Database Develop

looking for a work out case

im looking for a workout arm band for my cdma hero. all i have found is generic ones or ones for icrap. any help or suggestion would be appreciated.

ricersniper said:
im looking for a workout arm band for my cdma hero. all i have found is generic ones or ones for icrap. any help or suggestion would be appreciated.
Click to expand...
Click to collapse
+1
Searched Google for an hour last week and came up with nothing.
Hoping someone had better luck !

i got this for you

i hate myself but i found and bought one at wal-mart. it was 17 bucks. i had tried all the sporting goods and work out equipment places and nothing. finaly, as were are leaving the last place someone says check wal-mart they have them. i feel so dirty!!

ricersniper said:
i hate myself but i found and bought one at wal-mart. it was 17 bucks. i had tried all the sporting goods and work out equipment places and nothing. finaly, as were are leaving the last place someone says check wal-mart they have them. i feel so dirty!!
Click to expand...
Click to collapse
I found a pretty good one at Big 5 Sporting Goods

i got a silicone case off ebay and cut two slits in the back and fed a armband through. works good.
then, you can also wear it backwards with the speaker facing out if you dont wanna deal with headphones.
i bet you could also do it with one of those flexi cases off daydeal.com

I have this one
Works well, fits even with the silicone gel glove on. Also can easily use the screen while in the armband.
Hope that helps someone.

riggsandroid said:
I have this one
Works well, fits even with the silicone gel glove on. Also can easily use the screen while in the armband.
Hope that helps someone.
Click to expand...
Click to collapse
Yep, I have the exact same one. I had bought it for my old mogul and it worked fine. Didn't think I could be able to use the touch screen on the Hero but it reads my finger fine. Although the plastic had been stretched a little from the mogul and so it's a little loose inside but doesn't fall out or anything. Be sure to get the right size for your arm. I got the larger one since i've always had issues with armbands fitting my 24inch pythons. =)

QuiQNeZZ said:
Yep, I have the exact same one. I had bought it for my old mogul and it worked fine. Didn't think I could be able to use the touch screen on the Hero but it reads my finger fine. Although the plastic had been stretched a little from the mogul and so it's a little loose inside but doesn't fall out or anything. Be sure to get the right size for your arm. I got the larger one since i've always had issues with armbands fitting my 24inch pythons. =)
Click to expand...
Click to collapse
lol, you monster! are those registered?

Replacement inner bezel/frame with cutouts for wireless charging

Can we start a discussion around this replacement inner bezel/frame?
http://www.amazon.com/gp/product/B00ACCESKE/
Specifically I'd like to know if this is compatible with SCH-I605, the Verizon wireless variant of SGN2. I've searched for an iFixit teardown or anything else that might show the internal frame on the VZW version but no luck. Anyone have info on this?

m.ocean said:
Can we start a discussion around this replacement inner bezel/frame?
http://www.amazon.com/gp/product/B00ACCESKE/
Specifically I'd like to know if this is compatible with SCH-I605, the Verizon wireless variant of SGN2. I've searched for an iFixit teardown or anything else that might show the internal frame on the VZW version but no luck. Anyone have info on this?
Click to expand...
Click to collapse
Just a thought..
http://www.amazon.com/gp/aw/sp.html?a=B00ACCESKE&s=A22Q0QY5OHFW08
Near the bottom of that (mobile browser) there is a link to contact the seller "IDS Online Shop"
Seems like a good place to start.
I couldn't see why it wouldn't work, given that I believe the dimensions of the VZW Gn2 are the same.

I've thought about this too, the problem is the pins are raised so they make contact with the battery cover, there's already like 3 threads about this
Sent from my SCH-I605 using Tapatalk 2

Brad.S. said:
Just a thought..
http://www.amazon.com/gp/aw/sp.html?a=B00ACCESKE&s=A22Q0QY5OHFW08
Near the bottom of that (mobile browser) there is a link to contact the seller "IDS Online Shop"
Seems like a good place to start.
I couldn't see why it wouldn't work, given that I believe the dimensions of the VZW Gn2 are the same.
Click to expand...
Click to collapse
I reached out to the seller and they state that these ARE compatible. Good news! Will report back when I receive it.
littleguevara said:
I've thought about this too, the problem is the pins are raised so they make contact with the battery cover, there's already like 3 threads about this
Sent from my SCH-I605 using Tapatalk 2
Click to expand...
Click to collapse
You can use a thin rolled strip of copper tape to overcome the fact that the pins aren't raised on the VZW version. The thread on wireless charging mod shows how to do this.

m.ocean said:
I reached out to the seller and they state that these ARE compatible. Good news! Will report back when I receive it.
You can use a thin rolled strip of copper tape to overcome the fact that the pins aren't raised on the VZW version. The thread on wireless charging mod shows how to do this.
Click to expand...
Click to collapse
I'm wondering how did it go...
cause I dropped my verizon SGN2 and that silver frame got chipped so ugly.
I saw all images from ebay and amazon and all of them look different with mine.

mark729 said:
I'm wondering how did it go...
cause I dropped my verizon SGN2 and that silver frame got chipped so ugly.
I saw all images from ebay and amazon and all of them look different with mine.
Click to expand...
Click to collapse
Same here! I dropped my SGN2 and the silver bezel look awful. Ive been trying to hide it using covers but I would really like to replace it. Ive contacted many suppliers in my country, the only solution was to replace the bezel and the screen all together. That would cost me around 300 $s. Any other solutions?

Any luck OP? I want wireless charging in my Note 2 :fingers-crossed:

[/COLOR]
Chahine said:
Same here! I dropped my SGN2 and the silver bezel look awful. Ive been trying to hide it using covers but I would really like to replace it. Ive contacted many suppliers in my country, the only solution was to replace the bezel and the screen all together. That would cost me around 300 $s. Any other solutions?
Click to expand...
Click to collapse
http://www.etradesupply.com/oem-samsung-galaxy-note-ii-sch-i605-rear-housing.html
I bought this. Just silver frame.
Have not replaced yet but looks same as verizon one.

Check out this thread!
http://forum.xda-developers.com/showthread.php?t=2102920
Sent from my SGH-T889 using xda premium

Replacement Housing and Tutorial

So, like many, while having one of my slim cases on that do not cover the top or bottom portions of the phone, I dropped the phone on concrete. My phone was in a loose jacket pocket, and yeah you can figure out the rest, lol. I ended up scratching the top corner by the antenna, and the silver finish became white.
I did some research and found replacement parts and a youtube tutuorial that does a great job on explaining how to easily fix the housing yourself. You can order from tvcmall or ebay (i ordered from tvc due to quicker shipping, and it arrived perfectly on time with full bubble wrap and packaged correctly in pristine condition). I hope this helps anyone with similar situations like mine .
Links for parts:
1) tvcmall: http://www.tvc-mall.com/details/Bac...ng-Galaxy-Note-II-N7100-White-SAMH-N7100-51A/
2) ebay: http://www.ebay.com/itm/Orignal-Ful...404586?pt=PDA_Accessories&hash=item1c2c2fa66a
Feel free to post other links for better prices/options. These are ones that i know are safe/reputable.
YouTube Tutorial for housing repair:
http://www.youtube.com/watch?v=ArgxwyogunE

Have you used that housing? Says it's for the international version. I bought one that is specifically for our version and it worked perfectly. I think all the housing for different carriers/international are different.
http://www.ebay.com/itm/OEM-T-Mobile-Samsung-Galaxy-Note-2-II-T889-Housing-Chassis-Frame-Bezel-Titanium-/190795221331?pt=LH_DefaultDomain_0&hash=item2c6c480953

jbreeze228 said:
Have you used that housing? Says it's for the international version.I bought one that is specifically for our version and it worked perfectly. I think all the housing for different carriers/international are different.
http://www.ebay.com/itm/OEM-T-Mobile-Samsung-Galaxy-Note-2-II-T889-Housing-Chassis-Frame-Bezel-Titanium-/190795221331?pt=LH_DefaultDomain_0&hash=item2c6c480953
Click to expand...
Click to collapse
Not yet. I'm going to buy a 00 screwdriver today from target. I'll update this post once I do.
Your link has tmobile unit. I have at&t. Are they identical?

opasha said:
Not yet. I'm going to buy a 00 screwdriver today from target. I'll update this post once I do.
Your link has tmobile unit. I have at&t. Are they identical?
Click to expand...
Click to collapse
My bad dude! I keep forgetting that the accessories thread is for every version of the Note 2. Hmm I think every version is different. Try to find one for AT&T model. I actually ordered a tool kit off Ebay so I could separate the housing/bezel from the screen. It only took 15 min, super easy to do.

Bought this snap cover from ebay

Comes in multiple colors. Seller is awesome. Should protect against scratches from bumps and the problem areas of the watch. It wasn't as bulky as I thought. I got the black one. He sent me a white glow in the dark one because of a shipping delay of no fault of his. The white one wasnt my cup of tea but the black rocks. You do have to remove it to charge. It clips on pretty good. Im surprised i havent seen it mentioned here with all the sanding and such. The groves are not nearly as pronounced as the picture shows. Mine was smoother which i liked. Great with a screen protector for scratch protection. Hopefully the picture uploads otherwise his ebay name is archer28.

One more real picture. sorry about the second post

Thanks for sharing. What a coincidence. I was just searching for something similar and I found this post.
Could you pls share the ebay link?
Cheers.

i found him by typing in lg g watch r case on ebay. his name is archer28. he said he would be listing more next week. tell him Jeremiah sent you. i thought it was a great idea so we were chating back and forth a bit. great guy. said he was taking a break this week. i told him i was gonna post on xda so im sure more will be listed. large range of colors also

It's 3D printed, possibly designed by himself.
My only gripe is that you gotta remove it before charging. I can see me doing that each time I come home from work.
It's not on his eBay yet, but I'm eager to purchase it if the price is right

it was under 10 bucks. i think for me its more of an accessory where i wouldnt always use it but its perfect for those times where you would be hesitant to wear the watch or worry about it because of it getting damaged. its really easy to remove so its really not a big deal to remove before charging. keep checking next week or drop him a quick email through ebay. im positive more are coming and he took a break this week

bckrupps said:
it was under 10 bucks. i think for me its more of an accessory where i wouldnt always use it but its perfect for those times where you would be hesitant to wear the watch or worry about it because of it getting damaged. its really easy to remove so its really not a big deal to remove before charging. keep checking next week or drop him a quick email through ebay. im positive more are coming and he took a break this week
Click to expand...
Click to collapse
BTW he just made another run of black covers.
=)

Any pics of the bottom of the watch with cover on?
Sent from my SM-T700 using Tapatalk

Yea i use the cover all the time with no damage to the watch yet with it on. i just snap it off to charge. it isnt perfect but a pretty darn good solution. i dont want to sand mine or damage it while it has a warranty. eventually if they do a holiday sale i may get the huawei watch.

ive got 2 of these for a 360 great fit and protection
have 3 coming for the gwatch r
guys in VA like mysef

Any sellers anywhere??
Sent from my HUAWEI MT7-L09 using Tapatalk

You could try to reach out to him and see when the next run is: http://www.ebay.com/usr/archer28

I been buying these from him for a while now ordered 3 so far because I keep losing them there great tho and great price! His father just died tho so he shut down for a while an eBay message he sent me said. hopefully he comes back because he is the only guy with this on eBay right now with watch covers.

Just bought this idk how a owner of this watch could live without this .. Seller was even nice enough to send me a red one .. Must buy

bckrupps said:
Comes in multiple colors. Seller is awesome. Should protect against scratches from bumps and the problem areas of the watch. It wasn't as bulky as I thought. I got the black one. He sent me a white glow in the dark one because of a shipping delay of no fault of his. The white one wasnt my cup of tea but the black rocks. You do have to remove it to charge. It clips on pretty good. Im surprised i havent seen it mentioned here with all the sanding and such. The groves are not nearly as pronounced as the picture shows. Mine was smoother which i liked. Great with a screen protector for scratch protection. Hopefully the picture uploads otherwise his ebay name is archer28.
Click to expand...
Click to collapse
I agree. I got the orange one and found a strap band and watch face to match.

Is possible buy a cover? Because in eBay its ended?
Sent from my Nexus 7 using XDA-Developers mobile app

steveb05 said:
I agree. I got the orange one and found a strap band and watch face to match.
Click to expand...
Click to collapse
That looks awesome!

Replacement Parts for Back Cover

In a nutshell I have this today:
It's my first day with my phone. I cannot use any case because in my country (Turkey) it's impossible to find any cases. I bought some but they will be delivered at least 1 month ago.
So is there any-where to find a replacement part for my back cover? I asked it to Oneplus itself but they told me that they don't sell spare parts. I looked into ebay but there's not any of it.
I know it's not a big thing but I have a big OCD problem. And it looks like a disaster to me.
ANy help will be appreciated.

I've seen many parts on eBay for OnePlus 3 but no replacement back cover yet. They have everything else though like front glass, vibration motor, battery, antenna, speaker, camera cable.

kamajikaciya said:
In a nutshell I have this today:
It's my first day with my phone. I cannot use any case because in my country (Turkey) it's impossible to find any cases. I bought some but they will be delivered at least 1 month ago.
So is there any-where to find a replacement part for my back cover? I asked it to Oneplus itself but they told me that they don't sell spare parts. I looked into ebay but there's not any of it.
I know it's not a big thing but I have a big OCD problem. And it looks like a disaster to me.
ANy help will be appreciated.
Click to expand...
Click to collapse
Ouch, I feel your pain dude.. I would suggest maybe covering it up with a skin for the time being and when they do start making replacement backings eventually, get one then..

two months ago, seen at Aliexpress, price was around 70$, but now item is not available. Just contact with CS and ask how much they will charge for back housing replacement at RMA.

https://dbrand.com/shop/oneplus-3-skins
Try one of these in the meanwhile. I'm sure you'll find a combination that suits your style!

kamajikaciya said:
In a nutshell I have this today:
It's my first day with my phone. I cannot use any case because in my country (Turkey) it's impossible to find any cases. I bought some but they will be delivered at least 1 month ago.
So is there any-where to find a replacement part for my back cover? I asked it to Oneplus itself but they told me that they don't sell spare parts. I looked into ebay but there's not any of it.
I know it's not a big thing but I have a big OCD problem. And it looks like a disaster to me.
ANy help will be appreciated.
Click to expand...
Click to collapse
Im sure trying to replace it on your own will cause more damage to the device because you can mess up adhesives, screen, other internals & etc
And when they say they dont sell parts it means you will endup with a cheaper manufactured backcover that is not even original. Just keep the device as it is those two dots shouldnt bother you

I'll bough 2 original cases. I think it will be ok when I get them.
By the way on the teardown videos of OnePLus 3 it looks pretty easy to remove the back cover. No adhesive or something. Just removing the bottom screws will do the job.

Man, i had the absolute same problem. When i unpacked my OP3, the charger fell out of the xox and hit the phone on the absolute same place on the bezel
I sold mine on ebay the other day and ordered a new one.

it's really simple to disassemble op3. two screws, and back cover is removed. no glue, ect.

http://www.ebay.it/itm/252638839784?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1558.l2649

kenzolo said:
http://www.ebay.it/itm/252638839784?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1558.l2649
Click to expand...
Click to collapse
Thank you but it's not original. It's just a chinese copy.

kamajikaciya said:
Thank you but it's not original. It's just a chinese copy.
Click to expand...
Click to collapse
That's kind of a funny comment as the OEM is a lower cost Chinese company.

nine5raptor said:
That's kind of a funny comment as the OEM is a lower cost Chinese company.
Click to expand...
Click to collapse
I know but it's not original.
On the other hand chinese market produce fake/copy parts for their own companies too.

kamajikaciya said:
I know but it's not original.
On the other hand chinese market produce fake/copy parts for their own companies too.
Click to expand...
Click to collapse
I know I'm late here but how do you guys suggest it would be possible to produce fake back housings at the price they are charging for them? I mean how many people would realistically buy parts exclusively made for one device, and an oneplus 3 at that? A few thousand people at most? If this is the case I don't think it would be financially viable to make any sort of production line for these parts. Aside from stealing original ones from the factory, or mabye defective ones I don't see how they would produce such a limited quantity for so cheap unless they are originals? Any insight?

There are many options for the back cover. The back on my Oneplus 3 was damaged but not as bad as yours. I was planning to replace my back but all i had was a tiny scratch so it wasn't worth it. I will change it when my back is really messed up. When you search for the cover on ebay just search for battery cover You can tell most fakes as they don't have the oneplus logo and for a different colour, try to get one with the sim card tray. Try to get a cover near Hong Kong, Shenzhen and Guangdong that's where the Oneplus headquaters is. There's also a midnight black cover as well!
Original: http://www.ebay.co.uk/itm/Battery-H...305502?hash=item3ae2de09de:g:E9UAAOSww9xZAyjH
Midnight black: http://www.ebay.co.uk/itm/Originl-M...hash=item4664c8bbfe:m:mpSJfaO-1rrmkP-ULb3a6Tg