I was cleaning out an apartment and found an HTC HD7 windows phone. everything on the outside looks fine to me, but as soon as i put the battery in it it boots up, thus making it impossible to get to the boot loader. When i try and shut it down it just keeps turning itself back on. Once it moves past the HTC splash screen it tells me to connect it to a computer. i tried that, downloaded the htc sync app and still nothing.. I want to get it up and running because, who can complain about a free phone. There is no sign of water damage. Any ideas?
Related
I've just purchased a diamond and am having a lot of different issues. The phone boots and starts ok but it reguarly locks up. Windows crashes reguarly and the touch screen stops working. You can control the phone from the bottom buttons but without turning it off and on again the screen wont work. The windows errors are to do with device.exe and gres.exe
Phone also wont connect to the network even though it is unlocked, have flashed it with 1.3 olli to see if that would fix it but i hasn't.
Phone randomly turns off and re-starts.
Does anyone have these kind of issues as the phone is unusable?
Send it back for a replacement, seems like the phone is faulty and i wouldnt try fixing it.
So I had some water damage to my tilt. At first it would only boot to the tri-color screen after I dried it. Now it fully boots but when winmo opens it says that the sim door is unlocked and it will turn off in 10 seconds. htc home is running in the background, and sometimes, for a few seconds it connects to activesync, then the phone turns off. I also noticed that it connects to winamp when the phone is off and just plugged into the usb.
I'd like to think that reloading the ROM would fix this. Is there a different way to load ROMS? Does anyone have any ideas on how to fix this? I would appreciate any advice. I wouldnt mind waiting for the FUZE but need a phone till then.
I'm stuck at the "Tap the screen to set up your Windows Mobile-based device." The screen on my HTC 8125 has been acting flakey... working sometimes, but mostly not. A friend thought he would help out, and thought hard reseting the device might help. Now I'm stuck at the tap this screen message, only the touch screen isn't working and is not accepting the tapping. Am I completely outta luck without a phone now?? At least before I could make and answer phone calls. Now, NOTHING. Just this screen. IF there is any way around this that anyone knows of, PLEASE let me know!!
Thank you
I think you have a hardware problem
Maybe the flex
maybe the microcontroler
maybe the rom Try a new again instead the one you have
for skip this screen alignment try to search on the forum there are many ways
I simply conect it to activesync even if it is stucked at this screen it syncs with your pc via activesync... then go to explore...Windows folder.... startup... and delete the file called welcome.lnk then softreset.
Yeah my wizard is stuck to @ tab the screen etc.
I can't connect to activesync becuase activesync does not detect the phone.
Nevermind!
tnt929 said:
I'm stuck at the "Tap the screen to set up your Windows Mobile-based device." The screen on my HTC 8125 has been acting flakey... working sometimes, but mostly not. A friend thought he would help out, and thought hard reseting the device might help. Now I'm stuck at the tap this screen message, only the touch screen isn't working and is not accepting the tapping. Am I completely outta luck without a phone now?? At least before I could make and answer phone calls. Now, NOTHING. Just this screen. IF there is any way around this that anyone knows of, PLEASE let me know!!
Thank you
Click to expand...
Click to collapse
Try to replace a new battery, i have the same problem be4. And i discovered the battery is bulked. So I go to buy a new one, and problem is gone now.
still stuck
I have the same problem, i tried looking through explorer but i couldnt find the file to delete so that i could bypass this startup. If anyone figured anything out let me know please.
[email protected]
thanks!
1. Do a soft reset. (small hole on the right side)
2. When screen is black hold camera button, this will boot into bootloader
3. Connect USB cable (USB will show over left softkey)
4. Try to flash a new ROM.
I did this process a few times with different roms.. the best I had was using the HardSPL process, and then the NBD_v8.3_8MB rom.
Hi Guys,
I bought an HD7 from UK with a broken screen. Just installed the screen, and tried to switch on the phone for the first time. It was stuck on the HTC logo. So I pulled the battery out, and tried to reboot, but now it vibrates 7 times and does nothing more.
BTW. I made it to boot into bootloader, and it shows the attached screen.
I tried to flash a stock NoDo rom with GoldCard, but it fails at the first step, saying:
"Radio.nbh - FAILED"
I've used the GoldCard on two other HD7s in the past, so I guess the problem lies elsewhere. Now I try to download an other original O2 UK rom, and see it it makes any differen or not.
Any clue about what could cause this? And how to resolve the problem?
Any clue about this problem?
A bit of update about this. Put the phone in a bag and put it into the freezer for an hour. After I switched the phone on, and it WORKED! Loaded up the OS, checked my emails and so on, but after around 5 mins (when it warmed up) it shut itself down, rebooted and vibrated 7 times again...
So it's a heat issue.
Also noticed that if I leave the phone for a while It loads up into bootloader, does what I want, but the more I use the worse it gets. First it freezes, then won't even switch on.
Is it a CPU failiure?
VTS_Tibi said:
A bit of update about this. Put the phone in a bag and put it into the freezer for an hour. After I switched the phone on, and it WORKED! Loaded up the OS, checked my emails and so on, but after around 5 mins (when it warmed up) it shut itself down, rebooted and vibrated 7 times again...
So it's a heat issue.
Also noticed that if I leave the phone for a while It loads up into bootloader, does what I want, but the more I use the worse it gets. First it freezes, then won't even switch on.
Is it a CPU failiure?
Click to expand...
Click to collapse
Maybe it is a bad assembly, why don't you reassemble the phone, all points to that... this happened after the disassembly, right?
Hi Everyone,
I was hoping someone would be able to help me with this as I've been at it for hours and I still can't do anything.
Basically at this point I think my phone is stuck in a reboot, what happens is when I open the phone the LG logo pops up, after that the T-Mobile 4G LTE screen with the white background shows up and the phone basically either gets stuck on that screen until the charging is finished or reboots every hour or so. I don't understand whats going on I've never touched the phones files and I've never rooted etc. I've also tried to hard reset but its the same problem. I found a ROM for this phone (original from TMobile) and I was planning on trying to install that and hopefully getting it to work but for that I need to be able to get into download mode, whenever I hold the volume up button and plug the cable in it goes straight to charging and my laptop says USB Charge only Interface (tried all 4 ports), I've also installed the LG United Mobile Driver but to no avail. Since my laptop is not recognizing that my phone is plugged in other than a simple sound and the laptop charging the phone I don't know how else I can get the phone to work because I cant access developer options either for the phone because of the reboot / stuck problem.
Does ANYONE have a fix for the problem? I don't want to go out and buy another phone because I really like this phone. I hope there's a fix. Thank you.
Ive come back to this issue and I still haven't found a solution, I'd be forever grateful if anyone has!