Related
I've been doing a lot of research on this but I'm still coming up short on a few answers.
I'm considering purchasing a Droid 3 but here's my particulars:
My personal service is V-dub. Business service is AT&T. Assuming I unlock the Droid3 can I use the V-dub service while I'm stateside and leave the AT&T SIM on-board the device? If so, is it possible to switch between AT&T/VZW service via software?
When I'm traveling international would I be able to switch to the AT&T SIM service without racking up mad billz on the VZW side of the house?
ANyone with some experience on this would be appreciated. If I can't do all this with one device then I'm leaning to buy a Nexus S.
I wanna say you can because your phone allows you to switch between GSM/Global/CDMA.
I believe this can work with the XT860 model from canada, the US XT862 however, cannot move between US carriers, but can be used anywhere outside the US
At least, that's what I've gathered from lurking here for a while.
sent from my MONSTERDroid3 from the XDA app
xt860 is gsm only, xt862 wont let you use american gsm networks
onethreeteeh said:
xt860 is gsm only, xt862 wont let you use american gsm networks
Click to expand...
Click to collapse
Is it because it doesn't do 3G frequencies?
MrObvious said:
Is it because it doesn't do 3G frequencies?
Click to expand...
Click to collapse
No, is done purposely.
MrObvious said:
Is it because it doesn't do 3G frequencies?
Click to expand...
Click to collapse
From what I have read the US GSM carriers are blocked out from being used in the phone.
here is a link
http://forum.xda-developers.com/archive/index.php/t-1284433.html
Enigmafied said:
From what I have read the US GSM carriers are blocked out from being used in the phone.
here is a link
http://forum.xda-developers.com/archive/index.php/t-1284433.html
Click to expand...
Click to collapse
According to a guy at this link Team Black Hat sells a *full* unlock code for the 3's which will allow it. This is unconfirmed but I'm Googling...
if i recall correctly, TBH offered a version of the D2G baseband firmware which they'd modified to run on any network, this cost you $100 and you had to mail it to them
i believe Cellzealot has stated that this method wont work on the D3
onethreeteeh said:
if i recall correctly, TBH offered a version of the D2G baseband firmware which they'd modified to run on any network, this cost you $100 and you had to mail it to them
i believe Cellzealot has stated that this method wont work on the D3
Click to expand...
Click to collapse
TBH released the band unlock to the public couple of months ago.It is now free. It only works on the oldest D2G radio firmware. Newer firmwares cannot be unlocked since Motorola moved the protection inside baseband which due to locked boot loader cannot be modified. This method will not work on D3 for the same reason.
Sent from my DROID2 GLOBAL using Tapatalk
I just got off of the phone with a Sprint support rep in the International services department, and according to her the SIM slot in the Sprint version of the Moto X is unlocked from the factory.
Can anyone verify that this is true?
Bump, I'm interested very much too!
Any one confirm this?
Can Any one confirm this?
Awaiting reply...
That's the point, so Americans can use Sprint in the US, but when we travel just pop in an international sim.
Sent from my XT1056 using xda app-developers app
I contacted Sprint support, they said before using it in other networks (gsm/umts) you must activate international service (which unlocks gsm). mine was not activated and here in Russia I'm stuck - phone sees our carriers but can't register. and sprint support can't help me as the phone isn't online on sprint or smth like that. that's such a pain in the ass 'cause I've had a Sprint Photon 4G before and it worked without any "making love"
stanislavshulgin said:
I contacted Sprint support, they said before using it in other networks (gsm/umts) you must activate international service (which unlocks gsm). mine was not activated and here in Russia I'm stuck - phone sees our carriers but can't register. and sprint support can't help me as the phone isn't online on sprint or smth like that. that's such a pain in the ass 'cause I've had a Sprint Photon 4G before and it worked without any "making love"
Click to expand...
Click to collapse
Is your phone displaying "Invalid SIM"? I might be having the same issue
abdulhameed said:
Is your phone displaying "Invalid SIM"? I might be having the same issue
Click to expand...
Click to collapse
Yes, "INVALID CARD - NO SERVICE"
Yes same issue here. The unlock windows wont pop up.
Sent from my GT-I9500 using xda app-developers app
Moral of the story is to not buy a Sprint Moto X for anything other then Sprint. Do your research and buy a proper GSM version.
stanislavshulgin said:
Yes, "INVALID CARD - NO SERVICE"
Click to expand...
Click to collapse
Thanks for your response, I feel relieved. Does this means that when i go back to the US i can activate for international use?
abdulhameed said:
Thanks for your response, I feel relieved. Does this means that when i go back to the US i can activate for international use?
Click to expand...
Click to collapse
Yes, I think
alexh3791 said:
I just got off of the phone with a Sprint support rep in the International services department, and according to her the SIM slot in the Sprint version of the Moto X is unlocked from the factory.
Can anyone verify that this is true?
Click to expand...
Click to collapse
Based on the many posts of people asking for how to SIM Unlock the Sprint Moto X, I'd say its not true.
---------- Post added at 08:45 AM ---------- Previous post was at 08:39 AM ----------
stanislavshulgin said:
I contacted Sprint support, they said before using it in other networks (gsm/umts) you must activate international service (which unlocks gsm). mine was not activated and here in Russia I'm stuck - phone sees our carriers but can't register. and sprint support can't help me as the phone isn't online on sprint or smth like that. that's such a pain in the ass 'cause I've had a Sprint Photon 4G before and it worked without any "making love"
Click to expand...
Click to collapse
Interesting. This is the first i've heard of that. There were other reports/posts that if your phone has active sprint service/account, you can call sprint and get the sim unlock code. Nothing was said about needing to just add international service to the account for the phone to be unlocked.
In any case, the moral of the story seems to be what Steve-x posted... If you are NOT a Sprint Customer, don't buy a Sprint X for international use due to all the posts of troubles and what seems to be impossibilities getting them SIM Unlocked (you can't just pop a non-sprint sim in "out of the box", Sprint will only unlock if your their customer, it seems no online services have the unlock codes for sprint moto X, etc).
I'm looking to get a non contract moto X but am confused by all the versions. For instance, Republic sells it for $299.
https://republicwireless.com/phones/moto-x
Is that the same moto X sold for $349 on cyber Wednesday and Saturday at
http://www.motorola.com/us/motorola-shop-all/motorola-shop-all-sale.html
If different, what's the difference?
(**I need to be able to root the phone).
Thanks
Anderson2 said:
I'm looking to get a non contract moto X but am confused by all the versions. For instance, Republic sells it for $299.
https://republicwireless.com/phones/moto-x
Is that the same moto X sold for $349 on cyber Wednesday and Saturday at
http://www.motorola.com/us/motorola-shop-all/motorola-shop-all-sale.html
If different, what's the difference?
(**I need to be able to root the phone).
Thanks
Click to expand...
Click to collapse
Republic wireless phone only works with republic wireless.
Start with your carrier then go from there. If GSM and you NEED root i suggest t-mobile or dev edition so u can unlock bootloader and always guarantee root.
What carrier are you on? As the other guy said, if you have a GSM carrier (AT&T, tmobile, other mvno's of those carriers), then go with the tmobile version. You CAN unlock the bootloader and root it, and it comes sim unlocked so you can use it on att/whatever other gsm carrier you want. If you have verizon, then get the CDMA dev edition.
aooga said:
then go with the tmobile version. You CAN unlock the bootloader and root it, and it comes sim unlocked so you can use it on att/whatever other gsm carrier you want. .
Click to expand...
Click to collapse
Sorry for jacking the thread... but does the T-mo version work on AT&T LTE?
netsyd said:
Sorry for jacking the thread... but does the T-mo version work on AT&T LTE?
Click to expand...
Click to collapse
yes
aooga said:
What carrier are you on? As the other guy said, if you have a GSM carrier (AT&T, tmobile, other mvno's of those carriers), then go with the tmobile version. You CAN unlock the bootloader and root it, and it comes sim unlocked so you can use it on att/whatever other gsm carrier you want. If you have verizon, then get the CDMA dev edition.
Click to expand...
Click to collapse
I want it as a non contract phone. Currently I'm on straighttalk and they have a system where you buy a sim from them. But I may go elsewhere. I'm debating between a moto X or a nexus 5.
Anderson2 said:
I want it as a non contract phone. Currently I'm on straighttalk and they have a system where you buy a sim from them. But I may go elsewhere. I'm debating between a moto X or a nexus 5.
Click to expand...
Click to collapse
Then get a tmobile version. Sim and bootloader unlocked, so you can use it on straigttalk or att or any of those other mvno's.
aooga said:
Then get a tmobile version. Sim and bootloader unlocked, so you can use it on straigttalk or att or any of those other mvno's.
Click to expand...
Click to collapse
Sorry if it sounds like I'm repeating questions, but I'm not from the US.
So I'm not too familiar with mobile phones being locked and sim locked and things like these.
My question is, I'm thinking of bringing a Moto X into Singapore for my daily use.
Just wondering, according to all the above comments, I should bring in a T-Mobile version instead since sim and bootloader is not locked to any carrier?
And I got one more question
All these different carrier version, the radios are the same? or do they all differ slightly? I'm asking because in Singapore, I think the radios here are a little different from the US
savagedp said:
Sorry if it sounds like I'm repeating questions, but I'm not from the US.
So I'm not too familiar with mobile phones being locked and sim locked and things like these.
My question is, I'm thinking of bringing a Moto X into Singapore for my daily use.
Just wondering, according to all the above comments, I should bring in a T-Mobile version instead since sim and bootloader is not locked to any carrier?
And I got one more question
All these different carrier version, the radios are the same? or do they all differ slightly? I'm asking because in Singapore, I think the radios here are a little different from the US
Click to expand...
Click to collapse
The radios all differ slightly. And yes, you should get the tmobile one since it's sim unlocked. I don't know the bands of your carrier, so you might have to look it up and compare it with the US bands.
Ok just checked. Seems like only 3G will work in Singapore. LTE here is band 3 and 7. whereas T-mobile seems to be just on band 4.
I have a Moto X XT1050. Its suppose to be carrier unlocked but every one i try i get the same, they cant activate.
It was recently activated on Alltel but the were just bought out by at&t. Idk what carrier this phone will work under
Can anyone help??
From what I recall, the XT1050 variant was made for regional CDMA carriers, and is probably SIM and Bootloader locked.
SIM lock will obviously not allow you to use it with a GSM based carrier's SIM. If its supposed to be SIM unlocked, that is another story... please provide specifics of what happens when "they cant activate."
Bootloader lock will prevent you from rooting, and/or flashing other firmware to it.
KidJoe said:
From what I recall, the XT1050 variant was made for regional CDMA carriers, and is probably SIM and Bootloader locked.
SIM lock will obviously not allow you to use it with a GSM based carrier's SIM. If its supposed to be SIM unlocked, that is another story... please provide specifics of what happens when "they cant activate."
Bootloader lock will prevent you from rooting, and/or flashing other firmware to it.
Click to expand...
Click to collapse
Ok so I called Verizon and the guy said it was carrier unlocked and they dont support it. I checked a few others through thier website but no luck.
The bootloader has been unlocked, the phone is rooted....the SIM I'm not sure about. It doesn't have SIM in it but it gets 2 bars of signal
KidJoe said:
From what I recall, the XT1050 variant was made for regional CDMA carriers, and is probably SIM and Bootloader locked.
SIM lock will obviously not allow you to use it with a GSM based carrier's SIM. If its supposed to be SIM unlocked, that is another story... please provide specifics of what happens when "they cant activate."
Bootloader lock will prevent you from rooting, and/or flashing other firmware to it.
Click to expand...
Click to collapse
So wait you say SIM unlocked? Is it the same as carrier unlocked?? If its unlocked then shouldn't I be able to activate with a verizon SIM maybe?
I used xt1050 in Indonesia use gsm carrier and it work fine. So i think my device is sim unlock
Josephdbrewer25 said:
So wait you say SIM unlocked? Is it the same as carrier unlocked?? If its unlocked then shouldn't I be able to activate with a verizon SIM maybe?
Click to expand...
Click to collapse
Verizon will not activate any phones that aren't Verizon branded. That's what the rep. means by "unsupported".
Some CDMA MVNOs may support it, I haven't checked around to see. Chances are T-Mo or AT&T will. As noted by another poster he found a GSM carrier in Indonesia that it works with. Chances are any European carrier will too, but that won't help him at the moment.
At&t won't take it either. I don't get it. What's the point in an unlocked phone if nobody will take it??
Sent from my DROID3 using XDA Free mobile app
So even if I activate a Verizon SIM and put it in the phone it won't work??
And Verizon has activated a non branded before.
Sent from my DROID3 using XDA Free mobile app
Josephdbrewer25 said:
Ok so I called Verizon and the guy said it was carrier unlocked and they dont support it. I checked a few others through thier website but no luck.
The bootloader has been unlocked, the phone is rooted....the SIM I'm not sure about. It doesn't have SIM in it but it gets 2 bars of signal
Click to expand...
Click to collapse
Verizon uses the XT1060... IF the listing on Wikipedia are correct, the XT1050 and XT1060 use slightly different frequency for CDMA.
Not to mention, as @glarepate has already said, Verizon will not activate a device that isn't Verizon Branded.
IN the OP you say its SIM Unlocked, now you say you're not sure about the SIM??
---------- Post added at 08:18 PM ---------- Previous post was at 08:14 PM ----------
Josephdbrewer25 said:
So wait you say SIM unlocked? Is it the same as carrier unlocked?? If its unlocked then shouldn't I be able to activate with a verizon SIM maybe?
Click to expand...
Click to collapse
SIM unlocked = Carrier Unlocked yes, at least for GSM carriers. But the GSM carriers might not offer much support getting your device working.
CDMA carriers, like Verizon, might have the GSM side unlocked (i.e. you can pop an ATT or T-Mobile or other SIM in there and use it), but the CDMA side is LOCKED. Sprint, another CDMA carrier, has the GSM side SIM LOCKED on their 2013 X (XT1056)
KidJoe said:
Verizon uses the XT1060... IF the listing on Wikipedia are correct, the XT1050 and XT1060 use slightly different frequency for CDMA.
Not to mention, as @glarepate has already said, Verizon will not activate a device that isn't Verizon Branded.
IN the OP you say its SIM Unlocked, now you say you're not sure about the SIM??
---------- Post added at 08:18 PM ---------- Previous post was at 08:14 PM ----------
SIM unlocked = Carrier Unlocked yes, at least for GSM carriers. But the GSM carriers might not offer much support getting your device working.
CDMA carriers, like Verizon, might have the GSM side unlocked (i.e. you can pop an ATT or T-Mobile or other SIM in there and use it), but the CDMA side is LOCKED. Sprint, another CDMA carrier, has the GSM side SIM LOCKED on their 2013 X (XT1056)
Click to expand...
Click to collapse
The verizon rep said it is carrier unlocked. All I know is that my step dad had it on alltel CDMA. Alltel just got bought out so that's a no go there. But the rep ask if i had a sim card, i was thinking maybe i could pop in a verizon one and it would work. Idk much about GSM but im gonna take it to a phone place in town tomorrow and see what they say.
Thanks for all of your replies
Josephdbrewer25 said:
The verizon rep said it is carrier unlocked. All I know is that my step dad had it on alltel CDMA. Alltel just got bought out so that's a no go there. But the rep ask if i had a sim card, i was thinking maybe i could pop in a verizon one and it would work. Idk much about GSM but im gonna take it to a phone place in town tomorrow and see what they say.
Thanks for all of your replies
Click to expand...
Click to collapse
Verizon doesn't sell the XT1050, so I wouldn't put any faith into what they tell you. If its not a Verizon Branded Xt1060, they will not activate it on their service PERIOD.
Verizon still uses CDMA for voice and 3G data. So even if you put a Verizon 4GLTE SIM in there, it wont work.
The Verizon XT1060 is GSM Unlocked out of the box. (This is due to FCC C-Block Rules), so IF this was a Verizon XT1060, you could put a T-Mobile, ATT, Rogers, etc SIM in there and use the GSM side.
BUT you said this phone is an XT1050. So its not the same.
Good luck.
KidJoe said:
Verizon doesn't sell the XT1050, so I wouldn't put any faith into what they tell you. If its not a Verizon Branded Xt1060, they will not activate it on their service PERIOD.
Verizon still uses CDMA for voice and 3G data. So even if you put a Verizon 4GLTE SIM in there, it wont work.
The Verizon XT1060 is GSM Unlocked out of the box. (This is due to FCC C-Block Rules), so IF this was a Verizon XT1060, you could put a T-Mobile, ATT, Rogers, etc SIM in there and use the GSM side.
BUT you said this phone is an XT1050. So its not the same.
Good luck.
Click to expand...
Click to collapse
Well something weird happened while my X was in recovery mode. It was plugged into my laptop and it popped up up "Install drivers for your XT1060." Do they all say that or is mine just being stupid?
How can I determine what model of the X I have, I'm so confused about this phone man.
glarepate said:
Verizon will not activate any phones that aren't Verizon branded. That's what the rep. means by "unsupported".
Some CDMA MVNOs may support it, I haven't checked around to see. Chances are T-Mo or AT&T will. As noted by another poster he found a GSM carrier in Indonesia that it works with. Chances are any European carrier will too, but that won't help him at the moment.
Click to expand...
Click to collapse
Can you tell me any other carriers inside the US, lol. I already checked with AT&t, got the same thing as with Verizon. Not sure about T-Mo, that's the only one I haven't checked that picks up where I live. I have a great phone and can't even activate it. It kinda sucks.
And one more thing, sorry if I'm being a pain but why couldn't I use a Verizon SIM in it and it'd work??
I have used my XT1050 on Verizon by swapping out the Sim. It is carrier unlocked. I was also able to unlock my bootloader using the Motorola website.
Sent from my XT1050 using XDA Free mobile app
Josephdbrewer25 said:
Can you tell me any other carriers inside the US, lol. I already checked with AT&t, got the same thing as with Verizon. Not sure about T-Mo, that's the only one I haven't checked that picks up where I live. I have a great phone and can't even activate it. It kinda sucks.
And one more thing, sorry if I'm being a pain but why couldn't I use a Verizon SIM in it and it'd work??
Click to expand...
Click to collapse
By all means check with T-Mo. They are trying to get more customers and may be willing to work with you. They tend to be more flexible that AT&T anyway.
Ting uses Sprint (so that may not work for you if there is no coverage) and Cricket uses AT&T, both have BYOD.
https://ting.com/byod
https://www.cricketwireless.com/shop/byod.html
I know there are others but these are just off the top of my head.
zachw91 said:
I have used my XT1050 on Verizon by swapping out the Sim. It is carrier unlocked. I was also able to unlock my bootloader using the Motorola website.
Sent from my XT1050 using XDA Free mobile app
Click to expand...
Click to collapse
So all I gotta do is use a verizon sim in it?? I'm gonna try it. I'm just trying to figure out what the phone can be activated with, lol.
glarepate said:
By all means check with T-Mo. They are trying to get more customers and may be willing to work with you. They tend to be more flexible that AT&T anyway.
Ting uses Sprint (so that may not work for you if there is no coverage) and Cricket uses AT&T, both have BYOD.
https://ting.com/byod
https://www.cricketwireless.com/shop/byod.html
I know there are others but these are just off the top of my head.
Click to expand...
Click to collapse
Sprint doesn't have coverage here, not sure about T-Mo. At&t gets coverage here now, they use to not.
The last carrier the phone was activated with was Alltel but they were bought out. I'll check and call around
Thanks everybody!!
Josephdbrewer25 said:
Well something weird happened while my X was in recovery mode. It was plugged into my laptop and it popped up up "Install drivers for your XT1060." Do they all say that or is mine just being stupid?
How can I determine what model of the X I have, I'm so confused about this phone man.
Click to expand...
Click to collapse
THe FCC ID on the XT1050 and XT1060 appear to be the same.
I haven't done enough digging to confirm the similarities or differences between the XT1050 and XT1060. As I said earlier, IF the wikipedia entry for the 2013 X is correct, at least the CDMA frequencies are slightly different.
I have seen my Verizon Dev Edition XT1060 list another model at one point when trying to install drivers. (ANd I've always had the stock roms installed.) so I'd just say its a little strange from time to time.
Any querries you can do of the phone right now are all software based, so if you have an XT1050 ROM on the phone, the results would say its an XT1050. If you have a 3rd party ROM on there, you likely wont see an accurate model number.
The best way is... IF the phone has the original Moto back on it.. look for the small, very fine, print at the bottom on the back. Sometimes you have to tilt the phone side to side to get light to reflect off it just right... and If you have eyes like mine, you might need a magnifying glass to read it. It will have the FCC ID and the model number on it.
KidJoe said:
THe FCC ID on the XT1050 and XT1060 appear to be the same.
I haven't done enough digging to confirm the similarities or differences between the XT1050 and XT1060. As I said earlier, IF the wikipedia entry for the 2013 X is correct, at least the CDMA frequencies are slightly different.
I have seen my Verizon Dev Edition XT1060 list another model at one point when trying to install drivers. (ANd I've always had the stock roms installed.) so I'd just say its a little strange from time to time.
Any querries you can do of the phone right now are all software based, so if you have an XT1050 ROM on the phone, the results would say its an XT1050. If you have a 3rd party ROM on there, you likely wont see an accurate model number.
The best way is... IF the phone has the original Moto back on it.. look for the small, very fine, print at the bottom on the back. Sometimes you have to tilt the phone side to side to get light to reflect off it just right... and If you have eyes like mine, you might need a magnifying glass to read it. It will have the FCC ID and the model number on it.
Click to expand...
Click to collapse
I have the stock ROM installed but a custom recovery. It's the XT1050. This phone is weird lol
KidJoe said:
THe FCC ID on the XT1050 and XT1060 appear to be the same.
I haven't done enough digging to confirm the similarities or differences between the XT1050 and XT1060. As I said earlier, IF the wikipedia entry for the 2013 X is correct, at least the CDMA frequencies are slightly different.
I have seen my Verizon Dev Edition XT1060 list another model at one point when trying to install drivers. (ANd I've always had the stock roms installed.) so I'd just say its a little strange from time to time.
Any querries you can do of the phone right now are all software based, so if you have an XT1050 ROM on the phone, the results would say its an XT1050. If you have a 3rd party ROM on there, you likely wont see an accurate model number.
The best way is... IF the phone has the original Moto back on it.. look for the small, very fine, print at the bottom on the back. Sometimes you have to tilt the phone side to side to get light to reflect off it just right... and If you have eyes like mine, you might need a magnifying glass to read it. It will have the FCC ID and the model number on it.
Click to expand...
Click to collapse
Hey @KidJoe, guess what? I called the postpaid department of Verizon and the lady told me that since my Moto X was on Alltel last that I could bring it to a store and they can put it in their system. I told her everything i knew about the phone. She said it can NOT be activated on prepaid BUT it can on postpaid. Got that same info from 2 or 3 other online support reps, lol.. So in that case you CAN activate NON verizon phones on Verizon.... oh AND I flashed the Verizon firmware on it and it works great.
I purchased an unlocked Note 9 and all the networks tell me it won't work on any of theirs. AT&T, US Cellular, Verizon, Net10 all say no. I put my AT&T sim in and it works with low signal. Why would it not work? How do I figure out where this phone originated? I suspect Sprint because any phone from Sprint only works on Sprint.
gonka95 said:
I purchased an unlocked Note 9 and all the networks tell me it won't work on any of theirs. AT&T, US Cellular, Verizon, Net10 all say no. I put my AT&T sim in and it works with low signal. Why would it not work? How do I figure out where this phone originated? I suspect Sprint because any phone from Sprint only works on Sprint.
Click to expand...
Click to collapse
Did you try a T-Mobile SIM card?
Sent from my SM-N960U1 using Tapatalk
Where did you buy it?
Have you Googled the model number?
gonka95 said:
I purchased an unlocked Note 9 and all the networks tell me it won't work on any of theirs. AT&T, US Cellular, Verizon, Net10 all say no. I put my AT&T sim in and it works with low signal. Why would it not work? How do I figure out where this phone originated? I suspect Sprint because any phone from Sprint only works on Sprint.
Click to expand...
Click to collapse
Go to this site and run the IMEI. It will tell you if it's actually a U1 model or if it's a carrier model.
http://imeipro.info/samsung_imei_check.html
Whichever it is, you can just flash the ATT firmware, and it will work perfect on ATT. All the N960U and U1s are identical. Just different firmware.
Mr. Orange 645 said:
Go to this site and run the IMEI. It will tell you if it's actually a U1 model or if it's a carrier model.
http://imeipro.info/samsung_imei_check.html
Whichever it is, you can just flash the ATT firmware, and it will work perfect on ATT. All the N960U and U1s are identical. Just different firmware.
Click to expand...
Click to collapse
Sprint, that's why I'm having issues with it. I purchased via Amazon. I managed to get it working on Net10 wireless CDMA, so it'll work. Had to activate with my S8+ though. Thanks for the link, that helped!
gonka95 said:
Sprint, that's why I'm having issues with it. I purchased via Amazon. I managed to get it working on Net10 wireless CDMA, so it'll work. Had to activate with my S8+ though. Thanks for the link, that helped!
Click to expand...
Click to collapse
Well, if you want it to work on ATT, just flash the ATT firmware. Not sure why it won't work with the U1 firmware though.
Mr. Orange 645 said:
Well, if you want it to work on ATT, just flash the ATT firmware. Not sure why it won't work with the U1 firmware though.
Click to expand...
Click to collapse
Does it need root? And it has the SM-N960U1UEU1ARJ5 Baseband Version? Thanks in advanced!
gonka95 said:
Does it need root? And it has the SM-N960U1UEU1ARJ5 Baseband Version? Thanks in advanced!
Click to expand...
Click to collapse
Well you CAN'T root it, but no. You don't need root to flash official firmware with ODIN.
gonka95 said:
I purchased an unlocked Note 9 and all the networks tell me it won't work on any of theirs. AT&T, US Cellular, Verizon, Net10 all say no. I put my AT&T sim in and it works with low signal. Why would it not work? How do I figure out where this phone originated? I suspect Sprint because any phone from Sprint only works on Sprint.
Click to expand...
Click to collapse
So if you got it with flash for sprint then maybe you need flash what was originally on this model?
I have the very same model and I just put in my LTE Verizon SIM and it worked right away.
This model is a boot locked, carrier unlocked, world band snapdragon version, that was never originally touched by any carrier.
I.E. No carrier bloat ware. SM-N960U1
rusty.gh said:
So if you got it with flash for sprint then maybe you need flash what was originally on this model?
I have the very same model and I just put in my LTE Verizon SIM and it worked right away.
This model is a boot locked, carrier unlocked, world band snapdragon version, that was never originally touched by any carrier.
I.E. No carrier bloat ware. SM-N960U1
Click to expand...
Click to collapse
I flashed AT&T but cannot get wifi calling. I ordered an AT&T one through Samsung last night. I'll return this one when I get it. The back of this phone says it's an N960U.
I forgot how crappy carriers are. AT&T unlocked my iPhone but no longer recognizes it. So, I can't get wifi calling to work before switching the sim.
Thanks a bunch to everyone for their input and workarounds! Have been out of the loop for a while.
gonka95 said:
I flashed AT&T but cannot get wifi calling. I ordered an AT&T one through Samsung last night. I'll return this one when I get it. The back of this phone says it's an N960U.
I forgot how crappy carriers are. AT&T unlocked my iPhone but no longer recognizes it. So, I can't get wifi calling to work before switching the sim.
Thanks a bunch to everyone for their input and workarounds! Have been out of the loop for a while.
Click to expand...
Click to collapse
Oh, my bad, yeah the "U" models do say you might lose Wifi calling. Good it worked out for you!
I would be disappointed if I needed Wifi calling, I use the cell line 24/7 here in the US everywhere I go.
I feel like Wifi calling is just giving my carrier a break.
gonka95 said:
I flashed AT&T but cannot get wifi calling. I ordered an AT&T one through Samsung last night. I'll return this one when I get it. The back of this phone says it's an N960U.
I forgot how crappy carriers are. AT&T unlocked my iPhone but no longer recognizes it. So, I can't get wifi calling to work before switching the sim.
Thanks a bunch to everyone for their input and workarounds! Have been out of the loop for a while.
Click to expand...
Click to collapse
There's actually a way to get WiFi calling on it working again. Look through the carrier switching threads in the Note 8 forums.
It's why I hate ATT and love T-Mobile. Everything works out of the box on T-Mo.
rusty.gh said:
Oh, my bad, yeah the "U" models do say you might lose Wifi calling. Good it worked out for you!
I would be disappointed if I needed Wifi calling, I use the cell line 24/7 here in the US everywhere I go.
I feel like Wifi calling is just giving my carrier a break.
Click to expand...
Click to collapse
Well to be fair there will be places where signal will be weak or non and then you will be the one loosing.
They don't look at break is just way for the customers to get better signal every where they go or inside whatever tipe of building...
gonka95 said:
I purchased an unlocked Note 9 and all the networks tell me it won't work on any of theirs. AT&T, US Cellular, Verizon, Net10 all say no. I put my AT&T sim in and it works with low signal. Why would it not work? How do I figure out where this phone originated? I suspect Sprint because any phone from Sprint only works on Sprint.
Click to expand...
Click to collapse
Mr. Orange 645 said:
Go to this site and run the IMEI. It will tell you if it's actually a U1 model or if it's a carrier model.
http://imeipro.info/samsung_imei_check.html
Whichever it is, you can just flash the ATT firmware, and it will work perfect on ATT. All the N960U and U1s are identical. Just different firmware.
Click to expand...
Click to collapse
I also purchased an unlocked Note 9 on ebay. In "about phone", the model number is listed as SM-N960U1. On the back of the phone, it's SM-N960U.
The sites that tell you the model with the IMEI number are right, it's a Sprint phone. Samsung customer support said the same thing. However, the Sprint phone and the US unlocked phone share the same FCC ID.
Does that mean, they are the same radio hardware? Is it just the firmware that makes the difference in band capability? If you flashed the US unlocked version of baseband, would it be identical to the US unlocked version? I just want to make double sure!
mraeryceos said:
I also purchased an unlocked Note 9 on ebay. In "about phone", the model number is listed as SM-N960U1. On the back of the phone, it's SM-N960U.
The sites that tell you the model with the IMEI number are right, it's a Sprint phone. Samsung customer support said the same thing. However, the Sprint phone and the US unlocked phone share the same FCC ID.
Does that mean, they are the same radio hardware? Is it just the firmware that makes the difference in band capability? If you flashed the US unlocked version of baseband, would it be identical to the US unlocked version? I just want to make double sure!
Click to expand...
Click to collapse
Go back and read my post you quoted. It answers the question you just asked.
Mr. Orange 645 said:
Go back and read my post you quoted. It answers the question you just asked.
Click to expand...
Click to collapse
He thanked you so I'm thinking he saw it.????