Database Develop

noob rooting troubles. HELP PLEASE!

I am trying to root my stock revo V7 2.3.4. I am not able to get through to it. I am not familiar with rooting but want to get more out of this phone. Anyone have any suggestions?

More information is needed what have you tried?
Also this shouldn't have been a new thread and shouldn't have been in this section.
Sent from my VS910 4G using xda premium

Questions or Problems Should Not Be Posted in the Development Forum
Please Post in the Correct Forums and Read THIS
Moving to General

Thanks for getting me in the right area guys. Sorry, wasn't trying to cause any problems.
I have tried the one click version with mt and it never took. Mt even tried doing it for me. I have enabled debugging and dollars each step to the last detail.
I have also tried superoneclick with no success on the install. I'm unaware of how to do it manually.
Thanks
Sent from my VS910 4G using XDA App

chefmp said:
Thanks for getting me in the right area guys. Sorry, wasn't trying to cause any problems.
I have tried the one click version with mt and it never took. Mt even tried doing it for me. I have enabled debugging and dollars each step to the last detail.
I have also tried superoneclick with no success on the install. I'm unaware of how to do it manually.
Thanks
Sent from my VS910 4G using XDA App
Click to expand...
Click to collapse
Have you tried a different computer? Even doing it the manual way will require the same exploit, and more than likely will result in the same outcome.
Sent from my VS910 4G using xda premium

I have not. I will try tomorrow morning on another. Thanks
Sent from my VS910 4G using XDA App

Yeah the manual way would more than likely cause the same issue you are doing the same thing the script does
Sent from my VS910 4G using xda premium

Rooted!
Ok, i finally rooted. I have titanium and superuser. I also downloaded and saved gingervolt 1.3 to my sd card. How do I get to the next step?

chefmp said:
Ok, i finally rooted. I have titanium and superuser. I also downloaded and saved gingervolt 1.3 to my sd card. How do I get to the next step?
Click to expand...
Click to collapse
Reboot into recovery and wipe data, then flash gingervolt, then wipe data. reboot, profit

What are the steps to reboot in recovery? I also downloaded gingervolt to my as card but I can't get into my card.
Sent from my VS910 4G using XDA App

What method of root did you use? And check your app drawer for revo tool kit then you need to download the clockwork mod recovery check what recovery you have if it isn't the 4.0.0.2-pr1 then you need to click on to install that if it didn't go through the first time keep trying but do not reboot after it says it successfully installed hit the menu soft key And reboot in to recovery once you are in there make a back up by going to the backup And restore part And choose back up after you should wipe your data by going to format system INSIDE CLOCKWORK MOD RECOVERY not from inside your phone settings for gingervolt you need to put the zip on your external sd card so that means not the one that says internal place it on the root ( main portion) not in folder then reboot into recovery (if you had to boot to put ginger volt on your sd) the same way as before then go to install zip from sd card choose the gingervolt zip nitty the install update.zip option select yes let it install then reboot.. Also in clockwork recovery you use to volume keys to navigate up And down And the power button to select
sent from my VS910 4G using xda premium

Am I supposed to download these items with my phone or when it is hooked up to my computer? I used allinoneclick by my. Worked great. I am an extreme noob with this so thanks for walking me through these steps. I do not have the tool kit in my apps
Sent from my VS910 4G using XDA App

If you rooted with mts all in one click that has cwm sticking just go into it manually. I always download everything to the phone directly makes it easier for me.

How do I get into clockwork mod? I installed and hit recovery. Whenever I hit the menu key, the more option is not there. I'm so confused
Sent from my VS910 4G using XDA App

Best way to check you have cwm download revotool kit and check that way. If it says you have it then you can reboot from revo toolkit.

indyred99 said:
Best way to check you have cwm download revotool kit and check that way. If it says you have it then you can reboot from revo toolkit.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1144951
That's for revo toolkit.

I have revo toolkit . When I click on reboot, nothing happens.
Sent from my VS910 4G using XDA App

chefmp said:
I have revo toolkit . When I click on reboot, nothing happens.
Sent from my VS910 4G using XDA App
Click to expand...
Click to collapse
Did you make sure that cwm was installed? That's what it sounds like.

How do I check that?
Sent from my VS910 4G using XDA App

Its been a while since I have been in the toolkit. There should be a button somewhere that says check recovery or something like that. You could go to the revo toolkit page and look at what the OP put on there sorry I can't really help to much on that.

safestrap recovery help!!!!

in the proccess in flashing the ics rom and just ran the exploit and got rooted and i navigated to safe system menu and i toggled safe menu and it says data.img not found sskipping restore of /data safesystem is no enabled does this mean it did not back up my previous file i want to flash this but i am curious on what this exactly means please help!!!

Someone please help! !! Just sitting in recovery waiting to find out what I should do
Sent from my SPH-D700 using XDA App

bfitzpatrickd2d said:
Someone please help! !! Just sitting in recovery waiting to find out what I should do
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
What does it ask you to do next?
Sent from my DROID BIONIC using XDA App

When you toggled to safe mode, which.toggle option did you select? One will back you up and the other one won't I don't believe.
Sent from my DROID BIONIC using XDA App

I just did toggle safe system after done it says safe system is now enabled I would flash ics I think just want to reboot but just making sure I didn't screw anything up while in recovery
Sent from my SPH-D700 using XDA App

I didn't flash any roms just rooted running the exploit and then enabled toggle safe system so I should probably just reboot and be fine but I just want to make sure
Sent from my SPH-D700 using XDA App

Once you toggle to safe, then you flash ics. Even if it didn't back up your original system, the worst that should happen when going back to your normal system is that it will take you back to a fresh install and you will need to set your accounts back up and reinstall your apps
Sent from my DROID BIONIC using XDA App

bfitzpatrickd2d said:
I didn't flash any roms just rooted running the exploit and then enabled toggle safe system so I should probably just reboot and be fine but I just want to make sure
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
If you don't flash ics (or any rom) when your in safe mode and reboot your phone, it won't load because there isn't a version of android there.
Sent from my DROID BIONIC using XDA App

Sweet give it a try thanks man ill report back in a minute
Sent from my SPH-D700 using XDA App

flashed ics and it gave me bad/installation aborted going to try and transfer on sd card with my wifes phone with a fresh download see if that works and it should go onto external correct???

I believe I have mine in internal. I think you can install it from either location.
You may want to clear the cache and stystem data before flashing if you didn't. Sometimes that helps.
Sent from my DROID BIONIC using XDA App

at this point i am worried about my battery dying on me and i am just sol...

ok looks like was just a bad md5 or something so when i flash google apps do i wipe anything prior to flashing that???

cool got it up just setting up but i have to say this rooting proccess was so much more work than i made it out to be but can't hurt to be too careful i guess

Help! can anybody flash stock firmware on my G2 before 1pm via teamviewer?

I have the LG flash tool the drivers the dll tot & kdz files. I have tried & keep getting error's I'm very much a noob I'm on the LG G2 vs98012b ioroot 21 stock rom. Using xposed framework some very important system apps got deleted factory reset doesn't work twrp recovery doesn't work can't figure out how to go back to stock. I use my phone for work & I'm lost without it at times if someone could log on before 1pm I'd pay ya for a little amount of time. Thank you
Sent from my VS980 4G using xda app-developers app

Jake Lessley said:
I have the LG flash tool the drivers the dll tot & kdz files. I have tried & keep getting error's I'm very much a noob I'm on the LG G2 vs98012b ioroot 21 stock rom. Using xposed framework some very important system apps got deleted factory reset doesn't work twrp recovery doesn't work can't figure out how to go back to stock. I use my phone for work & I'm lost without it at times if someone could log on before 1pm I'd pay ya for a little amount of time. Thank you
Sent from my VS980 4G using xda app-developers app
Click to expand...
Click to collapse
What errors are u getting? Key thing for the lg flash tool, make sure it's on port com41.
Sent from my VS980 4G using Tapatalk

Its on comp 41 everything in place I just get a milky way port error? When I screen do a unlock it says systemui has stoped & when I press my home button nothing happens... The home (v4.1.38) system app is gone. Oh & LG wizard stops at syncing contacts after factory reset.
Sent from my VS980 4G using xda app-developers app

Jake Lessley said:
Its on comp 41 everything in place I just get a milky way port error? When I screen do a unlock it says systemui has stoped & when I press my home button nothing happens... The home (v4.1.38) system app is gone. Oh & LG wizard stops at syncing contacts after factory reset.
Sent from my VS980 4G using xda app-developers app
Click to expand...
Click to collapse
The milky error is common. It's even in the description of how to restore to stock. And are you trying to run the LG flashtool with the phone on? And not in download mode
Sent from my VS980 4G using Tapatalk

No phones in DL mode I've tried everything I can think of checked unchecked milky way port read a few different how to 's on how to do it & everthing looks right start to finish? I'm on 12b I bootlooped my phone & someone via teamviewer restored it back to stock firmware everything is in place but the firmware was 11b but I've seen post saying flash back to 11b from 12b I could be mistaken?
Sent from my VS980 4G using xda app-developers app

[Q] Cant freeze OTA

Everyone says to download Titanium backup pro and freeze system update muc. Problem is that i cant find a system update muc, or anything like it. I have about 14 hours until it forces the update and it bricks my phone again. Any suggestions ?

TW717 said:
Everyone says to download Titanium backup pro and freeze system update muc. Problem is that i cant find a system update muc, or anything like it. I have about 14 hours until it forces the update and it bricks my phone again. Any suggestions ?
Click to expand...
Click to collapse
You could kdz back to 24A (so you're stock, no custom recovery), root with ioroot25, take 26A ota, then use freedom tool to install twrp.

I've attempted that before bit I can't get my phone into download mode for some reason.
Sent from my VS980 4G using XDA Free mobile app

But when I go into TiBU and look under Backup/Restore I see the System update MUC you're referring to...

I think the reason that I cant find it is because I previously went into my file explorer and changed the module update client.apk to mobile update client.old
I was told that might stop the OTA but I guess I will find out in about 45 minutes.
Sent from my VS980 4G using XDA Free mobile app

Update: I changed the mobile update client back to .apk from .old
Restarted my phone and opened tibu a d found the system update muc and froze it. Hopefully this solves my problem.
Sent from my VS980 4G using XDA Free mobile app

TW717 said:
I've attempted that before bit I can't get my phone into download mode for some reason.
Sent from my VS980 4G using XDA Free mobile app
Click to expand...
Click to collapse
Did you flash Xdabbeb's stock rom?

bricked?

I've got the Note 4 N910T3
I rooted, via the beast kernal. Everything was going fine until I decided to factory reset (had a few programs go haywire)
factory reset went fine, I reinnitialized android with my google information. Rebooted the phone, and now I'm stuck at "custom binary blocked by frp"
It's my fault for not rechecking the option in developer settings, but its too late
I can get into download mode, but simply booting, or getting into recovery give me that error.
what can I do to get my phone booting?

Odin back to stock I guess?
Sent from my SM-N910T3 using XDA Free mobile app

nib said:
Odin back to stock I guess?
Sent from my SM-N910T3 using XDA Free mobile app
Click to expand...
Click to collapse
I'm willing to give that a shot, but where would I go about finding the stock odin file? the only files I can seem to find are modded ones for the N910T, not the N910T3

Dont know if this link is legit, but check it out
http://samsung-firmware.org/download/SM-N910T3/29v3/TMB/N910T3UVU1DOFC/N910T3TMB1DOFC/
Sent from my SM-N910T3 using XDA Free mobile app

nib said:
Dont know if this link is legit, but check it out
Sent from my SM-N910T3 using XDA Free mobile app
Click to expand...
Click to collapse
that is a much earlier firmware than what came on the phone, but I'll give it a shot, just to get it booted
thanks

Yep, thats the idea
Sent from my SM-N910T3 using XDA Free mobile app

nib said:
Yep, thats the idea
Sent from my SM-N910T3 using XDA Free mobile app
Click to expand...
Click to collapse
this worked
good thing I nandroided everything from stock

crosive said:
I've got the Note 4 N910T3
I rooted, via the beast kernal. Everything was going fine until I decided to factory reset (had a few programs go haywire)
factory reset went fine, I reinnitialized android with my google information. Rebooted the phone, and now I'm stuck at "custom binary blocked by frp"
It's my fault for not rechecking the option in developer settings, but its too late
I can get into download mode, but simply booting, or getting into recovery give me that error.
what can I do to get my phone booting?
Click to expand...
Click to collapse
That would be the factory reset protection, you need to odin the stock images back on, run through the setup as fast as possible, open developer options, and turn on OEM Unlocking. From there you can flash whatever you'd like. The FRP will also block insecure kernels, and recoveries from being loaded.

That's exactly what I did. And it worked. This just so happened to be the first and only phone I've had with frp. Learn something new everyday.
Sent from my SM-N910T3 using Tapatalk

How did you flash the zip via odin?

treysgreen said:
How did you flash the zip via odin?
Click to expand...
Click to collapse
Unzip the zip and flash the .md5 file in odin
Sent from my SM-N910T3 using Tapatalk