Where is the option the turn off and on volte went to phone settings it is not there thanks
Sent from my SM-N910T using XDA Premium 4 mobile app
jpeps said:
Where is the option the turn off and on volte went to phone settings it is not there thanks
Sent from my SM-N910T using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Excellent question. The note 3 had this option but I haven't seen it in any note 4 rom.
jpeps said:
Where is the option the turn off and on volte went to phone settings it is not there thanks
Sent from my SM-N910T using XDA Premium 4 mobile app
Click to expand...
Click to collapse
They are located in the phone app settings. At least that is where mine are located.
If you can not locate them, I would do a backup and restore of your current firmware to see if that fixes the issue.
No setting for volte??
Sent from my SM-N910T using XDA Premium 4 mobile app
You're phone is doing it automatically.
On att and t mobile it's automatic.
---------- Post added at 10:32 PM ---------- Previous post was at 10:31 PM ----------
For AT&T and T-Mobile users, there is no setting you need to apply to your account or any interaction with customer service at all. They upgrade the network equipment to allow VoLTE traffic, and if your phone is capable it works. Not all phones are capable, and some — like the Galaxy Note 3 — need to be on the latest software. It's likely that all future "flagship" models will be VoLTE capable.
Not true. Tmobile has the options to turn it off.
Sent from my SM-N910T using XDA Free mobile app
Go to the dial pad itself. Press the settings button in the upper right corner with the three dots. This setting menu has the option.
---------- Post added at 07:56 PM ---------- Previous post was at 07:55 PM ----------
Oh under settings go to the call tab.
I'm using an AT&T sim.
Nope not on Contacts version 4.4.4-N910FXXU1ANK4.
speedy1979 said:
Nope not on Contacts version 4.4.4-N910FXXU1ANK4.
Click to expand...
Click to collapse
Have you tried dirty flashing your rom? May not have taken when updating from last firmware version.
strider5236 said:
Have you tried dirty flashing your rom? May not have taken when updating from last firmware version.
Click to expand...
Click to collapse
I clean installed Xnote-V3 port by Turilo. The baseband is the latest NK4.
This is what the settings menu under the dialer app shows.
---------- Post added at 10:16 PM ---------- Previous post was at 09:45 PM ----------
strider5236 said:
Have you tried dirty flashing your rom? May not have taken when updating from last firmware version.
Click to expand...
Click to collapse
Okay I figured out what the problem is. The contacts application X-note Rom uses is the international version instead of the Tmobile version which is 4.4.4-N910TUVU1ANK4.
I am going to try restoring the Tmobile version using Nandroid manager.
speedy1979 said:
I clean installed Xnote-V3 port by Turilo. The baseband is the latest NK4.
This is what the settings menu under the dialer app shows.
---------- Post added at 10:16 PM ---------- Previous post was at 09:45 PM ----------
Okay I figured out what the problem is. The contacts application X-note Rom uses is the international version instead of the Tmobile version which is 4.4.4-N910TUVU1ANK4.
I am going to try restoring the Tmobile version using Nandroid manager.
Click to expand...
Click to collapse
Yeah I was going to suggest that it was the rom considering it is a port to T-Mobile and could have issues. Glad you thought of that to.:good:
Related
I am getting the "maximum roll-out exceeded" message on my device, so I tried to plug in the gear to my computer, and update via Kies. However, when I plug in my gear, Kies does not stop searching for new gear firmware. Kies will recognize that a gear is plugged into the computer, but it does not display the current Gear firmware verson, and the line that is supposed to display the latest firmware version only says "searching..."
Has anyone else had this problem, and if so, was anyone else able to fix the problem?
You need to run Kies 2.7 for th gg. Kies 3 does not support gg. Go figure
Sent from my SAMSUNG-SM-N900A using Tapatalk
brookfield said:
You need to run Kies 2.7 for th gg. Kies 3 does not support gg. Go figure
Sent from my SAMSUNG-SM-N900A using Tapatalk
Click to expand...
Click to collapse
It appears that I have version 2.6. I tried Kies 3, it told me that the gear was not supported, so I went back to 2.6, where I had the searching problem
I just saw a note in another thread about installing a latent version of Kies to allow for support of devices that are not running newer versions of firmware. Going to give that a shot. I'll post my findings shortly.
---------- Post added at 07:45 PM ---------- Previous post was at 07:17 PM ----------
The earlier version of Kies found the device and updated the firmware to MK7. All is working well now!
Thanks to everyone!
I'm on Kies 2.6 & W8.1 But kies not seeing my gear, usb debugging is on
CISPhD said:
I just saw a note in another thread about installing a latent version of Kies to allow for support of devices that are not running newer versions of firmware. Going to give that a shot. I'll post my findings shortly.
---------- Post added at 07:45 PM ---------- Previous post was at 07:17 PM ----------
The earlier version of Kies found the device and updated the firmware to MK7. All is working well now!
Thanks to everyone!
Click to expand...
Click to collapse
Might you have a link to that other thread?
I didn't have to turn on debugging on my gear for it to work on my windows 8.1 machine
Sent from my SAMSUNG-SM-N900A using xda app-developers app
---------- Post added at 02:24 PM ---------- Previous post was at 02:23 PM ----------
brookfield said:
You need to run Kies 2.7 for th gg. Kies 3 does not support gg. Go figure
Sent from my SAMSUNG-SM-N900A using Tapatalk
Click to expand...
Click to collapse
The gear runs an earlier version of android hence the issue.
Sent from my SAMSUNG-SM-N900A using xda app-developers app
colts187 said:
I didn't have to turn on debugging on my gear for it to work on my windows 8.1 machine
Sent from my SAMSUNG-SM-N900A using xda app-developers app
---------- Post added at 02:24 PM ---------- Previous post was at 02:23 PM ----------
The gear runs an earlier version of android hence the issue.
Sent from my SAMSUNG-SM-N900A using xda app-developers app
Click to expand...
Click to collapse
Do you or anyone have kies 2.7?
Ta
Can't find Kies 2.7
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
Hey there.. new to the forum. I'm enjoying trying all of the ROMS for my ATT Note 3. The latest Hyperdrive Rom (v7) looks great.. but, mobile data does not work. Any one else running into this? The button is toggled on.. but, there's no internet. Any help would be great! thx
@
hi
@ttnote3 said:
Hey there.. new to the forum. I'm enjoying trying all of the ROMS for my ATT Note 3. The latest Hyperdrive Rom (v7) looks great.. but, mobile data does not work. Any one else running into this? The button is toggled on.. but, there's no internet. Any help would be great! thx
@
Click to expand...
Click to collapse
Go settin apn. push manual apn carrier data work fine for me :good:
jan g said:
Go settin apn. push manual apn carrier data work fine for me :good:
Click to expand...
Click to collapse
I don't understand.
He is telling you to manually add the apn to your phone
Sent from my SAMSUNG-SM-N900A using Tapatalk
jerrycoffman45 said:
He is telling you to manually add the apn to your phone
Sent from my SAMSUNG-SM-N900A using Tapatalk
Click to expand...
Click to collapse
I hear you.. I don't know how to do that.. can you direct me to a guide?
thx
p.s. Hyperdrive RLS6 worked great.. didn't have this issue.. any way to contact the developer and ask that they simply fix it?
Yeah you can go to that rom thread click on the devs name and pick send a private message but the problem has been reported in that thread so he is probably aware of it and will fix it soon
Sent from my SAMSUNG-SM-N900A using Tapatalk
---------- Post added at 02:13 PM ---------- Previous post was at 02:07 PM ----------
To add the apn go to settings, more networks,mobile networks then access points names and click the plus symbol in the upper right hand corner the apn you need to put in is in the last post of the hyperdrive rom thread
Sent from my SAMSUNG-SM-N900A using Tapatalk
jerrycoffman45 said:
Yeah you can go to that rom thread click on the devs name and pick send a private message but the problem has been reported in that thread so he is probably aware of it and will fix it soon
Sent from my SAMSUNG-SM-N900A using Tapatalk
---------- Post added at 02:13 PM ---------- Previous post was at 02:07 PM ----------
To add the apn go to settings, more networks,mobile networks then access points names and click the plus symbol in the upper right hand corner the apn you need to put in is in the last post of the hyperdrive rom thread
Sent from my SAMSUNG-SM-N900A using Tapatalk
Click to expand...
Click to collapse
I actually found the ATT settings.. put them in and it works great now. Odd that it didn't work automatically
Hi,
My Gear Live is stuck at 5.0.1. How do I update it? Any help?
newToGearLive said:
Hi,
My Gear Live is stuck at 5.0.1. How do I update it? Any help?
Click to expand...
Click to collapse
Factory reset it and leave it charging. The update will begin. Also if you need to root use the tool in the development forum
Sent from my SM-N910T3 using XDA-Developers mobile app
I had a developer version on my watch. Watch reset didn't do anything. I did attempted to flash it, but obviously didn't get something right and at this point my watch showing green android with red thanks on top and asking to sideload a file.
You will need to sideload the stock rom now. If you search the entire forum the answers are there. I am very busy or I would be able to help you out more.
Sent from my SM-N910T3 using XDA-Developers mobile app
---------- Post added at 10:46 AM ---------- Previous post was at 10:45 AM ----------
http://forum.xda-developers.com/showthread.php?t=3355974
Sent from my SM-N910T3 using XDA-Developers mobile app
---------- Post added at 10:48 AM ---------- Previous post was at 10:46 AM ----------
http://forum.xda-developers.com/showthread.php?t=2846696
Sent from my SM-N910T3 using XDA-Developers mobile app
I keep finding references to unlocking phones that have been google locked but very little and nothing that has worked to get past the Samsung account locked setup page due to abnormal factory reset. Picked up an S6 AT&T branded for cheap cause the guy said it was Google locked. Not so, it is Samsung locked. I can bypass Google FRP but not Samsungs. Phone is running Marshmallow 6.0.1. IMEI data says it is clean and ready for activation. Serial number is not blacklisted. I can get into the phone settings but cannot change the account information. I even went to Samsung and registered a new account and this phone with the IMEI. Still wouldn't let me log in, says "processing failed." Wondering if rolling it back to lollipop would let me access or clear the Samsung account data. Any ideas would be greatly appreciated.
How did you solve the problem? I have SM-G920A and fw PDJ1 marshmallow 6.0.1
Joe_Hill said:
I keep finding references to unlocking phones that have been google locked but very little and nothing that has worked to get past the Samsung account locked setup page due to abnormal factory reset. Picked up an S6 AT&T branded for cheap cause the guy said it was Google locked. Not so, it is Samsung locked. I can bypass Google FRP but not Samsungs. Phone is running Marshmallow 6.0.1. IMEI data says it is clean and ready for activation. Serial number is not blacklisted. I can get into the phone settings but cannot change the account information. I even went to Samsung and registered a new account and this phone with the IMEI. Still wouldn't let me log in, says "processing failed." Wondering if rolling it back to lollipop would let me access or clear the Samsung account data. Any ideas would be greatly appreciated.
Click to expand...
Click to collapse
I know exactly what youre going through. Check out my post about Samsung FRP lock bypassed. kevlar62
I can help.
Sent from my SAMSUNG-SM-G920A using XDA-Developers Legacy app
---------- Post added at 06:27 AM ---------- Previous post was at 06:22 AM ----------
First factory reset and then turn phone on and you should be a start screen. Lmk
Sent from my SAMSUNG-SM-G920A using XDA-Developers Legacy app
---------- Post added at 06:28 AM ---------- Previous post was at 06:27 AM ----------
monciciatko said:
How did you solve the problem? I have SM-G920A and fw PDJ1 marshmallow 6.0.1
Click to expand...
Click to collapse
kevlar62 said:
I can help.
Sent from my SAMSUNG-SM-G920A using XDA-Developers Legacy app
---------- Post added at 06:27 AM ---------- Previous post was at 06:22 AM ----------
First factory reset and then turn phone on and you should be a start screen. Lmk
Sent from my SAMSUNG-SM-G920A using XDA-Developers Legacy app
Click to expand...
Click to collapse
kevlar62 said:
I can help.
Sent from my SAMSUNG-SM-G920A using XDA-Developers Legacy app
---------- Post added at 06:27 AM ---------- Previous post was at 06:22 AM ----------
First factory reset and then turn phone on and you should be a start screen. Lmk
Sent from my SAMSUNG-SM-G920A using XDA-Developers Legacy app
Click to expand...
Click to collapse
Sent from my SAMSUNG-SM-G920A using XDA-Developers Legacy app
---------- Post added at 06:59 AM ---------- Previous post was at 06:28 AM ----------
It doesn't matter what software you had then it only what you have
Sent from my SAMSUNG-SM-G920A using XDA-Developers Legacy app
---------- Post added at 07:04 AM ---------- Previous post was at 06:59 AM ----------
Lmk when you're finished that
Sent from my SAMSUNG-SM-G920A using XDA-Developers Legacy app
---------- Post added at 07:49 AM ---------- Previous post was at 07:04 AM ----------
Are you still working on that? Call me. It's much easier
Sent from my SAMSUNG-SM-G920A using XDA-Developers Legacy app
---------- Post added at 07:50 AM ---------- Previous post was at 07:49 AM ----------
3612003436
Sent from my SAMSUNG-SM-G920A using XDA-Developers Legacy app
I just received the notice on the Samsung Members app that I could sign up for the One UI beta for android 10! N960U1
havetoberooted said:
I just received the notice on the Samsung Members app that I could sign up for the One UI beta for android 10! N960U1
Click to expand...
Click to collapse
Do you have a screenshot?
henklbr said:
Do you have a screenshot?
Click to expand...
Click to collapse
Just signed up as well Attaching some screenshots. Downloading right now, and will take screenshots after installed.
EDIT: Just a head's up, that I had a bootloop after installing. Not sure why as I disabled all Substratum overlays. Also was using Goodlock, and wonder if that could have messed up something. Be sure to backup your stuff just in case
If it is possible for any of you who have access to this to create a zip for others, including myself, to use. It would be greatly appreciated.
Signed up but update hasn't been sent yet
Sent from my SM-N960U1 using Tapatalk
3pcssuits said:
Signed up but update hasn't been sent yet
Sent from my SM-N960U1 using Tapatalk
Click to expand...
Click to collapse
Did you go into setting and check for updates?
Yes still nothing gives me your system is up to date
Sent from my SM-N960U1 using Tapatalk
Will this work for an At&t branded Note 9 that is unlocked and running on T-Mobile? I can't seem to find anything in the Members app.
Worked on my sprint 960u(now shows as 960U1). running the unlocked U1 firmware XAA region.
Just had to check for updates twice.
You have to sign up through the Samsung members app first. Some have reported clearing app data fixes the beta invitation banner not showing.
AFAIK This is for unlocked U1 devices only.
None of the samsung good lock, navbar apps are working though in the 10 beta.
---------- Post added at 04:44 PM ---------- Previous post was at 04:26 PM ----------
And dark mode is gone from the Google messages app.
---------- Post added at 05:04 PM ---------- Previous post was at 04:44 PM ----------
jellybear456 said:
Will this work for an At&t branded Note 9 that is unlocked and running on T-Mobile? I can't seem to find anything in the Members app.
Click to expand...
Click to collapse
If you goto settings>about phone and your model number is anything other than SM-N960U1
Then I doubt it will work.
Pretty sure I'm going back to 9 today. The absence of goodlock and no dark mode in messages app is killing me.
Clearing my theme enabled systemwide dark mode
That works with messages.
Still feel like the additional features don't make up for the loss of goodlock and some of its modules.
I got it installed. Think it's pretty nice so far. Substratum doesn't work but #hex installer still does since it's been updated to one UI 2.0. so most the apps I like to theme are still able to. Over all for a first beta it's smooth. Few tweaks had to be hunted down in settings but got figured out. Over all I'm pretty happy. Just waiting for the goodlock apps to be updated.
havetoberooted said:
I just received the notice on the Samsung Members app that I could sign up for the One UI beta for android 10! N960U1
Click to expand...
Click to collapse
i see the banner to join beta ...and i tapped on register but i didn't received any updates yet...i need help...?
Sent from my SM-N960U1 using Tapatalk
---------- Post added at 06:30 PM ---------- Previous post was at 06:30 PM ----------
i see the banner to join beta ...and i tapped on register but i didn't received any updates yet...i need help...?
Sent from my SM-N960U1 using Tapatalk
---------- Post added at 06:31 PM ---------- Previous post was at 06:30 PM ----------
3pcssuits said:
Yes still nothing gives me your system is up to date
Sent from my SM-N960U1 using Tapatalk
Click to expand...
Click to collapse
i see the banner to join beta ...and i tapped on register but i didn't received any updates yet...i need help...?
Sent from my SM-N960U1 using Tapatalk
CaP MoDy said:
i see the banner to join beta ...and i tapped on register but i didn't received any updates yet...i need help...?
Sent from my SM-N960U1 using Tapatalk
---------- Post added at 06:30 PM ---------- Previous post was at 06:30 PM ----------
i see the banner to join beta ...and i tapped on register but i didn't received any updates yet...i need help...?
Sent from my SM-N960U1 using Tapatalk
---------- Post added at 06:31 PM ---------- Previous post was at 06:30 PM ----------
i see the banner to join beta ...and i tapped on register but i didn't received any updates yet...i need help...?
Click to expand...
Click to collapse
Try to force the update by checking for system update. That's what I did and is was right after I registered.
beeree7 said:
Try to force the update by checking for system update. That's what I did and is was right after I registered.
Click to expand...
Click to collapse
still nothing happened...no update available...
Sent from my SM-N960U1 using Tapatalk
Could anyone please upload the zip? Im just so excited lol?
Dr.Lost said:
If it is possible for any of you who have access to this to create a zip for others, including myself, to use. It would be greatly appreciated.
Click to expand...
Click to collapse
did you gey your zip file i need it too?
CaP MoDy said:
did you gey your zip file i need it too?
Click to expand...
Click to collapse
Nah I'm still waiting on someone to upload theirs
got it on my unlocked unit on sprint... anyone get volte working?
Dr.Lost said:
Nah I'm still waiting on someone to upload theirs
Click to expand...
Click to collapse
please tell me if you have it...thank you
If you're registered for the beta and not getting it, its probably because you updated to the December security patch (N960U1UES3CSK1) before you successfully registered for the beta. Odin back to the November security patch (N960U1UES3CSJ1) check for a system update and you'll get the beta (N960U1UEU3ZSL2) update. Worked for me.