Hi,
I've got a problem with my Honor 3c.
When I'm trying to connect it without battery to unbrick it in program Smart Phone Flash Tool it is only like on the screenshot. Phone vibrating every 5 seconds. I've got drivers. Maybe you know what to do?
Solution
Try with the battery inside. I had the same issue, inserting the battery solved the problem
1.Turn off phone and remive battery then disconnect all usb connections from phone
---------- Post added at 09:33 ---------- Previous post was at 09:33 ----------
2.Connect usb cable with phone without battery
---------- Post added at 09:34 ---------- Previous post was at 09:33 ----------
3. Press Download on sp flash tool then insert battery
Post outcone?
I passed this step, I am stuck with next step
Fixed it?
looks like problem with scatter file.
Related
I cant enter usb host mode
I m currently trying to lower my bootloader by using the goldcard method
When i turn off my phone and hold the power, camera and vol down.
My phone doesnt boot in to usb host mode but it shows a picture of a phone connecting to a pc
Please help me guys
Thanks in advence.
you need to hold the camera and volume down button and the press the power on button.....it should start with the tri color screen and a second later you enter USB host mode....until u enter dont leave any button....
---------- Post added at 10:51 PM ---------- Previous post was at 10:47 PM ----------
read the comments in the goldcard thread....that might help you in sorting out the problem
The last thing i tried doing was to restore a backup from CWM.
After restoring it goes on bootloop.
yes, i tried to go to recovery, it doesnt..
yes, i tried to go to flashmode, it doesnt work..
All it does is show the SONY logo, and restart again and again..
i need to fix this ASAP, so anyone who has an idea, please let me know ..
Use Flashtool to install a stock firmware.
WhiteNeo said:
Use Flashtool to install a stock firmware.
Click to expand...
Click to collapse
Hi, I rooted my phone using towelroot and and then i changed my dpi to 300 which is not supported by my phone.. THE specific phone details
DETAIL:
-It is Locked
-I cannot enter recovery mode
-I cannot enter fastboot
-My usb debugging mode is off..
-im on bootloop
pls help :/ I want my phone back
Rakistako said:
Hi, I rooted my phone using towelroot and and then i changed my dpi to 300 which is not supported by my phone.. THE specific phone details
DETAIL:
-It is Locked
-I cannot enter recovery mode
-I cannot enter fastboot
-My usb debugging mode is off..
-im on bootloop
pls help :/ I want my phone back
Click to expand...
Click to collapse
Maybe you could try repairing the software via pc companion?
can You pls give me a link or a video ?
---------- Post added at 10:37 AM ---------- Previous post was at 10:30 AM ----------
SteCole77 said:
Maybe you could try repairing the software via pc companion?
Click to expand...
Click to collapse
'
so i tried what u have said and it says here that "pc companion was not able to connect to the phone.
---------- Post added at 11:31 AM ---------- Previous post was at 10:37 AM ----------
WhiteNeo said:
Use Flashtool to install a stock firmware.
Click to expand...
Click to collapse
can you pls guide me all the way ? :/
Rakistako said:
can You pls give me a link or a video ?
---------- Post added at 10:37 AM ---------- Previous post was at 10:30 AM ----------
'
so i tried what u have said and it says here that "pc companion was not able to connect to the phone.
---------- Post added at 11:31 AM ---------- Previous post was at 10:37 AM ----------
can you pls guide me all the way ? :/
Click to expand...
Click to collapse
Try this thread, it should hopefully guide you all the way...
[GUIDE] Recover 2012 and newer XPERIAs from SOFT-brick
All the best!!
SteCole77 said:
Try this thread, it should hopefully guide you all the way...
[GUIDE] Recover 2012 and newer XPERIAs from SOFT-brick
All the best!!
Click to expand...
Click to collapse
thanks xD
So I am currently in the process of trying to flash a recovery drive onto my samsung galaxy mini however whenever i connect my phone in download mode my computer says windows can not recognise the device however it recognises my device when in all other modes. I have tried re installing drivers factory and resetting my phone several times. Please help if you know how! Thanks
P.s. I have attached a picture of the message i am given.
So maybe you don't install driver phone yet , right ?
---------- Post added at 04:06 PM ---------- Previous post was at 04:05 PM ----------
Or should maybe try restart your computer to give all drivers read properly into your system computer .
thanks but didn't help
Thanks for the advice but it didn't work, p.s. what do you mean about not installing drivers yet, they are required
Also the problem is that my computer detects the phone but can't read it essentially
plz I need to fix Sony Xperia device c5302 died boot after flash it
I tried the solution on the following link but did not work
http://forum.gsmhosting.com/vbb/f778/sony-xperia-sp-c5302-c5303-c5306-m35h-dead-boot-repair-1876385/
logo
2/10/2014 9:24:09 PM Welcome to S1 tool.
12/10/2014 9:24:09 PM That is small and crippled subset of SETOOL2 service tool.
12/10/2014 9:24:11 PM
12/10/2014 9:24:11 PM SELECT FIRMWARE PACKAGES
12/10/2014 9:24:11 PM YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON
12/10/2014 9:24:17 PM CHECKING PACKAGES ...
12/10/2014 9:24:17 PM
12/10/2014 9:24:17 PM DETACH USB CABLE FROM PHONE
12/10/2014 9:24:17 PM REMOVE BATTERY FROM PHONE
12/10/2014 9:24:17 PM ATTACH TESTPOINT
12/10/2014 9:24:17 PM PRESS "READY", THEN ATTACH USB CABLE TO PHONE
12/10/2014 9:24:17 PM
12/10/2014 9:28:27 PM will use DLOAD protocol ...
12/10/2014 9:28:27 PM 0808010600900000
12/10/2014 9:28:28 PM 0D0F50424C5F446C6F6164564552322E30
12/10/2014 9:28:28 PM 162001000100
12/10/2014 9:28:28 PM 17004001000100E1108800
12/10/2014 9:28:28 PM 1801000F43240892D02F0DC96313C81351B40FD5029ED98FF9EC7074DDAE8B05CDC8E1
12/10/2014 9:28:28 PM PHONE NOT SUPPORTED IN THIS MODE
12/10/2014 9:28:28 PM Elapsed:256 secs.
Whoa, are you sure you are using the right software? Seems to me it isn't..
Though I respect alternatives, however, I have no experience with the software you used.
Would you fancy to try Flashtool instead?
flamingwolf said:
Whoa, are you sure you are using the right software? Seems to me it isn't..
Click to expand...
Click to collapse
TechnoSparks said:
Though I respect alternatives, however, I have no experience with the software you used.
Would you fancy to try Flashtool instead?
Click to expand...
Click to collapse
but ican't go to flash mode or fastboot mode How can I work Software or to Custom Rom device
ror19 said:
but ican't go to flash mode or fastboot mode How can I work Software or to Custom Rom device
Click to expand...
Click to collapse
Are you sure? You should try with Flashtool first
Would you like a link to a tutorial? I will post it for you if you want.
TechnoSparks said:
Are you sure? You should try with Flashtool first
Would you like a link to a tutorial? I will post it for you if you want.
Click to expand...
Click to collapse
Yes, I have tried all ways but it did not work
ror19 said:
Yes, I have tried all ways but it did not work
Click to expand...
Click to collapse
If so then I am sorry, I may not able to help you
ror19 said:
Yes, I have tried all ways but it did not work
Click to expand...
Click to collapse
You should still be able to go in flash mode. Make sure your phone is turned off by pressed the force OFF button in the back. Let me know if you don't know how to do that.
Then press and hold the volume down button while plugging the microusb port to your phone.
Notification bar is supposed to light green.
Let me know if this works.
@ror19 have you fixed your device , any solution
TIA
i went to twrp to flash a new rom, i formatted my galaxy note 5 and when i plug in my usb drive via otg it doesnt work. the port charges but there is no data, even on windows, i tried installing drivers and samsung kies, nothing is working, i asked around and no one has any replacements for the usb port for my note 5. is there anything i can do? galaxy note 5 doesnt have a sd card and i tried cleaning the port and its still the same, it charges but no data.
Same problem here. Did you fix it?
---------- Post added at 04:10 PM ---------- Previous post was at 04:09 PM ----------
I do have ROMs on my internal storage. But none of theme are booting idk why