Related
Im new for rooting.i had follow the video below to root and at the end my bluetooth is not functioning. Can anyone teach me the way to unroot it so that i can send my devices for warrantly. After unroot,will my bluetooth recover? Thank for help
Go youtube n type *How to Root ICS on Galaxy Note GT-N7000* and click the first video.
Need more info.
Files you used.
Where were you before. (rom, kernel?)
The method you used involves Franco kernel which is no longer being supported.
Also, it is known that Bluetooth does not work on Franco.
Also, it uses temp cwm which is known potentially brick your device.
Next time remember to do more reading about it or just follow the up to date guides on XDA.
I can suggest to you to flash a safe kernel (I am not sure if that version of Franco from June is safe). Try speed mod or Hydracore kernel found in original development sub forum. Flash with Mobile Odin.
Then, test your bluetooth again.
Sent from my GT-N7000 using Xparent ICS Tapatalk 2
monkeylii0815 said:
Im new for rooting.i had follow the video below to root and at the end my bluetooth is not functioning. Can anyone teach me the way to unroot it so that i can send my devices for warrantly. After unroot,will my bluetooth recover? Thank for help
Go youtube n type *How to Root ICS on Galaxy Note GT-N7000* and click the first video.
Click to expand...
Click to collapse
Find your stock Firmware in here: http://www.sammobile.com And flash it with odin pc
Markuzy said:
Need more info.
Files you used.
Where were you before. (rom, kernel?)
The method you used involves Franco kernel which is no longer being supported.
Also, it uses temp cwm which is known potentially brick your device.
Next time remember to do more reading about it or just follow the up to date guides on XDA.
I can suggest to you to flash a safe kernel (I am not sure if that version of Franco from June is safe). Try speed mod or Hydracore kernel found in original development sub forum. Flash with Mobile Odin.
Then, test your bluetooth again.
Sent from my GT-N7000 using Xparent ICS Tapatalk 2
Click to expand...
Click to collapse
Actually im super newbie,i really do not know anything about rooting or phone. i just root by the way that video show
can show me the file and the way to do it?now i just hope i can unroot it and repair the bluetooth,after that i will straightly send to samsung factory for warrantly to format and reset it.by the way,i had used triangle away to make the counter 0.
monkeylii0815 said:
Im new for rooting.i had follow the video below to root and at the end my bluetooth is not functioning. Can anyone teach me the way to unroot it so that i can send my devices for warrantly. After unroot,will my bluetooth recover? Thank for help
Go youtube n type *How to Root ICS on Galaxy Note GT-N7000* and click the first video.
Click to expand...
Click to collapse
Find the firmware number you're on, and flash stock kernel from here Flash it in PC odin. Instructions are on that thread. You will get unroot, and stock, and you can send it back. This however is assuming you are on stock samsung ICS? No custom roms? Correct?
I'm not sure what you did, but if you want to see if you're bluetooth is working, download the Hydracore kernel from here, put it in you're sd card, and flash right from recovery (vol up + power + home at the same time). Reboot back into recovery, don't boot up the system. Once you boot back into recovery, wipe cache go to advanced, wipe dalvik, then reboot system.
assuming that you have downloaded and placed the CWM Zip file, Super User Busybox and Super user Uninstaller Signed Zip file and placed the same in your device’s internal memory, turn off the device so that it can be entered in the recovery mode.
To enter your Galaxy Note in the recovery mode, Press Volume Up + Home Button and while holding these both, press Power Button to boot the device in the recovery mode. Release the keys once you see the Samsung logo.In recovery mode, select “install zip from sd card” and then followed by which select the “cwm zip file” followed by the “SU-Uninstaller-signed.zip” file.
It will take less than a minute to finish off the process.Once the device is unrooted successfully, you now need to select the option of “++++ Go Back ++++” and select the option of “reboot system now” to reboot the Galaxy Note.
use triangle away to reset flash counter for warranty purposes.
Sent from my GT-N7000 using xda premium
monkeylii0815 said:
Actually im super newbie,i really do not know anything about rooting or phone. i just root by the way that video show
can show me the file and the way to do it?now i just hope i can unroot it and repair the bluetooth,after that i will straightly send to samsung factory for warrantly to format and reset it.by the way,i had used triangle away to make the counter 0.
Click to expand...
Click to collapse
Okay,
now you can refer to this thread:
http://forum.xda-developers.com/showthread.php?t=1424997
Search for the Malaysia ICS stock rom under N7000DXLR5---4.0.4/12.07.30-N7000OLBLR2
You can use CTRL+F to search your country as there are many roms there.
Now, you can follow Dr xp55's link to download the kernel only, but I find the rom list more thorough to get back to the exact state you were in before as flashing the rom will reflash the kernel as well.
Follow the instructions as given in the thread.
You will need:
1) A PC computer
2) USB cable to connect phone to PC
3) PC Odin, software download link is given in the thread.
4) The stock rom, also given in thread.
5) Your phone
Flashing your stock rom will:
Remove root.
Revert your kernel to stock ICS.
Note:
Stock ICS kernel is dangerous to factory reset on, once you have determined bluetooth is working, you may want to consider the following kernels:
Philz:
http://forum.xda-developers.com/showthread.php?t=1901191
Hydracore:
http://forum.xda-developers.com/showthread.php?t=1749863
Speedmod:
http://forum.xda-developers.com/showthread.php?t=1673072
Instructions should be given in the links.
For re-rooting again (once you are comfortable), see the first link I gave.
There is safe rooting guide given there and is updated and maintained by Dr. Ketan.
darkraven_al said:
use triangle away to reset flash counter for warranty purposes.
Click to expand...
Click to collapse
And how would he use triangle away after unrooting his phone? You clearly should know what you are talking about before guiding someone else.
Do not follow those steps he just mentioned.
darkraven_al said:
use triangle away to reset flash counter for warranty purposes.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Actually if you have read what he posted, he has already used triangle away on his stock rooted ICS rom with franco kernel.
monkeylii0815 said:
Im new for rooting.i had follow the video below to root and at the end my bluetooth is not functioning. Can anyone teach me the way to unroot it so that i can send my devices for warrantly. After unroot,will my bluetooth recover? Thank for help
Go youtube n type *How to Root ICS on Galaxy Note GT-N7000* and click the first video.
Click to expand...
Click to collapse
Hope this has taught you to do your homework.
You can't watch a video, root,then put a post up expecting others to sort your mess out for you. It may sound harsh but all you need is here ,if you get off your butt. Look up Dr. Ketans thread on unrooting the note and follow it to the letter. He has all the answers you need.
Sent from the man in Your attic.....
Hey Guys i have a very serious plrobleme with my samsung Galaxy S
i tried to flash him and install Android 4.3 JB but i ended up deleting the current systeme and the phone w'ont Work he is stuck in the boot loop
PLEASE How i can recover it and get it back..:crying:
Τry to flash via odin semaphore kernel (3.3.0 for 4.3) the .tar link and post how it went.
ioannis_m said:
Τry to flash via odin semaphore kernel (3.3.0 for 4.3) the .tar link and post how it went.
Click to expand...
Click to collapse
The phone:: when i clic on the power button it redirect from the boot loop [GALAXY Si900] to the recovery menu.
i want to flash my phone like the first time i bought it.
please tell me how EXACLY how to restore my old phone back with normal systeme.
please be specific i want NO MISTAKE
my phone info
Samsung Galaxy S i9000
first system ;: Android 2.2update-1
**
please im beggin you how i fix it
rabidi said:
The phone:: when i clic on the power button it redirect from the boot loop [GALAXY Si900] to the recovery menu.
i want to flash my phone like the first time i bought it.
please tell me how EXACLY how to restore my old phone back with normal systeme.
please be specific i want NO MISTAKE
my phone info
Samsung Galaxy S i9000
first system ;: Android 2.2update-1
** I9000XWJW6
please im beggin you how i fix it
Click to expand...
Click to collapse
If you have done a factory reset everything during the process it can't be like your old phone again (messages,data of apps,call logs ) will be lost if you havent saved them before flashing 4.3.Only pictures and videos will still be there (hopefully).
I suggest you search the xda i9000 forum in how to flash with odin any firmware (2.2.x,2.3.x etc) and start over again.Check first if your mobile goes into download mode.(pres vol down+home+power button.)
rabidi said:
Hey Guys i have a very serious plrobleme with my samsung Galaxy S
i tried to flash him and install Android 4.3 JB but i ended up deleting the current systeme and the phone w'ont Work he is stuck in the boot loop
PLEASE How i can recover it and get it back..:crying:
Click to expand...
Click to collapse
just restore stock 2.2/2.3 ROM through odin via download mode.
ioannis_m said:
If you have done a factory reset everything during the process it can't be like your old phone again (messages,data of apps,call logs ) will be lost if you havent saved them before flashing 4.3.Only pictures and videos will still be there (hopefully).
I suggest you search the xda i9000 forum in how to flash with odin any firmware (2.2.x,2.3.x etc) and start over again.Check first if your mobile goes into download mode.(pres vol down+home+power button.)
Click to expand...
Click to collapse
i dont want to get my data back i just want my phone to work i want to install an android systeme any one
i want to know how from A to Z everything
can you tell me how i can make my phone work again :crying:
Search on YouTube!
Sent from my GT-I9000 using XDA Premium 4 mobile app
rabidi said:
i dont want to get my data back i just want my phone to work i want to install an android systeme any one
i want to know how from A to Z everything
can you tell me how i can make my phone work again :crying:
Click to expand...
Click to collapse
use this guide, everything you need to know has beeen mentioned, if not clear , ask. Follow the guide and flash the Gingerbread 2,3,6 stock ROM, than gradually upgrade to any other ROM you like.
Check this out! Links to useful Guides and " Banned " Documentaries
Hello,
I ran into an issue while trying to install X-Note 7. I rooted my phone via the Kingoapp method and it worked. From there I installed the bootstrap recovery which also installed successfully. I went on to install the X-Note 7 rom by placing it in the ex-card and going into recovery mode. Once there, I created a new rom slot on which I installed the new ROM. It said it was successfully installed and I opted to reboot from there. Since then, it's been stuck on the Samsung Galaxy Note 3 Page. If I take my battery off and hold down power+volume up+home button, I can enter that recovery mode but its not the same as bootstrap. I do not know what to do from this point on. Any help will be appreciated!
sazam91 said:
Hello,
I ran into an issue while trying to install X-Note 7. I rooted my phone via the Kingoapp method and it worked. From there I installed the bootstrap recovery which also installed successfully. I went on to install the X-Note 7 rom by placing it in the ex-card and going into recovery mode. Once there, I created a new rom slot on which I installed the new ROM. It said it was successfully installed and I opted to reboot from there. Since then, it's been stuck on the Samsung Galaxy Note 3 Page. If I take my battery off and hold down power+volume up+home button, I can enter that recovery mode but its not the same as bootstrap. I do not know what to do from this point on. Any help will be appreciated!
Click to expand...
Click to collapse
Just do a factory reset from the main system recovery and redo everything over from scratch.
Agent said:
Just do a factory reset from the main system recovery and redo everything over from scratch.
Click to expand...
Click to collapse
Thanks for the reply! I was able to completely unroot it using the method detailed on the link below. I'm going to reroot it but am afraid I may run into this issue again If I attempt to reinstall the same ROM.
http://forum.xda-developers.com/showthread.php?t=2559715
sazam91 said:
Thanks for the reply! I was able to completely unroot it using the method detailed on the link below. I'm going to reroot it but am afraid I may run into this issue again If I attempt to reinstall the same ROM.
http://forum.xda-developers.com/showthread.php?t=2559715
Click to expand...
Click to collapse
Nah you'll be fine. Something just didn't go as planned. Make sure you read all the instructions listed and don't skip any steps. If you follow Xnotes installation guide to the "T", it will work.
Hello everyone. It's me again now this time I bring you root access to the new OTA KITKAT for our S4
Disclaimer : I'm not responsible if your phone suddenly dies, explodes or your cat catches fire. Be warned.
SOME PEOPLE REPORT MOBILE DATA NOT WORKING AFTER THIS PROCESS SO ALL YOU GOTTA DO IS GO INTO YOUR APN SETTINGS MENU AND DO RESET TO DEFAULT SETTINGS AND WRITE YOUR CARRIERS APN SETTINGS AND IT WILL WORK.
This process has a lot of steps but if you follow them correctly you will end up with stock rooted 4.4.2 kitkat with super user and safestrap
Requirements:
If you already took the update and your system version is 4.4.2 keep reading.
1. Patience
2. Pwned Kitkat OTA Update link
3. Pwnedkernel for 4.3 Download
4. System image from stock 4.3 Tar file Download
5. Safestrap for the Galaxy S4 Active Download
6. Stock 4.4 Kitkat Kernel Download
7. Chainfire's SuperSu.zip Download
First after you finish downloading the stock 4.3 image extract it somewhere you remember and you'll see the following files:
BL_I537UCUBML2_2244695_REV06_user_low_ship_MULTI_CERT.tar
AP_I537UCUBML2_2244695_REV06_user_low_ship_MULTI_CERT.tar
CSC_I537UCUBML2_2244695_REV06_user_low_ship_MULTI_CERT.tar
CP_I537UCUBML2_2244695_REV06_user_low_ship_MULTI_CERT.tar
Put your phone in download mode and fire up odin. Under PDA select and flash
AP_I537UCUBML2_2244695_REV06_user_low_ship_MULTI_CERT.tar
This will downgrade your system back to 4.3 because yes the new kitkat bootloader allows you to flash 4.3 signed firmware. Note: YOU CANNOT DOWNGRADE BOOTLOADER SO DONT ATTEMPT IT
Wait until odin finishes flashing the firmware and when the phone reboots itself put it again in download mode. Now you must flash pwnedkernel.tar.md5 selecting PDA again in ODIN and wait for phone to boot up. If your phone gets stuck in the ATT logo then perform a factory reset .
Once your phone boots up enable USB debugging mode and root it using saferoot or vroot. GOOGLE it and you'll find it...Then you must install safestrap.apk
adb install safestrapactive.apk
Click to expand...
Click to collapse
Now copy pwnedkitkat.zip and update-Supersu.zip to your SD Card and once that's finished open up safestrap in your device and tap install when that's done tap reboot to recovery.
Now you'll be at the safestrap recovery screen so go ahead and select install zip file.
IMPORTANT : DO NOT DELETE DATA/CACHE OR DO A FACTORY RESET BEFORE FLASHING THE KITKAT.ZIP OTHERWISE YOU'LL HAVE TO START ALL OVER AGAIN.
Install pwnedkitkat.zip and once it finishes go ahead and install update-supersu.zip to enable root access.
AND FINALLY VERY IMPORTANT YOU MUST FLASH THE 4.4.2 STOCK KERNEL IMAGE USING ODIN AND SELECTING PDA OTHERWISE YOUR PHONE WONT BOOT
Wait for your phone to reboot, open up superuser and disable knox security.
Enjoy your rooted 4.4.2 S4 Active.
Credits : hashcode for making safestrap possible and the other amazing developers at XDA that discovered these exploits in the past and special thanks to Samsung for "letting" open these loopholes
If you are in official 4.3 ML2 see my next post.
Sunderwear said:
Hello everyone. It's me again now this time I bring you root access to the new OTA KITKAT for our S4
Uploading files at the moment....keep in mind that this is not a one click solution and we gonna have to exploit the loooholes courtesy of samsung to get this working..
For now some screenshots..
Click to expand...
Click to collapse
Thank you!
Can't wait. When is the ETA? estimate, 10 minutes?
I just can't wait transforming my S4 to S5!
Edit: 40 minutes passed
Now it is probably close to me. I can feel it!
THANK YOOOOOOU!!!!!!!!!!!!!!!!!!!!!!
If you're currently running 4.3 ML2 official update and you want to upgrade to 4.4.2 but dont want to lose root then keep reading.
In the following steps I'm assuming that you're currently running stock 4.3 Rooted ...see my other guide...and that you didn't modify any system apps otherwise the update will fail and you'll have to restore using the Odin package for 4.3.
1. Download pwnedkitkat.zip from 1st post.
2. If you dont have safetrap installed then you must download it and install it.
3. Copy pwnedkitat.zip and update-superuser.zip to your sdcard
4. Restart your phone in safestrap recovery and install pwnedkitkat.zip and when it's done flashing install superuser.zip.
WARNING : DO NOT PERFORM A FACTORY RESET BEFORE FLASHING THE ZIP. THIS IS A MODIFIED OFFICIAL UPDATE SO ONLY SYSTEM FILES WILL BE UPDATED. YOUR DATA WILL BE UNTOUCHED.
5.Put your phone in download mode and flash the 4.4.2 stock boot.tar.md5 kernel and your phone will boot after a few minutes with root access enabled.
Enjoy.
Deleted. As I managed to do it.
TransformixS4 said:
Thank you!
Can't wait. When is the ETA? estimate, 10 minutes?
I just can't wait transforming my S4 to S5!
Edit: 40 minutes passed
Now it is probably close to me. I can feel it!
THANK YOOOOOOU!!!!!!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
Done writing a quick messy guide. If you have any questions let me know. Enjoy:laugh:
need to delete all again , But you save us again !
Thank you !!
I took the ATT 4.4 ota. Can I still perform this method? You discussed the 4.3 to 4.4 method but not from 4.4 to 4.4 rooted. Thank you!
Sent from my SAMSUNG-SGH-I537 using Tapatalk
EDIT: I reread your post and it looks like the instructions are assuming you took 4.4 already. Correct me if I'm wrong. Thank you.
Followed procedure from root ML2, and now the screen is just at the boot animation with blue led for about 5 minutes now, i messed up, need the 4.4.2 odin files
help
--------------------------------------------------------------------------------
hey I tried doing your root method after updating to 4.4.2 and after I flash the pwned file with odin everything goes fine but my usb debugging will not com up at all so I cant even root and im stuck with android version 4.3 but my baseband version is i537ucucn9 and that's 4.4.2 and nothing works no wifi no data no calls no nothing could you help or point me to anything cause I cant even use my phone. Thanks
Xanthos58 said:
Followed procedure from root ML2, and now the screen is just at the boot animation with blue led for about 5 minutes now, i messed up, need the 4.4.2 odin files
Click to expand...
Click to collapse
Same, need 4.4.2 odin files
primeboss said:
Same, need 4.4.2 odin files
Click to expand...
Click to collapse
Ok i got out of this state, you need the ML2 cp and csc files and the original kernel for ML2 flash them and youll be good
You guys should try flashing the 4.3 Odin package and starting from there. I know I have a lot of modified system apps, so I'm likely going to re flash 4.3 just to make sure I'm stock. Thanks again sunderwear!! Good luck rooting everyone. I'll post back with an update in a bit!!
Sent from my SAMSUNG-SGH-I537 using XDA Premium 4 mobile app
Xanthos58 said:
Followed procedure from root ML2, and now the screen is just at the boot animation with blue led for about 5 minutes now, i messed up, need the 4.4.2 odin files
Click to expand...
Click to collapse
primeboss said:
Same, need 4.4.2 odin files
Click to expand...
Click to collapse
You guys dont need to , just go to recovery and Factory Rest thats all , its happens to me too
what about us 4.2.2 stock rooted users?
I'm sure most S4 Active owners are still on 4.2.2 rooted. What is the best procedure for us?
Should i unroot my phone via SuperSU then accept the stock 4.4.2 OTA update, then follow the method in the OP?
Or can i leave it rooted and flash stock 4.4.2 via Odin and then follow the OP?
akjimbo said:
I'm sure most S4 Active owners are still on 4.2.2 rooted. What is the best procedure for us?
Should i unroot my phone via SuperSU then accept the stock 4.4.2 OTA update, then follow the method in the OP?
Or can i leave it rooted and flash stock 4.4.2 via Odin and then follow the OP?
Click to expand...
Click to collapse
I was in a similar position with being rooted on 4.3 ML2 (Sunderwear's method). I unrooted thru SuperSU, unfroze everything under TiBU, unchecked every module under xposed framework, reboot phone then proceeded to uninstall all my root apps. I then did a factory reset, then I flashed back to the stock 4.3 under ODIN and following that I took the 4.4.2 OTA successfully.
In the end it's up to you, but IMHO I consider it wise to begin anew with a fresh clean phone.
Yes if you get stuck after downgrading system you must do a factory reset otherwise you'll get stuck in the ATT LOGO.
sunderwear thank you I downloaded it kitkat zip file. I flashed it with safestrap and then I flashed suprSu then I reboot the phone won't boot ... I flushed with Odin the kernel 4.4.2 every things works greats
Sent from my SAMSUNG-SGH-I537 using xda app-developers app
tet1 said:
sunderwear thank you I downloaded it kikat zip file I flashed it with safestrap and the I flashed supruser I reboot my phone won't boot then I flushed with Odin the kernel 4.4.2 very things works greats
Sent from my SAMSUNG-SGH-I537 using xda app-developers app
Click to expand...
Click to collapse
Glad to hear it worked for you. REMEMBER EVERYONE YOU MUST FLASH THE KITKAT KERNEL AFTER FLASHING the kitkat.zip update.
I was on ML2 with root .. and I did the stapes above
Sent from my SAMSUNG-SGH-I537 using xda app-developers app
So I can't lock the screen no matter what it is set to. Any way to fix?
Sent from my SAMSUNG-SGH-I537 using XDA Premium 4 mobile app
Dear Note 4 Community -
Loved my Note until I decided to root it two weeks ago and "****ed her up.
Current status of my SM901-T:
Phone can run download mode.
Phone will launch TWRP.
Normal Boot launches a “recovery” screen which says “set kernel”
History of changes, as best I can remember in this long tangled narrative of "quickly rooting my note 4."
1) I use Chainfire's Auto root and end up with Bootloop.
2) I follow Chainfire's advice to try again but without "Autoreboot" selected, pull the battery, and boot into recovery to finish root. Still bootloop.
3) Tried again, failed. Still bootloop.
4) More internet searching. I find a Note 4 root guide GalaxyNote4RootGuide.com which explains that my kernel might be the issue??? I use Odin to flash TWRP and install a new kernel "EMOTION KERNEL" using TWRP and my microSD card. (Using PC slot and microSD adapter) TWRP installs successfully but rebooting still yields bootloop
5) At some point in this history I also wipe the cache and check some other boxes like "clear Davik" etc.
6) I download a stock firmware. Don't remember site. Again: Install it using TWRP and microSD card.
Cheers,
Arie Marie in New York
Use ODIN to flash to the latest official, then start fresh
**Update - Bootloop after failed root attempts
Hi -
Thank you.
Just to clarify I think you are saying, "download latest stock firmware/ROM for Note 4."
**Update 2 - Bootloop after failed root attempts
XDArieMarie said:
Hi -
Thank you.
Just to clarify I think you are saying, "download latest stock firmware/ROM for Note 4."
Click to expand...
Click to collapse
Kil4Thril said:
Use ODIN to flash to the latest official, then start fresh
Click to expand...
Click to collapse
It worked!!! Thanks again!
Dear newbs, do see how Arie Marie listed her issues? This is EXACTLY how you do it!! Model number, type of problem clear and concise perfectly stated! Props to you for this! None of this "my phone doesnt work help me" nonsense! This should be put into the stickies under "how to properly ask for help".