Related
Hello,
I have already moved to Windows 7, which is very stable and much faster then Windows Vista...
There are some problems with the Windows 7 and USPL...
Is there a configuration guide, which explains the procedure, how I can manage the USB connection problems within Windows 7.
Many Thanks
Roman
You need to update the USB drivers.
The following post will explain how. This works for Windows 7 aswell as Vista.
http://www.modaco.com/content/windo...u-on-vista-it-can-be-done-the-ultimate-guide/
One thing to note, you have to put your phone in bootloader and connect it via USB for it to show the Mobile Device - HTC USB in Device Manager.
One laptop I was on I knew I had to apply the fix on so hadn't tried without updating, and took me forever to find out why I couldn't find the driver to update.
I used a small program called "Driver Signature Enforcement Overrider 1.3b".
Its freeware for using unsigned drivers in Windows 7.
I'm using Windows 7 x64 and USPL works perfect now.
Thanks
standish said:
You need to update the USB drivers.
The following post will explain how. This works for Windows 7 aswell as Vista.
http://www.modaco.com/content/windo...u-on-vista-it-can-be-done-the-ultimate-guide/
Click to expand...
Click to collapse
Hello,
Had to upgrade my Windows 7 to build 7077 first....!
Then it worked @ 1st try... ;-)
Roman
I have problem with installing driver on Windows 7 64-bit (build 7077). I always get error: This device cannot start (Code 10). Does anyone have solution for it?
I had to get to 7077 as well, i couldnt make it start on 7057 or 7068 either.
I just solved it, but I can't explained how... I tried it again and again.. did some restart of HD and of Windows 7 and finally I was successfull . My tip is to re-connect HD on USB before installation...
I use 7077 x64 and no issues with it whatsoever. I had no issues at all with any build and actually it gets the drivers and Windows Mobile Device Center automatically for me. Check your system drivers like chipset and usb controller for updated versions maybe?
Thanks
Many thanks for the solution that you give to us.
I have been testing every release of Windows 7 since 7000 and as long as you install WMDC (Windows Mobile Device Center 6.1) and then update the HTC USB Sync driver (put your phone into bootloader and update the driver in device manager with the one from the guide in my signature) you won't have any issues flashing roms. This is for both 32 and 64-bit versions of Windows 7.
I had many difficulties to install windows 7 to my shift, maybe because of my USB stick. And then every guide was a little bit complicated - too many instructions, too many steps, too easy to make a mistake and then go back to the beginning..
Didn't want to buy an external dvd-drive either..
Anyway, all this before I found this article.
Check this out
Installing Windows 7 without using a DVD or USB via direct method - No USB stick required. No USB drive required
In this method we install Windows 7 on a clean partition like the normal DVD boot method. Only change is we don’t use a DVD drive in this guide. Please follow the below instructions carefully and don’t skip any steps to make things quickly!
1. Download the Windows 7 ISO files from Microsoft. I hope you have already downloaded one.
2. Download and install Virtual Clone Drive from http://www.slysoft.com/en/download.html
3. Firstly, go to the directory where you have saved Windows 7 ISO file. Right-click on the ISO file, select Open with and then select “Mount files with Virtual Clone Drive” to mount your ISO file.
4. Go back to My Computer (or Just Computer) and then double-click on the Virtual Clone Drive icon to start Windows 7 installation process.
Yes, you are installing Windows 7 without a DVD or USB drive!
5. Next, follow the normal Windows 7 installation procedure to finish the installation. Windows may restart during the install process. Worry not, everything will go fine.
From
http://www.intowindows.com/installing-windows-7-without-using-dvdusb-drive-method-2/
P.S Any good site to download NON-aero themes?
apoparis said:
P.S. Any good site to download free non-aero themes? Thanks in advance.
Click to expand...
Click to collapse
There already are some from microsoft availabale via the link in the personalize menu. Have you already downloaded those ?
Unfortunately those are aero themes, I'd like some NON-aero, to fit with both resolutions.
ok, now the short way to make a bootable USB Disk to install Vista/7
cmd
diskpart
list disk
select disk $ [where $ is the number of the USB Disk listed in the list disk command]
clean
create partition primary
select partition 1
active
format fs=ntfs quick label="InstallUSB"
assign
exit
exit
Copy the content of your Installation Disk on USB and boot from it, just simple as that
do this method install the new windwos over the existing windows, or on a new partition in HDD.
As far as I know, no version of windows allows installing of a new windows except from booting.
N_M_S said:
do this method install the new windwos over the existing windows, or on a new partition in HDD.
As far as I know, no version of windows allows installing of a new windows except from booting.
Click to expand...
Click to collapse
I just tried it out and it installs it over the existing running windows, doesn´t matter if it was downgraded to xp, or already upgraded to 7, it will install a new and fresh copy of Win 7 in your local drive, regardless of the existing vista recovery partion, which can be used in any time... (I hope to get ride of it once Win 7 final version comes out...)
When the installation is complete, a folder called "old windows" saves all the files from the preivous running operating system, bt since it´s over 10 GB, I suggest you erase it..
Win 7 is fantastic!! I have my shift now running both Internet Explorer 8 and Opera, Office Pro 2007, Skype, Live Messenger, Eset Smart Security 4, Adobe Reader, and more.... as smooth as butter
Great..............Shift on W7.
Please someone could tell me if the differences are big using W7 instead Vista.
So, it's a great solution to move Shift to run on W7, or not ?
I upgraded my hard drive then changed to windows 7 with a clean install. It is amazing how much better my shift runs now that it is on W7. It is really worth it to upgrade.
upgraded to windows 7 ultimate
Hi,
i upgraded to windows 7 ultimate and changed the drivers compitibility mode to windows vista service pack 1 and they all run smoothly but except the wifi and bluetooth, also the shag control doesn't run
would you please advise?
i am planning to buy the windows 7 upgrade
thanks for your help in advance
cadc82 said:
I just tried it out and it installs it over the existing running windows, doesn´t matter if it was downgraded to xp, or already upgraded to 7, it will install a new and fresh copy of Win 7 in your local drive, regardless of the existing vista recovery partion, which can be used in any time... (I hope to get ride of it once Win 7 final version comes out...)
When the installation is complete, a folder called "old windows" saves all the files from the preivous running operating system, bt since it´s over 10 GB, I suggest you erase it..
Win 7 is fantastic!! I have my shift now running both Internet Explorer 8 and Opera, Office Pro 2007, Skype, Live Messenger, Eset Smart Security 4, Adobe Reader, and more.... as smooth as butter
Click to expand...
Click to collapse
would you please help me in installing the drivers?
i have a problem with the VGA display driver (i can not increase the reslution), wifi and bluetooth.
hope to hear from you soon
Can someone pls give me the microsoft windows mobile 7 iso download link???...
I am still confused which iso file to download
abs_dear said:
Can someone pls give me the microsoft windows mobile 7 iso download link???...
I am still confused which iso file to download
Click to expand...
Click to collapse
Windows mobile 7?
Hello Friends,
I need help on how i can connect the Dell Streak 7 3.2 HoneyComb to the computer.I have a new one just opened it but when i connect it using the USB to the Laptop with windows XP SP3 proffesional i dont see any device in My computer.
Please Please help me Team how do i make d device visible in my computer i knw this is new one and wouldn't have problems !!!
Is there something i need to install in windows XP SP3 proff so that it detects the device ..Is there any related drivers can i have the link so that i can install.
THnaks in advance
p.sandeepreddy said:
Hello Friends,
I need help on how i can connect the Dell Streak 7 3.2 HoneyComb to the computer.I have a new one just opened it but when i connect it using the USB to the Laptop with windows XP SP3 proffesional i dont see any device in My computer.
Please Please help me Team how do i make d device visible in my computer i knw this is new one and wouldn't have problems !!!
Is there something i need to install in windows XP SP3 proff so that it detects the device ..Is there any related drivers can i have the link so that i can install.
THnaks in advance
Click to expand...
Click to collapse
Why don't you take the time do first do some reading and find the drivers and then second team on how to install and use this email drivers.... If I give you the links you won't learn a thing but I can tell you they are here in so many different threads started by folks like you that wanted the info spoon fed to them that it goes me a headache..... So show some initiative
Sent from my cm_tenderloin using Tapatalk 2
Reply
I have done the reading about dell streak 7 "honey comb" and the user guide and also called up Dell,but could get a solution or clarity.for windows xp professional somehow i have installed downloaded files are "Fastboot+ADB " / InstallDellMSync /R291096 / syncup ..after installing all these still i dont see the device appearing in my computer...So confused so,after all that i have asked here...Help or links appreciated as i am not able to get the neck of it Sir!
p.sandeepreddy said:
I have done the reading about dell streak 7 "honey comb" and the user guide and also called up Dell,but could get a solution or clarity.for windows xp professional somehow i have installed downloaded files are "Fastboot+ADB " / InstallDellMSync /R291096 / syncup ..after installing all these still i dont see the device appearing in my computer...So confused so,after all that i have asked here...Help or links appreciated as i am not able to get the neck of it Sir!
Click to expand...
Click to collapse
If you installed Dell Sync correctly and the Fastboot and ADB drivers correctly the your problem is driver related.... Do you not see a yellow exclamation in your device manager for you to update the driver?
You should probably be install the Android SDK with the Google USB drivers also
Sent from my cm_tenderloin using Tapatalk 2
reply
Yes i saw and yellow xlamatory in device manager..Could you Please guide me what exactly i could download or from where ..like which version Android SDK and Google USB drivers ..
I believe you are trying to connect your Streak 7 to your computer so that you can transfer musics and files onto your Streak 7, right? If that is the case, Honeycomb does not support USB as mass disk device. You need to upgrade to Win 7 or use an app from the marketplace to do this.
Windows XP does not support MTP natively, you have to do a bunch of driver crap to get it to work.
giveen said:
Windows XP does not support MTP natively, you have to do a bunch of driver crap to get it to work.
Click to expand...
Click to collapse
You need the WMP11 runtimes (as that has MTP support).
Then you need the specific mtp driver for the S7, which is included in Fastboot+ADB.zip
It's much easier just to use an app and do a wireless transfer.
All HC and newer devices only officially support MTP
(at least that's what goog wants, new devices that dont support MTP are in the minority)
I believe the WMP11 runtimes are offered via windows update, the only thing you need to specifically download are the device specific mtp drivers.
(They're not even drivers per-se, you can force install a generic mtp driver and it'll work fine, but that's besides the point)
reply
Otnos
Yes,i was trying to connect my Streak 7 to computer that has windows XP professional,so that i can transfer musics and files onto Streak 7 honeycomb 3.2.
If i upgrade to Win 7 does the device show up in my computer ?
And if you say i need to use an app from the marketplace to do this. what is the App that i need to download on device ? and even if i download it on the device does that make the device recognizable on my computer on XP ?
Please, educate me as not always i have internet connection and would like to transfer files like music and books to the DS7 from a computer thats not on internet network.
Thanks
p.sandeepreddy said:
Otnos
Yes,i was trying to connect my Streak 7 to computer that has windows XP professional,so that i can transfer musics and files onto Streak 7 honeycomb 3.2.
If i upgrade to Win 7 does the device show up in my computer ?
And if you say i need to use an app from the marketplace to do this. what is the App that i need to download on device ? and even if i download it on the device does that make the device recognizable on my computer on XP ?
Please, educate me as not always i have internet connection and would like to transfer files like music and books to the DS7 from a computer thats not on internet network.
Thanks
Click to expand...
Click to collapse
If you have Win 7, just plug the DS7 in and it will be recognized as an MTP device in Windows Explorer or the Devices and Printers folder.
Or you can use an app like Wifi File Explorer or File Expert to wirelessly transfer file to/from your computer and your DS7. You need to have a Wifi network. Consult instructions and support through these apps on how to use them.
Yes I was able to see the DS7 in my computer on windows 7,and was able to transfer musica and movies but,when i transfer books they get transferred but not visible on the device unless i open them a App Called "Quick Office" where it shows all the loaded files on DS7,any idea how to get them as different folder or see them seperately ,Also i saw the drivers.zip but did not extract it as did not feel the use of it !is there a specif use of it!
So.... I have a crappy Sony VAIO laptop and I installed windows 8 release preview on it. It worked fine for about a day then I wanted Ubuntu back so I installed the windows version thinking I would dual boot. Yeah right. Now my computer will not go into anything but the windows recovery thing. If I go to "use a different OS" I have 2 windows 8s both on the same volume (volume 3). It won't automatic repair (says that it couldn't fix my computer and I'm missing SrtTrail.txt) and it will not refresh (says that it can't refresh and no changes were made). I created recovery media from a desktop computer with windows 8 release preview and my computer doesnt even recognize the flash drive in "reset your PC". I need help as I am an android developer and I NEED Ubuntu back. Thank you.
Sent from my Galaxy Nexus using xda premium
Since this has nothing to do with mobile devices, moved to Off-Topic.
BiteBlaze said:
So.... I have a crappy Sony VAIO laptop and I installed windows 8 release preview on it. It worked fine for about a day then I wanted Ubuntu back so I installed the windows version thinking I would dual boot. Yeah right. Now my computer will not go into anything but the windows recovery thing. If I go to "use a different OS" I have 2 windows 8s both on the same volume (volume 3). It won't automatic repair (says that it couldn't fix my computer and I'm missing SrtTrail.txt) and it will not refresh (says that it can't refresh and no changes were made). I created recovery media from a desktop computer with windows 8 release preview and my computer doesnt even recognize the flash drive in "reset your PC". I need help as I am an android developer and I NEED Ubuntu back. Thank you.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Get the ubuntu disk, pop it in, boot from CD, start new install, format the whole hard drive, wait for Ubuntu to install.
jaszek said:
Get the ubuntu disk, pop it in, boot from CD, start new install, format the whole hard drive, wait for Ubuntu to install.
Click to expand...
Click to collapse
Back up info first though...
Sent from my Galaxy Nexus using Tapatalk 2
The problem with windows8 is it installs its on bootloader and once you delete windows 8 from that partition the bootloader gets confused and still thinks windows 8 is the primary os.
You want to download easyBCD to delete windows 8 from the boot menu this will allow you to select the os originally installed.
Hey,
i read the thread in the Hacking Section and because iam a new member here i cant post in this thread.
My problem is that i tried to unlock my Phone (Lumia 820) via this Tool (aiyingyong the chinese one) and i get an error after downloading an archive or something like that. See the picture.
I have Win 8.1 64bit, Visual Studio 2012 Update 4 but no WP8 Emulator. But everything else is working like WP Power Tools, XAP Deployer and Unlock and Locking the Phone for Development.
I tried to change the name of the Phone and started the chinese app as Admin.
Just this Tool wont work. I just want the 10 unsigned apps instead of the 2 that i have right now with my free Dev Account.
Can you please help me?
Hey bro...i am too facing this error..."Unable to open archive".
And i have posted in that thread on page 9.
Check my post and SS....
Hoping someone help me there...
Amirphp said:
Hey bro...i am too facing this error..."Unable to open archive".
And i have posted in that thread on page 9.
Check my post and SS....
Hoping someone help me there...
Click to expand...
Click to collapse
Thanks i will check it later
Why don`t you guys try the "Dreamspark/Intuit" trick and gain the 10 apps limit?I know its a little frustrating with all those translations but at the end it`s worth to have a try.
Thanks CV bro for reply....
But...Now My problem solved and my phone is unlocked for 10 app....
@thread OP....check that thread at that page 10 and ....And follow the steps....thats work perfectly.
Same problem but not getting fixed
I tried it on my Lumia 520 and I too have this problem. I tried the ways mentioned by the member in 10th page of the TUT on doing this but failed. It justs downloads something everytime when i connect phone ( a 10 MB file which i see in the directory of the software). I tried deleting the device drivers and installed it again, failed. I renamed the phone to Lumia 920, failed. I installed the softwares from various sources including the attachment provided by the member who had given some steps for this problem but failed. Can someone help out me
Have u installed wp8 sdk?
and what's the status of Windows developer registration tool...when u connect your lumia 520 to pc...if u already have installed sdk?
Amirphp said:
Have u installed wp8 sdk?
and what's the status of Windows developer registration tool...when u connect your lumia 520 to pc...if u already have installed sdk?
Click to expand...
Click to collapse
I have SDK and my phone was registered but now unregistered it and it detects my phone.
gouthamhere said:
I have SDK and my phone was registered but now unregistered it and it detects my phone.
Click to expand...
Click to collapse
1.Uninstall your old chinies software from pc....and reboot
2.Download and install it:
http://forum.xda-developers.com/attachment.php?attachmentid=2546188&d=1390981688
Dont update if asked for update.
3. Reboot your mobile and off data connection from setting > Mobile Networks.
4. Now connect with PC (without internet) and rename mobile from My Computer to Nokia Lumia 920.
Before connecting make sure both PC and mobile have same date/time.
5. Now chinies tool should detect your phone.
6. After detecting if u did not getting blue button then....On Data connection in Mobile and Pc both.
7. And disconnect USB and Connect again...and wait for a minute.
Then Unlock.
Same i did...and worked.
Amirphp said:
1.Uninstall your old chinies software from pc....and reboot
2.Download and install it:
http://forum.xda-developers.com/attachment.php?attachmentid=2546188&d=1390981688
Dont update if asked for update.
3. Reboot your mobile and off data connection from setting > Mobile Networks.
4. Now connect with PC (without internet) and rename mobile from My Computer to Nokia Lumia 920.
Before connecting make sure both PC and mobile have same date/time.
5. Now chinies tool should detect your phone.
6. After detecting if u did not getting blue button then....On Data connection in Mobile and Pc both.
7. And disconnect USB and Connect again...and wait for a minute.
Then Unlock.
Same i did...and worked.
Click to expand...
Click to collapse
I did everything until Step 4. Connected the phone to the PC without internet on both, and this error happens http://snag.gy/SYnU2.jpg and if i try again with internet on in PC, it downloads something ( http://snag.gy/MGPVd.jpg ) inside the Chinese software and the Launcher Error ( http://snag.gy/ps4P7.jpg ) shows up.
I tried it many times and tried with names Lumia 520, 920 and 1520 but nothing works.
I think its some problem with my drivers though my pc detects it and i can even register and unregister it through Developer Tool provided by Microsoft.
gouthamhere said:
http://snag.gy/MGPVd.jpg.
Click to expand...
Click to collapse
Previously that was happened with me too....
But after new version installed from developer thread...worked that...
And its detects my phone instantly as i connect...did not tried to upgrade.
* I did one more thing on My PC...when i was getting this http://snag.gy/MGPVd.jpg error.
Goto Control pannel > Region and Language > Administrative > Change System Locale > Chinies(Tradistiona, Taiwan).
Apply And Reboot....
Then Uninstall Chinies tool and Repeat the same process what i have mentioned in previous post....thats it.
Hello, sorry for bad english language I'm italian and I'm 14.
You have to click CTRL+R, write "intl.cpl", go to "Administrative" and click "Change System Locale", select "Chinese, Simplified, China", and once applied click Restart now.
After reboot it should work, if you can't do it here's a video that explains everything. (It's in italian)
ww w.youtube . com /watch? v=DWTyIaTMbLY&app=desktop
Amirphp said:
1.Uninstall your old chinies software from pc....and reboot
2.Download and install it:
http://forum.xda-developers.com/attachment.php?attachmentid=2546188&d=1390981688
Dont update if asked for update.
3. Reboot your mobile and off data connection from setting > Mobile Networks.
4. Now connect with PC (without internet) and rename mobile from My Computer to Nokia Lumia 920.
Before connecting make sure both PC and mobile have same date/time.
5. Now chinies tool should detect your phone.
6. After detecting if u did not getting blue button then....On Data connection in Mobile and Pc both.
7. And disconnect USB and Connect again...and wait for a minute.
Then Unlock.
Same i did...and worked.
I did what u said, after clicking the blue botton,
The gray phone know has an open lock but doesn't happened
anything.
Click to expand...
Click to collapse