power button wont do anything!
not even the smallest light on the screen.
I also tried to use combination with volume and home screen button. still nothing!
what do I do???
(I also tried to use another fully charged battery! still nothing!)
ykurtser said:
I tried to install stock rom after CM9 was installed in my device.
odin got stuck in the middle and after that when I tried to open the device I was stuck in the "galaxy note N-7000" screen, and it wouldnt go into recovery, only to download mode.
when I tried to use odin again it got stuck in:
<ID:0/011> NAND Write Start!!
so I read this thread:
http://forum.xda-developers.com/showthread.php?t=1607011&highlight=nand+write+start
so I tried to flash the PIT file and odin got stuck again.
after that I pulled the battery out and now the power button wont do anything!
not even the smallest light on the screen.
I also tried to use combination with volume and home screen button. still nothing!
what do I do???
(I also tried to use another fully charged battery! still nothing!)
Click to expand...
Click to collapse
I am afraid that nearest samsung service centre is the next step my friend.
so you're saying after you pulled the battery and got it back in it doesn't goto download mode ? if you have a JIG try using it to force DownloadMode in case it does work and the pit doesn't work try re partition option with odin the partition (hopefully) just got messed and not the MOBO....
abhisahara said:
I am afraid that nearest samsung service centre is the next step my friend.
Click to expand...
Click to collapse
Not just the next step, but the only step...I second what Abhi said.
Hello, guys.
I was trying to install a new rom to my Galaxy Note. and when wiping out the user data (to get the phone ready to install the new rom) he phone reboot and got stuck on the start up logo. Waited for a long time but it didn't do any thing. So a remove the baterry and turned it back on. But but it did the same.
I then decided to flash it using Odin but it got stuck almost at the end of the proccess. Now my battery is almost dead and the only thing on the screen is a flashing message. Firmware upgrade encounter an issue.
HELP!!! THIS IS MY NEW PHONE!!!!
estebandilone said:
Hello, guys.
I was trying to install a new rom to my Galaxy Note. and when wiping out the user data (to get the phone ready to install the new rom) he phone reboot and got stuck on the start up logo. Waited for a long time but it didn't do any thing. So a remove the baterry and turned it back on. But but it did the same.
I then decided to flash it using Odin but it got stuck almost at the end of the proccess. Now my battery is almost dead and the only thing on the screen is a flashing message. Firmware upgrade encounter an issue.
HELP!!! THIS IS MY NEW PHONE!!!!
Click to expand...
Click to collapse
Which rom you were on before trying to flash? And what did you try to install?
Sent from my GT-N7000 using xda premium
I was on Android 4.0.3 the German realesed.
N7000XXLPY---------4.0.3---------2012 May
I downloaded it from the forum and it was working nicely. I just wanted to try a different rom. But I didn't get to do nothing just to clear the data which never ended and crash my phone..
Stuck after wiping user data, Odin hanging at the end..where exactly did it stop working?
I'd say that it's definitely superbricked.
you can do that:
- go on recovery (Try vol up + home + power)
- mount usb storage and put abyss kernel in a directory
- flash abysskernell4.00
- reboot recovery
- wipe data cache and dalvik
- power off
- power on
if it's stay on boot logo :
- power off
- vol down + home + power (download mode)
- flash your note with odin pc with this method
- dl mobil odin and flash ics open germany with this method
Noizy.
I will try that, but now i have to charged my battery to be able to do it.
When trying to flash the green bar on Odin gets almost to the end ot the proccess but then it just sits there and doesn't do anything...
estebandilone said:
I will try that, but now i have to charged my battery to be able to do it.
When trying to flash the green bar on Odin gets almost to the end ot the proccess but then it just sits there and doesn't do anything...
Click to expand...
Click to collapse
Could you paste the Odin log perhaps? That would help the people around here give you a solution, if any.
Right now I am downloading the files from the commment above... I will try that and post whatever it happened!!! My internet conection is just a Mega so it takes me a while to download all the files to try it... But I am almost done!!
This is what I have on Odin. It almost get to the end of the green bar.
<ID:0/012> Added!!
<ID:0/012> Odin v.3 engine (ID:12)..
<ID:0/012> File analysis..
<ID:0/012> SetupConnection..
<ID:0/012> Initialzation..
<ID:0/012> Get PIT for mapping..
<ID:0/012> Firmware update start..
<ID:0/012> factoryfs.img
<ID:0/012> NAND Write Start!!
This is the message Showing..
Is your LPY Rom rooted? If yes, then how?
Did you flash CF-Root LPY kernel, or did you root it using Dr.Ketan's method?
This is a screen shot of the screen.
Yes it's rooted and I used Dr.Ketan's method..
I'm afraid you have a brick on your hands, mate. Take your Note to the
nearest service centre for MoBo replacement.
That I can't do. I bought from a third person... So I don't have any warranty... Let me ask you a question. The fact that I can get into recovery mode doesn't make a difference?
estebandilone said:
This is a screen shot of the screen.
Click to expand...
Click to collapse
Duno if this method will work for u but it works for me n my friend...
1stly i pressume u are able to boot into download mode...
2ndly, d/l a rooted GB Rom...
3rdly, restart pc/lappy
4thly, change another USB port (changed port works for me n my friend)
5thly, fire up PC Odin... put Note into download mode n connect...
Lastly select the rooted GB rom under "PDA"..
keep finger cross
Noted From My G.NOTE Using XDA Premium
I am trying again.
Not working... Don't know what to do
It's superbricked, for sure. All you can do is send it for repairs - motherboard replacement.
[Solve on [email protected]] Similar Case for reference
estebandilone said:
Not working... Don't know what to do
Click to expand...
Click to collapse
Hey dude, I had a similar case when I was upgrading my S2 officially because my USB was loose, I got the update 60% and came to a halt, my phone wasn't even rooted by then.
Here's what I did and here's what you can try:
1. root my phone (for your case, re-root your phone or even unroot then re-root it again, there may be some files damaged when your phone lost power).
2. install original kernel and Stock ROM (there might be original files which are needed from the original to make things work when you switch ROMs)
3. reboot and see if things are fine.
If you get back to running normal, then you can install whatever Custom ROMs you like.
Hope this help! Get back to me with the latest situation.
Hello gentlement. I have an Galaxy S I9000, and i have used a custom rom for about 2-3 months, unfortunately i can't remember which one, and as i cant boot my phone, im not sure how i can find out. I flashed it using Odin and Clockwork mod, both of which worked great. The problem now started out with me not being able to start my phone while charging, didn't pay much attention to it and just waited until it was charged, or unplugged it, started it, then charged it while it was on.
Now im having a different problem. I cant start my phone, the startscreen just says "Samsung galaxy S" etc, and it tries to reboot again and again.
I can start the phone into "download mode", but recovery mode doesnt seem to work.
Since the rom has been working flawlessly in the past, im not sure its the roms "fault"; might just be my phone singing on it's last verse.
Does anybody know what can cause this, or have a fix i can do in download mode?
I think i have read all the necesarry stickies, if i've missed something i apologize.
Thanks for all responses, regards - superegge
When this happens on ICS I reflash a kernel through odin in download mode and then reflash the ROM.
If your ROM is non wipe you could try this, otherwise I'd just try flashing a kernel and see if it boots.
superegge said:
Does anybody know what can cause this, or have a fix i can do in download mode?
Click to expand...
Click to collapse
First power down, remove battery, remove sim card and EXT SD card, preess power button for a min, reinsert battery and power it....
If still the same, flash a pit file as per guide given in Quick Fixes link below
xsenman said:
First power down, remove battery, remove sim card and EXT SD card, preess power button for a min, reinsert battery and power it....
If still the same, flash a pit file as per guide given in Quick Fixes link below
Click to expand...
Click to collapse
Thank you both for responses. I've tried following your guide many times now, installed odin etc. But everytime i try to flash my phone, this happens:
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> Removed!
Sometimes it gets to some zImage thing, but my device is still "removed" shortly after. Is it maybe a faulty cable?
Will check back in tomorrow, need to sleep now. Again, thanks for your help
superegge said:
Sometimes it gets to some zImage thing, but my device is still "removed" shortly after. Is it maybe a faulty cable?
Will check back in tomorrow, need to sleep now. Again, thanks for your help
Click to expand...
Click to collapse
yep, it could be due to cable or mostly the PC, try on lap top or another PC, added concerning this to Quick fixes, take a rest first,
ive had the same problem with Odin. But that had to do with rooting, and the oneclick superuser program.
Hopefully it will work when you try on a new pc. Good luck superegge!
Hello everyone!
I`m new here.And I meet a very troublesome(just for me) problem.I hope there`ll be someone could solve it.thanks first.
(Because English is not my mother language,my some words maybe are difficult to understand.but I`ll gald if someone could correct my grammer error)
At first,I introduce my phone.It`s Galaxy S advance(that means I went into the right place to ask question).
My phone`baseband is XXLD1(Android version 2.3.6) when I get it about two years ago.Then I upgraded it to XXLQB(Android version 4.1.2).
But a few days later,I realize that European version ROM could flash Asia version offical ROM.So I flash Samsung-GT-I9070-XTE-I9070DXAMD1-1365494217(Because it has Chinese language).
when it want to flash CHN-I9070ZCLPC-20130812164209 into my device.Here problems come.
I got this idea at (sorry i can`t put a link without permission) . I get my phone into downing mode.flash CHN-I9070ZCLPC-20130812164209(just a PDA , no pit csc and so on).I failed to flash in. The error infomation that odin give me is <ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9070ZCLPC_I9070CHNLPC_I9070ZCLPC_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> cache.img.md5
<ID:0/003> NAND Write Start!!
<ID:0/003> hidden.img.md5
<ID:0/003> kernel.bin.md5
<ID:0/003> kernel2.bin.md5
<ID:0/003> mem_init.bin.md5
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
so i decided to downgrade from 4.1.2 to 2.3.6(official DXLD1) .Successed smoothly.now i`m 2.3.6 official rom with baseband named DXLD1.
than i flash CHN-I9070ZCLPC-20130812164209(PDA) with 16G pit . this time i Successed.but when i odin say RESET.it was in RESET a long time. so i close odin.pull out the USB.
NOW i can`t light my phone with many ways.Such as HOME+VOL.DOWN+POWER and 301K.i also can`t get into recovery mode. when i Plug it in the power . it has no reaction. what should i do to save my Galaxy S Advance ?
1. Where are you from?
2. What 4.1.2 version did you download? Please post a link here!
3. Try: Press Volume down, Home button, Power button ... Any reaction? Did you get into Download mode?
If you didn't get into Download mode then you have a problem, your device is Hard-Bricked ... That means the only thing which can safe it is to give it to the shop where you bought it, hopefully you have still warranty ... Simply tell them your device didn't start anymore and perhaps you get a new one ... - I read already it is 2 years old ... so that is a big problem ...
If you didn't buy your phone in China or in completely Asia it was a big mistake to flash a Chinese version!!!
Flo0008 said:
1. Where are you from?
2. What 4.1.2 version did you download? Please post a link here!
3. Try: Press Volume down, Home button, Power button ... Any reaction? Did you get into Download mode?
If you didn't get into Download mode then you have a problem, your device is Hard-Bricked ... That means the only thing which can safe it is to give it to the shop where you bought it, hopefully you have still warranty ... Simply tell them your device didn't start anymore and perhaps you get a new one ... - I read already it is 2 years old ... so that is a big problem ...
If you didn't buy your phone in China or in completely Asia it was a big mistake to flash a Chinese version!!!
Click to expand...
Click to collapse
1.I`m from China.
2.Because I have no permission,I can`t post a link.
3.when I press that 3 buttons,I get nothing. No any reaction......I can`t get into Download mode..
I`ll post the link that I downloaded from when I get the premission.
So,I get a Hard-bricked now ? Are there some ways I can try to save my phone?
Flo0008 said:
1. Where are you from?
2. What 4.1.2 version did you download? Please post a link here!
3. Try: Press Volume down, Home button, Power button ... Any reaction? Did you get into Download mode?
If you didn't get into Download mode then you have a problem, your device is Hard-Bricked ... That means the only thing which can safe it is to give it to the shop where you bought it, hopefully you have still warranty ... Simply tell them your device didn't start anymore and perhaps you get a new one ... - I read already it is 2 years old ... so that is a big problem ...
If you didn't buy your phone in China or in completely Asia it was a big mistake to flash a Chinese version!!!
Click to expand...
Click to collapse
http://pan.baidu.com/s/1o6nxPgA This the Chinese version that I downloaded.
AceVincent said:
http://pan.baidu.com/s/1o6nxPgA This the Chinese version that I downloaded.
Click to expand...
Click to collapse
Flo0008 said:
1. Where are you from?
2. What 4.1.2 version did you download? Please post a link here!
3. Try: Press Volume down, Home button, Power button ... Any reaction? Did you get into Download mode?
If you didn't get into Download mode then you have a problem, your device is Hard-Bricked ... That means the only thing which can safe it is to give it to the shop where you bought it, hopefully you have still warranty ... Simply tell them your device didn't start anymore and perhaps you get a new one ... - I read already it is 2 years old ... so that is a big problem ...
If you didn't buy your phone in China or in completely Asia it was a big mistake to flash a Chinese version!!!
Click to expand...
Click to collapse
I bought it on a on-line shop in China.It seems that it`s not a chinese version.Its baseband is XXLD1
If your phone doesnt show any reaction, try to put out your battery for 20 minutes, put it in your phone back, connect it to the charger, wait 1 hour and try to get into Download Mode again ... I think the worst case happened for you, a Hard Brick. This happened because of disconnecting your phone during installing Stock rom with Odin ... Keep me up to date
Flo0008 said:
If your phone doesnt show any reaction, try to put out your battery for 20 minutes, put it in your phone back, connect it to the charger, wait 1 hour and try to get into Download Mode again ... I think the worst case happened for you, a Hard Brick. This happened because of disconnecting your phone during installing Stock rom with Odin ... Keep me up to date
Click to expand...
Click to collapse
I did it,but no any reaction. what should i do?
AceVincent said:
I did it,but no any reaction. what should i do?
Click to expand...
Click to collapse
Go to the shop where you buyed it and tell them you were just listening music or something on your phone and suddenly he shut down and you could never turn him back on.
working on it...
Hi,
I'm working on an unbrick procedure (http://forum.xda-developers.com/showthread.php?t=2701363) without JTAG or any box.
Results look promising but I have very few time to work on it.
But I think I'm close to it...
I have gained a good understanding of the boot and flashing procedure using the flashkit tool (on which the Snowball open source riff tool is based on).
We have all the pieces (including certificates). We "just" have to assemble the correct bootloader including the recovery software and boot it from USB using flashkit.
-> If someone with good linux/Android compiling knownledge helps me it might be fast.
If not, just wait that I manage to do it... or give up and go to a shop with a Riffbox, Z3x, Octopus or whatever it is called to recover the phone" the hard way"
flentus said:
Hi,
I'm working on an unbrick procedure (http://forum.xda-developers.com/showthread.php?t=2701363) without JTAG or any box.
Results look promising but I have very few time to work on it.
But I think I'm close to it...
I have gained a good understanding of the boot and flashing procedure using the flashkit tool (on which the Snowball open source riff tool is based on).
We have all the pieces (including certificates). We "just" have to assemble the correct bootloader including the recovery software and boot it from USB using flashkit.
-> If someone with good linux/Android compiling knownledge helps me it might be fast.
If not, just wait that I manage to do it... or give up and go to a shop with a Riffbox, Z3x, Octopus or whatever it is called to recover the phone" the hard way"
Click to expand...
Click to collapse
YEAH!You`re very helpful.but i can`t help you. sorry, looking forward your amzing result.
@AceVincent
There is a chance to unbrick your phone with a tool called USB JIG:
http://www.amazon.de/s?ie=UTF8&x=0&...n-yt-21&linkCode=ur2&camp=1638&creative=19454
It may help, but perhaps not ... if you bought it you can safe your hard bricked phone in this way:
Instruction:
1. Put out the battery
2. Wait for 2 minutes
3. Plug in the USB JIG
4. Now put the battery back into your phone
Now your phone should boot into the Download Mode, like mentioned above, it should ...
If it worked for you it solves other things too: It makes the yellow triangle to disappear and it sets the Binary counter back to zero ...
I never tested it until now because I didn't break my phone so far, but this will be the one of the last opportunities to revive your phone ... But I can't guarantee anything ...
Flo0008 said:
@AceVincent
There is a chance to unbrick your phone with a tool called USB JIG:
http://www.amazon.de/s?ie=UTF8&x=0&...n-yt-21&linkCode=ur2&camp=1638&creative=19454
It may help, but perhaps not ... if you bought it you can safe your hard bricked phone in this way:
Instruction:
1. Put out the battery
2. Wait for 2 minutes
3. Plug in the USB JIG
4. Now put the battery back into your phone
Now your phone should boot into the Download Mode, like mentioned above, it should ...
If it worked for you it solves other things too: It makes the yellow triangle to disappear and it sets the Binary counter back to zero ...
I never tested it until now because I didn't break my phone so far, but this will be the one of the last opportunities to revive your phone ... But I can't guarantee anything ...
Click to expand...
Click to collapse
If there is a bootloader for I9070.I wanna it to test my way to save my phone @Flo0008 @shut_down