Related
Hi people, I have a big problem with my friend's Razr i, I was trying to root it, but i didn't want to unlock my bootloader so tried several methods but not a single one worked, So i tried the one for unlocked bootloaders and ended up bricking my device, Now It's stuck on fastboot mode.
I've tried to flash some brazilian firmwares via RSD lite, but it get stuck on "6/9 flashing radio_signed" SO PLEASE SOMEONE GUIDE ME TO THE SOLUTION WHAT AM I DOING WRONG?
PS: Also tried to flash an argentinian Firmware but it didn't even let me start flashing bringing the error "Faled flashing process. Unknown fastboot command. (getvar)"
PS2: Also tried the eternityprj Alternate method without RSD, and it gets stuck on flashing recovery... and it also prompts some errors you can see in the attached file.
HELP ME PLEASE AS I SAID THE RAZR IS A FRIEND'S PHONE NOT MINE, I NEED TO SAVE IT.
Vaizen said:
Hi people, I have a big problem with my friend's Razr i, I was trying to root it, but i didn't want to unlock my bootloader so tried several methods but not a single one worked, So i tried the one for unlocked bootloaders and ended up bricking my device, Now It's stuck on fastboot mode.
I've tried to flash some brazilian firmwares via RSD lite, but it get stuck on "6/9 flashing radio_signed" SO PLEASE SOMEONE GUIDE ME TO THE SOLUTION WHAT AM I DOING WRONG?
PS: Also tried to flash an argentinian Firmware but it didn't even let me start flashing bringing the error "Faled flashing process. Unknown fastboot command. (getvar)"
PS2: Also tried the eternityprj Alternate method without RSD, and it gets stuck on flashing recovery... and it also prompts some errors you can see in the attached file.
HELP ME PLEASE AS I SAID THE RAZR IS A FRIEND'S PHONE NOT MINE, I NEED TO SAVE IT.
Click to expand...
Click to collapse
your secure level was to high for a non bootloader method and if you done a method with a unlocked bootloader and your bootloader was locked thats bad.
unlock your bootloader >>WARRANTY VOID<< install cwm and use any backup. or flash the 39 gb fw but i think you have yet to unlokc the bootloader to safe it.. and be patient dont try to much stuff if your battery goes low you need a factory adapter or something like this to charge ur razr i if the battery is down.
regards hope you get it waorking again
I solved my problem this way
Vaizen said:
Hi people, I have a big problem with my friend's Razr i, I was trying to root it, but i didn't want to unlock my bootloader so tried several methods but not a single one worked, So i tried the one for unlocked bootloaders and ended up bricking my device, Now It's stuck on fastboot mode.
I've tried to flash some brazilian firmwares via RSD lite, but it get stuck on "6/9 flashing radio_signed" SO PLEASE SOMEONE GUIDE ME TO THE SOLUTION WHAT AM I DOING WRONG?
PS: Also tried to flash an argentinian Firmware but it didn't even let me start flashing bringing the error "Faled flashing process. Unknown fastboot command. (getvar)"
PS2: Also tried the eternityprj Alternate method without RSD, and it gets stuck on flashing recovery... and it also prompts some errors you can see in the attached file.
HELP ME PLEASE AS I SAID THE RAZR IS A FRIEND'S PHONE NOT MINE, I NEED TO SAVE IT.
Click to expand...
Click to collapse
Hello good morning
I brick 2 phones trying to get one of them and in the process did fail at 2, how the recovery?
1. - Use RSD Lite version 6.1.4
2. - Use 1 extra phone (htc wildfire root and backup CWMR in case of failure)
3. - Use a GB retail rom (CFC_8.7.1I-110_IFW-39_S7_UCASMI01E1017.0R_USASMIICSRTGB_P042_A005_S1FF_fb.xml)
4. - The phone to unbrick, put fastboot mode, switching on via the power button and vol (-) until the fastboot mode screen read "fastboot reason:" if it does not, re-try until there is
5. should not say "fastboot reason: flash failure, or anything else xxxxxx xxxx xxxxx ............"
6. - Boot rsd lite 6.1.4, select retail rom, and indicate that only "unzip" connects your motorola razr I, and it connects back to the other phone (in my case htc wildfire), which has a debug mode enabled.
7. - Note, that in the window of the Rsd Lite in row 1, the Razr I phone is detected, then you start flashing in RSD Lite 6.1.4, see screenshot of your razr I to see that data is being sent, (the other phone should not be affected and only serves as a decoy to usb drivers, Rsd lite at least do not damage to my phone)
8. - Remember flashing erase the card was in your internal Razr I therefore will lose programs, photos or music you had or downloaded to the SD or internal virtual
9. - Flashing can stop and have to do everything again, but remember that no fastboot mode screen should read:
"fastboot reason: flash failure or otherwise else xxxxxx xxxxxxx ......." must be clean that is just:
"fastboot reason: "
luck : Good:
Warning, do not take responsibility for any damage to your cell involved in the process, ......... the lure of the phone can be found on youtube and just suits the way because of my need to get my phone ........ in no way am programmer or software developer, for which only comment what turned out ok to me
excuse my bad English
jacbarahona72 said:
Hello good morning
I brick 2 phones trying to get one of them and in the process did fail at 2, how the recovery?
1. - Use RSD Lite version 6.1.4
2. - Use 1 extra phone (htc wildfire root and backup CWMR in case of failure)
3. - Use a GB retail rom (CFC_8.7.1I-110_IFW-39_S7_UCASMI01E1017.0R_USASMIICSRTGB_P042_A005_S1FF_fb.xml)
4. - The phone to unbrick, put fastboot mode, switching on via the power button and vol (-) until the fastboot mode screen read "fastboot reason:" if it does not, re-try until there is
5. should not say "fastboot reason: flash failure, or anything else xxxxxx xxxx xxxxx ............"
6. - Boot rsd lite 6.1.4, select retail rom, and indicate that only "unzip" connects your motorola razr I, and it connects back to the other phone (in my case htc wildfire), which has a debug mode enabled.
7. - Note, that in the window of the Rsd Lite in row 1, the Razr I phone is detected, then you start flashing in RSD Lite 6.1.4, see screenshot of your razr I to see that data is being sent, (the other phone should not be affected and only serves as a decoy to usb drivers, Rsd lite at least do not damage to my phone)
8. - Remember flashing erase the card was in your internal Razr I therefore will lose programs, photos or music you had or downloaded to the SD or internal virtual
9. - Flashing can stop and have to do everything again, but remember that no fastboot mode screen should read:
"fastboot reason: flash failure or otherwise cuarquier xxxxxx xxxxxxx ......." must be clean that is just:
"fastboot reason: "
luck : Good:
Warning, do not take responsibility for any damage to your cell involved in the process, ......... the lure of the phone can be found on youtube and just suits the way because of my need to get my phone ........ in no way am programmer or software developer, for which only comment what turned out ok to me
excuse my bad English
Click to expand...
Click to collapse
Could PM Me with the instructions in spanish, there are some things that i do not understand in your english
Tried to use your method but RSD lite got stuck on "4/11 erase userdata" and the phone says "program dummy sp block for userdata" I don't thin I understood well the part of the second phone, does it have to be on, i mean normal on, or does it have to be in flashmode aswell?
Well do not think that this thread is one among others. It's my experience when i messed up with my Razri. I wish I had this before, so I'm sharing it with you !
Every has his experience and a way to do it, so this is mine
First I searched everywhere, as you already did, the technique is globally the same but one important thing was missing and I had to get my Razri ON, it's an "Intel" !
I tried this app to install the needed drivers and to flash firmware, and I tried also this
Just let me explain what i had before the "softbrick" just to assure you that your Razri is not dead and it's up to you to bring it up from the dead and you can do that
I softbricked it by rooting my JB android with ICS, I messed up, in you case might be different but you are here cause we all had the same problem
Well, if your Razri Motorola XT890 cannot boot (or keeps rebooting with no end), charging the battery is [im]possible. Below is a quick how-to
RSD Lite detects the Razri as a "MEDFIELD" device. You can use RSD Lite to flash your phone whith a new Android Image [JB here, for "JB 4.1.2" I choose "CFC_9.8.2I-50_SMI-26_S7_USASMIJBRTEU.xml.zip"] but this is doable only after getting to the fastboot menu
1. Install EXE drivers for the "MEDFIELD" device
2. Run BAT file and follow the instructions inside
3. You might restart you Razri
You need to use the wright ifwi & dnx file, so I included those for JB (and not for ICS and if you did you will get "Service code corrupt" error but don't worry you have just to get the good version of ifwi&dnx for your android version)
Just to say, for everyone who has this trouble, and thinks that his Razri is dead, good new It is not, but remember that to make this work that fastboot menu is in there, somewhere just use the right combination, no matter what you have on the screen (Bootloader Unlocked screen or nothing at all just a black screen)
This is a little How-To:
Power botton+Volume Down botton at the same time
Wait until the screen flashes or the green led light to flash the immediately release the Power button while keeping the Volume down pushed (do not release ever) until the fastboot menu appears
Good Luck
service required code corrupt
DoxyMarket said:
Well do not think that this thread is one among others. It's my experience when i messed up with my Razri. I wish I had this before, so I'm sharing it with you !
Every has his experience and a way to do it, so this is mine
First I searched everywhere, as you already did, the technique is globally the same but one important thing was missing and I had to get my Razri ON, it's an "Intel" !
I tried this app to install the needed drivers and to flash firmware, and I tried also this
Just let me explain what i had before the "softbrick" just to assure you that your Razri is not dead and it's up to you to bring it up from the dead and you can do that
I softbricked it by rooting my JB android with ICS, I messed up, in you case might be different but you are here cause we all had the same problem
Well, if your Razri Motorola XT890 cannot boot (or keeps rebooting with no end), charging the battery is [im]possible. Below is a quick how-to
RSD Lite detects the Razri as a "MEDFIELD" device. You can use RSD Lite to flash your phone whith a new Android Image [JB here, for "JB 4.1.2" I choose "CFC_9.8.2I-50_SMI-26_S7_USASMIJBRTEU.xml.zip"] but this is doable only after getting to the fastboot menu
1. Install EXE drivers for the "MEDFIELD" device
2. Run BAT file and follow the instructions inside
3. You might restart you Razri
You need to use the wright ifwi & dnx file, so I included those for JB (and not for ICS and if you did you will get "Service code corrupt" error but don't worry you have just to get the good version of ifwi&dnx for your android version)
Just to say, for everyone who has this trouble, and thinks that his Razri is dead, good new It is not, but remember that to make this work that fastboot menu is in there, somewhere just use the right combination, no matter what you have on the screen (Bootloader Unlocked screen or nothing at all just a black screen)
This is a little How-To:
Power botton+Volume Down botton at the same time
Wait until the screen flashes or the green led light to flash the immediately release the Power button while keeping the Volume down pushed (do not release ever) until the fastboot menu appears
Good Luck
Click to expand...
Click to collapse
hello good afternoon,
Could you tell me if it corrects this type of unbrick?
service required code corrupt. appears on the black screen.
already thanks.
DoxyMarket said:
Well do not think that this thread is one among others. It's my experience when i messed up with my Razri. I wish I had this before, so I'm sharing it with you !
Every has his experience and a way to do it, so this is mine
First I searched everywhere, as you already did, the technique is globally the same but one important thing was missing and I had to get my Razri ON, it's an "Intel" !
I tried this app to install the needed drivers and to flash firmware, and I tried also this
Just let me explain what i had before the "softbrick" just to assure you that your Razri is not dead and it's up to you to bring it up from the dead and you can do that
I softbricked it by rooting my JB android with ICS, I messed up, in you case might be different but you are here cause we all had the same problem
Well, if your Razri Motorola XT890 cannot boot (or keeps rebooting with no end), charging the battery is [im]possible. Below is a quick how-to
RSD Lite detects the Razri as a "MEDFIELD" device. You can use RSD Lite to flash your phone whith a new Android Image [JB here, for "JB 4.1.2" I choose "CFC_9.8.2I-50_SMI-26_S7_USASMIJBRTEU.xml.zip"] but this is doable only after getting to the fastboot menu
1. Install EXE drivers for the "MEDFIELD" device
2. Run BAT file and follow the instructions inside
3. You might restart you Razri
You need to use the wright ifwi & dnx file, so I included those for JB (and not for ICS and if you did you will get "Service code corrupt" error but don't worry you have just to get the good version of ifwi&dnx for your android version)
Just to say, for everyone who has this trouble, and thinks that his Razri is dead, good new It is not, but remember that to make this work that fastboot menu is in there, somewhere just use the right combination, no matter what you have on the screen (Bootloader Unlocked screen or nothing at all just a black screen)
This is a little How-To:
Power botton+Volume Down botton at the same time
Wait until the screen flashes or the green led light to flash the immediately release the Power button while keeping the Volume down pushed (do not release ever) until the fastboot menu appears
Good Luck
Click to expand...
Click to collapse
Hi
do you have any solution for "service required code corrupt" plz
thanx
If you've tried to root your JB Motorola RAZR I with the ICS root-method don't worry. The ICS-root-method flash a unsave boot image, which is for the ICS firmware. That's why the RAZR with JB have problems to boot.
To make everything working again, you need:
- RAZR I PC driver
- fastboot (PC program)
- the right boot image for your JB version. (e.g. retail.EU) (download the right version from firmware-thread and search for a file "boot.img" )
If you have everything prepared do the following things:
- start your RAZR I (make sure, that it doesn't boot into bootloop)
- connect your RAZR I to your PC
- on PC start a command line/terminal and (for windows users) navigate in the directory with the fastboot.exe and make sure that the boot.img file is in the same directory
(Linux users navigate into the directory with the boot.img)
- type: fastboot flash boot boot.img
- wait until it's done
- reboot the device by typing: fastboot reboot
And that's it. Your personal data won't be touched, everything is like it was before.
Gesendet von meinem XT890 mit Tapatalk 4
Try this
sysmanin said:
Hi
do you have any solution for "service required code corrupt" plz
thanx
Click to expand...
Click to collapse
It's probably beacause tou updated your Formware with the wrong version, try this out:
You need to use the wright ifwi & dnx file, so I included those for JB (and not for ICS and if you did you will get "Service code corrupt" error but don't worry you have just to get the good version of ifwi&dnx for your android version) ==> You can get it from de XML file form sbf.droid-developers.org/smi/list.php it depends in which android version you were befor, in my case i took "CFC_9.8.2I-50_SMI-26_S7_USASMIJBRTEU.xml.zip"
So you have to Unzip it and there you'll find the ifwi & dnx files
Nice
cupioscire said:
If you've tried to root your JB Motorola RAZR I with the ICS root-method don't worry. The ICS-root-method flash a unsave boot image, which is for the ICS firmware. That's why the RAZR with JB have problems to boot.
To make everything working again, you need:
- RAZR I PC driver
- fastboot (PC program)
- the right boot image for your JB version. (e.g. retail.EU) (download the right version from firmware-thread and search for a file "boot.img" )
If you have everything prepared do the following things:
- start your RAZR I (make sure, that it doesn't boot into bootloop)
- connect your RAZR I to your PC
- on PC start a command line/terminal and (for windows users) navigate in the directory with the fastboot.exe and make sure that the boot.img file is in the same directory
(Linux users navigate into the directory with the boot.img)
- type: fastboot flash boot boot.img
- wait until it's done
- reboot the device by typing: fastboot reboot
And that's it. Your personal data won't be touched, everything is like it was before.
Gesendet von meinem XT890 mit Tapatalk 4
Click to expand...
Click to collapse
Worth testing. Very useful for people having the issue
Hello everyone,my phone had bricked;
I was on jelly bean 4.1.2 , Systemversion : 91.2.26001.XT890.Retail.en.EU ( Firmwareupgrade)
my question is ,using this method wich ifwi & dnx file could i choose ?
Thanks in advance
DoxyMarket said:
Well do not think that this thread is one among others. It's my experience when i messed up with my Razri. I wish I had this before, so I'm sharing it with you !
Every has his experience and a way to do it, so this is mine
First I searched everywhere, as you already did, the technique is globally the same but one important thing was missing and I had to get my Razri ON, it's an "Intel" !
I tried this app to install the needed drivers and to flash firmware, and I tried also this
Just let me explain what i had before the "softbrick" just to assure you that your Razri is not dead and it's up to you to bring it up from the dead and you can do that
I softbricked it by rooting my JB android with ICS, I messed up, in you case might be different but you are here cause we all had the same problem
Well, if your Razri Motorola XT890 cannot boot (or keeps rebooting with no end), charging the battery is [im]possible. Below is a quick how-to
RSD Lite detects the Razri as a "MEDFIELD" device. You can use RSD Lite to flash your phone whith a new Android Image [JB here, for "JB 4.1.2" I choose "CFC_9.8.2I-50_SMI-26_S7_USASMIJBRTEU.xml.zip"] but this is doable only after getting to the fastboot menu
1. Install EXE drivers for the "MEDFIELD" device
2. Run BAT file and follow the instructions inside
3. You might restart you Razri
You need to use the wright ifwi & dnx file, so I included those for JB (and not for ICS and if you did you will get "Service code corrupt" error but don't worry you have just to get the good version of ifwi&dnx for your android version)
Just to say, for everyone who has this trouble, and thinks that his Razri is dead, good new It is not, but remember that to make this work that fastboot menu is in there, somewhere just use the right combination, no matter what you have on the screen (Bootloader Unlocked screen or nothing at all just a black screen)
This is a little How-To:
Power botton+Volume Down botton at the same time
Wait until the screen flashes or the green led light to flash the immediately release the Power button while keeping the Volume down pushed (do not release ever) until the fastboot menu appears
Good Luck
Click to expand...
Click to collapse
Hi! i have a chance to revive my razr i?
HI guys! I have a problem.
i have downgraded with this rom:http://forum.xda-developers.com/showthread.php?t=2294653
and after i tried to flash two rom with rsd lite:
CFC_signed_customer_8.7.1I-110_IFW-31_RTGB.xml
CFC_8.7.1I-110_IFW-39_S7_UCASMI01E1017.0R_USASMIICSRTGB_P042_A005_S1F F_fb.xml
now the phone is locked , in the screen is write: service required code corrupt
and the green led .. can help me please?
It will work!!... keep trying
peter971215 said:
Hi! i have a chance to revive my razr i?
HI guys! I have a problem.
i have downgraded with this rom:http://forum.xda-developers.com/showthread.php?t=2294653
and after i tried to flash two rom with rsd lite:
CFC_signed_customer_8.7.1I-110_IFW-31_RTGB.xml
CFC_8.7.1I-110_IFW-39_S7_UCASMI01E1017.0R_USASMIICSRTGB_P042_A005_S1F F_fb.xml
now the phone is locked , in the screen is write: service required code corrupt
and the green led .. can help me please?
Click to expand...
Click to collapse
Check this for your problem http://forum.xda-developers.com/showthread.php?t=2134391
You must use the boot.img for you Android version (boot.img isn't the same for ICS, JB or GB)
DoxyMarket said:
Check this for your problem http://forum.xda-developers.com/showthread.php?t=2134391
You must use the boot.img for you Android version (boot.img isn't the same for ICS, JB or GB)
Click to expand...
Click to collapse
i can't get fastboot, the phone go on "service required code corrupt" screen with the green led on and nothing..
Try again
peter971215 said:
i can't get fastboot, the phone go on "service required code corrupt" screen with the green led on and nothing..
Click to expand...
Click to collapse
This would help http://forum.xda-developers.com/showthread.php?t=2220242
DoxyMarket said:
This would help http://forum.xda-developers.com/showthread.php?t=2220242
Click to expand...
Click to collapse
Nothing... the phone show Only the green led and nothing.....
Again
peter971215 said:
Nothing... the phone show Only the green led and nothing.....
Click to expand...
Click to collapse
Charge the phone
And try to get to Fastboot menu
help
Hello!
Pozhausta tell where to get the files (ifwi and dnx) of this firmware (CFC_8.7.1I-110_IFW-39_S7_UCASMI01E1017.0R_USASMIICSRTGB_P042_A005_S1F F) and then archive them in there?
You simply saved my life!
I did the whole process, but now i'm stuck on (flash boot "boot_signed") in RSD, any ideas?
renatotec said:
I did the whole process, but now i'm stuck on (flash boot "boot_signed") in RSD, any ideas?
Click to expand...
Click to collapse
You probably did not use the right image for you phone
peter971215 said:
Nothing... the phone show Only the green led and nothing.....
Click to expand...
Click to collapse
Have you already found a solution mate ?
GRACIAS!!!
Instalé una ROM brasilera porque se había brickeado, era JB, luego instalé la ICS y quedo muerto, encontre tu post primero y funcionó perfecto, mil gracias!!!!
Motorola XT890 Razr i
Hi, I tried to follow your instructions but so far my cell phone is still death. when I run the bat file I got this error message. libusB0.dll not found. also I don't know how RDS lite tools detects my cel. it is not working as the same manner as you showed us. can you help me to find a way to unbrick my cell phone.
thanks
Hi, my best friend she had a HD phone, one day got stuck into the M logo, the only thing I can do is get into the fastboot, no recovery no nothing.. So i try to reinstall the rom, have download several tools but i cant do anything, after several intents to install roms i hace in AP fastboot flash mode, device is unlocked status code 1fastbookt Reason sticky bit factoy_fastboot. for a 2nd time but i can install roms, I dont know if phone bootloader unlock and cant check... I dont know if phone is usb debugging cause it wont load the system. I dont see any internal files from phone I also try rsd lite, but the same it says that it start doing the process but nothing else happen.. any ideas on how to get a rom install there..
thanks
SAME thing..
Please do help us...No recovery...No debugging...stuck at logo..!!
If you don't have an unlocked bootloader, I don't think you can use Myth or RSD to flash an ICS rom over a JB rom.
Did you load the latest Motorola USB drivers? When you connect the phone, run adb to list the devices. Does your phone appear?
not for me doesnt show any devices... and while trying to do other commands always get stuck ad *daemond started succesfully* but doesnt do anything.. also when trying to use motorola device manager it says it will update and never connect to server and close the app.
if i do fastboot commands like reboot-loader it does work it reboots the phone, but if i try to flash something doesnt it doesnt do anything.. i try using mfastboot also and the same happen.
Is there a way to flash a rom or something so i can fix this phone or it is dead?
On the Fastboot screen, if it says UNLOCKED in capitals next to "Device Status:" , then this problem is easily fixable.
Download RSD Lite from here: http://forum.xda-developers.com/showthread.php?t=2231249
Download Motorola Stock Firmwares:
Stock Jellybean for AT&T: http://sbfdownload.droid-developers...MB886_NII_TA-2-16-release-keys-NII-MX.xml.zip
Stock Jellybean for Bell Canada: http://sbfdownload.droid-developers...FFW-11-4-release-keys-BellMobility-CA.xml.zip
Open up your zip file and replace the .xml with the new XML you will download from this link: https://www.box.com/s/num1eshkf0c2or2h4160 You really can't forget to do this!
Launch RSD, connect device to PC, make sure RSD recognizes it. Navigate to your firmware file, select it, and press the start button. Sit back, relax, and let it do its work. It will take around 5-10 minutes. Do not unplug the cable, and do not attempt if you are in a situation in which you think you may lose power (especially if running from a desktop PC).
If RSD Lite won't work, then this thread will show you how to manually flash your stock firmware: http://forum.xda-developers.com/showpost.php?p=40929335
Basically, you repeat all the instructions I just gave you and then manually input some lines in Command Prompt.
My Lenovo K3 note bricked and now it boots up to spash logo and says dl image error or something. Downloaded the stock rom and tried the spflash tool but it doesnt seems to work. Please help.
e
Download the rom and tool from here- https://www.youtube.com/watch?v=mzN1q0h_YKM&ab_channel=Techjunkie
Hey,
I just uploaded BAD stuff from a BAD folder ...
preloader
ik
logo
secro
system
userdata
No life whatsoever. Tried as I realized after flash is done that I did a big fail to go into recovery (vol + & - & power) but nothing.
Even SPFlashtool is not seeing the phone nor adb.
Please help me unbricking this brand new phone.
/I wanted to make it full Hungarian language.../
I did the same. I tried to install another rom the tool and flash my phone died.
I did the firmware backup and now I am unable to restore the file Scatter.bin by Droid Tools.
I must have firmware.bat file but it was excluded.
someone could help me with this file. if there is a site to download and there is no way to reverse this? Please help me solve. Thank you
Do this
First Sorry for my Bad English
Try to do these steps:
Install all the drivers (including lephone and others)
Open Device Manager on Windows PC
Now plug in your SWITCHED OFF
And notice the hardaware changes
If you find a hardware named "MTK 675XXX Preloader" or something like that, then your mobile can be easily unbricked
if you notice a small triangle under it then the preloader drivers might not be installed
just click on it (be fast because it will only stay for a 10 seconds or less)
and click "Update Driver"
Now, Try to flash using SPF tools
If the above method dosent work then try to boot into bootloader. if not able, then YES, YOU HAVE HARD BRICKED YOUR PHONE
I was trying to install Arrow OS custom ROM to Motorola one power using TWRP. It got flashed, when I flashed the Gpps Rom with it, it didn't flashed and I rebooted the phone right there. The phone is now in a hard brick mode and is not responding to anything, is there anything I can do to fix it? Could you please guide me with the complete procedure?
You must use a blankflash to boot bootloader.BlankFlash available for
Moto One Power (Chef) https://mirrors.lolinet.com/firmware/moto/chef[/
.1 install Motorola drivers,2 install quallcom drivers for Motorola procesor(gsmusbdrivers.com/download/qualcomm-hs-usb-qdloader-9008-driver-64-bit-windows) .3 use flashbat in blankflash directory,4 press volume down and power on phone.5 connect phone with pc and proces will be starting.if your phone starting in bootloader mode ,you can flash stock room
Thank you for your help and response. I followed the steps as you mentioned. On step 3 when I run the Flashbat file, It gives the below error, and the phone never started
[112.478] ReadFile() failed, GetLastError()=0
[125.434] ReadFile() failed, GetLastError()=0
when blankflash starting you can release the wolume and power.try differrent usb port in pc.I have the same problem with custom roms,You see port com in device manager on pc?
It worked, but how did you know all this? Just spot on :good:
I tried this method but not working on my phone, xt1942-1. This is the Chinese version p30 note I got from AliExpress. I see the device in device manager as port 9008
Any help would be appreciated!
Hi,you are try change a port USB in PC?this method works,my phone is the same like your,Moto p30 note from aliexpress
Thanks, I tried all usb ports on my pc but same problem. Should we press power and volume down buttons after connecting to pc? Please help I just got this phone today and bricked right away ...
Also there are two blankfash versions on the link you provided which one to use?
Hello again.you can reinstall drivers,change partition with blankflash folder.last time when I'm bricked my phone ( trying flash customrom )I waste half day to recover my moto.im change drivers,folders,USB port,try the same on laptop and nothing.But when I'm wakeup morning and try one more time it's works!I don't no why,maybe I'm stupid,but I think is a problem with drivers or something.You must try more and more,and do not give up!I'm use blankflash from Android 9
dadm said:
Hello again.you can reinstall drivers,change partition with blankflash folder.last time when I'm bricked my phone ( trying flash customrom )I waste half day to recover my moto.im change drivers,folders,USB port,try the same on laptop and nothing.But when I'm wakeup morning and try one more time it's works!I don't no why,maybe I'm stupid,but I think is a problem with drivers or something.You must try more and more,and do not give up!I'm use blankflash from Android 9
Click to expand...
Click to collapse
I tried again today and Voila its working! Blankflash literally tests your patience. Thanks @dadm for your suggestions and now I have a working moto one power as my daily driver!
htcmusic said:
I tried again today and Voila its working! Blankflash literally tests your patience. Thanks @dadm for your suggestions and now I have a working moto one power as my daily driver!
Click to expand...
Click to collapse
Hi @dadm I could not get my SIM card detected in RR rom and tried to flash stock again. Now I am in a bootloop whatever I do. Which stock did you use to revert back? And is your SIM card detected?
I have a few questions if anyone could answer. I am looking to get hands on this phone but making sure everything goes as I expect.
1.Does any member have knowledge which of this Device variants (XT1942-1, XT1942-2, XT-942-3) qualify for "Unlocking Boot-loader" and which variant does not support unlocking. I am lookig for 4/64gb Chef.
2. Is there Any Custom Pie Rom with Solid stability + Efficient & Effective Kernel?
3. Does stock Motorola Camera app works 100% in a custom flashed Rom as it does in Stock Rom or we have to use Google Pixel Camera apps as an alternative?
4. Is there anyway to get back to stock image from Custom rom.
5. How to recover the device from a Hard Brick.
6. Not but least. How well this device performs while playing PUBG.
Phone flashing locked and stuck at fastboot mode
I have done a stupid thing after flashing stock ROM I have flashed twrp and my stock ROM was stuck at loop after that I have locked the device and it showing it device is corrupted and will not boot
Could any body help me plss.??
I tried this blankflash.bat but it showing <waiting for device> my phn is already connected to pc
Ravi2730 said:
I have done a stupid thing after flashing stock ROM I have flashed twrp and my stock ROM was stuck at loop after that I have locked the device and it showing it device is corrupted and will not boot
Could any body help me plss.??
I tried this blankflash.bat but it showing <waiting for device> my phn is already connected to pc
Click to expand...
Click to collapse
Phone must be in EDM to flash blankflash
Sent from my ali using XDA Labs
Thanks for reply
sd_shadow said:
Phone must be in EDM to flash blankflash
Sent from my ali using XDA Labs
Click to expand...
Click to collapse
Actually how to enter EDM mode could you pls explain in steps my phone just start into fastboot,no recovery, no boot. Pls help me bro.
Problem solved
Ravi2730 said:
Actually how to enter EDM mode could you pls explain in steps my phone just start into fastboot,no recovery, no boot. Pls help me bro.
Click to expand...
Click to collapse
Anyone stuck in fastboot when it shows your phone is corrupt and will not boot just flash the command
fastboot boot boot.img file in stock room phn will automatically start everything working it work as a flash...?