Database Develop

[Q] [HELP] XT1068 bricked (clean version)

Hey guys,
this morning I was using my Moto G when it suddently went black. When i try to turn it on the moto logo appears but it stays there forever. The power+volume down thing works, so from what I searched it must be a softbrick.
Unfortunatly I'm a total noob in this area and I'm kind of afraid to follow any tutorials on the web and brick it for good.
It's on Lollipop and completely clean btw (no roots no wierd stuff inside). And since I'm not in my home country I would like to avoid sending it there to warranty.
Thanks in advance!

Follow these instructions for XT1068 2nd gen
https://motorola-global-portal.custhelp.com/app/answers/prod_answer_detail/a_id/99825/p/30,6720,9151

Thank you so much, worked like a charm! :good:

Moto X 2014 Dead after 5.0 lollipop OTA Update

Hi guys, i hope someone can help. I have the XT1092 variant of the Moto X with Kitkat out of the box, i upgraded to lollipop 5.0 then to 5.1 all via OTA. I then ulocked the bootloader , rooted the device and installed unofficial version of Euphoria 5.1.1 unfortunately i never backed up the stock rom. I then ran into some issues with call quality, no matter who i spoke to they all complained that my voice was fading in and out. I also noticed that whilst on a call whenever i spoke over the top of someone they were also fading in and out like the volume increased via the earpiece every time i spoke. I believed this to be a hardware issue but wanted to confirm this by going back to stock. So i managed to find the EU version of kitkat 4.4.4 which matched my device, using mfastboot i proceeded to flash each file individually which it happened to be that the downgrade went well, but this still did not fix my issue with the fading in and out during calls. I then had the OTA update come through on the device so i decided to go back to stock lollipop 5.0 in hope that this would fix the issue, the download went well the phone then rebooted and started the installation. About half way through i noticed that the screen was black so i naturally pressed the power button but no response, i have tried everything from here that i can think off. I have tried hard reseting using the ppower button and volume button to access bootloader i have also attempted adb & fastboot commands but my device is not registering on the pc the only prompt that came up after plugging it in to my pc was an installation of some foreign driver known as 'Forge HS-USB QDLoader 9008 (COM4)'??? The only response i now get from my MotoX is a green led that comes on for a few seconds and disappears shortly after, and that's only when i hold the power button down for 10 secs to perform a hard reset and only when it is connected to a power outlet or my pc otherwise doing the hard reset unplugged i dont even get the green led at all. The device had almost 100% battery when i performed the upgrade. Have i bricked my device, is there any hope in getting it back up again? Is there a toolkit or something i can use to revive it. Your help would be really appreciated it, ive only had the device for approx 2 weeks and it was purchased on ebay from a private seller brand new sealed in the box, so no warranty

this is the version of kitkat i downgraded with, i took a screenshot before i upgraded again via OTA to lollipop.

occtec said:
Hi guys, i hope someone can help. I have the XT1092 variant of the Moto X with Kitkat out of the box, i upgraded to lollipop 5.0 then to 5.1 all via OTA. I then ulocked the bootloader , rooted the device and installed unofficial...(
Click to expand...
Click to collapse
Unfortunately, you have a brick. That USB QDloader registering on your PC is a dead giveaway. We have no way of helping you recover from this.
Sent from my XT1095 using Tapatalk

dustin_b said:
Unfortunately, you have a brick. That USB QDloader registering on your PC is a dead giveaway. We have no way of helping you recover from this.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
bummer, cheers

Why did you downgrade to KitKat when you have lollipop images ???
Sent from my XT1092 using XDA Free mobile app

Unfortunately, its hard brick and up until now there is no solution yet for this problem, untill someone leak the blank flash file for moto x 2014.
Sent from my XT1095 using Tapatalk

I'm surprised that the phone didn't brick the first flash back to kit kat. Ya the mistake was not downgrading the bootloader first, which can be risky
---------- Post added at 10:20 AM ---------- Previous post was at 10:16 AM ----------
If I were you I would sell for parts on eBay, or even buy a cracked moto x and take your screen. I did that when my WiFi and Bluetooth went, just bought a cracked screen moto x for 50 bucks. Moto x screens are over 200$ and there is a lot of broken phones

Or sell my your screen for my xt1092 phone make my happy !

Moto X XT1095- Bricked, Computer Sees It As "qhsusb bulk"

Hard brick XT1095
I just recently bricked my moto x trying update it. I'm hoping there's. Solution but I can't find anything. It won't turn on or go into the boot loader and when I plug it in the computer it shows up as "qhsusb bulk".

BlastBlink said:
I just recently bricked my moto x trying update it. I'm hoping there's. Solution but I can't find anything. It won't turn on or go into the boot loader and when I plug it in the computer it shows up as "qhsusb bulk".
Click to expand...
Click to collapse
Its hard brick, and currently no solution yet for our moto x 2014 except give it to motorola service center to repair it.
Sent from my XT1095 using Tapatalk

Moto x 2nd generation hard bricked(xt1092)

Hi there,
I bought a moto x 2nd gen from India. i just rooted it and update it to cm13. when my phone got official update of marshmallow i just used moto x multi tool to downgrade it..first i downgraded it to kitkat. it done versy smoothly and i got my phone with kitkat. Next again i used same tool to upgrade it to lolipop. i checked whether my usb debug is on or not..it was on..then when i upgraded it it just done successfully and when i reboot my phone from fastboot mode it doesn't boot up...no it is hard bricked...only green light is blinking when hold the power button and when plug it to pc..when i google it i saw that many people have got this problem..all are nee blank flash file..so is there any solution for this??? i have got a stock lolipop zip file....can anyone help me????

Hi!
This is the wrong section for help. Your device has a section here, http://forum.xda-developers.com/moto-x-2014
And you can post questions here, http://forum.xda-developers.com/moto-x-2014/help
And specific to your issue, you can review this thread here, http://forum.xda-developers.com/moto-x-2014/general/warning-downgrade-bootloader-partition-t3105147
Good luck!

Hi guys,
I bought a moto Xt1092 from India. i just rooted it and install cm14.1. but,jio4gvoice not working cm14.1. then I install stock rom kitkat my phone and got official update of marshmallow. i just update system software and install it. then software full installation complete and my phone shut sown and can't on my phone.when phone is charging then green light blinking. and not show bootloader menu either recovery menu.can anyone help me want to bootloader menu return????plzzzz anybody help me.

My MOTO G XT1033 Frez on Boot Screen How to Fix?

Hello,
My moto g XT1033 Dual Sim phone Just Stuck on boot screen, When ever i tryed to turn it off just restarts with same results screen with motorola logo and a vibration thats it nothing else.
BTW my phone is charging its ok no charging issue.
Ive tried Factory reset but no use.
my phone isnt unlocked and cant do that bcz boot loder page in motorola website cant open.
please help me to fix it.
thanks.

You should go to the appropriate forum first.

You'll find the answer here on Moto G 2013 forum:
http://forum.xda-developers.com/moto-g