Flashed wrong TRWp and now the touch cells do not respond to screen layuot. Any advice welcome
answer to myself: dial *#2663# and update the touch FW by pressing "TSP FW update
worked like a charm
Related
I have a GT-I9000M.
Firmware: 2.2
Baseband Version: I9000UGJL2
Kernel: 2.6.32.9
Build: FROYO.UGJL2
Phones Touch key FW: 0x02
Parts Touch key FW: 0x0
The Back Button and Menu button when pressed just light up and do not do anything else. They stay on for hours.
I have read that a "Touch key FW Update" using the *#2663# option should work.
After clicking the "Touch key FW update", a pop up appears with the "Now Updating", the circle spins, but the update never completes and the message stays on the screen.
Any ideas on how to get the update to work.
connect to wifi and then try mine is working ok tsp fw update took 1 mint and touch key fw update took 10 sec
I have tried WIFI, the update never completes.
Any suggestions?
Flash old eclair with odin, update touch form and you'll get back your touch buttons, after flash the rom wath you want. At least work that for me
Sent from my GT-I9000 using XDA App
[Q] Help: updated TSP & touch firmware in 2663 menu and lost menu and back buttons
Please help, I was about to attempt flashing and rooting for the first time, and read that I should update the TSP and TW firmware in the 2663 dialer menu first, so I did it. My Back and Menu buttons were working fine before, and now they are not working at all. I did a factory reset, but that did not fix it. Any other suggestions? Please help! I am running I9000M with stock 2.3.3.
Hey,
I have a problem with my Galaxy S I9000. The soft-touch buttons aren't working anymore.
The first time this happend I was on MIUI firmware (2.3.7 I believe). Every now and then the soft-touch buttons wouldn't react anymore. Pressing them made the light of the buttons go on but other than that, they weren't working. Then one day the light wouldn't even go on anymore and the "Key Test" in recovery mode also didn't recognise them.
After that I flashed Stock 2.3.4 and everything was working again for about a week. After that I had the same error all over again but this time I could use *#*#2663#*#* (It didn't work on MIUI) and update the "Soft Touch Firmware" (?). Sometimes it helped, sometimes it didn't help.
Right now I'm on 4.0.3 (MR1-RC4.2) with kernel "Semaphore ICS 1.2.6" and after 10 minutes of working soft-touch buttons... you know the drill.
I don't think this is a hardware problem but I have no idea how to fix it if it is a software problem.
I hope someone can help me with this. :S
Update:
So I flashed back to stock 2.3.5 and it didn't work. After typing *#*#2663#*#* it said:
Phone's Touch key FW version: 0xa9
Part's Touch key FW version: 0x0
I had to press "Touch key FW Update" a few times and the soft-touch keys are working again and it says:
Phone's Touch key FW version: 0xa9
Part's Touch key FW version: 0xa9
The thing is, the "Part's Touch key FW version" is showing a differnt version every now and then. For example:
Phone's Touch key FW version: 0xa9
Part's Touch key FW version: 0xff
I have seriously no idea how to permanently fix this issue.
Darrok said:
Update:
So I flashed back to stock 2.3.5 and it didn't work. After typing *#*#2663#*#* it said:
Phone's Touch key FW version: 0xa9
Part's Touch key FW version: 0x0
I had to press "Touch key FW Update" a few times and the soft-touch keys are working again and it says:
Phone's Touch key FW version: 0xa9
Part's Touch key FW version: 0xa9
The thing is, the "Part's Touch key FW version" is showing a differnt version every now and then. For example:
Phone's Touch key FW version: 0xa9
Part's Touch key FW version: 0xff
I have seriously no idea how to permanently fix this issue.
Click to expand...
Click to collapse
Try flashing your initial base ROM via Odin and IMOORTANTLY have repartition ticked.
Edit: if that doesn't work then its a hardware issue.
Sent from my GT-I9000
Helloworld294 said:
Try flashing your initial base ROM via Odin and IMOORTANTLY have repartition ticked.
Edit: if that doesn't work then its a hardware issue.
Sent from my GT-I9000
Click to expand...
Click to collapse
What do you mean "initial base rom"? The one I bought the phone with? Or the last official Samsung ROM?
While flashing to 2.3.5 Stock I checked "repartition" (with a 512 Pit File - s1_odin_20100512.pit) and as I said: Sometimes this solves the issue, sometimes I have to update the Touch-Firmware a few times to make it work again.
Another problem is that *#*#2663#*#* doesn't work on Custom ROMS so I have to flash back to Stock, fix it, and then flash back to Custom only to have the same issue later again.
Could this really be a hardware-problem? It sounds strange, because it's fixed through software. (Well, temporarily fixed...)
I am experiencing similar issues. Buttons are litten up on touch, but don't work. Locking/unlocking the phone or restarting the launcher fix them sometimes, but not always.
Darrok, had you managed to fix the problem?
Hi all,
I have a small problem with my Xperia Z
I've rooted and installed CWM recovery, where everything worked, ran
and problem going on.
but then I wanted to install FXP213, contrary to the intall manual (shame on me), I have elected to install CWM from sdcard, and installed.
The unit was on the date:
- rooted
- Bootloader unlock allowed no
- CWM recovery installed
now it will not boot, when pressing the power button, it vibrates once briefly
when pressing the power button + volume up, it vibrates briefly and then three times in succession
on pc it is not recognized
there's a possibility the unit to reset this or is only the attempt to ask it to send in for warranty?
thanks in advance
greeting Joe
Flash a ftf file with flashtool
device in the flash tool is not recognized
http://forum.xda-developers.com/showthread.php?t=2216974
Sent from my C6602 using xda premium
100k thanks, have downloaded the update software from sony down and just install the stock rom again, hope it works out
edit: thanks again, everything worked out, gets running again :good:
Hi, I have some trouble with my GT P1000l today.
I installed the new OpenPDroid update, and when I reboot it my touchscreen and my capacitative buttons didn't work, also the volume rocker, and the power button, then when trying to get to recovery mode, the capacitative buttons also didn't work. after booting my divice over and over again, i decided to install PA 3.15 thinking it will solve the problem but when it rebooted the touchscreen and capacitative buttons wheren't working yet.
I hope someone can help me, thanks.
Found this on Cafe TI:
No touch? That means you got the wrong kernel installed. A couple of builds had problems identifying the exact model. Just flash your kernel through recovery or heimdall / odin.
Hope, it helps... :cyclops: