Guys I was trying to root the S6 920F and my phone stuck in this cyan screen which says Downloading...Do not turn off target... I really need your help i dont know what to do.
The log from Odin3 was this:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-zeroflte-zerofltexx-smg920f.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
In my panic i put a tick on Auto Reboot on options and i pressed start again.... the logs were these:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-zeroflte-zerofltexx-smg920f.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
As i searching for my problem my fault was that i unticked Autoreboot and F. Reset time. Is there anything which i can try to do?
Please give me your help. I dont know what to do!!! thanks in advance.
dimitris_dimos said:
Guys I was trying to root the S6 920F and my phone stuck in this cyan screen which says Downloading...Do not turn off target... I really need your help i dont know what to do.
The log from Odin3 was this:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-zeroflte-zerofltexx-smg920f.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
In my panic i put a tick on Auto Reboot on options and i pressed start again.... the logs were these:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-zeroflte-zerofltexx-smg920f.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
As i searching for my problem my fault was that i unticked Autoreboot and F. Reset time. Is there anything which i can try to do?
Please give me your help. I dont know what to do!!! thanks in advance.
Click to expand...
Click to collapse
Are using an AT&T variant
Sent from my SAMSUNG-SM-G925A using XDA Free mobile app
LeKtRiCzzz said:
Are using an AT&T variant
Sent from my SAMSUNG-SM-G925A using XDA Free mobile app
Click to expand...
Click to collapse
no... i just finally solved my problem by pressing volume down and volume up and then power button for 10 sec. The phone made a little reset and finally was rooted. Could anyone tranfer this topic ''on non edge'' topics? @LeKtRiCzzz thanks for your response.
I have the cyan screen aswell.
says downloading...
ODIN MODE
Product name: sm-6920F
current binary: Samsung official
system status: official
reactivation lock: off
secure download: enabled
Knox warranty void: 0 (0x0000)
Rp swrev: 1
Kernel rp swrev: 1
And it won't reset when doing the volume down/ up power button
Odin screen
Jw89 said:
I have the cyan screen aswell.
says downloading...
ODIN MODE
Product name: sm-6920F
current binary: Samsung official
system status: official
reactivation lock: off
secure download: enabled
Knox warranty void: 0 (0x0000)
Rp swrev: 1
Kernel rp swrev: 1
And it won't reset when doing the volume down/ up power button
Click to expand...
Click to collapse
I was just having the same problem! I was just trying to fix the problem with the TouchWiz deal that kept saying "TouchWiz is not responding. Do you want to close it?" because it kept freezing my phone. So I found something online that gave suggestions on how to fix it and the screens that were supposed to pop up did not and I ended up getting into that. It sat that way for at least a half hour before I decided to search online for a way to make it turn back on. It doesn't give you an amount of time that it is supposed to take to finish so I was afraid I was going to ruin it by stopping. I did try that person's suggestion on how to reset it. I think the way they described it was confusing so it took me trying a couple different ways to figure out what they meant. Try holding down the volume up, volume down, and power button *all at the same time* for 10 seconds. That finally worked for me. Now I'm just wondering what I may have messed up by stopping the proccess. ??
No worries. I don't think you messed up anything.
I finally managed to shut it off using volume button, home button, power button. Turned it back on and everything worked the way it should.
thanks a ton
Jw89 said:
No worries. I don't think you messed up anything.
I finally managed to shut it off using volume button, home button, power button. Turned it back on and everything worked the way it should.
Click to expand...
Click to collapse
thanks a lot BRO....YOU MADE MY DAY...BROKE MY HEAD FOR SUCH A SIMPLE SOLUTION....THANKS AGAIN......
Thanks A Lot
dimitris_dimos said:
no... i just finally solved my problem by pressing volume down and volume up and then power button for 10 sec. The phone made a little reset and finally was rooted. Could anyone tranfer this topic ''on non edge'' topics? @LeKtRiCzzz thanks for your response.
Click to expand...
Click to collapse
Well, can't tell you how much it helped Thank You Thanks a lot
why did that cyan screen with the Download stuff come on in the first place?
It turns off with volume down, power etc, but when it turns back on it goes straight back into the cyan screen. Am stuck now and cant sort it. I need the phone today as I have no landline and have calls! Ta
Related
Hi all,
unfortunately i have broken the screen of my Note, completely, no touch response and something like this.
I'm be able to connect the phone with kies and recover all data, but with kies it's impossibile to reset the firmware.
I want to sell my phone as broken phone but i need to do an hard reset to be sure that all personal data is deleted,
how i can do this?
Thanks a lot guys
is the screen lil bit visible?
nokiamodeln91 said:
is the screen lil bit visible?
Click to expand...
Click to collapse
no completely black with no touch response
what rom were u on. If u r able to connect to kies the. u should be able to see the phones drives in my computer as well. u can delete some data from there.
I guess u can do it using adb
If you need to do factory-reset,follow the following steps:
Download this
Open ODIN
put factory_reset.tar.md5 in PDA section and donot check/uncheck anything else...
Put your phone in download mode and connect it to PC.
hit start and it will flash and reboot.
And the device will be factory resetted
ODIN is attached in this post if you need it
This is a very good news, just 2 questions:
1. to put my phone in download mode i have to switch on the phone keeping pressed "volume down" "home" and "power" after just press volume down to enter in download mode, is that right ?
2. if i do the step 5 and the phone is not in download mode what happen?
the screen is completely black and i'll be blind when follow this steps
maybe i have done something wrong but i don't know what...
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> factory_reset.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
duombo said:
maybe i have done something wrong but i don't know what...
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> factory_reset.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
It failed at setting up connection...is kies running at background???if yes,stop its service and try again...
Sent from my GT-N7000 using xda app-developers app
duombo said:
This is a very good news, just 2 questions:
1. to put my phone in download mode i have to switch on the phone keeping pressed "volume down" "home" and "power" after just press volume down to enter in download mode, is that right ?
2. if i do the step 5 and the phone is not in download mode what happen?
the screen is completely black and i'll be blind when follow this steps
Click to expand...
Click to collapse
Step 1 is wrong
Volume down + home +power
That will lead to warning Page
Here you have to press volume up (you wrote down) to enter download mode,
And looking to log device added two times, this corelate your mistake , because you are pressing volume down in warning Page that will reboot your device normally instead of download mode and after booting it gets added again
One thing I want to add, the file you are flashing will raise flash counter, so if you are covered under warranty, this may voids warranty.
Alternatively you can flash stock rom file for CSC tab, that will erase everything.
Sent from my GT-N7100 using xda premium
dr.ketan said:
Step 1 is wrong
Volunteer down + home +power
That will lead to warning Page
Here you have to press volume up (you wrote down) to enter download mode,
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
he he.. r u using swiftkey?? damm! autocorrect
---------- Post added at 02:18 AM ---------- Previous post was at 02:17 AM ----------
but u correctly pointed it out
Oohhh that idiot swift key, you also have pointed out correctly
Sent from my GT-N7100 using xda premium
dr.ketan said:
Step 1 is wrong
Volume down + home +power
That will lead to warning Page
Here you have to press volume up (you wrote down) to enter download mode,
And looking to log device added two times, this corelate your mistake , because you are pressing volume down in warning Page that will reboot your device normally instead of download mode and after booting it gets added again
One thing I want to add, the file you are flashing will raise flash counter, so if you are covered under warranty, this may voids warranty.
Alternatively you can flash stock rom file for CSC tab, that will erase everything.
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
I think it wont raise the counter because its just an empty data partition and some stock rom contains this.As far as I know only flashing modified kernel will raise the counter.But today evening i will test to confirm it
Sent from my GT-N7000 using xda app-developers app
I don't think counter matters at this moment.. He wants to sell the phone so he wants to delete data.
vijai2011 said:
It failed at setting up connection...is kies running at background???if yes,stop its service and try again...
Click to expand...
Click to collapse
thanks i will try again, btw yes in pc was running some kies process i will try to kill them
dr.ketan said:
Step 1 is wrong
Volume down + home +power
That will lead to warning Page
Here you have to press volume up (you wrote down) to enter download mode
Click to expand...
Click to collapse
ok, thanks for correct my mistake
nokiamodeln91 said:
I don't think counter matters at this moment.. He wants to sell the phone so he wants to delete data.
Click to expand...
Click to collapse
Right, i only need to erase my personal data, after selling the phone, the guy have bought my phone have a new screen of Note and when he repair the screen than he will be able to flash with what he want, i want just be sure to erase all of my personal stuff
Thank you very much guys i will keep you updated
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> factory_reset.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> data.img
<ID:0/010> NAND Write Start!!
<ID:0/010> Transmission Complete..
<ID:0/010> Now Writing.. Please wait about 2 minutes
<ID:0/010>
<ID:0/010> Receive Response from boot-loader
<ID:0/010> Complete(Write) operation failed.
<ID:0/010> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Guys i don't know what's wrong now... any help?!?!?
Don't worry the 2nd time go ok ))
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> factory_reset.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> data.img
<ID:0/010> NAND Write Start!!
<ID:0/010> RQT_CLOSE !!
<ID:0/010> RES OK !!
<ID:0/010> Completed..
<ID:0/010> Added!!
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/010> Removed!!
OK, the last question (sorry for all of this trouble, and for my bad english), now, with this operation, i'm SURE that all of my data was deleted from the phone, right?
duombo said:
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> factory_reset.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> data.img
<ID:0/010> NAND Write Start!!
<ID:0/010> Transmission Complete..
<ID:0/010> Now Writing.. Please wait about 2 minutes
<ID:0/010>
<ID:0/010> Receive Response from boot-loader
<ID:0/010> Complete(Write) operation failed.
<ID:0/010> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Guys i don't know what's wrong now... any help?!?!?
Click to expand...
Click to collapse
I think you must be doing something wrong...
I downloaded the file which i uploaded(to verify that its ok) and flashed it with Odin and The result is pass..Log is here..
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> factory_reset.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> data.img
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
Attached a pic too...Maybe you doin something wrong on your side???
General info:It didnt raise the counter
Edit:Good that you have passed .Yeah everything on data is wiped now.But files on sd will remain...
vijai2011 said:
General info:It didnt raise the counter
Edit:Good that you have passed .Yeah everything on data is wiped now.But files on sd will remain...
Click to expand...
Click to collapse
i removed the sd card before start this process
what is the counter? (bad question eh!? really sorry)
ok now everything is cleared and i can give my phone to the buyer :good:
btw i don't know how to say thank you at all, specially at vijai2011
duombo said:
i removed the sd card before start this process
what is the counter? (bad question eh!? really sorry)
ok now everything is cleared and i can give my phone to the buyer :good:
btw i don't know how to say thank you at all, specially at vijai2011
Click to expand...
Click to collapse
yes you can give now...
Custom binary Counter is something put up by samsung on our phones that shows them how may time we have flashed insecure (modified kernel) on our phone.It is shown in download mode.But it can be easy resetted on a rooted phone using TriangleAway app by chainfire.
And you can press thanks for all my posts if you really need to thank me .But remember you can only give 8 thanks per day
can i push "thanks" 2 times per post?
thank you very much
I'm new here and I couldnt find a thread which had the same problem as me solved so here we go!
I tried manually installing the official jellybean firmware on my N7000 following the steps exactly (usb debugging on, download mode etc) Once I started to run Odin everything was fine until a massive FAIL occured. This is what Odin said
"<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000ZSLM5_N7000OZSLM5_N7000XXLSO_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> cache.img
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)"
Anyway now my phone won't start, it will turn on and but it gets stuck on the Samsung Logo, I booted it into recovery mode, wiped cache, user data and rebooted but it was still stuck on the Samsung logo. How do I fix my phone from here??
Have you installed the drivers on your pc?
64 bit - http://drivers.softpedia.com/get/MOBILES/Samsung/Samsung-Galaxy-S-USB-Driver-for-Windows-x64.shtml
32 bit - http://drivers.softpedia.com/get/MOBILES/Samsung/Samsung-Galaxy-S-USB-Driver-for-Windows-x86.shtml
Install the driver and then try again
Sent from my GT-N7000 using Tapatalk 2
check if kies is running.. close it from task manager... run odin as admin.. aslo before flashing again.. you need to power off and reboot into download mode
Thank you!!
Thanks, that's what I hadn't done, install the drivers. All working good now and have to say its great to finally have jellybean on it!
Ok so i have a samsung galaxy s3 mini the model is sm-g730a it was running 4.2.2 and i was messing with an app called aniMOD and it asked me to reboot i did and it "soft bricked" my phone (i shut it off turn it on and it goes to the AT&T logo then freezes) i have tried multiple ways to fix it but it also has write protection enabled so i cant do anything with it can anyone help me please? if someone could tell me how to turn off write protection on the phone or how to unbrick it it would be greatly appreciated...
Oh And I Do Have Odin Mode And Recovery Mode that works on my phone that is all though
have also tried using odin it says
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> recovery-clockwork-touch-6.0.2.7-golden.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
i have a odin recovery for recovery and boot just message me on aim: assassinanex or facebook: lane.wiscombe or yahoo: [email protected]] or [email][email protected]
Snowwulfe said:
Ok so i have a samsung galaxy s3 mini the model is sm-g730a it was running 4.2.2 and i was messing with an app called aniMOD and it asked me to reboot i did and it "soft bricked" my phone (i shut it off turn it on and it goes to the AT&T logo then freezes) i have tried multiple ways to fix it but it also has write protection enabled so i cant do anything with it can anyone help me please? if someone could tell me how to turn off write protection on the phone or how to unbrick it it would be greatly appreciated...
Oh And I Do Have Odin Mode And Recovery Mode that works on my phone that is all though
have also tried using odin it says
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> recovery-clockwork-touch-6.0.2.7-golden.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
you are an idiot.. you brivjed your phone flashing a recovery that is not for this phone.. why don't people read before leaping.
Sent from my SGS 4
@Snowwulfe Tried factory reset in recovery?
Sent through time and space from my s3mini/CM10.2
successful unbrick
I just unbricked my sm-g730a. you need a 2nd phone that is working, some downloads, and short 2 pins on motherboard.
Worked if your still interested...
I bricked my samsung galaxy s6 tmobile after flashing the stock recovery img. and having a rom installed. I am trying to flash the stock rom for android 6.0.1 but I keep getting this error:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920TUVS5EQA2_G920TTMB5EQA2_G920TUVS5EQA2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
I dont now how to fix this and im a noob to this. I would really appreciate any help to fix this problem. Also, I can only enter to download mode and smart switch hasnt worked for fixing my phone.
vandres1975 said:
I bricked my samsung galaxy s6 tmobile after flashing the stock recovery img. and having a rom installed. I am trying to flash the stock rom for android 6.0.1 but I keep getting this error:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920TUVS5EQA2_G920TTMB5EQA2_G920TUVS5EQA2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
I dont now how to fix this and im a noob to this. I would really appreciate any help to fix this problem. Also, I can only enter to download mode and smart switch hasnt worked for fixing my phone.
Click to expand...
Click to collapse
Hey man
You fix it yet?
britchel said:
Hey man
You fix it yet?
Click to expand...
Click to collapse
Nah , I'm going to send it to Samsung to see if they can fix it. I think something is wrong with the bootloader.
vandres1975 said:
Nah , I'm going to send it to Samsung to see if they can fix it. I think something is wrong with the bootloader.
Click to expand...
Click to collapse
You try with smartswitch?
That's how I fix mine
britchel said:
You try with smartswitch?
That's how I fix mine
Click to expand...
Click to collapse
I tried smart switch but I always get an error when its starts flashing my phone. It doesnt seem to work with me and I might try another pc. Hopefully there is a solution found for this.
vandres1975 said:
I tried smart switch but I always get an error when its starts flashing my phone. It doesnt seem to work with me and I might try another pc. Hopefully there is a solution found for this.
Click to expand...
Click to collapse
What error?
britchel said:
What error?
Click to expand...
Click to collapse
It doesnt say any specific error, its weird. And everytime it started flashing at around 10 percent it would stop.
So I am a poor guy that has a dream of using a Note 8 for this is my dream phone. Somebody post a listing in Facebook that his note 8 is somewhat useless for he don't know what is the problem and he is selling it as a bargain so I grab it.
Now I am stuck with this phone that won't turn on (unless you go and place it on a wireless charger then it will turn on by itself), won't do anything and is stuck with download mode(see photo 1).
I try to flash a SM-N950N firmware using Odin v3.13.1 but I am getting an error:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 4226 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
(see photo 2)
Please help me. I really want to have this note 8.
Unfortunately, XDA forums won't allow me to upload pics. You can email me @ [email protected]
Could be that the internal storage is faulty and needs repaired.
iceepyon said:
Could be that the internal storage is faulty and needs repaired.
Click to expand...
Click to collapse
What do you mean internal storage? like the emmc?
eunszette said:
What do you mean internal storage? like the emmc?
Click to expand...
Click to collapse
Yes.
iceepyon said:
Yes.
Click to expand...
Click to collapse
That is sad. Well I try to do it again and I am getting a different error which is
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
Flash the root file via odin. That is the easiest way to repartion. This worked for me.
Sent from my SM-N950F using Tapatalk
where is that root file via odin @yashthemw ?
iceepyon said:
Could be that the internal storage is faulty and needs repaired.
Click to expand...
Click to collapse
Hi am wondering if you could help with my Galaxy Note 8
I am able to install the firmware using ODIN without any errors on download mode but after ODIN is finished the phone turns off and does not boot.
I have taken the phone to a repair shop as well and they have confirmed that there is no hardware issues,
truenitos said:
where is that root file via odin @yashthemw ?
Click to expand...
Click to collapse
Just wondering if you got the issue fixed, I have the exact same problem
Many thanks for the help in advance
Yashfauuu said:
Just wondering if you got the issue fixed, I have the exact same problem
Many thanks for the help in advance
Click to expand...
Click to collapse
Here it is, flash it via odin in AP tab.
https://mega.nz/#!ft0mWAJB!DbVu2omeZIHpXvYPGVBJZmKE1ga5_dH4oIUx5WXhkck
Here it is, flash it via odin in AP tab.
https://mega.nz/#!ft0mWAJB!DbVu2omeZ...dH4oIUx5WXhkck
Click to expand...
Click to collapse
I have the same problem. Only download mode available. Cannot turn on the phone after restarting, the phone turns on automatically after about 1 hour.
The above file stops at:
<ID:0/011> Added!!
<ID:0/011> Odin engine v(ID:3.1401)..
<ID:0/011> File analysis..
<ID:0/011> Total Binary size: 6116 M
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Set PIT file..
<ID:0/011> DO NOT TURN OFF TARGET!!
<ID:0/011> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
did it will work forme ( N950N) u5
the file in meag is encrypted could you pleasegive us the decription password
my phone stops also like this