Related
I am very familiar with the hole ODIN&Root&Flash system with the Samsung Galaxy devices and my friends see me with my super Galaxy S3 overmodified and think is just plain easy so a friend of mine tried to root his Galaxy S3 Mini L version (Central and South American version) and after I don't know what he did his device just didn't woke up and is just trapped in the Galaxy Bootscreen, not even entering into the boot amination.
I kinda had a suspicion that he flashed a rooted ROM that was for the international Mini (the one without a L) IDK if it changes something or if the versions of this smartphone have something different in the insides, but I already tried flashing the WIPE_I8190.zip with ODIN and it failed to pass the bootscreen, I also flashed the Stock Firmware from SamMobile that is for the Mexican Version which is this smartphone (IUSACELL) and it passed successfully but it is stuck again
Do someone have any idea of how to save this poor smartphone?!
Try this, flash in PDA in Odin. Hope it helps you.
http://forum.xda-developers.com/attachment.php?attachmentid=1597045&d=1356657742
Sent from my GT-I8190 using xda premium
Thank you so much it actually worked!! but if you can tell me, what did the file make?!
Get rid of boot loop, save that file just in case you need again. So many people have this problem
Sent from my GT-I8190 using xda premium
I have the same problem
kicker63 said:
Get rid of boot loop, save that file just in case you need again. So many people have this problem
Sent from my GT-I8190 using xda premium
Click to expand...
Click to collapse
Hello dears! i have the same problem, my samsung GT-I8190L stays in the samsung logo (bootloop),
I tried flashing PARAM_8190.zip, wipe_8190 an original firmware and custom firmware.. and nothing.. is staying in bootloop. I was told to install from odin the bootloader, pda, phone, csc and PIT file. Then I have a problem, where to find these files for my Samsung Galaxy Mini GT-I8190L s3?. thank you very much! :fingers-crossed:
Flash the PARAM in PDA in Odin only. Don't mess with the PIT file.
Sent from my GT-I8190 using Tapatalk 2
I have the same problem (BOOTLOOP)
kicker63 said:
Flash the PARAM in PDA in Odin only. Don't mess with the PIT file.
Sent from my GT-I8190 using Tapatalk 2
Click to expand...
Click to collapse
Already did, friend and not result, so I need the bootloader file and in any case the pit file, because with those files I was told that could revive my terminal. Thanks again!: D
abelrolon77 said:
Already did, friend and not result, so I need the bootloader file and in any case the pit file, because with those files I was told that could revive my terminal. Thanks again!: D
Click to expand...
Click to collapse
You can find the pit file in the unbrick thread, you really dont need an pit file if odin doesn't give you pit errors
Can you boot into recovery? vol-up+home+power?
Same Problem (bootloop)
AssToast said:
You can find the pit file in the unbrick thread, you really dont need an pit file if odin doesn't give you pit errors
Can you boot into recovery? vol-up+home+power?
Click to expand...
Click to collapse
oh! negative I can not access the recovery mode, but yes in download mode!. I tried flashing custom rom and original rom. and accomplished nothing
abelrolon77 said:
oh! negative I can not access the recovery mode, but yes in download mode!. I tried flashing custom rom and original rom. and accomplished nothing
Click to expand...
Click to collapse
just download your stock firmware from here http://www.sammobile.com/firmwares/1/?model=GT-I8190L&pcode=0#firmware
put it in pda. no need for pit file. make sure re-partition is unchecked.
if you stuck in bootloop after finishing, flash param as pda.
Samsung Galaxy s3mini (bootloop)
samersh72 said:
just download your stock firmware from here (URL)
put it in pda. no need for pit file. make sure re-partition is unchecked.
if you stuck in bootloop after finishing, flash param as pda.
Click to expand...
Click to collapse
Dear, i tried as you said and can not get anything! continue rebooting my GT-i8190L
postdata: i can´t acces to recovery mode, but i can acces to download mode! Thanks friends.
abelrolon77 said:
Dear, i tried as you said and can not get anything! continue rebooting my GT-i8190L
postdata: i can´t acces to recovery mode, but i can acces to download mode! Thanks friends.
Click to expand...
Click to collapse
[HOW-TO] Enable Three Button Combo [RECOVERY]
If it doesn't work, flash a separate recovery. [RECOVERY] CWM/TWRP/STOCK [DB][ALL i8190 Models]
Samsung galaxy s mini in (BOOTLOOP) death phone??
tys0n said:
[Enable Three Button Combo [RECOVERY]
If it doesn't work, flash a separate recovery. [ [RECOVERY] CWM/TWRP/STOCK [DB][
Click to expand...
Click to collapse
Dear, i tried and nothing, is that my phone is dead? There is another solution? thanks
abelrolon77 said:
Dear, i tried and nothing, is that my phone is dead? There is another solution? thanks
Click to expand...
Click to collapse
You still can't enter recovery?
GT-i8190L
tys0n said:
You still can't enter recovery?
Click to expand...
Click to collapse
negative dear, i can't. because the file PiT show error in my phone ( custom pit error ) and the recuperation button file.
abelrolon77 said:
negative dear, i can't. because the file PiT show error in my phone ( custom pit error ) and the recuperation button file.
Click to expand...
Click to collapse
Use this Pit file and tick repartition in odin while flashing, did you already have this problem when you were flashing stock rom? try flashing the pit with stock rom
Samsung GT-I8190L (bootloop) HELP PLEASE!!!
AssToast said:
Use this and tick repartition in odin while...ted firmware, i can't acces to recovery mode!
Click to expand...
Click to collapse
abelrolon77 said:
Dear, i tried and nothing, is that my phone is dead? There is another solution? thanks
Click to expand...
Click to collapse
Did it say PASS, or did you get errors?
Samsung GT-I8190L (bootloop) HELP PLEASE!!!
tys0n said:
Did it say PASS, or did you get errors?
Click to expand...
Click to collapse
Hello friend!, I have "errors" in odin, in the method "Enable Three Button Combo" and "CWM / TWRP / STOCK [DB] [ALL i8190 Models". What I can do?. You know some page to download the official PIT, bootloader, phone an CSC file?
abelrolon77 said:
Hello friend!, I have "errors" in odin, in the method "Enable Three Button Combo" and "CWM / TWRP / STOCK [DB] [ALL i8190 Models". What I can do?. You know some page to download the official PIT, bootloader, phone an CSC file?
Click to expand...
Click to collapse
I have some service firmware for i8190 and i8190N, but not for L. I'll see if I can find any..
PLease help,
i tried to do an update to AT&T sm g900a . my fw was 4.4.2 ng3. and i tired to flash nd3 and tried to flash oc1. but my phone stuck wit open padlock. then i flash stock partitions on oc4. then it could not on the phone.(i belive it automaticaly select re-partitions). then it only turn on upto samsumng log and stuck there. after 5 sec it reboot again.
i tried a stock rom flash with odin 3files Ap, cp & CSC. but it is not recovering. then i think i do erase the nand erase all.
i have also .pit file for SM g900A 16gb, and also tried to flash the pit file by checking re-partitions in odin3.
nothing work out. then i tried to flash single ap file but it is failed.
kindly give some advise,
Jstn Antony said:
PLease help,
i tried to do an update to AT&T sm g900a . my fw was 4.4.2 ng3. and i tired to flash nd3 and tried to flash oc1. but my phone stuck wit open padlock. then i flash stock partitions on oc4. then it could not on the phone.(i belive it automaticaly select re-partitions). then it only turn on upto samsumng log and stuck there. after 5 sec it reboot again.
i tried a stock rom flash with odin 3files Ap, cp & CSC. but it is not recovering. then i think i do erase the nand erase all.
i have also .pit file for SM g900A 16gb, and also tried to flash the pit file by checking re-partitions in odin3.
nothing work out. then i tried to flash single ap file but it is failed.
kindly give some advise,
Click to expand...
Click to collapse
Try this,
http://forum.xda-developers.com/showthread.php?p=60012961
Waiting4MyAndroid said:
Try this,
http://forum.xda-developers.com/showthread.php?p=60012961
Click to expand...
Click to collapse
hi thank you, i tried this but now it is stuck on galaxy s5 logo with unlocked padlock. and there no reboot , just stay the phone on. no way to switch off except take out the battery.
please advise
Mine was like this and I also tried the above to no avail....the only way I found around it was to take it in to ATT store and have them "re-flash the Lolipop update" Wiped my phone but it works, now I just have to wait (patiently) for root exploit for the OTA 5.0.
twocrows said:
Mine was like this and I also tried the above to no avail....the only way I found around it was to take it in to ATT store and have them "re-flash the Lolipop update" Wiped my phone but it works, now I just have to wait (patiently) for root exploit for the OTA 5.0.
Click to expand...
Click to collapse
thank you, any one have better idea other than this. can we do complete reflash the os on samsung sm g900a At&t?
please help
Jstn Antony said:
thank you, any one have better idea other than this. can we do complete reflash the os on samsung sm g900a At&t?
please help
Click to expand...
Click to collapse
i flashed full stock 4.4.2 nce but still it is stuck in the sammsung boot logo...
Jstn Antony said:
i flashed full stock 4.4.2 nce but still it is stuck in the sammsung boot logo...
Click to expand...
Click to collapse
Try factory reset from recovery.
Jstn Antony said:
i flashed full stock 4.4.2 nce but still it is stuck in the sammsung boot logo...
Click to expand...
Click to collapse
Which file did you flash
archie87 said:
Which file did you flash
Click to expand...
Click to collapse
i flashed 4.4.2 nce stock rom, by odin containing 4 files BL,AP, CP, CSC (BL didn't used)
i believed that it happened to me like stuck on Samsung logo at first time, when i flashed oc4 stock partitions to my 4.4.2 ng3 .
after that it never rebooted.
when i try to from sdcard it will say e/footer is wrong, something like that.
but somebody told me that i can adb and what is that ? it will help me or not?
kindly advise....
Jstn Antony said:
i flashed 4.4.2 nce stock rom, by odin containing 4 files BL,AP, CP, CSC (BL didn't used)
i believed that it happened to me like stuck on Samsung logo at first time, when i flashed oc4 stock partitions to my 4.4.2 ng3 .
after that it never rebooted.
when i try to from sdcard it will say e/footer is wrong, something like that.
but somebody told me that i can adb and what is that ? it will help me or not?
kindly advise....
Click to expand...
Click to collapse
Flash this file instead and you should be back to normal.
http://forum.xda-developers.com/att...w-to-unbrick-flash-to-stocknce-g900a-t3077652
archie87 said:
Flash this file instead and you should be back to normal.
http://forum.xda-developers.com/att...w-to-unbrick-flash-to-stocknce-g900a-t3077652
Click to expand...
Click to collapse
thank you i am trying to download this file. but i could not success due to bad internet. before i tried almost same single fie in the ap folder of odin. but it was not success.
but iwil try this and give you the updates...
Hi Archie
Big thank you, its great working Back to normal...
archie87 said:
Flash this file instead and you should be back to normal.
http://forum.xda-developers.com/att...w-to-unbrick-flash-to-stocknce-g900a-t3077652
Click to expand...
Click to collapse
Sweet! I was in the same boat and saw the post about getting stuck on the Samsung screen. This solution worked perfectly!
Thanks!
I am running Alliance 9.1 rom and I was searching for my Safestrap recovery. I didn't find it and so I tried busybox "reboot into recovery" script. Doing that made my phone go crazy "go to att and let the service tech" look at it. I can't boot into recovery as it gives me this error and I have to use ODIN to flash the BL file. Now I can't get into my phone because of a Pin. I think that the script from busy box is still running and if I can get passed my pin, I want to see if I can disable the script. My main issue is, can I use the aforementioned process to just start over? I was told I cannot use ODIN to flash to stock rom. I have already found out that I have tripped my knox counter. PLEASE HELP. THIS IS MY ONLY PHONE AND MY WIFE IS GOING TO KILL ME.
Thank you for your help.:crying:
dwarftoaf said:
I am running Alliance 9.1 rom and I was searching for my Safestrap recovery. I didn't find it and so I tried busybox "reboot into recovery" script. Doing that made my phone go crazy "go to att and let the service tech" look at it. I can't boot into recovery as it gives me this error and I have to use ODIN to flash the BL file. Now I can't get into my phone because of a Pin. I think that the script from busy box is still running and if I can get passed my pin, I want to see if I can disable the script. My main issue is, can I use the aforementioned process to just start over? I was told I cannot use ODIN to flash to stock rom. I have already found out that I have tripped my knox counter. PLEASE HELP. THIS IS MY ONLY PHONE AND MY WIFE IS GOING TO KILL ME.
Thank you for your help.:crying:
Click to expand...
Click to collapse
If you can get to download mode, then you should be able to flash ALL four files in Odin which will wipe your phone clean [100% Stock] Lollipop 5.0 (N900AUCUEOC1) Odin Tars http://forum.xda-developers.com/note-3-att/general/100-stock-lollipop-5-0-n900aucueoc1-t3069609 OR N900AUCUCNC2 ODIN Files http://forum.xda-developers.com/showpost.php?p=54803130&postcount=136 Use all four this way your will wipe your phone. Can't help with Knox, once tripped that's it. Always do a "normal install" with busybox.
Whats the Difference?
Rooted i747 said:
If you can get to download mode, then you should be able to flash ALL four files in Odin which will wipe your phone clean [100% Stock] Lollipop 5.0 (N900AUCUEOC1) Odin Tars http://forum.xda-developers.com/note-3-att/general/100-stock-lollipop-5-0-n900aucueoc1-t3069609 OR N900AUCUCNC2 ODIN Files http://forum.xda-developers.com/showpost.php?p=54803130&postcount=136 Use all four this way your will wipe your phone. Can't help with Knox, once tripped that's it. Always do a "normal install" with busybox.
Click to expand...
Click to collapse
Thank you for your reply, I am down loading the (XXXXXXXcueoc1) files now, but I have all the files for the (XXXXXXXcucnc2) what is the difference of the two?
ALSO should I use the .pit file I have for it? HLTE_USA_ATT.pit?
dwarftoaf said:
Thank you for your reply, I am down loading the (XXXXXXXcueoc1) files now, but I have all the files for the (XXXXXXXcucnc2) what is the difference of the two?
ALSO should I use the .pit file I have for it? HLTE_USA_ATT.pit?
Click to expand...
Click to collapse
OC1 is Lollipop and NC2 is Kitkat. You can't root OC1 and NC2 you can. You wouldn't need the PIT file.
This is what i have so Far, Please help
Rooted i747 said:
If you can get to download mode, then you should be able to flash ALL four files in Odin which will wipe your phone clean [100% Stock] Lollipop 5.0 (N900AUCUEOC1) Odin Tars http://forum.xda-developers.com/note-3-att/general/100-stock-lollipop-5-0-n900aucueoc1-t3069609 OR N900AUCUCNC2 ODIN Files http://forum.xda-developers.com/showpost.php?p=54803130&postcount=136 Use all four this way your will wipe your phone. Can't help with Knox, once tripped that's it. Always do a "normal install" with busybox.
Click to expand...
Click to collapse
This is what is hapening right now:
Com port one is not opening
but two is doing all the work....
did i fup my phone?
dwarftoaf said:
This is what is hapening right now:
Com port one is not opening
but two is doing all the work....
did i fup my phone?
Click to expand...
Click to collapse
Is your phone in download mode and connected to computer?
Thank you !!!!!!!!!!!
Rooted i747 said:
OC1 is Lollipop and NC2 is Kitkat. You can't root OC1 and NC2 you can. You wouldn't need the PIT file.
Click to expand...
Click to collapse
THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU !!!!
IVE been reading through all the posts and i was just needing the help from someone that i'll all be okay!!!!!
THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU !!!
I shall sing your praises for all time!
COM number like mine shows 4 don't mean nothing. Just means it's connected.
Seems Good now
Rooted i747 said:
COM number like mine shows 4 don't mean nothing. Just means it's connected.
Click to expand...
Click to collapse
The phone booted and I've gone through the process. I was in download and while it did say "fail" on the com1 slot, the com 2 slot "passed" and I'm going through the setup process now. I am just happy I don't have an 800.00 brick.
Thank you so much for your help and I do appreciate your responses as I am new to this. I will most likely put alliance back on unless you have a Rom you use currently that you would recommend?
dwarftoaf said:
The phone booted and I've gone through the process. I was in download and while it did say "fail" on the com1 slot, the com 2 slot "passed" and I'm going through the setup process now. I am just happy I don't have an 800.00 brick.
Thank you so much for your help and I do appreciate your responses as I am new to this. I will most likely put alliance back on unless you have a Rom you use currently that you would recommend?
Click to expand...
Click to collapse
When you put the Alliance rom on it and to get to safestrap all you have to do is hold your power button have a sec and click restart then safestrap. BUT after you flash anything you have to flash the OC1 Kernel before leaving safestrap.
This just harder
Rooted i747 said:
When you put the Alliance rom on it and to get to safestrap all you have to do is hold your power button have a sec and click restart then safestrap. BUT after you flash anything you have to flash the OC1 Kernel before leaving safestrap.
Click to expand...
Click to collapse
NOOB QUESTION:
What is the OC1 Kernal and what does it do. Sorry I am taking up your time.
dwarftoaf said:
NOOB QUESTION:
What is the OC1 Kernal and what does it do. Sorry I am taking up your time.
Click to expand...
Click to collapse
It does a lot http://www.androidcentral.com/android-z-what-kernel
Education
Rooted i747 said:
It does a lot http://www.androidcentral.com/android-z-what-kernel
Click to expand...
Click to collapse
Thank you again for all your help! I will do more research and education before I mess with it again. I will root, and take off the bloatware and use the phone until i can get a hold of an experimental phone I can use.
Thank you again for all your Help!
Hi,
I have SGH-T599N that has been sitting around for a while and I wanted to give it to my son. When I turn it on, it gets to the initial splash screen with Samsung Exhibit on it, but never gets past there. I went into recovery and did a wipe, but it still will not boot. So I figured I would try to resurrect it with Kies, but I don't see a serial number on it, and even serials I have found on the web don't work.
Looking for any pointers or paths besides junking this and finding another phone. I tried to use fastboot to flash the recovery with CWM to see if I could put another or factory rom on it, but that just sits with a message that it is waiting for the device.
Thanks
Hi. Try to Odin flash it with 4-file firmware.
tys0n said:
Hi. Try to Odin flash it with 4-file firmware.
Click to expand...
Click to collapse
Thanks, but I can't find a PIT. Can I do it without it?
tys0n said:
Hi. Try to Odin flash it with 4-file firmware.
Click to expand...
Click to collapse
Thanks, but I can't find a PIT. Can I do it without it?
4-file, you mean: https://forum.xda-developers.com/android/general/tutorial-to-create-samsung-4-file-multi-t2882601 ?
frogbite said:
Thanks, but I can't find a PIT. Can I do it without it?
4-file, you mean: https://forum.xda-developers.com/android/general/tutorial-to-create-samsung-4-file-multi-t2882601 ?
Click to expand...
Click to collapse
Here's a 2-file SGH-T599N_T599NUVAOH1_T599NTMBAOH1_1124899_REV00_user_low_ship.7z - 487.43 MB
It's a user_low_ship so I guess it should still be the same partitions included as in a 4-file.
Back up anything you want to keep before flash. This will wipe everything.
I was installing xposed on my 810 and things went to hell. I can only reboot to recovery and download mode which shows an error in the Pic. I have no idea what happened or what to do. Also get error when trying to flash stock firmware with Odin.
As long as you can get in to twrp only some data may get lost, is it not?
SvenHee said:
As long as you can get in to twrp only some data may get lost, is it not?
Click to expand...
Click to collapse
That's what I thought. But I can flash a new ROM but only boot Into twrp or download mode. I can however see the system and files through twrp file explorer. Something is corrupt but I'm not sure what. Odin stops after the first step of flashing and fails.
Bubba Fett said:
That's what I thought. But I can flash a new ROM but only boot Into twrp or download mode. I can however see the system and files through twrp file explorer. Something is corrupt but I'm not sure what. Odin stops after the first step of flashing and fails.
Click to expand...
Click to collapse
Which version of ODIN and what is the specific error?
ashyx said:
Which version of ODIN and what is the specific error?
Click to expand...
Click to collapse
I'm using Odin 3.10.7.its usually pretty good for me. The error was
NAND write start!!
FAIL!
It falls in its warranty from Samsung. Is it possible to extract just the stock recovery from an image and push back on with adb. They may not liking booting to TWRP when they turn it on. If it's that bad. Appreciate the help.
Bubba Fett said:
I'm using Odin 3.10.7.its usually pretty good for me. The error was
NAND write start!!
FAIL!
It falls in its warranty from Samsung. Is it possible to extract just the stock recovery from an image and push back on with adb. They may not liking booting to TWRP when they turn it on. If it's that bad. Appreciate the help.
Click to expand...
Click to collapse
Dont you Have a twrp backup you can restore?
ashyx said:
Dont you Have a twrp backup you can restore?
Click to expand...
Click to collapse
I tried that. And I can install a fresh ROM from Twrp but still only reboots to Twrp. I've tried format data option as well.
Bubba Fett said:
I tried that. And I can install a fresh ROM from Twrp but still only reboots to Twrp. I've tried format data option as well.
Click to expand...
Click to collapse
Which firmware are you attempting to flash?
ashyx said:
Which firmware are you attempting to flash?
Click to expand...
Click to collapse
I tried QE1 I believe it is called. I was on 7.0 and this the latest I could find. It was from Updato. I also tried an older version but no go.
Bubba Fett said:
I tried QE1 I believe it is called. I was on 7.0 and this the latest I could find. It was from Updato. I also tried an older version but no go.
Click to expand...
Click to collapse
Can you link to it?
ashyx said:
Can you link to it?
Click to expand...
Click to collapse
It might be called QCL. It's the June 4, 2017 from US.
https://updato.com/firmware-archive-select-model?q=SM-T810&exact=1&r=SEB,XAR&v=&rpp=15
Bubba Fett said:
It might be called QCL. It's the June 4, 2017 from US.
https://updato.com/firmware-archive-select-model?q=SM-T810&exact=1&r=SEB,XAR&v=&rpp=15
Click to expand...
Click to collapse
I suggest you update to odin v3.12 and flash with repartition ticked.
Boot to Download using the key combo and observe the output on the device.
ashyx said:
I suggest you update to odin v3.12 and flash with repartition ticked.
Boot to Download using the key combo and observe the output on the device.
Click to expand...
Click to collapse
Thank you. I will report back with results.
ashyx said:
I suggest you update to odin v3.12 and flash with repartition ticked.
Boot to Download using the key combo and observe the output on the device.
Click to expand...
Click to collapse
Here are the results.
Bubba Fett said:
Here are the results.
Click to expand...
Click to collapse
I suggest you flash with the PIT file, repartition checked.
https://gsm-firmware.com/index.php?a=browse&b=file-info&id=16185
ashyx said:
I suggest you flash with the PIT file, repartition checked.
https://gsm-firmware.com/index.php?a=browse&b=file-info&id=16185
Click to expand...
Click to collapse
What a great site! I had to create an account to get the file but it also failed immediately after the Don not turn off target log and re-partition failed right after. Yikes!
Just noticed the tablet says SECURE CHECK FAIL : PIT
ashyx said:
I suggest you flash with the PIT file, repartition checked.
https://gsm-firmware.com/index.php?a=browse&b=file-info&id=16185
Click to expand...
Click to collapse
What a great site! I had to create an account to get the file but it also failed immediately after the Don not turn off target log and re-partition failed right after. Yikes!
Edit: reboot no longer goes to recovery. Pic attached.
Bubba Fett said:
What a great site! I had to create an account to get the file but it also failed immediately after the Don not turn off target log and re-partition failed right after. Yikes!
Edit: reboot no longer goes to recovery. Pic attached.
Click to expand...
Click to collapse
Why are you trying to flash firmware for the T810 when your device is a T813, totally different device? No wonder the firmware won't flash!
https://updato.com/firmware-archive-select-model?record=33A4E513276611E89F15FA163EE8F90B
ashyx said:
Why are you trying to flash firmware for the T810 when your device is a T813, totally different device? No wonder the firmware won't flash!
Click to expand...
Click to collapse
I saw that too. It is an 810. I have 2 of them! Im not sure what made that change. For more detail here's the scenario before it went to crap
-installed xposed app
-installed 3minit rebooter
-reboot to recovery to flash xposed zip
-flashed arm 64 version instead of arm
-reboot, but only goes to recovery.
-cursing, throwing stuff, failure