I have a Moto X that got the 5.1 OTA update. I is sorta bricked... I can get to the boot menu (can't ever seem to get it to go to the recovery screen). I can boot it up but all I have is the clock, and vibrations for notifications, and the "Power Off" pop up, other than that the screen is totally black. I have picture on it and other data that I would like to get, however, the phone did not have developer options or USB debugging turned on. I have tried a number of different things. I was hoping that I could use Odin to flash a recovery ROM to it and get into the phone that way. I have a recovery file, I have Odin, and I have a phone... still no luck though. Here is what Odin puts out:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> recovery.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
Any thoughts anyone? Thanks for the help!
Stop doing anything to your phone before you break it, and go read the stickies on how to properly flash recovery.
odin is for samsung, not motorola !!!!!!!!!!!
Related
Looking to restore my stock kernel (2.6.32.9 [email protected]#4) on my i9000m phone (UGKC1) from the hardcore speedmod kernel.
(The kernel is the total extent of modification to my phone. no rooting or custom roms installed)
Does anybody have the 2.6.32.9 [email protected]#4 kernel? Would I be able to flash it on my phone using ODIN?
Additionally, my swype no longer functions for reasons unknown to me. It just doesn't run- it is always giving the force close message.
Tried downloading various version, including the one that is listed in the swype program (2.9.51.13071). Each time the application fails to install.
Google searches recommend factory resets, clearing data in the application as well as the libcore.so. Both have been done, to no effect.
Any insight on how this problem may have come around? Advice on how to remedy this problem?
Thanks,
Mtz
Update- Tried flashing UGKC1 with ODIN, using the rom provided here (using the PDA, Phone and CSC files)
http://forum.xda-developers.com/showthread.php?t=1022445
but getting this message from ODIN
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_UGKC1.tar.md5 is valid.
<OSM> PHONE_UGKC1.tar.md5 is valid.
<OSM> CSC_BMCKC1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/018> Removed!!
With no apparent change to my phone at all.
What am I doing wrong?
Thanks,
Mtz
Maybe try another version of Odin. I know I had one that would always fail and it may have said something like that but I don't recall. I believe the kernel is the zimage in the .tar file so in theory you could delete the rest and re compress. You may want to look at heimdall as in that you can break out the files in .tar and only flash portions.
G
I just wanted to upgrade my phone from 2.2 to 2.3.3 and that what I got :
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_XWJVH_Sbl.tar.md5 is valid.
<OSM> PHONE_XXJVO.tar.md5 is valid.
<OSM> CSC_NEE_JV3.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
in the first time it shown me 1 fail
my phone is on Download Mode and connected with usb cable to my pc, the phone is not wiped and on debugging usb mode
remove the battery, wait five minutes and retry
Arnoj said:
remove the battery, wait five minutes and retry
Click to expand...
Click to collapse
I solved this, installed Dark Knight 5.5 and now the phone enters to recovery mode in the turn off and I get the message : E: Missing bitmap virtual_keys (code-1)
Hello, friends.
I've managed to pay and downloaded the latest firmware.
Please note, that it's not an update, you device will be renewed and all user data will be lost.
To install:
1. Extract TAR files from the RAR archives
2. Reboot the device to DOWNLOAD mode
HOW TO ENTER DOWNLOAD MODE ON SAMSUNG GALAXY TAB S 10.5
You must start by turning the Samsung Galaxy Tab S off completely. You can do that one of two ways: quickly press the Power button and then select the ‘Switch Off’ option from the menu. Alternatively, you can long-press the Power button and it will eventually turn off. Just make sure it’s not sleeping and is all the way off.
Now reboot the Samsung tablet holding the Power and Volume Down buttons. Some version might need the Power + Volume Down + Home button.
Wait for the screen to change before letting go of the buttons. You should see the screen telling you it’s ‘downloading’ .
Press the Volume Up button to continue past this point.
Once you have pressed the Volume Up button you should see the warning message leaving the Samsung tablets display.
Now you are ready to connect the Samsung Galaxy tab S to the computer and use the device in download mode
3. Connect the device to a USB port of PC
4. Download and run ODIN
5. Place
BL_T807AUCS1CPI9_CL9294073_QB11706463_REV00_user_low_ship.tar.md5 in the BL slot
AP_T807AUCS1CPI9_CL9294073_QB11706463_REV00_user_low_ship.tar.md5 in the AP slot
CP_T807AUCS1CPI9_CL9294073_QB11706463_REV00_user_low_ship.tar.md5 in the CP slot
CSC_ATT_T807AATT1CPI9_CL9294073_QB11706463_REV00_user_low_ship.tar.md5 in the CSC slot
6. click START
DOWNLOAD:
BL_T807AUCS1CPI9_CL9294073_QB11706463_REV00_user_low_ship.tar.rar
AP_T807AUCS1CPI9_CL9294073_QB11706463_REV00_user_low_ship.tar.rar
CP_T807AUCS1CPI9_CL9294073_QB11706463_REV00_user_low_ship.tar.rar
CSC_ATT_T807AATT1CPI9_CL9294073_QB11706463_REV00_user_low_ship.tar.rar
DONATE ME HERE IF YOU WANT TO BUY ME A BEER OR HIT THE THANKS BUTTON IF I HELPED YOU
Just don't flash the CSC part to keep data.
Loaded it and working fine here. Thanks!
Amazing
Just wanted to say thanks to you & @ashyx. Made a donation. Unfortunately, I didn't see either of your threads until today, as I had given up some time ago on anyone posting any workable images for the T807A! I do want to say to all that if there is a Samsung Experience Shop inside your Best Buy store they will update your device for free. It took them forever to find out where they had the images stored corporately but after several phone calls the proceeded to d/l & update my tablet. Took several hours but they did do it.
If I had seen your posts, I woud have done it myself. Much more fun to do!! Thanks again!
leswgnr said:
Just wanted to say thanks to you & @ashyx. Made a donation. Unfortunately, I didn't see either of your threads until today, as I had given up some time ago on anyone posting any workable images for the T807A! I do want to say to all that if there is a Samsung Experience Shop inside your Best Buy store they will update your device for free. It took them forever to find out where they had the images stored corporately but after several phone calls the proceeded to d/l & update my tablet. Took several hours but they did do it.
If I had seen your posts, I woud have done it myself. Much more fun to do!! Thanks again!
Click to expand...
Click to collapse
Many thanks. It's highly appreciated. Merry Xmas!
Excuse me for my ignorance but would this work with the SM-T800? And would I need to wipe everything? I would like to return to everything stock as if it were factory from an old version of IronRom I installed a while back.
Will I keep root?
If I flash this will I still be rooted? Thanks for this info. I was beginning to think I was stuck on kitkat forever.
P.S. I have no problem buying a few beers (or shots, hey its cold out man gotta warm up) for anyone helping me get an update on my device so that i can keep root.
Luigi_ said:
Excuse me for my ignorance but would this work with the SM-T800? And would I need to wipe everything? I would like to return to everything stock as if it were factory from an old version of IronRom I installed a while back.
Click to expand...
Click to collapse
No, this is for SM-T807A only.
Griefstruelove said:
If I flash this will I still be rooted?
Click to expand...
Click to collapse
Unfortunately this will remove root.
I would gladly make a donation but this is not working!
jb1974 said:
I would gladly make a donation but this is not working!
Click to expand...
Click to collapse
Explain 'not working'. Not enough info.
ashyx said:
Explain 'not working'. Not enough info.
Click to expand...
Click to collapse
This are the messages and a red FAIL!
<OSM> AP_T807AUCS1CPI9_CL9294073_QB11706463_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_T807AUCS1CPI9_CL9294073_QB11706463_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_ATT_T807AATT1CPI9_CL9294073_QB11706463_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1
---------- Post added at 10:33 PM ---------- Previous post was at 10:19 PM ----------
I see that the reactivation lock is ON.
is that related or the cause?
jb1974 said:
This are the messages and a red FAIL!
<OSM> AP_T807AUCS1CPI9_CL9294073_QB11706463_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_T807AUCS1CPI9_CL9294073_QB11706463_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_ATT_T807AATT1CPI9_CL9294073_QB11706463_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1
---------- Post added at 10:33 PM ---------- Previous post was at 10:19 PM ----------
I see that the reactivation lock is ON.
is that related or the cause?
Click to expand...
Click to collapse
Post a screen shot of the device screen.
SM-T807A MM Root?
AlexNI said:
Unfortunately this will remove root.
Click to expand...
Click to collapse
Is there a MM root yet for the SM-T807A?
Thanks! I needed to upgrade one of these. Sadly, it seems outdated firmware is the least of it's problems
Hey folks. So I'm trying to update the version of Oreo I'm running on my VZW Galaxy S8 but I can't seem to get Odin to work so I can revert back to Nougat BQL1. It keeps failing for some reason. Here's a copy of the log:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1205)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1205)..
<ID:0/006> File analysis..
<ID:0/006> skip file list for home binary
<ID:0/006> apdp.mbn
<ID:0/006> msadp.mbn
<ID:0/006> persist.img.ext4
<ID:0/006> Home Binary Download
<ID:0/006> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
Can anyone tell me what I'm doing wrong?
I had the same problem and then was told to try a usb 2.0 port which solved my issue.
https://forum.xda-developers.com/ga...pdragon-s8-t3700907/post75363170#post75363170
brdsng said:
I had the same problem and then was told to try a usb 2.0 port which solved my issue.
https://forum.xda-developers.com/ga...pdragon-s8-t3700907/post75363170#post75363170
Click to expand...
Click to collapse
Did what you suggested but I'm now in even deeper. While flashing the system.img to my S8, it hangs at a certain spot for hours on end. I spent all last night trying to get it to work but no luck. Now, I'm stuck with a "Software Update Failed" message on my screen.
[email protected] said:
Did what you suggested but I'm now in even deeper. While flashing the system.img to my S8, it hangs at a certain spot for hours on end. I spent all last night trying to get it to work but no luck. Now, I'm stuck with a "Software Update Failed" message on my screen.
Click to expand...
Click to collapse
Make sure if you are on Windows 10 that there are not updates available for your computer. If not try a different computer or shut down then restart your computer and start the whole process over. You should be able to get back into download mode on your phone.
jrcdpm said:
Make sure if you are on Windows 10 that there are not updates available for your computer. If not try a different computer or shut down then restart your computer and start the whole process over. You should be able to get back into download mode on your phone.
Click to expand...
Click to collapse
Been trying to get it to work but no luck. I've tried two different computers, a variety of different firmwares, and even the Verizon Software Repair Assistant with no luck. I'm really desperate at this point. I can't seem to find a solution to the problem I'm having.
[email protected] said:
Been trying to get it to work but no luck. I've tried two different computers, a variety of different firmwares, and even the Verizon Software Repair Assistant with no luck. I'm really desperate at this point. I can't seem to find a solution to the problem I'm having.
Click to expand...
Click to collapse
Have you tried a different version of Odin? I had very similar issues however, in the end, it was the usb cable.
I had the same issue. I had to reinstall the samsung drivers to my computer. Solved immediately.
dtroup64 said:
I had the same issue. I had to reinstall the samsung drivers to my computer. Solved immediately.
Click to expand...
Click to collapse
Also make sure u are trying reg Odin not comsy
I've been trying to go from crag to bql1 and I've been unable to. Same error as above, I'm using same laptop/port that got me to crag. I've tried another laptop and other parts and it just fails, same thing Everytime.
Using same Odin, original usb cable/same that got me to crag. Any ideas for me? Thanks
note 8 stuck on "An error has occured while updating the deivce software........"
Hello,
my phone (Galaxy note 8 SM-N950F) have problem that is stuck on screen "An error has occured while updating the device software.Use the Emergency recovery function in the smart Switch PC software"
i can't go to download/recovery mode ,cause when i tried to go to download mode my phone just reboot and when i tried to go to recovery mode my phone is still on that screen. I already use smart switch and that can't solve that problem
i hope you can't help me to fix
YukiArima said:
Hello,
my phone (Galaxy note 8 SM-N950F) have problem that is stuck on screen "An error has occured while updating the device software.Use the Emergency recovery function in the smart Switch PC software"
i can't go to download/recovery mode ,cause when i tried to go to download mode my phone just reboot and when i tried to go to recovery mode my phone is still on that screen. I already use smart switch and that can't solve that problem
i hope you can't help me to fix
Click to expand...
Click to collapse
Just plug it in to the computer and flash N950F firmware and just flash it on that error screen.. It will still flash on that screen.
MrMike2182 said:
Just plug it in to the computer and flash N950F firmware and just flash it on that error screen.. It will still flash on that screen.
Click to expand...
Click to collapse
thanks for your solution friend,but what i got is
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 5866 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and i already try 3 stock rom and all i got is same
YukiArima said:
thanks for your solution friend,but what i got is
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 5866 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and i already try 3 stock rom and all i got is same
Click to expand...
Click to collapse
Which bootloader version are you on and what firmware are you flashing?
For example:
If your on N950FXXU"6"DSF6 your on bootloader version 6 so I would flash any N950FXXU"6".... firmware, you can't flash any firmware below that, so no ver 5 or below
(N950FXXU"5"..... not going to flash). Same goes for 5 , 4 , 3, and 2 bootloaders can't downgrade to lower version!
If you're on multi-CSC OXM (csc N950F"OXM"U6DSF6) use any with the OXM in the firmware name.
Use the home-CSC to keep data intacted!
Or
Use the CSC file to erase data and go back to stock.
If you are coming from a carrier csc phone like OVF to OXM you have to use the CSC file.
Try another usb cable and/or usb port.
Please give more information:
What firmware you are on?
What CSC are you on?
What firmware you tried to flash?
Look at the Download mode screen for Bootloader version and CSC.
edit....
Look for the line:
RP SWVER B: 6 K: 1 S: 1 (the B: 6 is your bootloader version).
BluePhnx said:
Which bootloader version are you on and what firmware are you flashing?
For example:
If your on N950FXXU"6"DSF6 your on bootloader version 6 so I would flash any N950FXXU"6".... firmware, you can't flash any firmware below that, so no ver 5 or below
(N950FXXU"5"..... not going to flash). Same goes for 5 , 4 , 3, and 2 bootloaders can't downgrade to lower version!
If you're on multi-CSC OXM (csc N950F"OXM"U6DSF6) use any with the OXM in the firmware name.
Use the home-CSC to keep data intacted!
Or
Use the CSC file to erase data and go back to stock.
If you are coming from a carrier csc phone like OVF to OXM you have to use the CSC file.
Try another usb cable and/or usb port.
Please give more information:
What firmware you are on?
What CSC are you on?
What firmware you tried to flash?
Look at the Download mode screen for Bootloader version and CSC.
edit....
Look for the line:
RP SWVER B: 6 K: 1 S: 1 (the B: 6 is your bootloader version).
Click to expand...
Click to collapse
Which bootloader version are you on and what firmware are you flashing? i tried N950FXXU3BRA8_N950FOLE2BQKG_XID,N950FXXU3CRE5_N950FOLE3CRE5_XID,N950FXXU6DSF6_N950FOLE6DSF6_XID
what firmware you are on? i don't,cause i can't go to download mode and my phone is suddenly get error
what csc are you on? i don't
What firmware you tried to flash?N950FXXU3BRA8_N950FOLE2BQKG_XID,N950FXXU3CRE5_N950FOLE3CRE5_XID,N950FXXU6DSF6_N950FOLE6DSF6_XID,
have not tried bootloader 4 and 5
YukiArima said:
Which bootloader version are you on and what firmware are you flashing? i tried N950FXXU3BRA8_N950FOLE2BQKG_XID,N950FXXU3CRE5_N950FOLE3CRE5_XID,N950FXXU6DSF6_N950FOLE6DSF6_XID
what firmware you are on? i don't,cause i can't go to download mode and my phone is suddenly get error
what csc are you on? i don't
What firmware you tried to flash?N950FXXU3BRA8_N950FOLE2BQKG_XID,N950FXXU3CRE5_N950FOLE3CRE5_XID,N950FXXU6DSF6_N950FOLE6DSF6_XID,
have not tried bootloader 4 and 5
Click to expand...
Click to collapse
You can not get into download mode with power+bixby+vol-down at all?
Can you get into recovery mode?
If you can try doing a factory reset or selecting the option to boot into download mode.
Try using Samsung smart switch on pc to do a factory recovery.
Or visit a Samsung repair store.
plz help
hello i have the same problem & i did what you told him to do only that i didnt try flashing the stock firmware i tried flashing the rooted firmware that i origenaly wanted to flash now im stock at the upload screen and it wont boot to any other screen & how do i know what bootloader version it has BTW i didnt check or save any of the devices info ooops...:crying: and also i have a differnt version of note 8 it is the snapdragon version sm-n950u1 can you guys help plz??? Iv been at this for three days now & at this point i just want to get my phone up and running again so this is what it says..........=
[ UPLOAD MODE ]
Unknow Error
-------------------------------------------
DDR Vendor : Samsung
SOC_HW_REVISION : 2.1
skip print_summary_to_lcd...
Generating summary...
>>General Info
>>DDR Info
>>DCVS Info
>>RPM
>>TrustZone
>>Hypervisor
Done!
thanks in advance
mrbigruben said:
hello i have the same problem & i did what you told him to do only that i didnt try flashing the stock firmware i tried flashing the rooted firmware that i origenaly wanted to flash now im stock at the upload screen and it wont boot to any other screen & how do i know what bootloader version it has BTW i didnt check or save any of the devices info ooops...:crying: and also i have a differnt version of note 8 it is the snapdragon version sm-n950u1 can you guys help plz??? Iv been at this for three days now & at this point i just want to get my phone up and running again so this is what it says..........=
[ UPLOAD MODE ]
Unknow Error
-------------------------------------------
DDR Vendor : Samsung
SOC_HW_REVISION : 2.1
skip print_summary_to_lcd...
Generating summary...
>>General Info
>>DDR Info
>>DCVS Info
>>RPM
>>TrustZone
>>Hypervisor
Done!
thanks in advance
Click to expand...
Click to collapse
You are probably better off asking for help in the thread of the rom you tried to flash (try seaching on the thread for the same problem as yours first), or creating your own thread to ask for help.