Hello Guyz,
I'm running B609 which was 341 mb size. I installed it from b602.
Can u tell me how to downgrade from B609 to b133 ? cause i want to make FULL update from b133 to b609. which is 1.2 gb size update.help me guyz,thanks in advance.
you can do the full update also from the b609 OTA..
just put the update.app inside dload folder on your sdcard and perform a force update (everything will be erased, so backup your data)..
you need also to be on stock recovery!!!
i did it this way and i have no issues so far..
Gesendet von HUAWEI Ascend P7-L10 B609 - rooted
blueIBI said:
you can do the full update also from the b609 OTA..
just put the update.app inside dload folder on your sdcard and perform a force update (everything will be erased, so backup your data)..
you need also to be on stock recovery!!!
i did it this way and i have no issues so far..
Gesendet von HUAWEI Ascend P7-L10 B609 - rooted
Click to expand...
Click to collapse
Thank you for your response, can you tell me what do you mean by saying that i have to be on stock recovery ?
and also how can i perform a force update? thank you in advance.
have you rooted your phone?
Gesendet von HUAWEI Ascend P7-L10 B609 - rooted
blueIBI said:
have you rooted your phone?
Gesendet von HUAWEI Ascend P7-L10 B609 - rooted
Click to expand...
Click to collapse
uhm,never.
ok..then you just have to put the update.app inside the dload folder on your sdcard (you might have to create it on the sdcard)..
then do a backup of all your personal data - through the onboard app from huawei)..
after that turn off your phone..wait few seconds..
then you press volume up & volume down & power at the same time and hold them pressed until the screen changes into the "new" emui recovery screen (when i remember right it is a circle with emui inside)..then you can release the buttons and wait for the update to be processed..after that your phone restarts itself and then you should be able to configure your phone
that is all..
Gesendet von HUAWEI Ascend P7-L10 B609 - rooted
blueIBI said:
ok..then you just have to put the update.app inside the dload folder on your sdcard (you might have to create it on the sdcard)..
then do a backup of all your personal data - through the onboard app from huawei)..
after that turn off your phone..wait few seconds..
then you press volume up & volume down & power at the same time and hold them pressed until the screen changes into the "new" emui recovery screen (when i remember right it is a circle with emui inside)..then you can release the buttons and wait for the update to be processed..after that your phone restarts itself and then you should be able to configure your phone
that is all..
Gesendet von HUAWEI Ascend P7-L10 B609 - rooted
Click to expand...
Click to collapse
Thank you very much for your detailed explanation,by the way on my lock screen there is EMERGENCY CALL feature,how can I remove it?
i think this isn't possible (and if it needs root and a heavy modding)..
Gesendet von HUAWEI Ascend P7-L10 B609 - rooted
blueIBI said:
i think this isn't possible (and if it needs root and a heavy modding)..
Gesendet von HUAWEI Ascend P7-L10 B609 - rooted
Click to expand...
Click to collapse
Whenever I did that,there is USB icon instead of EMUI. its already 100% but it do nothing. im really confused.
I put update.app,then turned on off phone,waited like 30 seconds,then i pressed vol + vol - power key.it started to loading. its now at 100%.but is till do nothing. any solutions ?
hm..strange..
no i have unfortunately no idea atm
Gesendet von HUAWEI Ascend P7-L10 B609 - rooted
Hello
Can anyone help me as to how I could return from B609-B133 was.
B609 installation was complete. 1.3GB, but did not like it.
I would stay in the old Emui2.3. Just would like to come back onto B133.
But in case dload folder copied and three-button start the downgrade does not work.
(sorry for my English - google translator)
kkrisz75 said:
Hello
Can anyone help me as to how I could return from B609-B133 was.
B609 installation was complete. 1.3GB, but did not like it.
I would stay in the old Emui2.3. Just would like to come back onto B133.
But in case dload folder copied and three-button start the downgrade does not work.
(sorry for my English - google translator)
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=58253528&postcount=13
root problem
blueIBI said:
you can do the full update also from the b609 OTA..
just put the update.app inside dload folder on your sdcard and perform a force update (everything will be erased, so backup your data)..
you need also to be on stock recovery!!!
i did it this way and i have no issues so far..
Gesendet von HUAWEI Ascend P7-L10 B609 - rooted
Click to expand...
Click to collapse
can you please help me how to root my ascend p7 b609, i just updated it from b133sp1, and now i cant root it after i have updated to b609, i tried root genius and iroot none of them worked, can you please send me the link of instructions how to root my phone as i can see you have rooted your p7 b609, i would apreciate it, thanks:fingers-crossed:
read this carefully..
http://forum.xda-developers.com/showthread.php?p=58199638
make yourself sure you know what to do (flashing)..
Gesendet von HUAWEI Ascend P7-L10 B609 - rooted
Related
Hi. So I just flashed a boot img (or something like this) to root my P7 B609. After I rooted I changed softkeys with SoftkeyZ but I forgot to backup the softkeys (now i'm stuck with the ugliest softkeys ever); installed xposed. I want everything back because my camera doesn't work, Youtube doesn't work and all these kinds of programs. So I think I need to do hard reset to restore everything to my factory stage. If im correct how to do hard reset? Hope you understand me, sorry for my noob question and bad english..
first you must flash the stock boot.img of b609 (if you changed your recovery, this too)..
then put the b609 update.app in the folder dload on your sdcard..
after that turn off your phone..
then press power, volume up and down together (all three at the same time)..
hold them until the screen shows a circle with the EMUI writing and release the keys..then let the update do the rest
after that you should have a fresh b609 on your p7
blueIBI said:
first you must flash the stock boot.img of b609 (if you changed your recovery, this too)..
then put the b609 update.app in the folder dload on your sdcard..
after that turn off your phone..
then press power, volume up and down together (all three at the same time)..
hold them until the screen shows a circle with the EMUI writing and release the keys..then let the update do the rest
after that you should have a fresh b609 on your p7
Click to expand...
Click to collapse
THANKS! Can you give a link for the boot.img please (p7-l10) ? Cant find it nowhere.
get the huawei update extractor (can be found in p6 themes and apps section)..
then select p6 and load the b609 update.app in there..
there you can extract both boot.img and recovery.img (these files should be copied afterwards to the adb folder)..
then do the steps i mentioned before
blueIBI said:
get the huawei update extractor (can be found in p6 themes and apps section)..
then select p6 and load the b609 update.app in there..
there you can extract both boot.img and recovery.img (these files should be copied afterwards to the adb folder)..
then do the steps i mentioned before
Click to expand...
Click to collapse
God less you! You are my lifesaver!
Hello there,
I updated my P7-l10 from b620 to b621 with no problems. But when I try to update from b621 to b623 I get a error. I tried many ways (local update and force update), but it always fails "Software install failed!"
Any suggestions what should I do?
how did you update exactly?
you just have to put the update.zip into dload folder and then start updating through local update..
Gesendet von meinem HUAWEI P7-L10 B623
I extracted the zip, and put all the files in the dload
so I don't need to extract the zip?
ok, I put the zip into the dload and updated it. thank you!
Hello all,
I want to get back to a "normal system" in order to upgrade to B830. What I did so far:
- When B830 wasn´t out, I changed vendor on B621 to "custc02_vodafone_za" in order to flash B817 --> went fine
- Planning to update to B830, tried to revert trough B800 transition package to B6xx, but got an error
- Few days later flashed B830 boot.img, then tried to flash B830 through dload (someone posted that that works – but not for me)
- Flashed MiUi 5.10.17, but android.system force closed
- Tried MyRom 3.3, but errors both in cwm and twrp
- Tried Se7en Rom 3.8 (based on B602), flashing went fine. But downgrade as in the description doesn´t work.
- Flashing of B609 through dload when on Se7en-Rom/ MiUi also fails
- Flashing flashable B609.zip worked finally
So, I am now on B609, but unable to flash B621/MyRom or whatever. The Update fails immediately.
Does anybody have an idea what I could do? I would really appreciate any help!
Best wishes!
try to replace the twrp/cwm recovery with stock b609 recovery..
then force upgrade b609 again..
after that maybe the b621 update may be flashed through local or force update..
finally the b623 should appear and then the b830 (if not then flash them through local update - especially the b623)..
hope this helps
Gesendet von meinem HUAWEI P7-L10 B830
Thanks for your reply! Unfortunately I already tried that without success, but forgot to mention. The same with 3.0to2.3-downgrade-package/B830/B817..
I assume that by changing the cust following this (http://forum.xda-developers.com/ascend-p7/general/b817-vodacom-users-cust-error-changing-t3211386) guide, something went wrong. Before I did this, all was fine.
@majcomtech sorry for asking so directly, but could you imagine what my problem is? Or what else I could try to revert?
I thought a while about what I´ve done so far and came to the conclusion that downgrading using B800 transition pack failed due to my root access. Flasing Miui (based on Android 4.4) was a mistake and made things complicated.
So I thought about flashing system.img/cust.img/userdata.img/boot.img/recovery.img of B817. Is that a bad idea?
I just don´t want to make things worse and ask first.
Thank you!
I finally made it by flashing system.img/cust.img/userdata.img/boot.img/recovery.img of B817, flashing boot.img(of B830) then updating through dload to B830. B830 had some bugs (no motion control etc.) -->B800-->B621-->cust change back to eu-->reflash B621-->B623-->B830. Maybe this will help anyone, if in a similar situation..
l3Nni said:
I thought a while about what I´ve done so far and came to the conclusion that downgrading using B800 transition pack failed due to my root access. Flasing Miui (based on Android 4.4) was a mistake and made things complicated.
So I thought about flashing system.img/cust.img/userdata.img/boot.img/recovery.img of B817. Is that a bad idea?
I just don´t want to make things worse and ask first.
Thank you!
Click to expand...
Click to collapse
1. Reboot to bootloader
2. Flash CWM 3.0
3. Reboot to recovery mode
3.1 Install from SDCARD1
a. Find My-RoMv3.3.zip
3.2 Back
3.3 Wipe data/factory reset.
3.4 Advance
3.5 Reboot to Bootloader
4. Flash stock recovery for 3.0
5. Flash B621
6. Flash vendor version you want
Now all are normal.
As i wrote above, I was able to solve the problem.. I already tested the way you described , but it didn´t work since I got alway errors in CWM/TWRP.
But now all is fine and thanks for your reply anyway!
l3Nni said:
I finally made it by flashing system.img/cust.img/userdata.img/boot.img/recovery.img of B817, flashing boot.img(of B830) then updating through dload to B830. B830 had some bugs (no motion control etc.) -->B800-->B621-->cust change back to eu-->reflash B621-->B623-->B830. Maybe this help anyone, if in a similar situation..
Click to expand...
Click to collapse
Hi how did you change back to European cust in B621? I'm unable to have the right cust. Thanks
Sent from my HUAWEI P7-L10 using Tapatalk
You can find the cust files here (http://forum.xda-developers.com/showthread.php?t=3211386) in Post #1. Flash them through dload on B621 and you should get back.
Im having something similar.
I have installed the s7ver rom, based on 602.
I changed the recovery to the base one.
Now i tried flashing the update.app from the 609.
tried by force update (Vol+ + Vol- + Power) and via updade from file.
both, give a "Software Update failed" just at start.
It boots normally
Any idea????
Thanks
Look in the Se7en-Rom-3.8 Thread, there is the process oft getting back described. It's because the Rom is based on B602, a beta which is not meant for L10 devices..
l3Nni said:
Look in the Se7en-Rom-3.8 Thread, there is the process oft getting back described. It's because the Rom is based on B602, a beta which is not meant for L10 devices..
Click to expand...
Click to collapse
Found it .... ><
Thanks
http://forum.xda-developers.com/showpost.php?p=56860553&postcount=2
Hi,
I am running EVA-L09C432B378 on my P9. I also have twrp recovery.
I need to send the phone to service because i have (as many others) issues with my gps.
So i need the following:
Procedure for unrooting.
Official recovery.img for android 7.
Procedure to downgrade to android 6.
I think that with the transition package you can lock (not relock) the bootloader.
Can somebody help me?
You dload the Rollback pack .
Then you dload the B136 .
After this Bootloader locked root away. All is Original. Then you Update to B182 and Ready.
Not more. Have fun
Gesendet von meinem EVA-L09 mit Tapatalk
Simon G said:
You dload the Rollback pack .
Then you dload the B136 .
After this Bootloader locked root away. All is Original. Then you Update to B182 and Ready.
Not more. Have fun
Gesendet von meinem EVA-L09 mit Tapatalk
Click to expand...
Click to collapse
Thank you,
I am reading different users have different experiences with different versions of each update. Can you please point me to the correct files for, rollback package and b136?
Also do i have to wipe , format , erase fingerprint data , flash c432 cust , etc ?
Here are the Roll Back pack with 100 mb.
You create an folder name is dload.
In this folder you copy and paste the Update.app .
Then you Power Off Device.
Vol +Vol- Power
Update runs .
After this you delete the dload folder and create a new dload folder and copy and paste all Files from Download Eva L09 C432B136 in the dload folder.
After this Power OFF and same procedur. Vol-Vol+Power and Update runs .
After this you are Happy and wate for Updates to B182 and ....and.....
Ok B136 files comming soon
Here Rollback Pack
http://consumer.huawei.com/ch/support/products/downloads/detail/p9-chde.htm?id=92743
Here B136 on this Thread by Mega
https://www.android-hilfe.de/index.php?posts/10276894
Gesendet von meinem EVA-L09 mit Tapatalk
Hi there,
here some instructions and files for updating your Phone from Nougat to Oreo.
And how you can try a treble build and how do you come back to Stock Rom.
We start with updating Nougat to Oreo (B321_L29_C636) :
Delete fingerprint and lockscreen pin before you update!
Backup Apps etc with Huawei Backup
Extract the folder of this zip on your external sd card:
https://www.androidfilehost.com/?fid=817906626617955728
and flash oreo_update.zip with twrp.
Then its boot into nocheck recovery and install oreo.
After reboot your bootloader is still open and all apps are still there.
But you need to login to all your running accounts again. Game datas are lost too.
Some things like Themes are not working right now and you have the wrong build number.
We fix that now :
Reboot into fastboot and flash oreo twrp. (fastboot flash recovery_ramdisk twrp_oreo.img)
https://androidfilehost.com/?fid=673791459329072916
boot into twrp, flash supersu for oreo and reboot.
https://www.androidfilehost.com/?fid=745849072291698567
Thanks to "LastStandingDroid" for modified supersu.
Install a root explorer and browse to the following path:
/cust/hw/ rename "spcseas" folder to "eu"
/version/special_cust/VKY-L29/hw/ rename "spcseas" folder to "eu"
/data/hw_init/version/special_cust/hw/ rename "spcseas" folder to "eu"
then reboot.
For VKY-L29C185:
/cust/hw/ rename "spcseas" folder to "meafnaf"
/version/special_cust/VKY-L29/hw/ rename "spcseas" folder to "meafnaf"
/data/hw_init/version/special_cust/hw/ rename "spcseas" folder to "meafnaf"
If something not working well please make a factory reset with original recovery.
https://www.androidfilehost.com/?fid=673791459329071154
flash with fastboot:
fastboot flash recovery_ramdisk Original_Recovery_B321.img
Later i will add the treble part!
Here you can take a look:
https://forum.xda-developers.com/pr...-development/experimental-phh-treble-t3709659
I'm not responsible for any bricks.
Thats how I did it and its working fine.
We solve it with rename instead of flashing data file because it will come request for other firmwares.
I add a Rollback later.
Gesendet von meinem VKY-L29 mit Tapatalk
Everything work for me. If you want make a factory reset after install flash original recovery before. I upload it later.
Gesendet von meinem VKY-L29 mit Tapatalk
Is it suitable for VKY-L29C185 model?
Added rename instructions for VKY-L29C185
Rommco05 said:
Ok if I have acces to internal storage I will tommorow morning install Oreo. Is some chance you upload stock recovery to tommorow morning? Ou, anyway I can extract it from main zip (update.zip)? One more Q, if I flash stock recovery I don't need supersu and basically I can relock bootloader with stock recovery right?
Click to expand...
Click to collapse
Here is the original recovery but i would not relock the bootloader. Its possible that you brick your phone.
https://www.androidfilehost.com/?fid=673791459329071154
Rommco05 said:
Ok, change my mind I stay with custom recovery but before I make factory reset with stock recovery. Thanks for sharing. I like clean start. Before reset I will rename folders
---------- Post added at 22:59 ---------- Previous post was at 22:57 ----------
Need I flash stock recovery2 before reset?
Click to expand...
Click to collapse
Added flash instructions for original recovery. Only normal recovery needed.
Gesendet von meinem VKY-L29 mit Tapatalk
Hi blackball first of all thank you so much for keeping our p10p alive and updated....
My model is vkyl29c185 running fromfuture 201 without rebranding
Can i flash the oreo as per the OP directly without rebranding or any hassles.. Pls
Yes. Just rename folders like C185 instructions
Gesendet von meinem VKY-L29 mit Tapatalk
When you will put instructions for Rollback to Nougat L29C432 or to B201 L29C432 ( your room )? ThankZ
If you give the support there.. It's not my language [emoji1]
Gesendet von meinem VKY-L29 mit Tapatalk
Hi Blackball. First of all, thank you for beeing here helping us.
I have a little trouble. Of course my p10 plus is making weird stuff. I've downloaded the oreo zip file into my phone, and sent to my SD root (with es explorer pro). Booted on twrp, and launched the zip, but I get an error, zip signature failed, followed by invalid zip file format.
I am on fromfuture b201 . Shouldn't it work with this ROM?
dj_varizes said:
Hi Blackball. First of all, thank you for beeing here helping us.
I have a little trouble. Of course my p10 plus is making weird stuff. I've downloaded the oreo zip file into my phone, and sent to my SD root (with es explorer pro). Booted on twrp, and launched the zip, but I get an error, zip signature failed, followed by invalid zip file format.
I am on fromfuture b201 . Shouldn't it work with this ROM?
Click to expand...
Click to collapse
You must unzip (extract) the OREO_UPDATE ZIP TO ROOT OF SD CARD AND FIRST flash from b201 twrp the oreo_update (it is zpped in OREO_UPDATE. zip) did you read the first post with instructions?
Poslano sa mog VKY-L29 koristeći Tapatalk
Alora6501 said:
You must unzip (extract) the OREO_UPDATE ZIP TO ROOT OF SD CARD AND FIRST flash from b201 twrp the oreo_update (it is zpped in OREO_UPDATE. zip) did you read the first post with instructions?
Poslano sa mog VKY-L29 koristeći Tapatalk
Click to expand...
Click to collapse
I did, but didn't understand I had to unzip before. I will try it now. Thanks for the help mate! (getting old leads to get stupid....)
Rommco05 said:
How I can make rollback to Nougat if is possible, thx
Click to expand...
Click to collapse
Look at this thread
https://forum.xda-developers.com/showthread.php?t=3724382
Gesendet von meinem VKY-L29 mit Tapatalk
Slightly off-topic question:
I'm considering getting this phone,but,I was curious if the EMUI PC-Desktop mode (found on the Mate 10/Mate 10 Pro) is included in the Oreo update for the P10/P10 Plus ?
At the moment it's not included
Gesendet von meinem VKY-L29 mit Tapatalk
Blackball said:
At the moment it's not included
Gesendet von meinem VKY-L29 mit Tapatalk
Click to expand...
Click to collapse
Thank you for the prompt response, it's greatly appreciated.
Still interested, considering this vs the Mate 10 Pro.
TBH, I'd seldom find a real world use scenario for the Desktop Mode.
For myself, the expandable storage & front FPR/nav button trump the Desktop Mode, if forced to choose between the two,not to mention the price difference
Will likely order a P10 Plus by the end of the week/upon sale of my Sony XZP.
Once again @Blackball , thank you for the prompt response. :good:
Sent from my Sony Xperia XZ Premium using XDA Labs
I have a VKY-L29C432 with fromf b201 and when I give flash to oreo_update.zip in twrp the phone restarts.
Trimis de pe al meu VKY-L29 folosind Tapatalk
Then you did something wrong. Make a Screenshot of your folder that you have extracted
Gesendet von meinem VKY-L29 mit Tapatalk