I have install one of roms WM 6.0 from here on my MDA II and it was working. Then I've found a polonisation (cause I'm from poland) to it, and I installed it. MDA stopped working . I can turn it on but it stopping on the startscreen and I can't do nothing . I was trying everything- cold reset and even WM reinstallation. How can I turn it back to life?? plz help
P.S Sry for my english
Did u follow all the instructions correctly...Try to go into Bootloadermode (the basic settings to start the flashing) after that You have to hardreset your device.
Press ResetButton and hold down CameraButton + RecordButton.
Hold them pressed until the "Boot Options" menu appears on the screen.
Select the options as follows:
(for selecting use RecordButton, change values with CameraButton)
Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES
When done, press DPad and wait until OS starts.
Yeah, it's working now, thanks !!
you are most welcome
Hello Everybody!!!
Yesterday i`ve flashed my SGS from CM10 to the Stable 10.1 of CM.
Now i`ve got some Questions and hope someone can help me ...
First question is about the Hardware-Button "On/off".
In CM10 it was possible to Reboot to CMW-Recovery directly without pushing the combination of Vol+, Home-Button and On/Off-Button.
Is there any option to activate this function in the System-Menu???
Second question: In the settings I`m missing the "Performance" and the "Development Tools" - where you can regulate the CPU-Clokcing, I/O-Scheduler and so on. Are they removed from the settings or have i make a mistake while flashing/upgradinf to CM10.1
My telephone-number is not shown in the "Status-Menu"? Where can i enter my telephone number so that it will be show in the status-menu???
Last question Is there any file in the file-system where i can get the information about a) number of SMS sent and b) how many minutes i`ve telephoned in the current month? Is there any possibility??? In the Google Play Store there are some Apps - so the Apps must get the information, too!
CM10.1 on my device is stock!
Thank you very much and sorry for my bad English !!!
Hi
I hope I can help you.
1. There is the option to set up like that in most roms like aokp, it is generally found in the part of settings where you customize the look etc of the rom.
2.Cant help you with this one
3. Your number isnt always shown. I have never had my number shown no matter what device I am on but for you it might be that you have set your number to private
4.The apps on play store actually keep track of the time spent themselves or they add them up
ngeumnt than
Hi,
at first thank you for your reply ...:good:
1. Okay i will get through the hole menu and hope i find some option to enable "reboot in Recovery"
In the main menu of CM10.1 ==> "System" ==> "On-/Off-Button" are the following options:
- Reboot-Menu (it is active) ==> i think this is the option, but there is only the choice "Reboot" when pushing On-/Off-Button
- Screenshot (active, too!)
- Extended Desktop (disabled)
- Profile-Changing (diabled)
- Airplanemode (disabled)
- Silence (diabled)
2. All of my questions i want to post in "Galaxy S I9000 Android Development > [NIGHTLY][ROM][4.2.2] CyanogenMod 10.1 for Samsung Galaxy S" - but i`m a newbie with Posts < 10, so i couldn`t post it there :crying:
3. Okay that appease me, but what do you mean with "might be that you have set your number to private" ??? How can i do this ??? Is there an option, or do you mean "Caller-ID for outgoing calls" ??? I have tested with showing the number, but it doesn`t change something....
4. Okay there is no recording in the filesystem, instead the apps recording it by themselves ...do you have an recommendation for a app?
Hello again ...
the answer for my Question 1 and 2 is so easy, when you know it ... :cyclops:
To activate the additonal Option-Menus "Performance" and "Developer-Options" you only have to go to the "System-Options" ==> "Over the Device" ==> now you click 7-times on the build-number ...after 3-4 times a text like this is shown "you need only 3 times to be a developer...."
And now magic ...
==> You have the additonal Menus "Performance" where you can adjust CPU-Clocking, I/O-Scheduler and the "Developer-Options" where you can extend the "Reboot-Menu for Boot in Recovery"...
Some things can be so easy when you know .........
Regarding the call recorder thing sadly I cannt recommend as I haven't tried any, I just know from working on roms this info isn't collected by the rom, if you hold in the power button and click on reboot does it give you the option or does it just reboot
No Problem i will test some apps :good:
When you hold the On-/Off-Button and touch on the Option "Reboot" you get two Options "Reboot or Recovery". Then you take the option "Recovery" and push on the "OK"-Button and after a few seconds you get in the CWM-Recovery ...
Do you get the "Recovery-Option" ???
I'm not exactly sure if you asking me if I have the option or how to get it. What u saying is right you should get a recovery option there. My android broken, currently on blackberry so no I don't get the option.
My first question was ,how i can get the option "Reboot in CWM-Recovery" back.
But now (after the trick with pushing 7times on the Build number of cm10.1) i can activate the additional option for my On-/Off-Button.
Oh okay i thought you`re sentence "if you hold in the power button and click on reboot does it give you the option or does it just reboot" was a question...so i wrote the option you get qwhen you activate this function....
But now everything is clear and all works fine :good::good: ...
You`re android is broken? But you will get back to Android???
Yeah my galaxy s, my usb port is shorting ouit so it can't charge, just needa flash stock rom and send it in sometime
Oh that`s bad ...the original Stock Rom you can get on http://www.sammobile.com/firmwares/
But it i think you know the site
Yeah I know it, I had most of them but windows got corrupted and had to format. just needa download it, thanks anyway
I want to restart GPS signal thru Service Mode by doing following steps:
-> type *#0011#
service mode shows up
-> menu press Back
-> menu Key Input enter Q
-> menu Key Input enter 0000
wait
After performing fallowing steps I can see "quick flash screen" it's like want to show me Main Menu but it can't.
Is T-mobile blocking access to main menu? I read on S4 to overcome this new modem is needed.
I'm on COG2, Emotion kernel r21, Rapture 8.2 ROM
Hello to everyone, Im posting here because I cannot make a question to the post related to what I need (http://forum.xda-developers.com/cro...ad-progress-please-leave-im-updating-t2871269), sa basically, I need to unlock the GSM 1900 band to use it in Chile (Entel company).
What do I need? Im still having some problems about understanding the adb terminal. Can someone help me with this please?
These are the steps to unlock the bands **My doubts are in red-bold and enumerate**
"Download this zip Google it as it's banned from xda for the ability of imei change
2. Extract it and install QPST from that zip
3. Open the caller app and type in *#*#8778#*#* (it should go off the screen after you type in the last symbol "*"
3.5 Those on custom roms (tested on cyanogen 11 with s4 mini) can use the efs professional toolkit to change the mode to enable the diag port.(Thanks @blackburn !)
4. Connect your phone to your PC ( 1)HERE, in which mode do I have to connect my phone to the computer?)
5. Open ADB console ( 2) From the folder of the adb program, right? pressing SHIFT + RIGHT CLICK?)
6. Type in these commands: ( 3) Can I type these commands from my phone? from the Terminal Emulator for example? Like in the step 34 of this guide???)
Code:
adb shell
su
setprop persist.usb.eng 1
Click to expand...
Click to collapse
7. Turn off USB Debugging, Disconnect your phone from the PC
8. Wait about 10 seconds (don't have to be exact, just let it all disconnect in the PC) and turn USB Debugging back on
10. Connect it back to the PC. It should try to install drivers. Wait until it fails to install all of them.
11. Open device manager - you will see your device model a few times. Go to details tab. Scroll down a single time on that tab. You will see MI_0x there.
12. Go through those devices until you find MI_04 under the second drop down position. ( 4)For what does this MI_04 stands for?)
13. Select "update driver" for this device and install the htc driver from the zip.
14. Press start button and navigate to QPST -> QPST Configuration
15. Go back to device manager -> modems -> HTC
16. Find "COM*" in my case it was "COM3". It might be different for you.
17. In QPST Configuration click on "Add new port" and in "Port" type in your "COM*". In my case It's "COM3" in there. In Port label it could be anyting u want. In my case I used a Z1 so I typed IN "Z1".
18. It should look like this now.
19. Navigate to QPST/bin and open RV_NV_Manager.exe
20. press on settings -> Comport and choose your COM port.
21. Press on file -> read from phone
22. Wait patiently until it is finished. Now pay attention!
23. Go to line 1877, click it and copy the decimal number on the right side of a programme. right click - copy
24. Go to the place where you extracted the zip from the first step and start mzTool
25. On the left side you will see "Input radix" - press decimal there. ( 5) For example, if the hole number is "153546.256", the decimal should be "256", right?
26. On the right side you will see "RF BC CONFIG" paste your previously copied number from the RV_NV_Manager.exe there.
27. You will see now what bands are you able to use on the bottom of the app in "Bit information"
28. Switch tab to "Band Preference (NV Value)"
29. In there select all GSM bands and WCDMA bands. This place is really a field of testing. In my case (C6903 LTE) I selected all of GSM and WCDMA. I wouldn't suggest you to do anyting else in here unless you know what your'e doing. Let me know if you got something interesting in there.
30. After you're done choosing what bands do you want - copy decimal number from the bottom right ( 6) Here I really need and example or a major explanation, in macro detail :c)
31. Remove all commas from that number ( "," ) so it would be just a bunch of numbers without anything else. ( 7) A bunch of number like this 524356??
32. Open RV_NV_Manager.exe from the point you left it (step 23) and paste your new number without commas "," there.
33. Press on write NV and then press on file ->write changed NV to the phone.
34. Open up the terminal emulator on your phone and write there this: ( 8) This is what I was refering to! Why it can be done directly from the phone? Can I do the step 6 from the Terminal Emulator of the phone too??)
Code:
su
setprop persist.usb.eng 0
Click to expand...
Click to collapse
35. Reboot the device and hope you'll have the reception. If you do, hooray!
36. Type in *#*#SERVICE#*#* (*#*#7378423#*#*) to see your new bands that your phone can use! "
Please help me! I have a basic, baaasic knowledge about this, and there are no videos for the Sprint m8 version :c
If Im posting in a wrong category, my apologies, but I cant comment in the real guide-post to get assitance :c
Thanks in advance.
- Conchetumare celular culiao :crying: -
.
Anyone? Just that simple? come on :c!!!!!!!!!!!!!
..
So many thanks ah...
hey guys please tell me how to fix IMEI permanently, and my signal reception is very poor , is anyone facing this problem?:crying:
i have the same problem when i try to put imei code through chamelophone in android nougat roms
no signals are showing and also no imei code :crying::crying::crying::crying:
Requirements:
- MobileUncle Tool apk.
- Your IMEI number(you can find it below the battery)
How to:-
1.Run MobileUncle Tool
2.Enter Enginering Mode
3.Choose Enginering Mode (MTK)
4.Choose Tab Connectivity
5.Choose CDS Information
6.Choose Radio Information
7.Choose Phone 1,
Write on the row:
AT + EGMR = 1.7, "IMEI_1 NUMBER"
- Press SEND AT COMMAND
NOTE : double inverted quotes are part of the code.and there should be a space between AT and +.
8. For Phone 2,
write:
AT + EGMR = 1.10, "IMEI_2 NUMBER"
Press SEND AT COMMAND
9. Restart Phone
Dial *#06# and check your IMEI.