Database Develop

is that ok if i didnt make hard-spl first :\

i forget it , very stupid.
but i use touch-it rom for two days it's not hang or anything.

n13oss said:
i forget it , very stupid.
but i use touch-it rom for two days it's not hang or anything.
Click to expand...
Click to collapse
That's weird
The hard-SPL let you flash custom roms on your device.
Maybe the hard-SPL is included in the Touch-it, not sure about that
As long you don't have problems, there's no reason to worry about

i didn't used it either, and didn't start with the touch rom, but another one.
And don't have any problems yet, can flash every rom
greatz
Patrick

there is no need to make a hard spl every time you flash a rom. The first hard spl you do will stay "forever" and allows you to flash as many custom roms as you want.
Dont forget to read the forums. There are a lot of helpful FAQs and threads around. Just do a search.

Woo Hoo !
i will buy pizza for all you guys !

last flash i forgot the hard spl, too. But instead of flashing the new rom my phone stays at the old one...
very strange ^^ reflash with hardspl helps

Kid_DC said:
last flash i forgot the hard spl, too. But instead of flashing the new rom my phone stays at the old one...
very strange ^^ reflash with hardspl helps
Click to expand...
Click to collapse
Yeah like someone said before
The Hard SPL stays
only if you have some problems you can reflash it with hard SPL again and with a custom roms, but if you don't have any probs, you don't have to do it anymore ;-)
I'm not sure if this is correct (correct me if i'm wrong), but if you flash your phone with an official rom/firmware, the hard-spl-thing will be gone.
So after flashing with an official rom/fw, you'll need to flash the hard-spl again if you want a custom rom on it.

hm... i think you have missunderstand me... ^^
I wasn't able to flash the new Custom Rom. I tried to do so and the phone was in bootloader mode and then there comes the thing that says "23%" ... "24%" and so on...
But after the Soft Reset ("...100%") there wasnt the new rom on my phone but the old one...
So that didnt work for me...
I think you have to flash the hard spl every time before you can flash a custom rom

Kid_DC said:
I think you have to flash the hard spl every time before you can flash a custom rom
Click to expand...
Click to collapse
No, you don`t need too, HardSPL stays forever.

And why wasn't I able to flash a new rom without hardspl first?

Kid_DC said:
And why wasn't I able to flash a new rom without hardspl first?
Click to expand...
Click to collapse
Because, before you flash custom rom for the first time, you need to HardSPL first, but only one time.

Remove, duplicate post

hm... This was my 30. flash of a custom rom, I think.

Can`t say, .nbh file was damaged in some way, but if u flash same file after HardSPL, hmm.. wierd Never happend to me.

Help, after ROM upgrade Phone is not working

I have a no brand HTC Touch HD (italian)
I installed hardSPL 1.56 and then a cooked ROM
After restart I wasn't able to get my phone working
If I try to force through the connection setting, my HD simply "freeze".
I tried a second cooked ROM and got the same problem.
Any idea?
Could I install the previous stock ROM without erasing hardSPL?
Thanks

You need to install stock SPL to flash stock ROM. Do that and try again

Thanks... the problem was that I had the wrong HardSPL!

Hereticus said:
Thanks... the problem was that I had the wrong HardSPL!
Click to expand...
Click to collapse
no prob dud. good that you sorted it out.

hspl problems

Hi im having problems upgrading my hardSPL, I have hard reset and then tried to update but it just fails due to an error at 0%? I have tried everything that i hae found too.
Please help as i would like to start flashing new roms!
DIAM100
spl1.37.****

patch1985 said:
Hi im having problems upgrading my hardSPL, I have hard reset and then tried to update but it just fails due to an error at 0%? I have tried everything that i hae found too.
Please help as i would like to start flashing new roms!
DIAM100
spl1.37.****
Click to expand...
Click to collapse
its been ageeeeeeeeeeees since i flashed hspl, do you not have to flash a special radio b4 u can flash spl? lol

Help!My Blackstone fails to accept a WM6.5 rom, as it used to the past!

Hi guys, I've been using the Energy roms quite often and I can say I did not fail to upgrade any of the updates. Today, my Blackstone "freezed" while I was surfing on the internet using opera, I took off the battery and I turned it on again but no success, so I decided to upgrade the rom (I was using the 25th Dec Rom). I followed the same procedure as always and when the installation ended the phone failed to boot. It reached at the stage where you are asked to enter the pin code, I typed it and then "nothing"! It kept frozen no matter what I was trying to do. I did several hard resets, I re-installed the latest rom (both versions) but nothing
Anyone knows how to fix this issue????
I need to say that in trying to fix this issue, I installed an old rom which was based on Windows 6.1 and the phone worked just fine, but the whole rom was so old, so I could not stay with that one. This means that the phone is not broken, right?
I also followed someone's here suggestion to go back to the original stock rom, hard reset and then install again the WM 6.5 roms. But again, this did not change anything. Is there a way to make the phone "accept" the WM 6.5 roms, as it used to accept them before???
Please help me cause I cannot live without this phone!!!
Thanks in advance for all those experts who are willing to share their suggestions with me!

gerakas23 said:
Hi guys, I've been using the Energy roms quite often and I can say I did not fail to upgrade any of the updates. Today, my Blackstone "freezed" while I was surfing on the internet using opera, I took off the battery and I turned it on again but no success, so I decided to upgrade the rom (I was using the 25th Dec Rom). I followed the same procedure as always and when the installation ended the phone failed to boot. It reached at the stage where you are asked to enter the pin code, I typed it and then "nothing"! It kept frozen no matter what I was trying to do. I did several hard resets, I re-installed the latest rom (both versions) but nothing
Anyone knows how to fix this issue????
I need to say that in trying to fix this issue, I installed an old rom which was based on Windows 6.1 and the phone worked just fine, but the whole rom was so old, so I could not stay with that one. This means that the phone is not broken, right?
I also followed someone's here suggestion to go back to the original stock rom, hard reset and then install again the WM 6.5 roms. But again, this did not change anything. Is there a way to make the phone "accept" the WM 6.5 roms, as it used to accept them before???
Please help me cause I cannot live without this phone!!!
Thanks in advance for all those experts who are willing to share their suggestions with me!
Click to expand...
Click to collapse
Have you tried various wm6.5 roms, possibly as bad download? Obviously I'm assuming you have either HSPL on device or you re-used USPL before flashing rom?
Did you flash back to original stock rom & SPL? i.e. rom and SPL which was on device when you bought it?

I had the same problem on the same rom, flashed stock rom then back to energy's. Been working fine ever since
Did you do a hard reset after installing energy rom too?

Fallen Spartan said:
Have you tried various wm6.5 roms, possibly as bad download? Obviously I'm assuming you have either HSPL on device or you re-used USPL before flashing rom?
Did you flash back to original stock rom & SPL? i.e. rom and SPL which was on device when you bought it?
Click to expand...
Click to collapse
Thank you very much for your response! I followed your suggestion to go back to the stock rom and spl and then flash cooked rom, although Energy roms still refused to install after all this procedure! I don't know why, because they have been working and installed just fine in the past. I suceed on flashing a Miris rom, not the latest one but an old one I had in my computer and fortunately it worked! So, according to the results of my experiment, my phone accepts WM6.5 roms, but not Energy roms! I will be waiting for an update of Energy roms to see if the new version will be accepted by my phone!!!
Thanks again for the assistance!

xmsnx said:
I had the same problem on the same rom, flashed stock rom then back to energy's. Been working fine ever since
Did you do a hard reset after installing energy rom too?
Click to expand...
Click to collapse
Thanks for the response, read what I wrote in my response to the other friend!

I got similar issues before, the phone just couldn't boot or hard reset itself after one or two days with many different 6.5 ROMs. Did an mtty task 29 then it looks good now for a week. If it still failed I would follow Fallen Spartan's suggestion to flash stock ROM+SPL.

gerakas23 said:
Thank you very much for your response! I followed your suggestion to go back to the stock rom and spl and then flash cooked rom, although Energy roms still refused to install after all this procedure! I don't know why, because they have been working and installed just fine in the past. I suceed on flashing a Miris rom, not the latest one but an old one I had in my computer and fortunately it worked! So, according to the results of my experiment, my phone accepts WM6.5 roms, but not Energy roms! I will be waiting for an update of Energy roms to see if the new version will be accepted by my phone!!!
Thanks again for the assistance!
Click to expand...
Click to collapse
hmmm, after returning to stock rom & SPL. What was your SPL in bootloader? Did you follow dummies guide afterwards and use USPL or HSPL before trying to flash NRG rom? Did you try a different rom? Whats your current SPL?

Help with upgrade to WM6.5

Hi all,
please if someone can help me solve problem.
I got few days ago Touch Diamond2. It has WM6.1 ROM on it. I tried to upgrade with official ROM from htc.com to wm6.5 but it hangs on 18% with error "communication error". Phone turned on in recovery mode. After that i tried flashing with custom roms but no luck again. It hangs on HTC screen when booting and nothing happens. I flashed it back with shipped 6.1 ROM from HTCpedia and it started normal.
When i start it in boot load mode it states 1.33 Olinex SPL. Do i need to put original hardSPL before upgrading to official ROM or there is something else i am missing?
Tnx in advance

Borna_bkpdata said:
Hi all,
please if someone can help me solve problem.
I got few days ago Touch Diamond2. It has WM6.1 ROM on it. I tried to upgrade with official ROM from htc.com to wm6.5 but it hangs on 18% with error "communication error". Phone turned on in recovery mode. After that i tried flashing with custom roms but no luck again. It hangs on HTC screen when booting and nothing happens. I flashed it back with shipped 6.1 ROM from HTCpedia and it started normal.
When i start it in boot load mode it states 1.33 Olinex SPL. Do i need to put original hardSPL before upgrading to official ROM or there is something else i am missing?
Tnx in advance
Click to expand...
Click to collapse
updating your Hard-Spl to HSPL 1.83 first ! in order to flash WM 6.5 rom or custom rom

Hi and tnx for quick answer.
Just to confirm. I need to update even if I want to flash official WM6.5 rom from htc.com?

Borna_bkpdata said:
Hi and tnx for quick answer.
Just to confirm. I need to update even if I want to flash official WM6.5 rom from htc.com?
Click to expand...
Click to collapse
I think it could, try it !

Doesn't the official WM6.5 ROM update include an embedded SPL though? Although if flashing from official ROM to custom ROM or vice versa you'd definitely need to update HSPL.

netrial said:
Doesn't the official WM6.5 ROM update include an embedded SPL though? Although if flashing from official ROM to custom ROM or vice versa you'd definitely need to update HSPL.
Click to expand...
Click to collapse
Please Read Carefully the instruction for installing HSPL 1.83 or better to upgrade it to 2.51.OliNex.Make Sure U Have a internet connection on as hspl needs internet to install.