First of all, I tried to search, and google for this problem, but couldn't find the solution, so here it is..... I rooted my phone. Installed Froyo 2.2 OS. Today I tried to download the beta mozilla firefox from their site mozilla [dot]com/en-US/m/beta, and after I downloaded, i tried to install, and got the following error message. for security your phone is set to block installation of applications not obtained from android market. When I googled this error, I came across that the Service Provider is blocking it. I rooted initially, so shouldn't I be free? Or do I have to root the phone again after installing Froyo 2.2? I'd appreciate all the help. Thank you!
i think i might've found the solution, that the phone needs to be rooted again. the link where i found is forum.xda-developers[dot]/showthread.php?t=797397[/url] it says "Browse to contents from cmd/terminal". How do i get there? Is it pressing vol buttons, and pressing the power button at the same time?
You need to allow access for third party apps to be installed.
Read through this.
There is reports on the internet of Tango rolling out on AT&T - can anyone confirm this? I used the cab sender method so of course when I check for an update, it says my phone is on the latest version 7.10.8773. However, there is Samsung firmware bundled with the A&T firmware - does anyone know what it does? Does it fix the hanging wireless driver, does it break interop-unlock, does it fix the issue when powering on the screen sometimes?
If anyone could capture the update via wireshark and give me a link to download and install, that would be great I mean.. unless it breaks interop-unlock, in which case I don't give a **** about it.
Thanks,
6-4
the most recent update from ATT is still @ 7.10.7720
This is the Samsung update..
www.download.windowsupdate.com/msdo..._7c77306f9c299d47b491ac080855febbd68c0ccf.cab
did you try installing the firmware did the firmware relock ur phone?
Sorry - yes, I installed the firmware and there was no negative repercussions, worked flawlessly.
Sent from my SGH-i937 using XDA Windows Phone 7 App
you have to apply the prevent relock xap that jaxbox has on his windowsphonehacker website if you want to keep interop unlock if you apply the samsung update. Thats how im still interop unlocked, with tango and the samsung firmwae update which fixed the keyboard lag. i made a back up before i applied the samsung update just in case so i would do the same if i were you.
thanks, did the firmware update already. i have applied the prevent lock xap before doing the firmware update i kept a backup also just in case. works great and kept my interop unlocked.
One thing ive notice, before the fw update i can only play/pause/volume up, now everything are working including the next/previous track clicks controls.
Wow scratch that. My phone called home and now half my homebrew apps won't launch.. apparently reflashing is the only way to fix this? Great. Stock roms for the focus s aren't even available.. ****.
Sent from my SGH-i937 using XDA Windows Phone 7 App
actually my focus s was relock after the tango update and deleted some of my sideloaded apps after launching them. i did apply windowbreak again then deployed the prevent relock xap and finally applied the fw update. hopefully it will remain unlock.
BryG0427 said:
actually my focus s was relock after the tango update and deleted some of my sideloaded apps after launching them. i did apply windowbreak again then deployed the prevent relock xap and finally applied the fw update. hopefully it will remain unlock.
Click to expand...
Click to collapse
Lucky you - I neglected to read the info about preventing the relocking, I just figured it would happen as soon as I installed the cab. What to do, what to do..
My GF's Focus S on AT&T has been giving an update notice for a couple days. Finally plugged it into Zune and the update failed. I previously force updated to 8107 for VVM support. Hopefully someone will release the cab file to upload in the forced state, as I'm guessing many people didn the force update.
64GUNSHIP said:
This is the Samsung update..
www.download.windowsupdate.com/msdo..._7c77306f9c299d47b491ac080855febbd68c0ccf.cab
Click to expand...
Click to collapse
spokanedj said:
My GF's Focus S on AT&T has been giving an update notice for a couple days. Finally plugged it into Zune and the update failed. I previously force updated to 8107 for VVM support. Hopefully someone will release the cab file to upload in the forced state, as I'm guessing many people didn the force update.
Click to expand...
Click to collapse
See the link above. That's the Samsung LE2 firmware update pushed with Tango.
sweet! i used the zune/disconnect trick and got to 8773.
w/o it zune reported i was up to date with 7720
http://www.wpcentral.com/att-sitting-samsung-tango-updates-windows-phone-heres-how-get-now
BryG0427 said:
actually my focus s was relock after the tango update and deleted some of my sideloaded apps after launching them. i did apply windowbreak again then deployed the prevent relock xap and finally applied the fw update. hopefully it will remain unlock.
Click to expand...
Click to collapse
I have the same issue updating by zune. Then I revert to the previous firmware version to recover the interop unlock and then I deployed the prevent relock xap but then you said you applied the firmware update. How do you apply the new firmware update? ussing zune?
sorry, i think i missed something here, has anyone applied the LE2 samsung OEM update that is shipped out with Tango and noticed if you can no longer use diagnostic tool to apply updates?
my phones still not arrived yet but surely updates can be done as following, please correct me if im wrong, ive been kinda used to the HD2 for years...
unlock
backup (A) (keep copy)
cab OS update
unlock if needed
backup (B) (keep copy)
apply OEM (LE2) update
at this point you should have an unlocked device but are unable to re unlock it if needed, but do benifit from newer drivers etc.
To update to the next OS or enable unlocking you
restore the backup of that same OS version BUT without the OEM update (backup B)
apply the next CAB OS update,
unlock it,
backup again (B) (keep copy),
apply next CAB OEM update
essentially for every OS update you revert your OS to the backuped up version without the OEM update allowing you do mod it after you cab update the OS.
unless we can install our own certs and make our own OEM update minus all the crap we dont need....
Yippikaye said:
I have the same issue updating by zune. Then I revert to the previous firmware version to recover the interop unlock and then I deployed the prevent relock xap but then you said you applied the firmware update. How do you apply the new firmware update? ussing zune?
Click to expand...
Click to collapse
I have applied the fw update manually thru cab sender (did not used zune software).
Hi Guys,
I updated with the cab from 64GUNSHIP my samsung focus S but now is always rebooting.
I can't syncronize the mobile phone to restore the backup.
Can you help me?
Edit: Finally I can't restore with Zune pushing turn on button and camera button from the mobile phone, finally I restore with the Zune application.
Hey! I used cab sender for my Focus S, updated to Tango and now in Zune there's the Samsung update :victory: updated with no problems :good: solved many fixes like the keyboard, and sound
Has anyone been able to use internet sharing after applying the fw update through cab sender? I'm not on ATT and get the generic message to call 611 to enable it...
If I roll back to tango it's fine...Definitely still interop unlocked as all my sideloaded apps still work.
jess6217 said:
Has anyone been able to use internet sharing after applying the fw update through cab sender? I'm not on ATT and get the generic message to call 611 to enable it...
If I roll back to tango it's fine...Definitely still interop unlocked as all my sideloaded apps still work.
Click to expand...
Click to collapse
I lost my interop w/o backup after doing the updates, mine doesn't let me use internet sharing anymore either. However, using WinTT (http://forum.xda-developers.com/showthread.php?t=1587332) you can enable it with default settings on any interop/rooted handset.:laugh:
Hey, few weeks ago i had an upgrade to EMUI 5.0 on my EVA-LO9 P9. Since the update i've lost all the applications like calculator, camera etc etc. Bluetooth was not workign aswell. So i checked on forums and i red that i've to do a rollback. I tried but it was stopping at 5% every time giving an unknown error. So after that i did factory reset using volume up and power key button while phone was off. After that i had to configure my phone again but i can't, because i don't have keybord. Only voice keyboard is working and obviously i can't enter my google account using it. So i can't move any files to my P9 from PC and vice versa to try rollback with other files. Can't get access to android at all. Do you guys know what should i do? My phone is semi-bricked right now.
Thanks in advance for a fast answer, i have to get it to work ASAP.
Regards!
Try to install 3rd party keyboard via moboginie... Make sure the developer option and debugging is enabled. Then try the rollback package. It should work then
But the thing is that i can't even enter developer options to enable debugging.. because I cant get past adding a google account to my device. I don't have access to my android at all. I dont have access to my P9 from my PC when i connect it via usb aswell.
pps01 said:
Hey, few weeks ago i had an upgrade to EMUI 5.0 on my EVA-LO9 P9. Since the update i've lost all the applications like calculator, camera etc etc. Bluetooth was not workign aswell. So i checked on forums and i red that i've to do a rollback. I tried but it was stopping at 5% every time giving an unknown error. So after that i did factory reset using volume up and power key button while phone was off. After that i had to configure my phone again but i can't, because i don't have keybord. Only voice keyboard is working and obviously i can't enter my google account using it. So i can't move any files to my P9 from PC and vice versa to try rollback with other files. Can't get access to android at all. Do you guys know what should i do? My phone is semi-bricked right now.
Thanks in advance for a fast answer, i have to get it to work ASAP.
Regards!
Click to expand...
Click to collapse
I had a similar problem today. So I was on EVA-L19C432B383 and wanted to downgrade to EVA-L19C432B378 with dload method.Updated went 100% then a message came up at boot stating storage requires password or something like that. Then I read on a forum to wipe data/factory reset. I did that and the problem with the keyboard appeared(only voice). Flashed like 10 stock roms but didn't manage. SOOO finally after 7 frustrating hours I was able to flash (dload method) the rollback from N to MM update from this link www .stechguide.com/downgrade-huawei-p9-from-android-nougat-to-marshmallow/ the european version (Download Huawei P9 Nougat Rollback Package for EVA-L09 (Europe) it works for L19 also) and then I flashed the rom EVA-L19C432B182. Thank god It was alive again (the rom I downloaded using firmware finder for pc). Hope it helps!
pps01 said:
Hey, few weeks ago i had an upgrade to EMUI 5.0 on my EVA-LO9 P9. Since the update i've lost all the applications like calculator, camera etc etc. Bluetooth was not workign aswell. So i checked on forums and i red that i've to do a rollback. I tried but it was stopping at 5% every time giving an unknown error. So after that i did factory reset using volume up and power key button while phone was off. After that i had to configure my phone again but i can't, because i don't have keybord. Only voice keyboard is working and obviously i can't enter my google account using it. So i can't move any files to my P9 from PC and vice versa to try rollback with other files. Can't get access to android at all. Do you guys know what should i do? My phone is semi-bricked right now.
Thanks in advance for a fast answer, i have to get it to work ASAP.
Regards!
Click to expand...
Click to collapse
you have to flash the data package from my twrp, you just updated the core system.
Could you give me your current build id? (example: L09CxxxBxxx)
this is exactly what happened to my p9+
any solutions? mine is still stuck like this. the only firmware that finished installing is the south east asia but when it optimizes the phone, it fails. and back to nrd90m.
step by step guide on how to fix this please?
Some update was downloaded yesterday and I lost some options like system updates which was next to the about phone option.
Also lost the ability to use themes, every time I select one the theme app just close and nothing changes.
I tried factory reset, and no luck there. Not really sure what else to do. And this is my first (and last) Android phone. Can someone please guide me on fixing these issues?
My device is VTR-L29-C649B170
I've managed to restore my device using the following guide:
stechguide com/download-huawei-p10-nougat-firmware-update/
However, still missing system updates...
Ok, last update.
I've managed to almost fully restore my phone, however, I had to rebrand it to L29C636 instead of the stock I had, I guess there's nothing I can do about that for now. I actually went to a technician and he said there's nothing much to he can do without breaking the warranty, so I did it myself...
I do want to thank Team TM for some guidance, tools and firmware database.
Hi all.
I have an unbranded multimedia device installed in my car.
I know its cheep and old (OS is 4.1.1)
the only thing that can help identify is that on startup it says 'powered by Uzeb'
my problem is that the device is locked and no apps are allowed to be installed
I would like to root it so ill be able to install a newer version and if not than some apps.
problem is I can not find the option to Factory reset.
I am pretty sure that this option is gone or at list hidden from end users.
the company that installed it at first place demands an extra payment to unlock it back.
so Im trying to do it on my own.
For some reason I can't attach a photo
in About option,
there is a Uboot version - v00.01.13
Appreciate any sugestions.
no apps are allowed to be installed
Click to expand...
Click to collapse
Android Auto doesn't work that way - apps get installed on your phone, not on the head unit.
so what am I missing here ?
Its a touch screen mounted inside my car.
it runs on old version android and blocked to end users
who wants to update the OS by themselves or to install different apps (or even update the existing ones)
So this is not Android auto and perhaps im not at the right forum
any suggestions on what else can I do ?