Related
Hey Everyone,
It's become kinda obvious now that i really need to change out all my old 1A chargers for 2A chargers now.
The one that comes with the phone is nice - if I didn't need the adapter to go with it. Now it's huge and chunk.
I'd like a pretty small charger, like the wonderful 1A TC U260 I got with my mytouch 4g.
I'm considering the following:
PowerGen Dual USB 2A 10W Car charger:
http://www.amzn.com/gp/product/B006...=1789&creative=390957&creativeASIN=B006SU0SX0
PowerGen Dual Port Travel Wall Charger
http://www.amazon.com/PowerGen-Travel-Charger-Samsung-included/dp/B0073FE1F0/ref=cm_cr_dp_asin_lnk
Griffin GC23139 PowerJolt Dual car charger
http://www.amazon.com/Griffin-GC231...e=UTF8&qid=1349479987&sr=1-1&keywords=GC23139
(I really liked their dual mini which I used for a long time)
Any recommendations?
That first wall charger looks like something I'd buy. The charger and adapter I got from handtec is just so huge and ugly
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
How about the old HP touchpad chargers. IIRC those are 2a chargers. And they are cheap
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
I bought this one. Have not recieved it yet but looks good on paper.
http://pages.ebay.com/link/?nav=item.view&id=170905466556
Sent from my GT-N7100 using xda app-developers app
This is kinda related to this thread
Can I use another USB cable with the original note 2 charger and still get 2A from it? I feel like the USB cables for my sgs2 fit better in my note 2 than the one that comes with it.
none of those car chargers will work if you plan on using the phone
ChodTheWacko said:
Hey Everyone,
It's become kinda obvious now that i really need to change out all my old 1A chargers for 2A chargers now.
The one that comes with the phone is nice - if I didn't need the adapter to go with it. Now it's huge and chunk.
I'd like a pretty small charger, like the wonderful 1A TC U260 I got with my mytouch 4g.
I'm considering the following:
PowerGen Dual USB 2A 10W Car charger:
PowerGen Dual Port Travel Wall Charger
Griffin GC23139 PowerJolt Dual car charger
(I really liked their dual mini which I used for a long time)
Any recommendations?
Click to expand...
Click to collapse
I have done a lot of research on this. If it is compatible with ANY apple products then it will not charge with your cable due to the USB standard not being the same. You will have to either mod the product or the cable to get the full 2a charge. Plus I believe the Powergen and the griffin are only 2a total output so if you are charging 2 devices it will only be 1a and 1a ports. You need to look for a 4a total output. I have yet to find any that work. If anyone can find one please let me know. Charging with a 1a charge and using a GPS you will lose power as it does not charge fast enough. You need a full 2a. p.s. had to remove the outside links because I havent posted 10x yet.
yankees177 said:
If it is compatible with ANY apple products then it will not charge with your cable due to the USB standard not being the same.
Click to expand...
Click to collapse
This is not quite true.
I believe Apple only has high speed charging if you don't use an 'apple' USB port, similar to how you don't get high speed charging if you use a USB data cable versus a charging cable.
To be 100% I don't understand how it works exactly.
I can tell you, however, the following:
1) My Griffin charger happily charged my galaxy note even going full blast (GPS/bluetooth/screen on), and I bought some iphone chargers to help my friends out, and they charged their phones (slowly) with my charger too.
2) The powergen 10W charger I put above also happily (and quickly) charges my Note II going full blast.
It actually has a different 'Apple' vs 'non apple' USB port. Non-apple stuff may not charge in the apple slot, but that's not a big deal to me. I have only one phone. My iphone friends are usually the ones running out of power anyway, so it's kind of nice one side is applely.
- Frank
to the OP, try this:
http://www.amzn.com/Mediabridge-Hig...&qid=1351550361&sr=1-12&keywords=powergen+3.1
then get a charging cable:
http://www.amzn.com/Naztech-Micro-U...1351550441&sr=1-2&keywords=usb+charging+cable
or if you have an extra cable lying around, mod it. See this post to get a better idea:
http://forum.xda-developers.com/showpost.php?p=22546114&postcount=1
Thread linked for reference:
http://forum.xda-developers.com/showthread.php?t=1686971
I have many 2a carchargers that worked great with a gs3 even an iPad that won't provide enough juice to the note to actually charge it while doing intensive tasks like mhl out in the car.
if anyone finds a car charger that actually works post it out we need a fast charge custom kernel.
I have a thread in the general note Sprint forum thatwe are discussing this as well and it seems no charger will work but an adapter I'm waiting on May
what about this?
http://www.amazon.com/gp/product/B00845NI8E/ref=oh_details_o00_s00_i00
dual 2A port car charger and comes with a Free MicroUSB cable that can handle faster charging. I ordered on so we'll see
peekeesh said:
to the OP, try this:
http://www.amzn.com/Mediabridge-Hig...&qid=1351550361&sr=1-12&keywords=powergen+3.1
This appears, from the reviews, to be an "apple"ish charger and doesn't work well with android devices.
Click to expand...
Click to collapse
Would this work?
http://pages.ebay.com/link/?nav=item.view&id=150928933202
yankees177 said:
I have done a lot of research on this. If it is compatible with ANY apple products then it will not charge with your cable due to the USB standard not being the same. You will have to either mod the product or the cable to get the full 2a charge. Plus I believe the Powergen and the griffin are only 2a total output so if you are charging 2 devices it will only be 1a and 1a ports. You need to look for a 4a total output. I have yet to find any that work. If anyone can find one please let me know. Charging with a 1a charge and using a GPS you will lose power as it does not charge fast enough. You need a full 2a. p.s. had to remove the outside links because I havent posted 10x yet.
Click to expand...
Click to collapse
Im looking for 2A on each port too wall charger and only finds these.
Car charger:
http://www.amazon.com/Qmadix-QM-DMCH4-2-AP-WH-Twin-Tablet-Charging/dp/B008AGMO7S/ref=pd_cp_e_1
Wall charger, but thinks it divides 4A on each port?
http://www.alibaba.com/product-gs/650723185/UL_Approval_4A_USB_Charger_For.html
Wall charger:
http://www.thinkgeek.com/product/efbe/#tabs
Why the heck are all for ipads, iphone and no EU plug.
I got an amazon branded 2A single usb charger about 6 months ago for another phone. It charges my Note2 quick. Sorry no links...
Sent from my SGH-T889 using Tapatalk 2
What about this please? Need input.
i.Sound Portable Charger
Has 16,000 mah
Input: 12V 1A
Output: ''5V 2.1A on each connector 2.5 A together''
I charge a number of things on here...
A friend has me a bit confused saying this could damage the charging mechanisms of the phone cause it has too much voltage?
Any input please?
Thanks
One Car Charger that works
Hello,
Whether a charger works or not depends on what DCP (Direct Charge Port) modes it supports.
I suspect the GN2 uses Shorted DCP, where the USB data lines (D+ and D-) are shorted. Apple chargers sense 2.4Vdc on these lines to allow the charger to ramp to full current. Asus and some Sammy TABs use 1.2Vdc to enable full current. This is to distinguish real USB ports from chargers, and to "encourage" you to use the manufacturer's provided charger.
It would be nice if someone can confirm what DCP mode the GN2 actually uses. Not that the charger manufacturer's publish what modes they support.... However, the charger IC manufacturer's (TI, Maxim) are beginning to get good at DCP autodetection which is going to make it much easier for us consumers.
As far as finding chargers that work,
I bought a 2.1A dual car charger at Walmart, model "i-xt" that works well with the GN2 and is listed as "on AC" when connected. Implying full current.
Cheers,
-Plaz
---------- Post added at 12:43 PM ---------- Previous post was at 12:31 PM ----------
rockky said:
i.Sound Portable Charger
Has 16,000 mah
Input: 12V 1A
Output: ''5V 2.1A on each connector 2.5 A together''
I charge a number of things on here...
A friend has me a bit confused saying this could damage the charging mechanisms of the phone cause it has too much voltage?
Any input please?
Thanks
Click to expand...
Click to collapse
You don't have to worry about your phone being damaged. Phones have built-in protection for over-voltage and over current. 5Vdc is proper voltage for USB devices anyway (Output 5V, as listed in the specs). The catch is if the phone allows full current charging. That depends on the DCP mode of the charger. I'm not positive what mode the GN2 truly supports. If you already have the charger, you can determine if full current is being used by checking under settings -> battery while connected to the charger. If you see the "On AC" verbiage, the phone is in full current mode. If not, the charger is limiting to 500ma and acts like a standard USB port. You phone will still charge, but it will take longer.
Clear as mud?
Cheers,
-Plaz
http://www.amazon.co.uk/dp/B0044E7MNG/ref=cm_sw_r_an_am_ap_am_gb?ie=UTF8
Would this work?
Sent from my GT-N7105 using Tapatalk 2
Thanks
QUOTE=Plazmid;33523324]Hello,
Whether a charger works or not depends on what DCP (Direct Charge Port) modes it supports.
I suspect the GN2 uses Shorted DCP, where the USB data lines (D+ and D-) are shorted. Apple chargers sense 2.4Vdc on these lines to allow the charger to ramp to full current. Asus and some Sammy TABs use 1.2Vdc to enable full current. This is to distinguish real USB ports from chargers, and to "encourage" you to use the manufacturer's provided charger.
It would be nice if someone can confirm what DCP mode the GN2 actually uses. Not that the charger manufacturer's publish what modes they support.... However, the charger IC manufacturer's (TI, Maxim) are beginning to get good at DCP autodetection which is going to make it much easier for us consumers.
As far as finding chargers that work,
I bought a 2.1A dual car charger at Walmart, model "i-xt" that works well with the GN2 and is listed as "on AC" when connected. Implying full current.
Cheers,
-Plaz
---------- Post added at 12:43 PM ---------- Previous post was at 12:31 PM ----------
You don't have to worry about your phone being damaged. Phones have built-in protection for over-voltage and over current. 5Vdc is proper voltage for USB devices anyway (Output 5V, as listed in the specs). The catch is if the phone allows full current charging. That depends on the DCP mode of the charger. I'm not positive what mode the GN2 truly supports. If you already have the charger, you can determine if full current is being used by checking under settings -> battery while connected to the charger. If you see the "On AC" verbiage, the phone is in full current mode. If not, the charger is limiting to 500ma and acts like a standard USB port. You phone will still charge, but it will take longer.
Clear as mud?
Cheers,
-Plaz[/QUOTE]
I bought this:
http://www.amazon.com/gp/product/B005AWO8V0/
It's 2A and works great. I like that the cord is attached, so no losing a USB cable or anything. Also has an integrated USB for other devices.
Plazmid said:
Hello,
Whether a charger works or not depends on what DCP (Direct Charge Port) modes it supports.
I suspect the GN2 uses Shorted DCP, where the USB data lines (D+ and D-) are shorted. Apple chargers sense 2.4Vdc on these lines to allow the charger to ramp to full current. Asus and some Sammy TABs use 1.2Vdc to enable full current. This is to distinguish real USB ports from chargers, and to "encourage" you to use the manufacturer's provided charger.
It would be nice if someone can confirm what DCP mode the GN2 actually uses. Not that the charger manufacturer's publish what modes they support.... However, the charger IC manufacturer's (TI, Maxim) are beginning to get good at DCP autodetection which is going to make it much easier for us consumers.
As far as finding chargers that work,
I bought a 2.1A dual car charger at Walmart, model "i-xt" that works well with the GN2 and is listed as "on AC" when connected. Implying full current.
Cheers,
-Plaz
---------- Post added at 12:43 PM ---------- Previous post was at 12:31 PM ----------
You don't have to worry about your phone being damaged. Phones have built-in protection for over-voltage and over current. 5Vdc is proper voltage for USB devices anyway (Output 5V, as listed in the specs). The catch is if the phone allows full current charging. That depends on the DCP mode of the charger. I'm not positive what mode the GN2 truly supports. If you already have the charger, you can determine if full current is being used by checking under settings -> battery while connected to the charger. If you see the "On AC" verbiage, the phone is in full current mode. If not, the charger is limiting to 500ma and acts like a standard USB port. You phone will still charge, but it will take longer.
Clear as mud?
Cheers,
-Plaz
Click to expand...
Click to collapse
So I understand the shorting D+/D- internally or via charging cable to enable "AC" charging. I understand that Apple and apparently Sammy/Asus use voltage on those lines to signal the requirement for full current. Here's my question: if my Note2 is connected to brand X charger and it says AC charging in the settings under battery, does that mean I am theoretically pulling the max current of that brand X charger. This of course assumes the battery is empty enough, temperatures of the battery and charger are low enough, etc...
What I'm getting at is does having a shorted charger or cable with an android on an iCharger give us full iPower? Gawd that sounds horrible doesn't it! :silly: Or, if you're getting "AC" from the iCharger is it really only 1.1A or 1.6A (just tossing those numbers out there) vice the 2.1A it would be charging an iPad at?
Hi, im just wondering is there any benefit using a 2amp charger on the htc m8 , faster charging ? i know HTC are gonna release a faster charger which is 1.67amp , is it just the amp or it has some feature Quick Charge 2.0 built in you cant get with other chargers ?
the HTC One is rated to support Quick Charge 2.0 capable of accepting up to 60 watts of power – an increase of almost 100% compared to phones with Quick Charge 1.0. The 1.5amp charger bundled with the HTC One (M8), however, does not support Quick Charge 2.0. HTC is planning on releasing an optional 1.67amp charger accessory that will come with the technology later this year
Thanks
Yeah, it will charge a bit faster.
Sent from my HTC One_M8 using Tapatalk
Tikerz said:
Yeah, it will charge a bit faster.
Sent from my HTC One_M8 using Tapatalk
Click to expand...
Click to collapse
Would it be safe though? Cause I heard someone was using a third party charger on 2.0 and the guy said it was heating up like hell
Sent from my Nexus 7 using Tapatalk
ekabon said:
Would it be safe though? Cause I heard someone was using a third party charger on 2.0 and the guy said it was heating up like hell
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
I've used the 2.0A charger that came with my Galaxy S4 and didn't really notice the phone heating up to unusual temps.
You can use a 10A charger if you have one (and it works with your power outlet), the phone should never draw more than the maximum it draws.
Sent from my C6903 using Tapatalk
I would really like to hear from someone who's actually used one with our phone model. Thanks
Sent from my HTC One_M8 using Tapatalk
ekabon said:
I would really like to hear from someone who's actually used one with our phone model. Thanks
Sent from my HTC One_M8 using Tapatalk
Click to expand...
Click to collapse
I originally used the charger I got with my M8, but then switched to a 2.5amp charger. According to GSam, my time to charge from around 80% to full is around 15 mins, but with the original charger, it was around 30 mins.
So from my experience, it does charge faster. From what I have read about QC2, the technology is in the processor in the phone. The charger can be any type, as long as it is able to deliver up to 60 watts.
See here - http://www.zdnet.com/qualcomms-quick-charge-2-0-offers-75-percent-faster-charging-7000026519/
The tech is actually in both the phone AND the wall charger:
From http://www.qualcomm.com/chipsets/quick-charge
"While Quick Charge 1.0 rests in the devices only, Quick Charge 2.0 resides in both the device, offered as a standalone IC solution or as part of the PMIC (power management integrated circuit) of Snapdragon™ 800 processors, and in the AC/DC wall charger."
The one you link is worded a little ambiguously:
"Qualcomm hopes to take things further by integrating Quick Charge 2.0 technology into standard micro-USB AC/DC wall chargers. These chargers will look and work like standard chargers, but will be able to deliver Quick Charge to compatible devices."
I tripped on it a couple times when reading it too, but it's implying that the tech does not currently reside in standard chargers, since they're still working on integrating it.
guess i will get the HTC fast charger when out and i bet we should get compatible quick charge 2.0 chargers too
Thanks
The amperage of the charger makes no difference, the device will only ever draw the power it requires to charge, no more. so a 5a charger would be no different to a 2a charger if the phone only draws 1.5a for example. find out what the device needs to charge and get as close as you can to that size for protection reasons
uscool said:
Hi, im just wondering is there any benefit using a 2amp charger on the htc m8 , faster charging ? i know HTC are gonna release a faster charger which is 1.67amp , is it just the amp or it has some feature Quick Charge 2.0 built in you cant get with other chargers ?
the HTC One is rated to support Quick Charge 2.0 capable of accepting up to 60 watts of power – an increase of almost 100% compared to phones with Quick Charge 1.0. The 1.5amp charger bundled with the HTC One (M8), however, does not support Quick Charge 2.0. HTC is planning on releasing an optional 1.67amp charger accessory that will come with the technology later this year
Thanks
Click to expand...
Click to collapse
ekabon said:
Would it be safe though? Cause I heard someone was using a third party charger on 2.0 and the guy said it was heating up like hell
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
Yes, it will charge it faster. I used my 2amp charger and it did charge it faster. The phone may have some protection built in to protect the phones hardware. But the battery can handle much higher charge rates and the battery shouldn't start heating up till 20-30 amps. Yes, that's right.
I use Li-poly to race electric RC's and we charge them up to 50 amps. This charger will --->http://www.hobbyking.com/hobbyking/store/__46368__iCharger_308DUO_1300W_Dual_Channel_8s_Balance_Charger.html
Most people only charge at 5-10 amps, but to get peak performance, you will need to create a bit of heat and that doesn't happen till 20-30 amps.
Since I jumped from my old note 3tothe m8 I was able to keep the charger and it's a 2A one. Will I get the full 2.0 benefits with it or must I wait for the HTC one?
Sent from my HTC One_M8 using xda app-developers app
PunishedSnake said:
Since I jumped from my old note 3tothe m8 I was able to keep the charger and it's a 2A one. Will I get the full 2.0 benefits with it or must I wait for the HTC one?
Sent from my HTC One_M8 using xda app-developers app
Click to expand...
Click to collapse
You will get whatever amp the M8 can take. i assume its 2A
I have a 2amp charger and i use it for my M8. i only see about a 30 min different from using a 1amp charger.
Its not just Amps, quickcharge 2.0 Also bumps up voltage. I tested multiple combinations with my htc one M8, here are my findings:
Quickcharge 2.0 18W Aukey (with regular micro usb cable): 9v/1.1A (~10w)
Quickcharge 2.0 18W Aukey (with data cut off cable): 5v/1.52A (~7.5w)
Wall 5v 2.4A charger: 5v/1.52A (~7.5w)
Stock 5v 1A charger: 5v/0.99A (~5w)
Car 5v 2A charger: 5v/1.3A (~6.5w)
some old 5v 700mA charger: 5v/0.7A (~3.5w)
MacBook Air USB port (2013) (with regular micro usb cable): 5v/500mA (~2.5w)
MacBook Air USB port (2013)(with data cut off cable): 5v/1A (~5w)
Ipad charger rated 5.2V/2.3A : 5v/1A (~5w) (no clue why its so sucky)
Also I noticed m8 once connected to charger (non Quickcharge 2.0) slowly increases charge current. if voltage drops below 4.92v it drops it back to these fixed values, whichever is immediate lower: 3oomA, 500mA, 700mA, 1A, 1.3A, 1.42A. 1.52A
these values are as per multimeters.
my car charger is tricky, it sometimes just falls to 1A instead of 1.3 as it border lines V to 4.92 while at 1.3Amps. (it is rated for 2.4A)
Dude... This thread you replied to is a YEAR old!
This has already been heavily discussed in newer threads.
Sent using Tapatalk
Bought a few car chargers that were claiming to be fast charge or quick charge enabled.
Got a Spigen and couple no names brands. Unfortunately, as great as the Spigen looks, it did not fast charge.
You can see the results here https://youtu.be/KWts6ZCu2Gs
I was going to say check the cable as low quality cables can prevent fast charging or currents over 1A. But I looked up that Spigen charger & it's not listed as a QC2.0 fast charger, neither is that PowerGen, not on Amazon anyway.
The term fast charger is often used by manufacturers for chargers with output around 2A+. The 2.4A output per port alone is an indication that it's not a QC2.0 charger. It has to say QC2.0 for actual fast charging or look at the output. It has to have 9V output, some will have 12V output as well but isn't supported by Samsung phones anyway.
Thanks I assumed anything listed as fast charge would work as a qc2.0
Seems kind of misleading to say fast charge on the product listings.
Yeah it is misleading. Below is the one I have & it works great. Nice low profile size if you don't care about multiple ports. (There's multiple port models on the same page)
http://www.amazon.com/gp/product/B00XU0GONO?psc=1&redirect=true&ref_=oh_aui_detailpage_o04_s00
i use this and it works great!
http://www.amazon.com/gp/aw/d/B00LJ...charge+car&dpPl=1&dpID=415RRwIYhgL&ref=plSrch
Yes basically as others have said. This isnt a "Quick Charge 2.0". Its just a standard 2.4a charger.
Aukey branded one fast charges for me
Sent from my SM-N920W8 using Tapatalk
Ather said:
i use this and it works great!
http://www.amazon.com/gp/aw/d/B00LJ...charge+car&dpPl=1&dpID=415RRwIYhgL&ref=plSrch
Click to expand...
Click to collapse
I'm using this one and it's perfect. Don't go for cheap no brand ones. Wait for good deals for high quality ones.
Got mine from the VZW store, the one with a red tip. No extra USB slot, but works great, and has an LED light on the tip, so it'll light up when you need a light or even as a flash light in the car. It supports QC 2.0 .
simranjit3001 said:
Aukey branded one fast charges for me
Sent from my SM-N920W8 using Tapatalk
Click to expand...
Click to collapse
Yeah I got the Aukey one with two slots and both work with fast charging.
Yeah nothing is stopping them from calling anything a "fast charger". This basically just indicates that the port supplies more than the USB standard for 500mA. so a 2A charger will obviously be "fast"er
Anker FTW
IMO the only chargers I trust anymore are Anker. I have the 4 port one in the car and it works awesome.
Anker Quick Charge (Certified)
If plugging in more than one device at a time (non-quick charge)
Anker 4 USB Charger
I got a new nexus 5x and I don't have the original wall charger.
I was thinking to charge it with the cable/wall charger that came with my 6p.
I was wandering weather it would be safe to charge with the 6p charger and if there are any differences between the two chargers.
Thanks.
They should be the same.
I am currently charging my 5x with my 6p charger with zero issues.
I had to borrow a coworker's 6P charger for my 5X and I charged to 100% w/ no issues.
I sold my 6p but kept the charger. used and compared it to the 5x's. they charge at pretty much the same rate. it just depends on thermal throttling and heat on how fast it charges. all good and nothing to worry if you ask me ☺
Sent from my Nexus 5X using Tapatalk
k.s.deviate said:
I am currently charging my 5x with my 6p charger with zero issues.
Click to expand...
Click to collapse
Good luck.
Brady0123 said:
Good luck.
Click to expand...
Click to collapse
Why do you say that? Do you know something that the class would benefit from?
k.s.deviate said:
Why do you say that? Do you know something that the class would benefit from?
Click to expand...
Click to collapse
I mean there may be some hidden trouble probably
Brady0123 said:
I mean there may be some hidden trouble probably
Click to expand...
Click to collapse
Look at the "what's in the box" in the Google store for the 5x and 6P. Both have the same 15W (5V/3A) charger listed.
There is no difference between the chargers.
So as long as the Watts, volts, amps are the same I can use any (non cheap) wall block? I have TONS of Samsung wall blocks and just bought 4 USB type c to a cords...still only have 1 wall block. Can I use the Samsung blocks?
Sent from my SM-G935T using XDA-Developers mobile app
v2.2v said:
So as long as the Watts, volts, amps are the same I can use any (non cheap) wall block? I have TONS of Samsung wall blocks and just bought 4 USB type c to a cords...still only have 1 wall block. Can I use the Samsung blocks?
Sent from my SM-G935T using XDA-Developers mobile app
Click to expand...
Click to collapse
Take a look at the article below. Yes, you can. However, it won't charge as quickly if it's a Samsung quickcharge charger. What really matters is that your cable is compliant. There has been enough talk on this board about that already.
Personally, I have four different chargers that I use. All work well.
1) The original one that came with the phone.
2) An old 1A charger from Samsung (non-quickcharge). Doesn't charge quickly. I use it over night.
3) A wall outlet with a 2A USB plug built in. Charges pretty quickly, but not as fast as the original charger, which puts out up to 3A.
4) iXCC dual usb 4.8A 24W car charger. Puts out 2.4A to each port and charges my phone almost as fast as the original charger.
http://www.androidcentral.com/ask-ac-can-i-use-qualcomm-quick-charger-my-usb-c-nexus-phone
While I love the Dash charging functionality, I also want to have something available with a longer cable (6ft). I did some searching around here and many people seem to be saying that they see speeds around 1.5A using a third-party charger and cable. I am using the Anker PowerPort 2 with Monoprice USB-A to USB-C Cables. This combination has worked to charge other USB-C phones at around 1.6A (my wife's Nexus 6P and my dad's Pixel). With my OnePlus 3 I am only seeing 0.5A charging as though it sees it as a computer USB port.
Can anyone recommend a specific charger/6ft cable that will actually charge the OnePlus 3 at a reasonable speed?
I am getting 1.5A with powerport 2 and anker powerline+ cable with my op3.
So I think your problem ist not the charger, unless there is no difference between us and Europe version
Gesendet von meinem ONEPLUS A3003 mit Tapatalk
I just use a Choetech charger (Type-C) or any of my A-> chargers. Or I use my BB 1.,8a charger with a USB C adapter.
All my chargers get like 1.3-1.5a but its whatever.