Hey guys, I just got a htc one m7 at a good price because of its problem with charging. there is still no fix for the no charging problem on the htc One m7?
On the stock rom i needed to reboot , go in safe mode, reboot again and then it was charging untill i got a phone call and it stoped ..
Then I have installed a costum rom and every time I want to charge it i need to reboot my phone and if i close the screen or recieve a phone call it cancels the charging and i need to reboot again..to charge it..and charging is very very slow eaven though it is on AC mode , i am currently running Slim rom 4.4.4 ( first time i tried withouth installing a costum ketnel, still no fix ) now I have installed a costum kernel and still the same thing..please guys help me!
STILL NO FIX/HELP?? PLEASE GUYS IT IS DRIVING ME CRAZY!!!!
alexandru.j91 said:
STILL NO FIX/HELP?? PLEASE GUYS IT IS DRIVING ME CRAZY!!!!
Click to expand...
Click to collapse
You have tried with both stock and custom roms with the same results. It is a hardware issue most likely a loose connection. Send it to a repair center.
If it were a hardware issue why it chsrges after reboot only?
Related
Hello everybody !
I use a stock 2.2 ROM on my N1 for a while and started to experience a strange problem - when i switch on the device it vibrates 7 times and does not turn on. The screen is black.
Removed the battery, tried again, the same result.
What this could mean ? Please, help !
baudy2 said:
Hello everybody !
I use a stock 2.2 ROM on my N1 for a while and started to experience a strange problem - when i switch on the device it vibrates 7 times and does not turn on. The screen is black.
Removed the battery, tried again, the same result.
What this could mean ? Please, help !
Click to expand...
Click to collapse
Try reflashing the stock RUU rom... should fix it. If not, you need to call for support.
The vibrates mean the phone can't initialise... normally fixed by a battery pull.
Hello
I had some trouble with a bricked SGS for about 3 weeks ago but got it on the run again with some flashing help.
Now i have this strange problem. If i turn it off or if it just goes black out, which it has begun to do after i flashed it, then it can't turn on, it just show the sun looking loading icon and then a empty battery icon and then turns off.
I can't load recovery mode with the combo, but i can make the download mode combo work.
But if i connect the phone with the charger/usb i recognize it and show that it charging up. Now it boot and shows the Galaxy I9000 model no. image.
Had tried flashing newer versions From XXJPO -> XXJPY -> XWJS3 and both with and without pre-partition and it still occur.
Now the question: Does any of you experienced people know this problem and can it be fixed somehow ?
Thank you in advance
First i would liik to charge phone for 24 hours and also check with another battery .
jje
JJEgan said:
First i would liik to charge phone for 24 hours and also check with another battery .
jje
Click to expand...
Click to collapse
The battery don't seem to be defected. Once the phone is booted with a cable connected, it goes without problems. It just will not boot without a charging signal.
Bump - Still actual
Try using Block 2 Odin method here to go back first to Eclair and if that works test phone then upgrade to Froyo .
jje
JJEgan said:
Try using Block 2 Odin method here to go back first to Eclair and if that works test phone then upgrade to Froyo .
jje
Click to expand...
Click to collapse
That happened to me a while back and I couldn't find a fix for it. Ended up doing the above and it resolved it.
Z3icon said:
Hello
I had some trouble with a bricked SGS for about 3 weeks ago but got it on the run again with some flashing help.
Now i have this strange problem. If i turn it off or if it just goes black out, which it has begun to do after i flashed it, then it can't turn on, it just show the sun looking loading icon and then a empty battery icon and then turns off.
I can't load recovery mode with the combo, but i can make the download mode combo work.
But if i connect the phone with the charger/usb i recognize it and show that it charging up. Now it boot and shows the Galaxy I9000 model no. image.
Had tried flashing newer versions From XXJPO -> XXJPY -> XWJS3 and both with and without pre-partition and it still occur.
Now the question: Does any of you experienced people know this problem and can it be fixed somehow ?
Thank you in advance
Click to expand...
Click to collapse
i agree wiv the suggetions frnds given.galaxy is hard to brick.i did all sort of unusual things an even uptodate lol.don worri m8 jus flash to older stock and hard reset.check the connectivity pins,to b clean even the battri pins.somtimes its best u format ur eternal xd on pc an format.and giving another hard rest makes things better.i had once formated my int sd on pc and the phone had emptied,then i flashed and things worked fine.personally sticking to stock rom is better if u dont wan troubles,cause every custom rom has som drawback an needs a lil knownledge to tweak it up.check kies if ur on it,i recomend download the recovery driver in it.hope u get some help.cheeeerzzzz
Same here...
Hello everyone,
I too have the same issue as stated in the first post.
I even had issue sometimes that when boot up.
The USB notification icon wouldnt turn off even if i wasn't connected.
Some threads suggested that I clean the USB port, which i did and nothing changed, even if it looked a little bit dirty in there (Hard to say since it is really small).
Now the USB port looks just as new but same issue: I cant power on the unit witout having it connected with a power cord.
Also, when offline in download mode, Odin detect the unit and I can flash my device (Which I did yesterday by flashing UGJH2 re-partition and UGJL2 not re-partition) but when boot up, I can't make it to sync up with the computer. No sync possible (Also now I'm not rooted anymore).
The unit is under warranty but since it is unlocked with a tool that needed rooting to lock back, abviously I would need to be rooted again but to do it, I need to be able to sync it with my PC (No cant do here).
I have some engineer at work that offered me to check it out for me, they think it is related with the USB port, but I'm worried about the warranty seal. I found how to disasemble it but does anybody knows where it could be located on the I9000M from bell (Vibrant)? Does it have one?
Anybody have any better suggestion or a second opinion, please?
Its my 3rd Galaxy S from Bell and Samsung is now the last company I would think when buying a new mobile.
EDIT: Did the Block 2 Method and now it doesnt even want to boot at all (Did the JPY_JPY_JPY.tar part), now it shows the loading sign even faster and the battery doesnt even show it self at all.
Hello again people!
Got my friend engineers to open the phone and they didnt find anything that would cause my issue (Also no warranty label...).
Does anybody knows how to root a Galaxy S with Froyo without a PC?
I want to return my phone to Bell Canada under warranty but my phone is unlocked and I want to lock it back before sending it back and I need to be rooted to do so...
Thanks for your help!
I got the same problem here. Could someone tell me more on this. What is this Block 2 ODIN method?
this problem can be caused by water or sweat that got inside the case of your sgs.
the biggest hole in the case is micro-usb port) i think condensation accumulated there and locked some contacts.
try to disassemble the phone and carefully clean and dry it.
this helped me.
Hello people,
I have searched a lot on google en XDA to solve my problem, but i can't find it. The temperature of my Samsung Galaxy s GT-i9000 is to low, to be exact -7° degrees.
The problem is that i can't charge my phone now. The phone says: Charging paused. Battery temperature is too high or too low.
Can anyone help me, is would appreciate it a lot!
That's unusual to be honest ^^ , maybe if you put your phone ( or the battery ) in a worm place this problem will be solved , lol i can't even imagine what you've done to make it -7degrees ..
If the temperature of the phone is nrml and you're getting this msg for no reason u can reset it to factory settings , this will probably fix any software problems.
Good luck
i have reset a lot of times my factory settings. Do you have more solutions? (sorry for my English, i speak dutch) Thanks
did u flash any rom?
How old is your phone(battery)
Try a factory wipe,as suggested in the above post,maybe it's an app that caused the prob
I know for sure it's not my battery because had a other battery in it and it said the same. What i was forgotten to say was that my computer recognize my phone as a samsung galaxy, that is really strange. He doesn't want to charge.
Can you manage to get into recovery mode (by clicking vol up+home+power)? If you can, go to "advanced>wipe battery stats", and see if that fixes the problem.
did u flash any rom(kernel) if not,then I think your battery chipset is broken.
If u did flash any rom try format your system in recovery and flash a new rom first from cwm and if this doesn't fix then format again and flash a rom with Odin
Good luck
Yes i can it didn't work. Could a Kernel help me? Or has anyone have a link to rom which could help me?
Stock rom(jvu) get it from sammobile.com or search for darky's rom and flash this through ODIN.if u never tried odin then search and read how to use it
Thanks i'll try to install the darky rom. I tell you if it helps and when it doesn't i tell is also.
Have you flashed custom rom before? If yes try darky or something. If no is your phone still under warranty? If yes don' t flash anything and take it in. If no flash darky or other rom to see if you can resolve issue.
Sent from my GT-P7500 using Tapatalk 2
Thanx ,cos I never heard of this problem before,so it would be nice with a follow up
Hope u will get fixed.
Good luck m8
Sorry m8 it didn't work. I installed the darky rom and the problem is still there. I installed the Rom by CWM recovery. It couldn't work with odin
Could anyone help me with this problem?
Use darky's 10.2 TAR file this is flashable with Odin or any other .tar file.
@RAMAD rooted roms is tar and only flashed in Odin.search ramad
it diden't work. Could it be solved with a secret code or something? I don't think it is a hardware problem because i can connect with my computer.
dubbelr said:
it diden't work. Could it be solved with a secret code or something? I don't think it is a hardware problem because i can connect with my computer.
Click to expand...
Click to collapse
Hi, did you find a solution to the problem? I have the same problem after leaving my phone in a hammock in the rain (probably not the greatest of ideas). The phone works fine, but won't charge the battery. My solution so far was to buy a separate charger to charge the battery (about $10 from Amazon), but if there is a way to stop the battery check that would be much better than having to take out the battery every day to charge it.
Regards,
Svein
svein.berg said:
Hi, did you find a solution to the problem? I have the same problem after leaving my phone in a hammock in the rain (probably not the greatest of ideas). The phone works fine, but won't charge the battery. My solution so far was to buy a separate charger to charge the battery (about $10 from Amazon), but if there is a way to stop the battery check that would be much better than having to take out the battery every day to charge it.
Regards,
Svein
Click to expand...
Click to collapse
I'm having the same issue. It just started yesterday. Even with low use the phone gets hot and it won't let me charge it. I keep getting the battery temperature error. Even when it's powered off. I went into recovery mode as suggested by a previous poster and there is no advanced options that I can see. I'm not rooted and bone stock. Very frustrating. I've also tried another OEM battery to no avail.
HELP! http://forum.xda-developers.com/ima charging paused battery temperature too low
Hello guys, I get that message whenever I charge it or connect it to PC
my phone is galaxy s2 and the ROM is ICS 4.0.4
if anyone can help me. THanks
The problem is in the charge port flex it self. i work for a cell phone repair shop. i fix this issue all the time. its just a trac on the flex that goes bad. easy replacement fix. Here is a link to buy one.
http://www.ebay.com/itm/USB-Charge-...e_Replacement_Parts_Tools&hash=item3a841732e2
hi all
i do root to my phone
and after install superuser my phone doesn't work and didn't response to ant thing
i cant enter to fastboot
and when i plug charge cable notification led is flashed and phone still not work
what can i do?
Hiiii charg ur phone I had face same problem I just charge my phone after 1 day it sudden start this is happen two times
Kiran Amin said:
Hiiii charg ur phone I had face same problem I just charge my phone after 1 day it sudden start this is happen two times
Click to expand...
Click to collapse
You have to go back to stock rom. In the general thread see my guide
So I did a big mistake,I tried too many custom roms and I think I messed up my phone. My current custom rom is Resurrection Remix.
Few days ago my phone was having a weird problem,my recovery was gone,and the phone's screen turned black after 2 mins of booting up.However this issue solved automatically,I reinstalled recovery. ( I should have reflashed the custom rom,but I didn't:crying The settings was still missing,but I ignored it as there was not much use of settings.
Fast forward to today's morning , the phone was at 7% I don't know what I thought but I decided to give it a reboot.AND now my phone is not starting(It's not bootloop ,the phone is not even starting up).The battery is not charging up(It's very difficult to get new battery for Nokia X2,that would be the last thing I'd want to do,that or either buying a new phone)
.There is no light,no vibration whenever I connect my charger.I got my charging socket changed but nothing is working.I think it's a software issue.
Please is there anything I can do to recover my phone? Anything?:crying:
make sure your battery is ok and charged.
then try to flash the phone using pc with "nokia x2 tools" and a custom ROM and recovery