Hi...
I got a Kindle fire HD 7 - tate. I had CM11 (kitkat) running for quite a while now nicely.
Today I decided to upgrade it to CM12.1 - Maybe a fault.
First I flashed TWRP 2.8.3 (previously I had 2.7.0) from xda here. Ok so far. Just it brings some
gibberish on top of the orange "kindle fire" text on boot. But otherwise it seems to work.
I installed CM12.1 nightly from today. Before I did a full wipe in TWRP. Ok so far. It bootet up nicely
in CM. Now I flashed the gapps and rebootet. Ok so far. Everything seemed to work.
But now I maybe made a deadly mistake. I decided to do a factory reset in CM12.1.
(I wanted to make a really fresh and clean install with also running googles first boot wizard).
My KFHD7 shutted down and rebootet. But since now It is stuck in some kind of a loop.
The blue TWRP boot splash appears. Every 2 seconds the screen turns black for a second
then the blue TWRP boot splash comes back and this happens now again and again.
I turned off my tablet by a long press on the power button a couple of times, but it does not help.
Any idea how I can revive my tablet?
Thanks for all your help!
Ok...
I am one step further now. I bought a fastboot cable (not so easy to get in germany)
and flashed twrp 2.7.0.0 using
Code:
fastboot -i 0x1949 flash recovery kfhd7-twrp-2.7.0.0-recovery.img
Than I did a
Code:
fastboot -i 0x1949 -w
to format userdata and cache. Now it boots into my TWRP 2.7.0.0.
Lets see how far I come now....
mine stays on
<waiting for device>
Related
Hi guys,
I was trying to flash the Pac-Man rom onto the new KFHD7 (bought it a week ago). It had Amazon OS 7.4.7 on it.
I was succesful flashing TRWP and bootloader (downgraded to the Amazon OS 7.2.3 bootloader) using the fire flash application as described in this post:
http://forum.xda-developers.com/showthread.php?t=2271909
I then installed the Pac-Man rom and the google apps. Unfortunately sth went wrong and the keyboard was not working at all - every few seconds I was getting a message that the AOSP (android keyboard) stopped working. I tried few things to fix that (like clearing the data and cache for AOSP but that didn't work.
Then I have downloaded the CM ROM for Kindle from this link:
http://forum.xda-developers.com/showthread.php?t=2388341
I have installed it and wiped the data and cache.
That did not work and I got a red text telling me that there was a problem with my Kindle and I should wipe the data and restore it to factory status. I did that and then used KFFirstAide to restore the Kindle from the backup I have taken beforehand.
After the restore I sort of got the system back. Unfortunately I got no applications on the home screen although in the list of installed applications they were there.
So I decided to flash the TRWP and bootloader again (as I lost them doing the restore from backup) as I just wanted to boot into recovery and try to flash another rom (Kinology). I flashed them using fastboot no problem.
Unfortunately once I flashed them and did the "fastboot -i 0x1949 reboot" Kindle stopped playing nice and is looping.
Kindle Fire orange logo appears for about 4-5 seconds and then flickers and kind of restarts and then again orange logo apeears for 4-5 seconds, flickers and just loops like that.
I have already ordered the factory cable but I have a question what do I need to do once it arrives.
Can I go back to stock OS somehow? Where can I get it?
if not then what should I do to unbrick it and flash any rom on it?
thanks in advance
Raf
fastboot -i 0x1949 getvar product
fastboot -i 0x1949 reboot
If the logo doesn't turn blue anymore I would suggest restoring the stock system with kffa and starting over again, though you may have to flash the boot loader again, and if you do check the md5sum of the download before flashing it to avoid a hard brick.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Hi!!
Rabarbar said:
Hi guys,
I was trying to flash the Pac-Man rom onto the new KFHD7 (bought it a week ago). It had Amazon OS 7.4.7 on it.
I was succesful flashing TRWP and bootloader (downgraded to the Amazon OS 7.2.3 bootloader) using the fire flash application as described in this post:
http://forum.xda-developers.com/showthread.php?t=2271909
I then installed the Pac-Man rom and the google apps. Unfortunately sth went wrong and the keyboard was not working at all - every few seconds I was getting a message that the AOSP (android keyboard) stopped working. I tried few things to fix that (like clearing the data and cache for AOSP but that didn't work.
Then I have downloaded the CM ROM for Kindle from this link:
http://forum.xda-developers.com/showthread.php?t=2388341
I have installed it and wiped the data and cache.
That did not work and I got a red text telling me that there was a problem with my Kindle and I should wipe the data and restore it to factory status. I did that and then used KFFirstAide to restore the Kindle from the backup I have taken beforehand.
After the restore I sort of got the system back. Unfortunately I got no applications on the home screen although in the list of installed applications they were there.
So I decided to flash the TRWP and bootloader again (as I lost them doing the restore from backup) as I just wanted to boot into recovery and try to flash another rom (Kinology). I flashed them using fastboot no problem.
Unfortunately once I flashed them and did the "fastboot -i 0x1949 reboot" Kindle stopped playing nice and is looping.
Kindle Fire orange logo appears for about 4-5 seconds and then flickers and kind of restarts and then again orange logo apeears for 4-5 seconds, flickers and just loops like that.
I have already ordered the factory cable but I have a question what do I need to do once it arrives.
Can I go back to stock OS somehow? Where can I get it?
if not then what should I do to unbrick it and flash any rom on it?
thanks in advance
Raf
fastboot -i 0x1949 getvar product
fastboot -i 0x1949 reboot
Click to expand...
Click to collapse
fully restores your kindle with KFHD_SRT KFFirstAide or in my case use KFHD_SRT and came back to life
Rabarbar said:
I have already ordered the factory cable but I have a question what do I need to do once it arrives.
Can I go back to stock OS somehow? Where can I get it?
if not then what should I do to unbrick it and flash any rom on it?
thanks in advance
Raf
Click to expand...
Click to collapse
Hold the power button down for 20 seconds until it power downs and save your battery. When you get your fastboot cord use this tool http://forum.xda-developers.com/showthread.php?t=1951254
Hi there,
Anyone that could help me with my KFHD 7"
I run TWRP v2.6.3.1, and installed CM-11-20140114-UNOFFICIAL-tate and gapps-kk-20140105.
The first installation went fine and it booted using the new CM. However, next time I booted, it got stuck in boot loop on the blue KFHD logo.
I can enter TWRP, but it fails when I run recovery of any previous versions.
I have a factory cable.
Any ideas?
Thank you!
Christiansloth said:
Hi there,
Anyone that could help me with my KFHD 7"
I run TWRP v2.6.3.1, and installed CM-11-20140114-UNOFFICIAL-tate and gapps-kk-20140105.
The first installation went fine and it booted using the new CM. However, next time I booted, it got stuck in boot loop on the blue KFHD logo.
I can enter TWRP, but it fails when I run recovery of any previous versions.
I have a factory cable.
Any ideas?
Thank you!
Click to expand...
Click to collapse
You tried factory resetting from recovery?
Hello everyone,
I own a Kindle Fire HD 7" (X43Z60) the one WITH camera in front.
Bought it from a online auction site used, it was on bootloop (reason i got it cheap)
Since i know electronics i was able to make my own Factory Cable using some useful guides on this forum, managed to get the KFHD7 on fastboot without issues.
Then I restored it to STOCK amazon os 7.2.3 using this guide http://forum.xda-developers.com/showthread.php?t=1951254 it there was no problem, the OS loaded, there was SuperUser and it was rooted.
Then I went to the Kindle Fire 2nd-bootloader + TWRP 2.7.0.0 for the Kindle Fire HD 7 http://forum.xda-developers.com/showthread.php?t=2128848 and followed all the steps.
downloaded files
checked md5 hash for all files
checked ADB working
checked fastboot working
flashed everything
I followed every single step and after finishing to flash all the files using fastboot, yet the KFHD7 does not get into TWRP, in the last step i reboot the device using: fastboot -i 0x1949 reboot
It shows the KindleFire logo in yellow, and then blue as the OP of the guide states, but even while holding down Vol Up (far left button) from the yellow to blue logo, it wont load TWRP, in fact, it just stays on the blue KindleFire logo, i have left it for more than 30 mins yet it doesnt load up.
Using: fastboot -i 0x1949 oem recovery
Doesnt work either, it wont load up TWRP it will stay on the blue kindlefire logo.
Im still able to get into fastboot using the factory cable once again.
Redid all the steps once again from KFHD_SRT to 2nd Bootloader +TWRP, and still stuck in the blue KindleFire logo.
Any clues?
UPDATE:
Tried several versions of Hashcode's TWRP modified version goo(dot)im/devs/Hashcode/tate/
From TWRP 2.7.0.0 downwards until i reached 2.4.4.0 this one for my surprise, actually booted up after holding the VOL UP button for 1 MINUTE.
Then tried Hashcode ZIP updates to get TWRP to 2.7.0.0 and i face the same original problem, the Kindle is just stuck in the white/blue KindleFire logo for more than 10 minutes without reaction.
Using the ZIP updates for TWRP 2.5.0.0 and 2.6.3.0 boot the WTRP logo after a very long time, like 3+ Minutes but it just freeze on the TWRP logo, does nothing even after leaving it load for more than 15 minutes.
Any clues?
Stuck on in bootloop, i wiped my kindle fire HD of everything, now when i boot it up it goes directly to the twrp boot icon and does not do anything. It flashes occasionally. I can boot into fastboot but that is all. Please help.
I tried booting into fastboot and typing
fastboot -i 0x1949 flash recovery TWRP.img but to no avail.
I solved it by tinkering around in KFFirstAide.
Tried reinstallling KFHD 7.2.4
then tried reinstalling TWRP with it.
I have no idea what made it suddenly work (probably the wiping of the cache) but if you have the same issue, just do what i did.
Help about kindle fire hd 7" stuck on logo teamwin
RaptorYeshua said:
I solved it by tinkering around in KFFirstAide.
Tried reinstallling KFHD 7.2.4
then tried reinstalling TWRP with it.
I have no idea what made it suddenly work (probably the wiping of the cache) but if you have the same issue, just do what i did.
Click to expand...
Click to collapse
Can you please supply links or steps for each procedure? Thanks, i have the same problem.
Hello!
I have flashed magisk 15.3 on my Amazon Tate through TWRP, and although everything seemed to be going okay to begin with, after I rebooted however, i am stuck in a bootloop.
My device is the Amazon Tate.
My exact issue is that I cannot enter recovery, I cannot seem to enter fastboot and on my screen is the white and orange "Kindle Fire" logo. My rom before this happened was CM13, so its not actually booting into the rom... It's not even booting into the white and blue screen.
Unfortunately when I plug in the tablet now I get the battery charging screen. This is probably a good response as it shows that I still have that partition.
However I still cannot boot into recovery. Could this be because on the Amazon Fire Tate you need to have two bootloaders to open the recovery? One might have become damaged when installing magisk? I'm truly stuck
It's not detected by my laptop in any way.
Oc33lot said:
Hello!
I have flashed magisk 15.3 on my Amazon Tate through TWRP, and although everything seemed to be going okay to begin with, after I rebooted however, i am stuck in a bootloop.
My device is the Amazon Tate.
My exact issue is that I cannot enter recovery, I cannot seem to enter fastboot and on my screen is the white and orange "Kindle Fire" logo. My rom before this happened was CM13, so its not actually booting into the rom... It's not even booting into the white and blue screen.
Unfortunately when I plug in the tablet now I get the battery charging screen. This is probably a good response as it shows that I still have that partition.
However I still cannot boot into recovery. Could this be because on the Amazon Fire Tate you need to have two bootloaders to open the recovery? One might have become damaged when installing magisk? I'm truly stuck
It's not detected by my laptop in any way.
Click to expand...
Click to collapse
I had your exact problem and solved it yesterday. The first thing you need to do is buy a fastboot cable (I bought this one: https://www.amazon.com/gp/product/B00KYVEM1I/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1) to get into fastboot mode, then follow my other post here: https://forum.xda-developers.com/kindle-fire-hd/7-development/rom-marshmallow-t3315075/post75553313
Lesson Learned: DO NOT FLASH MAGISK ON THIS TABLET EVER!