Microsoft Wireless Display Adapter - Motorola Atrix HD

Hi there
I did a couple searches and found nothing in Atrix HD thread regarding this. So I'd like to ask if anyone has tried the Microsoft Wireless display adapter on this phone and how good/bad is it.
That is a dongle that plugs to your TV and that lets you mirror your phone screen using miracast protocol (through wi-fi direct I believe). Apparently, unlike Chromecast, you don't have to have compatible streaming apps and just use it as if you had the hdmi plugged into the tv.
Anyhow, any feedback would be appreciated.
Thanks

Related

[SOLVED] MHL cable requires HDCP, any way to disable?

Hi all.
I have used a MHL cable with my Xperia T ever since I got it.
With the original firmware, it would work fine with a basic HDMI cable and pretty much any TV with a HDMI input.
I've just been on holiday for 2 wks and discovered on day 2 that the latest firmware had a different MHL driver that requires HDCP. Apart from needing a newer spec cable, I also need a TV which supports HDCP - which the one at the holiday home didn't. My 5 year old was not impressed with not being able to watch any of his films for 2 wks!
So, anyone know of a way of getting back to a state where MHL is more user friendly? (Without having to rip back to earlier firmware.)
Seems mad Sony would force the feature since a lot of TVs don't support HDCP.
After no responses and my own continuing investigations I've solved my own problem and thought I'd post the outcome in case anybody else has a similar issue...
The MHL functionality works fine if both the TV and the cable are pre-HDCP. The problem I must've actually had was that the TV was HDCP compliant but my cable isn't HDMI v1.3+ (so didn't support HDCP.)
Basically, the solution to the problem I was experiencing is to use a HDCP compliant cable in all cases. That way it'll work on HDCP compliant and older spec TVs regardless. My confusion was caused by the message the phone prompted, which said the TV had to support HDCP - when in fact it did and the cable was the problem!

Chromecast causing audio dropouts on receiver

Hi folks, I have my chromecast connected directly to my Denon avr 3310 and powered from the USB port on my TV. Chromecast is working as expected. I get dolby digital plus with no problems and great hd pictures from Netflix. Trouble happens when I switch back to my satellite box. That's connected to my TV via hdmi and receiver via optical. Since adding chromecast I get audio dropouts when watching satellite. How do I know it's chromecast? When I remove the USB cable powering the chromecast from the TV all audio issues dissappear. Anyone have similar issues? Cheers mick
I would do what was suggested and move the usb to maybe a wall adapter for power for troubleshooting. Also make sure that somehow your optical input is not assigned to the same source as your chromecast hdmi input and double check all your input assignments on the Denon.
007shark said:
I would do what was suggested and move the usb to maybe a wall adapter for power for troubleshooting. Also make sure that somehow your optical input is not assigned to the same source as your chromecast hdmi input and double check all your input assignments on the Denon.
Click to expand...
Click to collapse
Tried everything but in the end changed my satellite receiver to send audio via hdmi to the reciever and everything is playing nice now
micks_address said:
Hi folks, I have my chromecast connected directly to my Denon avr 3310 and powered from the USB port on my TV. Chromecast is working as expected. I get dolby digital plus with no problems and great hd pictures from Netflix. Trouble happens when I switch back to my satellite box. That's connected to my TV via hdmi and receiver via optical. Since adding chromecast I get audio dropouts when watching satellite. How do I know it's chromecast? When I remove the USB cable powering the chromecast from the TV all audio issues dissappear. Anyone have similar issues? Cheers mick
Click to expand...
Click to collapse
Same here with a Denon 790 and analog sources. The Chromecast is plugged on back of the receiver inside a bookshelf nook, so disconnecting it is impractical.
The workaround is to drill down the menu through Input Assign > [HDMI] for the port used by Chromecast > set to "None". When using the Chromecast again, reverse the procedure and reassociate the port. Don't forget which port number holds the Chromecast.
It's inconvenient and my wife explicitly Does Not Like It, but the dropouts stop when you disassociate the port. You eventually memorize the remote key sequence without needing the onscreen menu.
Hope this helps, even after 3+ years.

Screen mirroring / MHL etc

Hi,
Little bit confused, so hopefully somebody can clear this up for me.
I have the Edge and a Sony Bravia TV. I can (albeit quite clumsily) stream photos/videos/audio from my device via the quick connect option but Is there anyway to mirror my phone screen onto the TV? My friend had the S5 and he just used an MHL cable. I've seen conflicting reports but is it right that there is no MHL support for the S6? There are plenty of eBay listings stating that they are selling cables for the S6.
Would Chromecast let me mirror my device and all the apps?
Thanks

Chromecast 3 (2018)

Hi everyone!
Does anyone knows a method (either hardware or software) to force the Chromecast to output at 720p?
Background:
I have a DVI monitor and I used a simple HDMI to DVI adapter to plug my laptop in it.
My laptop died and I decided to use a Chromecast and my phone as a replacement.
After the Chromecast arrived and I plugged it in, I turned on screen mirror and hooked my kb/m to the phone and everything, only to realize that the sound was also being streamed to the Chromecast.
Needless to say that my monitor doesn't have audio output.
So I got one of those HDMI audio diverter to draw the audio and feed it to my audio system, so far so good.
I used my laptop to game was well, so after starting some withdraw from games, I decided to grab my PS2 console and got on of those PS2 to HDMI dongles and play some old-school games, then I started facing an issue: swapping cables.
To fix that I got one of those 3 port HDMI hubs and plugged both devices to it.
However the monitor is 720p, the HDMI audio diverter knows that and replicates this information to it's input port which makes the Chromecast display in 720p.
But the hub does not, it report it's 1080p making the Chromecast send 1080p video signal and the display only shows a black screen because of it not knowing how to deal with that.
So if there's a way to force the Chromecast to display in 720p it would be my salvation.
So if anyone out there knows any possible solution, please, I would be really grateful.
Thanks everyone!

Questions re the docking station

Hi all
I've had the magic 3 for a few weeks now and am loving it.
One thing I wonder is if I should get the docking station. When if using an ethernet with the docking station will this help with screen mirroring/casting to my TV which is also connected via ethernet to my router?
Over wifi it can sometimes be a bit laggy so wondered if this would help.
Also if it's connected via ethernet I guess I should also be able to access files on my phone via my TV also?
Many thanks
Jamie

Categories

Resources