Database Develop

Moto X won't turn on

I was rooting my phone I got to the point where I accepted the 4.4 update it downloaded installed shut off and that was it. I have tried every button combination, It had plenty of charge, and just to make sure I plugged it into a wall charger for 20 minutes. Any suggestions? The screen doesn't come on at all. Thanks, Garrett.

Follow the instructions on how to enter stock recovery. This should help.
https://motorola-global-portal.custhelp.com/app/answers/prod_answer_detail/a_id/94946/p/30,6720,8696
Sent from my XT1060 using Tapatalk

Still no luck...

garrettpen said:
Still no luck...
Click to expand...
Click to collapse
Sorry bud. Sounds like you might have bigger issues than I can help you with. However, you should try to connect it to your computer and see if you get anything. Also keep trying to power it on while on a USB or charger.
Hopefully someone with a similar experience can chime in.
Sent from my XT1060 using Tapatalk

http://forum.xda-developers.com/showthread.php?t=2477132
You can try to flash your phones stock ROM using this tool kit if you can get into the Boot loader. I just used it to flash back to stock on my sprint moto x. I know you are in a different situation but I can't hurt to try
Sent from my XT1056 using Tapatalk

garrettpen said:
I was rooting my phone I got to the point where I accepted the 4.4 update it downloaded installed shut off and that was it. I have tried every button combination, It had plenty of charge, and just to make sure I plugged it into a wall charger for 20 minutes. Any suggestions? The screen doesn't come on at all. Thanks, Garrett.
Click to expand...
Click to collapse
hold power button for 1 min if you feel the phone vibrate that is good.
now try holding Volume Up + Power will it boot into the bootloader.
If yes great time to restore to stock
If No then your phone is hard bricked and you will have to get it replaced.
one easy way to find out if your phone is hard bricked is to plug it into the computer and see what drivers it tries to install
if it say qhsusb_dload then i know for a fact that your phone is Hard bricked.
If that is the case call your carrier or go to a local store and tell them that your phone was on 4.2.2 and you downloaded the 4.4 OTA and it rebooted to install it and now it won't turn on at all they should give you a brand new phone because it was the phones problem.
When you get your new phone please post here first with What Carrier Moto X you have and what android version it is on 4.2.2 / 4.2.2 Camera Update / 4.4. and i will help you get your phone rooted and up and running correctly
Good Luck My Friend and please don't be afraid to ask for help

Mist likely hard bricked, you're not the only person this has happen too and won't be the last, if you're getting the driver mussing as previously posted ,I agree and its hard bricked. Which 4.2 stick firmware where you on? Pre camera update? At least you can call you're carrier and say you attempted to install an ota which in fact did brick your phone don't tell them you tried to root it of course, good.luck
Sent on my Moto X

[Q] Moto X Brick not even "QHSUSB_DLOAD"

Hello Guys,
i bought a bricked Moto X and now trying to bring it back to life.
I can´t turn it on.
I don´t get into fastboot.
PC recognizes nothing when I plug in the device, not even the "QHSUSB_DLOAD" thing in the device manager.
Only the green led turns on, when I insert the charger.
The seller told me, that the device bricked while trying to downgrade from LP to KK.
Is there any hope to rescue the Moto X?
Thanks!

Have you tried?
http://forum.xda-developers.com/showpost.php?p=60224688

Thank you for the link.
that won´t be easy. I never opend a device

Moto X 2014 Dead after 5.0 lollipop OTA Update

Hi guys, i hope someone can help. I have the XT1092 variant of the Moto X with Kitkat out of the box, i upgraded to lollipop 5.0 then to 5.1 all via OTA. I then ulocked the bootloader , rooted the device and installed unofficial version of Euphoria 5.1.1 unfortunately i never backed up the stock rom. I then ran into some issues with call quality, no matter who i spoke to they all complained that my voice was fading in and out. I also noticed that whilst on a call whenever i spoke over the top of someone they were also fading in and out like the volume increased via the earpiece every time i spoke. I believed this to be a hardware issue but wanted to confirm this by going back to stock. So i managed to find the EU version of kitkat 4.4.4 which matched my device, using mfastboot i proceeded to flash each file individually which it happened to be that the downgrade went well, but this still did not fix my issue with the fading in and out during calls. I then had the OTA update come through on the device so i decided to go back to stock lollipop 5.0 in hope that this would fix the issue, the download went well the phone then rebooted and started the installation. About half way through i noticed that the screen was black so i naturally pressed the power button but no response, i have tried everything from here that i can think off. I have tried hard reseting using the ppower button and volume button to access bootloader i have also attempted adb & fastboot commands but my device is not registering on the pc the only prompt that came up after plugging it in to my pc was an installation of some foreign driver known as 'Forge HS-USB QDLoader 9008 (COM4)'??? The only response i now get from my MotoX is a green led that comes on for a few seconds and disappears shortly after, and that's only when i hold the power button down for 10 secs to perform a hard reset and only when it is connected to a power outlet or my pc otherwise doing the hard reset unplugged i dont even get the green led at all. The device had almost 100% battery when i performed the upgrade. Have i bricked my device, is there any hope in getting it back up again? Is there a toolkit or something i can use to revive it. Your help would be really appreciated it, ive only had the device for approx 2 weeks and it was purchased on ebay from a private seller brand new sealed in the box, so no warranty

this is the version of kitkat i downgraded with, i took a screenshot before i upgraded again via OTA to lollipop.

occtec said:
Hi guys, i hope someone can help. I have the XT1092 variant of the Moto X with Kitkat out of the box, i upgraded to lollipop 5.0 then to 5.1 all via OTA. I then ulocked the bootloader , rooted the device and installed unofficial...(
Click to expand...
Click to collapse
Unfortunately, you have a brick. That USB QDloader registering on your PC is a dead giveaway. We have no way of helping you recover from this.
Sent from my XT1095 using Tapatalk

dustin_b said:
Unfortunately, you have a brick. That USB QDloader registering on your PC is a dead giveaway. We have no way of helping you recover from this.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
bummer, cheers

Why did you downgrade to KitKat when you have lollipop images ???
Sent from my XT1092 using XDA Free mobile app

Unfortunately, its hard brick and up until now there is no solution yet for this problem, untill someone leak the blank flash file for moto x 2014.
Sent from my XT1095 using Tapatalk

I'm surprised that the phone didn't brick the first flash back to kit kat. Ya the mistake was not downgrading the bootloader first, which can be risky
---------- Post added at 10:20 AM ---------- Previous post was at 10:16 AM ----------
If I were you I would sell for parts on eBay, or even buy a cracked moto x and take your screen. I did that when my WiFi and Bluetooth went, just bought a cracked screen moto x for 50 bucks. Moto x screens are over 200$ and there is a lot of broken phones

Or sell my your screen for my xt1092 phone make my happy !

Is my Moto G 2014 (XT 1068) officially dead?

Hi guys!
After a try to update my XT1068 to Android 6.0, something gone wrong. Then, i tried to start all over again, but, at some point, during an installation (the image was the android robot with his stomach open...lol), he turned off.
Now, even with full battery, he doesnt start. Even the LED works. But when i plug it to my notebook, in the device manager, it appear as "qhsusb_bulk".
So, can I send it to the trash and buy a new one?
Or is there anyway to revive it?
Thank you guys and sorry for my shameful english!

Hugo_Xnaider said:
Hi guys!
After a try to update my XT1068 to Android 6.0, something gone wrong. Then, i tried to start all over again, but, at some point, during an installation (the image was the android robot with his stomach open...lol), he turned off.
Now, even with full battery, he doesnt start. Even the LED works. But when i plug it to my notebook, in the device manager, it appear as "qhsusb_bulk".
So, can I send it to the trash and buy a new one?
Or is there anyway to revive it?
Thank you guys and sorry for my shameful english!
Click to expand...
Click to collapse
There is no official 6.0 for the moto G 2014 yet. So i wonder how you installed it.
The android robot is because you don't have a custom recovery installed, you can install that and flash another rom or you can use the recovery tool to revert it to stock lollipop.

Hugo_Xnaider said:
Hi guys!
After a try to update my XT1068 to Android 6.0, something gone wrong. Then, i tried to start all over again, but, at some point, during an installation (the image was the android robot with his stomach open...lol), he turned off.
Now, even with full battery, he doesnt start. Even the LED works. But when i plug it to my notebook, in the device manager, it appear as "qhsusb_bulk".
So, can I send it to the trash and buy a new one?
Or is there anyway to revive it?
Thank you guys and sorry for my shameful english!
Click to expand...
Click to collapse
>qhsusb_bulk
Yes it is dead.

Try to for press power button for 60 seconds ( 60!)
Sent from my Moto G 2014 LTE using Tapatalk

Hugo_Xnaider said:
Hi guys!
After a try to update my XT1068 to Android 6.0, something gone wrong. Then, i tried to start all over again, but, at some point, during an installation (the image was the android robot with his stomach open...lol), he turned off.
Now, even with full battery, he doesnt start. Even the LED works. But when i plug it to my notebook, in the device manager, it appear as "qhsusb_bulk".
So, can I send it to the trash and buy a new one?
Or is there anyway to revive it?
Thank you guys and sorry for my shameful english!
Click to expand...
Click to collapse
i've got the same problem, we need a "blank flash" image to make it work again. I don't really know what it is but the thing i know is that we don't have it for the moment. It already exists for the Moto G 1st gen ^^
keep your phone don't send it to the trash and maybe with some luck we'll get this blank flash ^^

Miiick3y said:
i've got the same problem, we need a "blank flash" image to make it work again. I don't really know what it is but the thing i know is that we don't have it for the moment. It already exists for the Moto G 1st gen ^^
keep your phone don't send it to the trash and maybe with some luck we'll get this blank flash ^^
Click to expand...
Click to collapse
I've bought a Moto G 3 Turbo Edition...but will wait for this blank flash and, with some luck, sell the Moto G anyday :good:

luca020400 said:
Try to for press power button for 60 seconds ( 60!)
Sent from my Moto G 2014 LTE using Tapatalk
Click to expand...
Click to collapse
What will happen after the 60 sec on a non broken device?

doppelhelix said:
What will happen after the 60 sec on a non broken device?
Click to expand...
Click to collapse
Device will reboot
Sent from my Moto G 2014 LTE using Tapatalk

luca020400 said:
Device will reboot
Sent from my Moto G 2014 LTE using Tapatalk
Click to expand...
Click to collapse
Oh. Much excitement. Such astonishment. WOW

My MOTO G XT1033 Frez on Boot Screen How to Fix?

Hello,
My moto g XT1033 Dual Sim phone Just Stuck on boot screen, When ever i tryed to turn it off just restarts with same results screen with motorola logo and a vibration thats it nothing else.
BTW my phone is charging its ok no charging issue.
Ive tried Factory reset but no use.
my phone isnt unlocked and cant do that bcz boot loder page in motorola website cant open.
please help me to fix it.
thanks.

You should go to the appropriate forum first.

You'll find the answer here on Moto G 2013 forum:
http://forum.xda-developers.com/moto-g