Related
Now, I use Winmo and Android.... and i have two sd cards, one for every OS... Because it is so easy to lose the new microsd cards... I cut the rubber that protects the battery and I put there the second sd card. For me it is sufficiently fixed, and I can carry ever my two sd cards with me.... (I dont use any case, only film protectors....)
I'm sure I'm not the first, but I think someone has not thought about it..
Regards....
Edit: probably, can fit a sd card plus a sim card....
lol
what a cool idea xD
im not using two sd cards, but probably soon xDD
I do that, a lovely tweak
I experimented with including an SD adapter as well, but no room
Guys...you don't need to cut anything for the microSD to fit.
Just put the second card on top of your SIM card. The clearance is sufficient without putting undue pressure on the battery/case/card.
That's what I did when I backpacked through Europe my HD2 + spare memory card for storing extra photos/videos.
Will the heat generated from the battery ruins the SDcard?
It's kinda funny seeing this. I've been doing this since I started running android on my hd2. But I didn't cut the foam and haven't had a single issue... didn't even try down by the simple but I don't want things sliding round inside the battery cover..
Sent from my Mytouch HD2
And I thought I was the only one..
Good to see other genius individuals in here as well.. Although, I did recently donate an 8 gig card because the card bumped out and got caught on the side seam.. Just keep an eye out.
this is how i roll, no sliding around either
fastwanabe said:
this is how i roll, no sliding around either
Click to expand...
Click to collapse
this one is awsome xD
Thats how ive been carrying my two extra cards. Glad to know theres others like me out there.
Havent had any issues yet.
fastwanabe said:
this is how i roll, no sliding around either
Click to expand...
Click to collapse
Been doing this for months, no problems with the cards when I've had to use them, 4 cards 3 android builds and a winmo build - easy
fastwanabe said:
this is how i roll, no sliding around either
Click to expand...
Click to collapse
Double sided tape leaves glue on the cards? Or use Blu-tack?
no glue or tape required, just place card and slowly put cover on hd2
Excellent idea, thought of it just couple of hours ago but thought maybe it wouldn't fit. Gonna store my 2GB card there w/ copilot on it, for whenever I can't use Google Nav.
thanks for the trick. its a good idea to carry extra stuff in the back. im now looking for the cushion in the middle to put in my mugen extended battery back. there is no support inside so everything will slide around and get damaged. just for a temporary fix, i might stuff it with some bounty lol. picts when i find the cushion strip.
sdcardolder.com Has the coolest MicroSDHC card holders for around $7USD. the size of a credit card, it can hold 10 MicroSD cards and a SD to micro adapter. Multiple colors and even a hole for a keycain/lanyard. Now that Dalingrin has the video working so slick on CM7 this could be a helpful item for juggling cards for video.
deadbot1 said:
sdcardolder.com Has the coolest MicroSDHC card holders for around $7USD. the size of a credit card, it can hold 10 MicroSD cards and a SD to micro adapter. Multiple colors and even a hole for a keycain/lanyard. Now that Dalingrin has the video working so slick on CM7 this could be a helpful item for juggling cards for video.
Click to expand...
Click to collapse
This is a very interesting design. Right now i have 3-4 micros in their own cases with adapters in my back pack. The design worry's me, how well does it hold the cards id be afraid they would fall out.
I'm with the previous poster. Looks like it would be too easy to have a card slip right out on accident. Otherwise, I'm always looking for a better way to hold my cards than the 4 different boxes I already use.
the site mentions that center tab on each slot...think it is supposed to act as the retention mechanism.
ya i saw that, but im still a bit weary. if you buy it let me know. if it holds them well, and does not feel like it will get loose with age i might be game to buy it.
Yeah..gonna buy a few cards and one of these soon...got the call to go back to work Monday...yay money!
Sent from my NookColor using XDA Premium App
I bought one of these a few weeks ago to keep track of my growing supply of uSD cards. I can attest that it's very handy and size-efficient.
I can understand the concerns that the cards may fall out, but the center-tab latching mechanism seems pretty secure, as it is reinforced on the underside. I actually bought 2 other models (one to hold multiple SIMs and one to hold multiple full-sized SDs). They all work as expected and I'm pleased with the purchases.
Other than this model, I haven't seen anything which holds a large # of uSD cards in a small space.
Cheers
If you're not juggling *quite* that many SDs, this adapter/holder handles uSD, M2 and sim: http://www.amazon.com/gp/product/B002Z7N0TY
Someone posted a review at the bottom of this post: http://forum.xda-developers.com/showpost.php?p=13709994&postcount=99
bonmot1893 said:
as it is reinforced on the underside.
Click to expand...
Click to collapse
any chance you can post a pic?
When I said that it was reinforced underneath, I misspoke. They do seem to be more than adequately rigid, given that they don't need to travel far to release the cards.
As requested, here are some pictures of the retention mechanism.
I just bought one of these at amazon, with the intention of sticking some velcro on it and attaching it to my B&N Industriell Easel.
Ophbalance said:
I just bought one of these at amazon, with the intention of sticking some velcro on it and attaching it to my B&N Industriell Easel.
Click to expand...
Click to collapse
Looking forward to more feedback. It looks like either of the 2 posts would help as far as storage is concerned but I am also having trouble keeping my cards straight. I have the NC and 2 android phones.
Taosaur said:
If you're not juggling *quite* that many SDs, this adapter/holder handles uSD, M2 and sim: http://www.amazon.com/gp/product/B002Z7N0TY
Click to expand...
Click to collapse
I ended up picking up this reader/holder, and I expect it will remain sufficient for my needs for some time to come. In addition to the 2 uSD, 1 SIM and 1 M2 storage slots (all cards I currently use, though only one of each and usually in their respective devices), 1 more of any of the above can be stored in the reader slot.
I hadn't considered it when I ordered, but the reader is slim enough to slip in the cover flap of my NC case, which I had thought impractical for anything but a wiping cloth or a few sheets of paper. In a lot of cases, it would fit neatly in the ID pocket (fits mine, too, but makes the cover bulge there when closed).
About the only con I see is that they probably could have made it smaller still--I suspect the center 1/4-1/3 of the width is wasted space inserted for that credit card form factor.
deadbot1 said:
sdcardolder.com Has the coolest MicroSDHC card holders for around $7USD. the size of a credit card, it can hold 10 MicroSD cards and a SD to micro adapter. Multiple colors and even a hole for a keycain/lanyard. Now that Dalingrin has the video working so slick on CM7 this could be a helpful item for juggling cards for video.
Click to expand...
Click to collapse
bonmot1893 said:
I bought one of these a few weeks ago to keep track of my growing supply of uSD cards. I can attest that it's very handy and size-efficient.
Click to expand...
Click to collapse
Did you order directly from the company or via their store at Amazon?
I think I will order the SIM card holder. They have a buy 3 get 4 promo via Amazon. It would be overkill to buy the SIM Card Holder, SD card holder and the micro SD cardholder. What would I do with a fourth card holder?
SIM Card Holder
Holds up to 3 cell phone SIM cards, 4 micro SD cards, and one standard "Micro SD to SD card adapter
Click to expand...
Click to collapse
Explore3 said:
Looking forward to more feedback. It looks like either of the 2 posts would help as far as storage is concerned but I am also having trouble keeping my cards straight. I have the NC and 2 android phones.
Click to expand...
Click to collapse
It works fine for me... I'm thinking of how to best slap it on my case, at present. I think I'm going to sew some magnets into a fabric pockect, and just use the magnetic stick in the case to tether it in place. As to keeping track, maybe a bit of paint on the cards? Be it nail polish, poster, marker, etc? Keep them color coded and easily sorted .
bonmot1893 said:
When I said that it was reinforced underneath, I misspoke. They do seem to be more than adequately rigid, given that they don't need to travel far to release the cards.
As requested, here are some pictures of the retention mechanism.
Click to expand...
Click to collapse
Thanks for the photos. I think ill order one of these. looks like it works well. and your review seals the deal.
Thanks OP who mentioned sdcardolder.com. I ended up doing the buy 3 get 4 deal at Amazon.
2 SIM Card Holder
1 SD card holder
1 Micro SD cardholder
PS Thinking about putting them into an Altoids tin when traveling.
Explore3 said:
Thanks OP who mentioned sdcardolder.com. I ended up doing the buy 3 get 4 deal at Amazon.
2 SIM Card Holder
1 SD card holder
1 Micro SD cardholder
PS Thinking about putting them into an Altoids tin when traveling.
Click to expand...
Click to collapse
You are welcome. Glad to see I helped someone.
Sent from my NookColor using XDA Premium App
Hi all, the best part of this holder is it is designed to fit right in the pelican (!) ( secure digital case which makes it not only secure, but also waterproof, and if I do say so, very cool. I bought mine from amazon.
Hi All
My friend has used a sim adapter within the sim tray (he had a nano sim from having used in an iPhone 5). He cannot now remove the sim tray, comes out a couple of mm and gets stuck.
The phone has been sent to HTC UK for repair and they are quoting him £200 (!) to fix. He's asked them to return without fixing.
Any ideas on how a DIY repair may be carried out? I'm wondering if removing the top and bottom speaker grills, afters applying some heat, will allow access to screws to allow the screen etc. to be removed?
Any advice appreciated!
saquib said:
Hi All
My friend has used a sim adapter within the sim tray (he had a nano sim from having used in an iPhone 5). He cannot now remove the sim tray, comes out a couple of mm and gets stuck.
The phone has been sent to HTC UK for repair and they are quoting him £200 (!) to fix. He's asked them to return without fixing.
Any ideas on how a DIY repair may be carried out? I'm wondering if removing the top and bottom speaker grills, afters applying some heat, will allow access to screws to allow the screen etc. to be removed?
Any advice appreciated!
Click to expand...
Click to collapse
get some pliers and yank the thing out clean
IINexusII said:
get some pliers and yank the thing out clean
Click to expand...
Click to collapse
He did use quite a lot of force to try to pull the tray out, but it seems to be catching something on the inside. I think if we try what you suggest we'll send up with with 2 pieces, with one stuck inside.
saquib said:
He did use quite a lot of force to try to pull the tray out, but it seems to be catching something on the inside. I think if we try what you suggest we'll send up with with 2 pieces, with one stuck inside.
Click to expand...
Click to collapse
if you remove the screen etc i doubt youll ever get it back on. its probably just the adapter which is misplaced and preventing the tray to come out, try wiggling the phone about and trying to pull and push at the same time. be prepared to order another adapter and maybe another sim card too
Seems like the nano SIM has fallen out of the adapter?
Get some fuse wire, one pack will have varying gauges of wire, make a loop with the wire, shove it in the slot, shuggle it about.
Good luck!
Take it to a local phone repair shop and see what they'd charge.
Sent from my HTC One using Tapatalk 2
I suggest not forcing it off. Look at the ifixit disassembly force pulling it might lead the plastic injected mold to break and you wouldn't want that to happen.
Damn! Sim has fallen out the adapter for sure. And if that's the case then your friend is probably screwed. Since the sim probably came off the adapter, the adapter might now be stuck on the pins that read the sim card.
Same thing happened to my friends sgs2 which I'm about to fix soon. The only way I was able to remove the sim was by prying it out. That resulted in one of the pins to break off and now it doesn't read the sim.
See the picture below for reference. You can see the 3 gold pins on the left side of the sim tray exposed. There are also 3 more under that metal piece to the right, which is the actual tray. You can see there's 4 holes where you can see 2 gold pins showing through and one is missing. There supposed to be 6 pins total. 3 on the left and 3 on the right. That's the one pin that got stuck on the sim adapter. I'm afraid this is probably the same problem you have.
I suggest your friend sents it back to htc and let them take it out. They will have to open up the device to do so.
Sent from my HTC myTouch 4g using xda premium
This happened to me with the One. Use a super thin razor blade (the kind that you use on the old school razors), stick it in through the side, and pry toward the side that it's supposed to be installed. Do the top and bottom little by little. Eventually it will come out enough to grab with a pair of small needle nose pliers.
killabee44 said:
This happened to me with the One. Use a super thin razor blade (the kind that you use on the old school razors), stick it in through the side, and pry toward the side that it's supposed to be installed. Do the top and bottom little by little. Eventually it will come out enough to grab with a pair of small needle nose pliers.
Click to expand...
Click to collapse
This is on the right track. I have used plastic lamination that I cut, paper, cardboard, a piece of tape folded over so it's not sticky. Something that will bend and allow you to slide in between the sim card and the pins or whatever is holding it. You can then wiggle the tray out and then shake the nano card out. I have done this before it can take hours of playing with it. Finding the right object that you can slide in there is key. Also look for any pictures you can find of a teardown to give you an idea of what is holding it and where you need to slide something in to free it. The key is patience do not force anything or something will break. It will be long and tedious this I promise.
Does that make sense?
Try an auto feeler gauge set from Halfords for a selection of shim thicknesses, then trial and error.
Thanks for all your suggestions.
Currently waiting for HTC to return the phone (for a £25 charge due to not proceeding with a repair). Once back will try to put into action what has been suggested.
Thanks again,
Yeah i had a similar experience with sim adaptors. Don't use them. (as you found out they just get stuck). I would take a really thin blade or something and push up on the sim tray (you said that it comes out a bit) .Thats how i freed my sim on another phone.
PS: DONT remove the speaker grills. This phone is pretty much impossible to put back together once you take it apart.
Just want to chime in and said that I bought the noosy nano sim adapter off of Amazon and my sim tray got stuck as well. The tray was only stuck when there was no nano sim in the adapter. When I placed the microsim adapter with the nano sim it worked perfectly, for me at least. I wanted to keep the micro sim adapter in the tray because I was afraid of losing it.
fffssslll said:
Just want to chime in and said that I bought the noosy nano sim adapter off of Amazon and my sim tray got stuck as well. The tray was only stuck when there was no nano sim in the adapter. When I placed the microsim adapter with the nano sim it worked perfectly, for me at least. I wanted to keep the micro sim adapter in the tray because I was afraid of losing it.
Click to expand...
Click to collapse
Could you post how you got the tray out with the adapter in? I have the same adapter and can't seem to get it. THANKS!!!!
I ejected the sim tray as far as I can then slid some very thin lamination into both sides of the tray then prayed and pulled. Did this with and without the nano sim in the adaptor and realized that it was the micro adaptor without the nano sim. Busy of luck buddy.
zampolit said:
Could you post how you got the tray out with the adapter in? I have the same adapter and can't seem to get it. THANKS!!!!
Click to expand...
Click to collapse
I actually finally got it just as I was about to give up! I used a blade from a straight razor. The pins that contact the nano sim are what got stuck. For future reference you have to push it in fairly hard on the side of the tray towards the back of the phone. and if like me you are using something narrower than the tray, it has to be closest to the top of the phone.
The pins that are sticking are on the back top of the adapter. It seems the pins are straight so they snag when they are in the opening of the sim adapter.
Haha congrats.I was a little frantic first but finally got it as well. As long as you don't scratch it up any thin item probably works.
So getting a micro SIM from your carrier(free) and not damaging your $600 phone trying to use a nano SIM would be the best solution.
Sent from my HTC One using xda app-developers app
Need suggestions
My SIM tray is jammed. I got this ugly thing over 2 weeks back and feel like hell. I tried removing my SIM card check for data service in my other SIM but it didn't came out. I tried quite hard till my fingers started paining. I tried with a paper clip. My SIM is working fine without any issues but next month I will be travelling to India and hence will be required to change my SIM. I read about this a lot and seems like there is no repair for HTC ONE. Can you guys please guide me over this ... :crying::crying::crying:
Hey,i've bought a new wallet cover and this might seem dumb,but i really confuses me.
It's nice,it's an official one,it appears in the "accesories" tab,but the pocket doesnt seem to have an intrance. It has that line,but no entrance. And i can feel that there is a pocket for the card,but i really don-'t know how to reach it.
I did not read the papers...,who does that for a CASE?
Do i need to do something for it to open or it's just one of a kind who has no entrance?
saaron272 said:
maybe you should take a photo of it so can be more clearly to help you , usually there is a line use for put the card slot,
Click to expand...
Click to collapse
Problem solved,i had to cut it with a knife on the line. Close this thread
I have a broken USB port and looking to open this up and replace, but haven't seen anything posted. I found this, so if this will work...the heating up bit I haven't' done before to remove a back cover, but if lieu of a repair not sure how useful the tablet is
Anyone replace this part before?
Thanks!
NitDawg
It looks like it's modular - probably pretty simple to fit.
But remember - the Tab is plastic welded shut and you need to heat it up to separate the halves.
Depending on whether Murphy's Law visit you a lot (as it does me), you might be better of sending it in for repairs.
nitdawg said:
I have a broken USB port and looking to open this up and replace, but haven't seen anything posted. I found this, so if this will work...the heating up bit I haven't' done before to remove a back cover, but if lieu of a repair not sure how useful the tablet is
Anyone replace this part before?
Thanks!
NitDawg
Click to expand...
Click to collapse
I've read about many different ways of heating to open the tablet. A simple solution that worked well for me, was using a plain old steam iron, a single edge razor blade of the type used in box openers and an exacto knife. Be careful not to cut the LCD ribbon cable on the bottom edge of the tablet. It starts about 3" in from the Samson logo side of the tablet.
Thanks all! Yeah, I've opened up a few others before, but not one with heat. Using a place close by in the Raleigh area, they were willing to do it for $70 including the part...so well-worth it to me.
Thanks again!
Worth the price is they do it right, seal it up again, guarantee the work...
So after 2 different repair shops and half a year later, I was able to get this replaced. The first place held it for a month waiting for the part and eventually said it was not going to come in (strange). I let it sit for a while and then hit up another repair store...they said they can get the part. Was read the riot act on the risk, etc...but it was worthless at this point, so why not. They were able to do and all appears fine.
However, I wanted to transfer some files in prep for maybe a newer ROM when I noticed the replacement port does not allow any data transfer. I have another T810, so I know its not the various cables I tried. So that part is a bummer, but at least it charges...not sure why data transfer does not work, but I'm taking it!