Database Develop

Battery JVK Android OS

Hi,
I have detected the reason why the battery at JVK is always so quickly. The Android OS syndrome.
It is the CPU running at 1000Mhz permanently. Even if the phone is in standby. Otherwise, switch the MHz number in stand down even more. What can you do?

Cpu doesnt always be on 1ghz.You can see in what frequency the phone is using setcpu.

The CPU is not running at 1000MHz constantly. And if you are afraid that it is, do the following:
1. Download SetCPU from the Market.
2. Enable profiles, and set following profiles:
- Charging: min 1000, max 1000;
- Screen Off: min 100, max 200;
- Normal: min 100, max 1000.
This will also increase your battery life!
Sent from my GT-I9000 using XDA Premium App

SoD (Sleep of Death) caused by SetCPU

Im on my rom 2.3.3 rom based on XWJVB and i want to up battery life by scaling CPU on 800 Mhz on charging and 200 Mhz on screen of... but why always have SoD if i scale it into that value?
Sent from my GT-I9000 using Tapatalk

Hi, for my experience and what I've read, SetCPU isn't working on our Galaxy S. The phone already gets lower CPU values when idle. Try to find some topics on the subjects, maybe with some specific values it may be working.

Setting CPU

Is it safe to clock the galaxy ace since I set my CPU to 864mhz it's getting hot and I set the min to 200 MHz
GT-S5830 APOCALYPSE ADRENALINE

[Q] CPU frequency on Zeus 7.06

Hi guys
I recently flashed zeus v7.06 (coming from official ICS, I did all the 3 wipes but NO factory reset). The only change I made in 'zeus tweaker' was that I set min frequency to 200MHz and max Frequency to 800MHz. I monitor cpu stats via BetterBatteryStats app.
Now the only problem is that when the screen is on and I do regular stuff like writing a text message..., most of the time CPU works at the maximum frequency which is 800MHz causing battery drain very fast. I tried every governer in zeus tweaker but the same thing happens. I did no other change, no voltage tweaks, ram tweaks or I/O schedule.
Is it normal or there's sth wrong? Because I remember from older versions of zeus roms that when I set min freq to 200, then most of the time CPU used to work at min freq but now it works vice versa.
Thank you very much.

[Q] cpu frequency automatically set to 800 mhz while overclocking cpu.

Set cpu or any other cpu application automatically set my cpu at 800mhz while i set 1400mhz max. And 1200mhz min. In ondemand governor or any other governor.
When i set any criteria of frequeny in which minimum mhz is higher than 800 mhz than it comes down to 800 mhz and stays there .Why ?
I tried set cpu,no frills cpu,cpu adjuster,rom toolbox lite.one by one i tried each app but problem is same in each case :/