Related
I've recently got on Xplore 1.1 and started upgrading my phone. By the looks of it, an O2 XDA Trion seems to be unlikely (availability and also some new developments) to reach my hands. I am considering getting a replacement fascia from eBay but am not sure which I should get and why. My phone works very well with the exception that the stylus is falling out (fixed temporarily by using the paper bag trick) and a few falls left the fascia chipped and scratched. The primary D-pad,call keys and soft keys seem a little dirty but they don't look too bad.
I am looking at this full housing which is at 40 pounds, and this A-grade (does this mean brand new or what?) housing without the d-pad and surrounding keys for almost 30 pounds.
Truthfully, I don't want to spend a lot but I am hesitant to send my device back as it works a treat (ht545 G3 unit so I doubt 4GB SD works but I never actually filled an entire GB so at worst I might get a San Disk High Speed 2GB mini SD later on). I am also intending to obtain a full Invisible shield for the wizard as it seems to be damn near impossible to find a black silicone case for the wizard (without the unbreakable screen cover; I just want to slap on a brando protector like the one I have on now).
So which of those two should I get and what the hell is A-grade?
I Bought a dummy wizard phone for 10$,
It worked just fine, all the part are exctly the same....
(i bought it from ebay , so try to have a look....)
good luck
Tom
Well that's a great idea but what do you call them exactly? I can't find such things?
AsGF2MX said:
Well that's a great idea but what do you call them exactly? I can't find such things?
Click to expand...
Click to collapse
Yep they are called exactly that - Dummy Phones
Granted this is on the ebay us site, but it may help you out. They are cheap so maybe it would be less een with shipping than buying from a shop in the uk.
http://search.ebay.com/search/search.dll?from=R40&satitle=mda+dummy&category0=
jimmymotek said:
I Bought a dummy wizard phone for 10$,
It worked just fine, all the part are exctly the same....
(i bought it from ebay , so try to have a look....)
good luck
Tom
Click to expand...
Click to collapse
Good idea but I think the housing of a dummy is glued. If not, then i would be interested on buying a HTC Wizard dummy (I dont like the cingular )
WizeMan said:
Good idea but I think the housing of a dummy is glued. If not, then i would be interested on buying a HTC Wizard dummy (I dont like the cingular )
Click to expand...
Click to collapse
I bought a dummy phone thinking I'd be able to use the housing. Unfortunately I was wrong. There are numerous reasons why the one I've got wouldn't work: it's glued, but buttons don't all work, the mini-SD slot isn't cut through, etc.
If anyone would like the one I wasted my money on and you're willing to pay postage let me know.
Well, this morning I was searching for dummy phones and the only one I found was in Germany for around 30 Euros...thanks for the heads up that it won't work; you just save me from a major headache.
So once again, it boils down to the question which of those two I originally linked would be worth it (I sure as hell have no idea what A-grade means...should I ask the seller or...)?
A-Grade probably means premium quality...
WizeMan said:
A-Grade probably means premium quality...
Click to expand...
Click to collapse
Well that item is actually gone and I found these two off eBay as well...
this for around 28 pounds - original O2 Housing (says "EXCELLENT CONDITION ALL ROUND. LIKE BRAND NEW" so probably not brand new).
this for around 29 pounds which looks like a fake or at least is missing the O2 logo and is said to be 95% new (What's that mean?)
I don't have a T6 which the second one comes with and the first guy will throw in for an extra 2.99 - making both approximately the same price. So is the saving of 10 pounds, when compared with the brand new housing listed earlier, worth it?
Also found this keypad (d pad, soft key, call key and email) for another 10 pounds almost but as I only have one little ding...I doubt I need it.
EDIT: After a lot of thought, I am going to order from the guy above who has the XDA mini S cover (with O2 logo) and toss in 2.99 for the T6 screw driver as well). I am also going to get the black silicone case with that unbreakable cover. I just hope I'm making a good investment. As all in all, it'll cost me around 40 pounds (with the protector and all).
Now the only thing bugging me is how do I transfer the stickers and warranty labels cleanly?
OK then,
I was going to get a new housing for my sad looking Ameo. They come in the standard Ameo silver or a rather smart HTC black. I already have a silver case, but here is the question.
Do the black housings, wear, scratch, or paint rub away easy? I don't want to get one and find it looks crap after six months. They ain't cheap! before anyone else says it, I know it depends how you treat it. I'm on about normal wear and tear use. How does yours look now? are there any signs of the metal underneath showing?
Regards
Jay
Black Case On The "advantage"...
Hey Jay,
I have a HTC Advantage x7501, with the black case of course, and have been using it with "typical" every-day use now for about 6 months. I have never even seen one of the silver cased "Ameo" versions of the device in person, so my review is a bit "one-sided," if you will... Also, I have a friend with whom I work with that also owns the same model as I. With saying all that, and without having experienced the silver model, I would bet the silver model would hold up a bit better on the finish due to the fact that if the silver gets scratched, the metal beneath it looks much closer to the silver finish than the black. I have a couple small blemishes on mine, and I am very particular with my mobile devices, but after using day-by-day at work and home, it has managed to get marked up just a bit. The biggest problem is, if you get a scratch on it, the metal below sticks out "like a sore thumb!"
I definitely believe that the black finish is a bit more professional looking, where sometimes the silver finishes can make a device look cheap or make it stand out.
Anyways, to give you my honest account on TWO Advantage x7501 devices (black finish) after 6 or so months of daily use, it is overall good, and neither one shows any major signs of wearing finish. Also, we both use a case that the device "slides" tightly in and out of each time you use it (without the keyboard attatched), and the device really hasn't shown any real signs of wear on the sides where it rubs the case. However, if you do happen to mark it up in any way, you will definitely notice it. Again, I am very picky, so keep that in mind, but so you have a better idea of what I am saying, I attatched a couple of pics so you can see what it looks like when or if you do scratch or mark it.
HOPE THIS HELPS!!!
-Ryan
Also Note: Only one of the devices I wrote about is pictured, but are very similar in condition, and were both purchased slightly used.
X7501 Cosmetics...
I have had my X7501 for almost 10 months now and it only has one very tiny mark on the top right corner (you have to look hard to even see it).
Since I'm also very particular about my devices (I always keep them looking new) I just used a Sharpie (permanent marking pen) to "erase" the offending mark. This works great and I would recommend it to anyone wanting to touch-up black anodized aluminum like the Athena housing.
Wow! thanks for the reply Guys, Ryan that was one hell of a reply. Must have took you a while to do that and I appreciate it. toyfreak, the idea with the marker pen is a great one. I think on just that idea alone I will get black. Its harder to touch up silver! It looks better too.
Regards
Jay
Indeed is surprisingly hard coating, I carry mine in my pockets and can't say I'm careful with it, rather the opposite, I have it since it came out and there is only a little wear in one of the corners, hardly noticeable, where the scratches are more visible, is on the silver border next to the screen, not that it look bad or anything.
Black housing - Where?
I would like to know where you can buy a black housing for your Ameo, mine needs a new one as well!
And what about your keyboard, can you get a black one too?
/HM
Silver / AMEO
Hi guys,
Proud owner of a wonderful brick since 6 months in grey color I should say that if I new I would have choosen a different color.
The grey AMEO housing is far from being "time resistant"...
Since few weeks the "video camera" around the front cam as disappeared and the "Alert" will soon do the same.
I allways take good care of my stuf and I'am bit disapointed for a 1.000 bucks machine to see it !
hmeyer said:
I would like to know where you can buy a black housing for your Ameo, mine needs a new one as well!
And what about your keyboard, can you get a black one too?
/HM
Click to expand...
Click to collapse
They are available on ebay, if you search athena case you should find them. any problems then let me know. There is a guy who does spares on there and he has them in black or Silver.
regards
Jay
Hi,
Just a quick update on the new housing. It's arrived, and I put it on. It looks great, so glad I got black. Thanks to those who took the trouble to answer this post so well.
If anyone needs a new housing for their device then let me know and I will let you know where to get them from. He claims to have a few left!
regards
Jay
responderman said:
Hi,
Just a quick update on the new housing. It's arrived, and I put it on. It looks great, so glad I got black. Thanks to those who took the trouble to answer this post so well.
If anyone needs a new housing for their device then let me know and I will let you know where to get them from. He claims to have a few left!
regards
Jay
Click to expand...
Click to collapse
I'm looking for a new housing, for the X7501 not the 7500. Please advise me where to find one.
tootallk2000 said:
I'm looking for a new housing, for the X7501 not the 7500. Please advise me where to find one.
Click to expand...
Click to collapse
Forgive my ignorance, What is the difference?
Jay
responderman said:
Forgive my ignorance, What is the difference?
Jay
Click to expand...
Click to collapse
The X7501 does not have the internal or 2nd camera, the X7500 does. So I would have a big hole in my unit if I used that one. I don't know if the inside layout is any different but that's the only visible thing on the external end.
I need a new housing too.
Anychance you could PM me a link or contact for this.
Thanks in advance.
tootallk2000 said:
The X7501 does not have the internal or 2nd camera, the X7500 does. So I would have a big hole in my unit if I used that one. I don't know if the inside layout is any different but that's the only visible thing on the external end.
Click to expand...
Click to collapse
7501 does have 2 cams. the 7510 doesnt
goodluckje said:
7501 does have 2 cams. the 7510 doesnt
Click to expand...
Click to collapse
LMAO dude have you been drinking? The 7501 has 1 camera and the 7500 and the 7510 has 2. I own the 7501 which is also cheaper than the 7500. I suggest you google them and you'll see the difference.
tootallk is correct. 7501 has 1.
back to the subjct of cases. i got the nutshell case mentioned elsewhere in this forum. definitely woth the money... and the wait. beautiful case and funtional.
wgary said:
back to the subjct of cases. i got the nutshell case mentioned elsewhere in this forum. definitely woth the money... and the wait. beautiful case and funtional.
Click to expand...
Click to collapse
hi
you are talking about a extra case to protect the athena right?, the thread is about replacing the cover / housing of the athena itself, a step that becomes nesesary when you not use case like your nutshell .
anyhow (and to really come back to subject ) i have to replace my housing too and wonder, why nobody can simply post the web/email adress of a reseller here?. i searched alot now an only find companies in asia and prices 'far away from reality', so if someone know a good reseler please post here.
thanks mad
madbird said:
hi
you are talking about a extra case to protect the athena right?, the thread is about replacing the cover / housing of the athena itself, a step that becomes nesesary when you not use case like your nutshell .
anyhow (and to really come back to subject ) i have to replace my housing too and wonder, why nobody can simply post the web/email adress of a reseller here?. i searched alot now an only find companies in asia and prices 'far away from reality', so if someone know a good reseler please post here.
thanks mad
Click to expand...
Click to collapse
oops my bad.
madbird said:
hi
you are talking about a extra case to protect the athena right?, the thread is about replacing the cover / housing of the athena itself, a step that becomes nesesary when you not use case like your nutshell .
anyhow (and to really come back to subject ) i have to replace my housing too and wonder, why nobody can simply post the web/email adress of a reseller here?. i searched alot now an only find companies in asia and prices 'far away from reality', so if someone know a good reseler please post here.
thanks mad
Click to expand...
Click to collapse
Here you go,
http://search.stores.ebay.co.uk/sk-...shopQQfsooZ1QQfsopZ1QQsaselZ239115870QQsofpZ0
Not cheap though!
Jay
P.S if im in trouble "Madbird" made me do it
Hey all! I just wanted to share what I found. Not to sure if anyone found this and or mentioned it here somewhere. I looked around and saw another post asking about it. But thats all I saw. I am not sure how easy it is to dis-assemble the device and or how well the housing varies with hardware. I changed my T-Mobile Wing into the HTC 4520 with housing replacement, yes they were the exact same hardware wise yet some components were off some how. I had changed more then a few others that wanted the HTC branded housing and same so idk. I'm going to order one of these soon so i will share with pics of my experience unless someone does it first. Here you all go.
http://www.truesupplier.com/_search.php?page=1&q=htc+magic
ps: trackballs too!!!!!!!!
Nice! Too bad the custom ones are ugly as hell
Nice I was JUST looking for housings. Thanks for the heads up!
Just in case you guys aren't aware, 32A and 32B motherboards are different, so a HTC Magic housing will not fit a MyTouch, and vice versa.
masr1979 said:
Just in case you guys aren't aware, 32A and 32B motherboards are different, so a HTC Magic housing will not fit a MyTouch, and vice versa.
Click to expand...
Click to collapse
ya i had a feeling about this. but i think im still gonna try and see what needs to be modded. you never know, htc might have made the molds the same so they dont lose on machining time. like i said in op my wing and the 4520 were off by just a lil but i still got it to work 100%. I only had to switch out the keyboards so i bet this will probably work. I will get it and try it out for mt3g users.
iPhone iWing said:
ya i had a feeling about this. but i think im still gonna try and see what needs to be modded. you never know, htc might have made the molds the same so they dont lose on machining time. like i said in op my wing and the 4520 were off by just a lil but i still got it to work 100%. I only had to switch out the keyboards so i bet this will probably work. I will get it and try it out for mt3g users.
Click to expand...
Click to collapse
I'm speaking from personal experience. I bought a G2 case from ebay, and the case has some holes on the opposite side of where the MyTouch case has them. I ordered a second one and had to return it because despite asking the seller in advance if it indeed was for a MyTouch and not an HTC branded phone they didn't have the right one. I've seen recently that some have started popping out on ebay that state "will fit US models" or something to that effect, these should be safe. My advice is to ask before you buy if it will fit a T-Mobile MyTouch, and what happens if it doesn't fit after you order it.
yep i can confirm. the thickness is different. but i managed to match them i have a 32a front and back pannel (black). And 32b middle section (silver UK Vodafone stock). This works just fine. Otherwise your vibration motor will never work since it is to tight.
zmesler said:
yep i can confirm. the thickness is different. but i managed to match them i have a 32a front and back pannel (black). And 32b middle section (silver UK Vodafone stock). This works just fine. Otherwise your vibration motor will never work since it is to tight.
Click to expand...
Click to collapse
I double that, I just figuered that out the other day while I was trying to change the housing for my magic.
I was wondering if anyone has found a source for a housing replacement that will automatically fit the 32B? I am in search of one and can't seem to find one. I found some that say mytouch compatible but I think they will have the same issue as mentioned here about being different on the inside.
Thanks.
typedink said:
I was wondering if anyone has found a source for a housing replacement that will automatically fit the 32B? I am in search of one and can't seem to find one. I found some that say mytouch compatible but I think they will have the same issue as mentioned here about being different on the inside.
Thanks.
Click to expand...
Click to collapse
Same here. In need of a new housing. There must be SOMEWHERE we can get one. Anyone? Help!
Temporarily said:
Same here. In need of a new housing. There must be SOMEWHERE we can get one. Anyone? Help!
Click to expand...
Click to collapse
I'm also looking for a housing that will be compatible with my MT3G, it looks pretty banged up.
yea the housings cause vibrator problems.
I bring great news, I e-mailed cnn.cn asking when they will have MT3G housings in stock and they replied saying they should have it in stock in early march.
iPhone iWing said:
Hey all! I just wanted to share what I found. Not to sure if anyone found this and or mentioned it here somewhere. I looked around and saw another post asking about it. But thats all I saw. I am not sure how easy it is to dis-assemble the device and or how well the housing varies with hardware. I changed my T-Mobile Wing into the HTC 4520 with housing replacement, yes they were the exact same hardware wise yet some components were off some how. I had changed more then a few others that wanted the HTC branded housing and same so idk. I'm going to order one of these soon so i will share with pics of my experience unless someone does it first. Here you all go.
http://www.truesupplier.com/_search.php?page=1&q=htc+magic
ps: trackballs too!!!!!!!!
Click to expand...
Click to collapse
I bought one of the housings available from the website posted in the OP (and quoted above). The only part of my MT3G that was messed up and scratched was the front face plate, so I didn't bother trying to swap out the rest of the housing. The face plate fits perfectly and looks awesome. The chrome buttons and HTC logo instead of the T-Mobile logo give it a much nicer look. $17 to make my phone look nicer and brand new again is not a bad deal at all.
I'd actually be willing to bet that, with some minor modifications to the middle section of the housing, we could get this entire kit to fit our MT3G's. We'd need to drill a tiny hole for the mic (the one that shipped to me has the mic hole on the opposite side), and perhaps cut away at some of the plastic near the vibration motor to allow it to move freely, but it should work. I might try this if I get bored. I'll let you know if I have any success.
Thanks for posting the site.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=300400807287&ssPageName=STRK:MEWAX:IT
iluvmymytouch said:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=300400807287&ssPageName=STRK:MEWAX:IT
Click to expand...
Click to collapse
I bought from this guy, and he has sent me the wrong size screwdriver. Check out his feedback first, it's not very reassuring.
alliekhat said:
I bought from this guy, and he has sent me the wrong size screwdriver. Check out his feedback first, it's not very reassuring.
Click to expand...
Click to collapse
Other than the screwdrivers, was the housing nice?
KAwAtA said:
Other than the screwdrivers, was the housing nice?
Click to expand...
Click to collapse
It was okay, but just okay. It definitely looks like OEM product, even down to the fact that the HTC branding was tinged blue instead of being silver and the middle chassis part was cracked. I waited 3 weeks for it to arrive in this condition, and I'm still struggling to get a refund from him so I can try another seller. Don't waste your time with him.
I did notice one or two listings on ebay actually do say original not OEM, one in particular from the UK, going to give one of those a try.
alliekhat said:
It was okay, but just okay. It definitely looks like OEM product, even down to the fact that the HTC branding was tinged blue instead of being silver and the middle chassis part was cracked. I waited 3 weeks for it to arrive in this condition, and I'm still struggling to get a refund from him so I can try another seller. Don't waste your time with him.
I did notice one or two listings on ebay actually do say original not OEM, one in particular from the UK, going to give one of those a try.
Click to expand...
Click to collapse
Let us know who you get it from. I dropped mine and there are little chips around the phone, I'd like to replace the housing eventually.
guys I need a housing for my Tmobile Mytouch without 3.5 mm jack ASAP. my back looks like crap, and scratched like hell.
here are 2 different ones from ebay. can you guys tell me if it will fit? I mean the pic does say "tmobile" and I am waiting from the sellers to hit back.
both of em are shipped from hong kong
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=280476103537&ssPageName=ADME:X:RTQ:US:1123
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=290413949633
btw both are similar products but 2 different sellers.
none of those come with screws. and one of them states, I would need existing "screw holes" idk what that means, I believe these "screw holes" are already inside my pre existing housing (stock).
sorry but these guys are foreign sellers and have bad communication skills, most of there responses are half assed.
Hi,
I bought this whrist band on ebay.
http://www.benl.ebay.be/itm/MENS-WA...NT-CLASP-SPEED-MASTER-BRACELET-/201282526154?
The black one 22mm.
It was delivered very fast and it looks very nice. There is just one problem. I can not resize this band. I watched enough tutorials to come to the conclusion that this band has another mechanics.
Is there someone who has a solution,because the seller on ebay tells me that this should fit a normal whrist.
I am 1m87 and the watchband still is 4cm to big???
Thnx
man2u2 said:
Hi,
I bought this whrist band on ebay.
http://www.benl.ebay.be/itm/MENS-WA...NT-CLASP-SPEED-MASTER-BRACELET-/201282526154?
The black one 22mm.
It was delivered very fast and it looks very nice. There is just one problem. I can not resize this band. I watched enough tutorials to come to the conclusion that this band has another mechanics.
Is there someone who has a solution,because the seller on ebay tells me that this should fit a normal whrist.
I am 1m87 and the watchband still is 4cm to big???
Thnx
Click to expand...
Click to collapse
There are pins that can be knocked out to remove links. I can see them in the pictures on the listing...... It's easy. Try again.
You should probably buy a watch strap tool, makes the job much easier, they are quite cheap on eBay or Amazon.
I am gone try with that little machine they are selling.
Thnx
Be careful with that band since I had the same one and the links fell apart. Luckily, I noticed before my watch dropped to the ground. The links that came apart were at the non-adjustable end.
In a nutshell I have this today:
It's my first day with my phone. I cannot use any case because in my country (Turkey) it's impossible to find any cases. I bought some but they will be delivered at least 1 month ago.
So is there any-where to find a replacement part for my back cover? I asked it to Oneplus itself but they told me that they don't sell spare parts. I looked into ebay but there's not any of it.
I know it's not a big thing but I have a big OCD problem. And it looks like a disaster to me.
ANy help will be appreciated.
I've seen many parts on eBay for OnePlus 3 but no replacement back cover yet. They have everything else though like front glass, vibration motor, battery, antenna, speaker, camera cable.
kamajikaciya said:
In a nutshell I have this today:
It's my first day with my phone. I cannot use any case because in my country (Turkey) it's impossible to find any cases. I bought some but they will be delivered at least 1 month ago.
So is there any-where to find a replacement part for my back cover? I asked it to Oneplus itself but they told me that they don't sell spare parts. I looked into ebay but there's not any of it.
I know it's not a big thing but I have a big OCD problem. And it looks like a disaster to me.
ANy help will be appreciated.
Click to expand...
Click to collapse
Ouch, I feel your pain dude.. I would suggest maybe covering it up with a skin for the time being and when they do start making replacement backings eventually, get one then..
two months ago, seen at Aliexpress, price was around 70$, but now item is not available. Just contact with CS and ask how much they will charge for back housing replacement at RMA.
https://dbrand.com/shop/oneplus-3-skins
Try one of these in the meanwhile. I'm sure you'll find a combination that suits your style!
kamajikaciya said:
In a nutshell I have this today:
It's my first day with my phone. I cannot use any case because in my country (Turkey) it's impossible to find any cases. I bought some but they will be delivered at least 1 month ago.
So is there any-where to find a replacement part for my back cover? I asked it to Oneplus itself but they told me that they don't sell spare parts. I looked into ebay but there's not any of it.
I know it's not a big thing but I have a big OCD problem. And it looks like a disaster to me.
ANy help will be appreciated.
Click to expand...
Click to collapse
Im sure trying to replace it on your own will cause more damage to the device because you can mess up adhesives, screen, other internals & etc
And when they say they dont sell parts it means you will endup with a cheaper manufactured backcover that is not even original. Just keep the device as it is those two dots shouldnt bother you
I'll bough 2 original cases. I think it will be ok when I get them.
By the way on the teardown videos of OnePLus 3 it looks pretty easy to remove the back cover. No adhesive or something. Just removing the bottom screws will do the job.
Man, i had the absolute same problem. When i unpacked my OP3, the charger fell out of the xox and hit the phone on the absolute same place on the bezel
I sold mine on ebay the other day and ordered a new one.
it's really simple to disassemble op3. two screws, and back cover is removed. no glue, ect.
http://www.ebay.it/itm/252638839784?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1558.l2649
kenzolo said:
http://www.ebay.it/itm/252638839784?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1558.l2649
Click to expand...
Click to collapse
Thank you but it's not original. It's just a chinese copy.
kamajikaciya said:
Thank you but it's not original. It's just a chinese copy.
Click to expand...
Click to collapse
That's kind of a funny comment as the OEM is a lower cost Chinese company.
nine5raptor said:
That's kind of a funny comment as the OEM is a lower cost Chinese company.
Click to expand...
Click to collapse
I know but it's not original.
On the other hand chinese market produce fake/copy parts for their own companies too.
kamajikaciya said:
I know but it's not original.
On the other hand chinese market produce fake/copy parts for their own companies too.
Click to expand...
Click to collapse
I know I'm late here but how do you guys suggest it would be possible to produce fake back housings at the price they are charging for them? I mean how many people would realistically buy parts exclusively made for one device, and an oneplus 3 at that? A few thousand people at most? If this is the case I don't think it would be financially viable to make any sort of production line for these parts. Aside from stealing original ones from the factory, or mabye defective ones I don't see how they would produce such a limited quantity for so cheap unless they are originals? Any insight?
There are many options for the back cover. The back on my Oneplus 3 was damaged but not as bad as yours. I was planning to replace my back but all i had was a tiny scratch so it wasn't worth it. I will change it when my back is really messed up. When you search for the cover on ebay just search for battery cover You can tell most fakes as they don't have the oneplus logo and for a different colour, try to get one with the sim card tray. Try to get a cover near Hong Kong, Shenzhen and Guangdong that's where the Oneplus headquaters is. There's also a midnight black cover as well!
Original: http://www.ebay.co.uk/itm/Battery-H...305502?hash=item3ae2de09de:g:E9UAAOSww9xZAyjH
Midnight black: http://www.ebay.co.uk/itm/Originl-M...hash=item4664c8bbfe:m:mpSJfaO-1rrmkP-ULb3a6Tg