i went to twrp to flash a new rom, i formatted my galaxy note 5 and when i plug in my usb drive via otg it doesnt work. the port charges but there is no data, even on windows, i tried installing drivers and samsung kies, nothing is working, i asked around and no one has any replacements for the usb port for my note 5. is there anything i can do? galaxy note 5 doesnt have a sd card and i tried cleaning the port and its still the same, it charges but no data.
Same problem here. Did you fix it?
---------- Post added at 04:10 PM ---------- Previous post was at 04:09 PM ----------
I do have ROMs on my internal storage. But none of theme are booting idk why
Related
Any reason behind it and a way I could fix it?
Sent from my SAMSUNG-SGH-I897 using XDA App
I'm not sure if this is just with Serendipity, but I had a problem where my computer wouldn't recognize one of my drives on my Captivate even when I put it in mass storage mode.
Try disconnecting and reconnecting again. It takes me 2 tries always for some reason for it to properly recognize my drive.
No, I retired it several times and it still didn't work.
Sent from my SAMSUNG-SGH-I897 using XDA App
Can you connect to kies?
---------- Post added at 10:58 PM ---------- Previous post was at 10:55 PM ----------
If you can connect to kies when it opens go to tool then install drivers and you should b good to go pl
So I am currently in the process of trying to flash a recovery drive onto my samsung galaxy mini however whenever i connect my phone in download mode my computer says windows can not recognise the device however it recognises my device when in all other modes. I have tried re installing drivers factory and resetting my phone several times. Please help if you know how! Thanks
P.s. I have attached a picture of the message i am given.
So maybe you don't install driver phone yet , right ?
---------- Post added at 04:06 PM ---------- Previous post was at 04:05 PM ----------
Or should maybe try restart your computer to give all drivers read properly into your system computer .
thanks but didn't help
Thanks for the advice but it didn't work, p.s. what do you mean about not installing drivers yet, they are required
Also the problem is that my computer detects the phone but can't read it essentially
Hi,
I've got a problem with my Honor 3c.
When I'm trying to connect it without battery to unbrick it in program Smart Phone Flash Tool it is only like on the screenshot. Phone vibrating every 5 seconds. I've got drivers. Maybe you know what to do?
Solution
Try with the battery inside. I had the same issue, inserting the battery solved the problem
1.Turn off phone and remive battery then disconnect all usb connections from phone
---------- Post added at 09:33 ---------- Previous post was at 09:33 ----------
2.Connect usb cable with phone without battery
---------- Post added at 09:34 ---------- Previous post was at 09:33 ----------
3. Press Download on sp flash tool then insert battery
Post outcone?
I passed this step, I am stuck with next step
Fixed it?
looks like problem with scatter file.
i used kingo root in PC to root the phone , then after when i reboot the phone, it was stuck with the logo fore ever..
then i unlocked the boot loader and then flashes it with kitkat stock firmware..
then downloaded the lollipop update in the phone , after installing it the phone didn't booted ..
i cant boot it manually, cant go to fast boot mode ..
it is just dead...
what can i do ..plz help.
not showing qhslk bulk when connected to pc but shows ----unknown usb device(device descriptor request failed)
Oh I think its hardbricked dude,because if bootloader is unlocked then we shouldn't do any official updates...
---------- Post added at 10:53 AM ---------- Previous post was at 10:51 AM ----------
Still u can try to charge it or connect it to pc and goto device manager in pc and see that if it showing qhslk bulk or not,...
Divesh ahuja said:
Oh I think its hardbricked dude,because if bootloader is unlocked then we shouldn't do any official updates...
---------- Post added at 10:53 AM ---------- Previous post was at 10:51 AM ----------
Still u can try to charge it or connect it to pc and goto device manager in pc and see that if it showing qhslk bulk or not,...
Click to expand...
Click to collapse
nope..... not showing ......
Then what is it showing in pc??
Divesh ahuja said:
Then what is it showing in pc??
Click to expand...
Click to collapse
it shows ..
unknown usb device(device descriptor request failed)
i tried the blank flash but during the blank flash error occurs ..
cant install the specified driver for the blank flash..
Then its hardbricked bro,replace motherboard or sell it its body parts who needs or in the market
Just a few general ideas - probably won't help but you never know:
Leave it charging for several hours and then see if you can access fastboot
Try a different PC (including one that you've never plugged your phone into before, one with a different Windows version, etc.) to see if you can get it to recognise the phone as qhslk bulk
Try plugging the device into your PC using a different USB cable to see if you can get it to recognise the phone as qhslk bulk
Have a look around the web on guides for restoring a hard-bricked Moto G 2014 (specific model, type, etc.). This probably won't work but anything is worth a try. You could try following these on different PCs, with different USB cables, etc.
I think this problem was caused by trying to downgrade your phone to KitKat
Hope you get it working
ello guys, I'm a proud owner of HTC one m7. Firstly Thank you guys for all the posts which helped me root my mobile and I use VIPER VENOM 9.0. Well long story short the other day I flashed AINUR BANG&OLUFSEN ( which I've found here ) but something caused it to stuck at ANDROID UPGRADING for 2 days so I wanted to re-flash the ROM and I wiped the ROM and it was too late that I've forgotten the point that I have deleted my backup ROM file. Now I'm stuck with no OS, TWRP won't recognize OTG, tried to transfer files via ADB sideload but my PC won't recognize my phone and when I connect it through Fastboot I don't get the FASTBOOT USB :'(. Now I don't know want to do guys I need your help here guy's please.
maniunique01 said:
ello guys, I'm a proud owner of HTC one m7. Firstly Thank you guys for all the posts which helped me root my mobile and I use VIPER VENOM 9.0. Well long story short the other day I flashed AINUR BANG&OLUFSEN ( which I've found here ) but something caused it to stuck at ANDROID UPGRADING for 2 days so I wanted to re-flash the ROM and I wiped the ROM and it was too late that I've forgotten the point that I have deleted my backup ROM file. Now I'm stuck with no OS, TWRP won't recognize OTG, tried to transfer files via ADB sideload but my PC won't recognize my phone and when I connect it through Fastboot I don't get the FASTBOOT USB :'(. Now I don't know want to do guys I need your help here guy's please.
Click to expand...
Click to collapse
Try to press volume down + power off buttons to enter fastboot mode.
You have to find a bright light, move your phone closer to the light, the light sensors should face the light, then press those buttons. I dont know why the light but it worked for me. I used a lamp as you can see in the aatachment.
maniunique01 said:
ello guys, I'm a proud owner of HTC one m7. Firstly Thank you guys for all the posts which helped me root my mobile and I use VIPER VENOM 9.0. Well long story short the other day I flashed AINUR BANG&OLUFSEN ( which I've found here ) but something caused it to stuck at ANDROID UPGRADING for 2 days so I wanted to re-flash the ROM and I wiped the ROM and it was too late that I've forgotten the point that I have deleted my backup ROM file. Now I'm stuck with no OS, TWRP won't recognize OTG, tried to transfer files via ADB sideload but my PC won't recognize my phone and when I connect it through Fastboot I don't get the FASTBOOT USB :'(. Now I don't know want to do guys I need your help here guy's please.
Click to expand...
Click to collapse
Looks like something is wrong with the usb. If you can't get "FASTBOOT USB" to show in bootloader when your phone is connected, that's because it's not detecting any data connection with the computer. Make sure your usb cable works fine with other device (not only for charging but also for data transfer) or try another usb cable. Try another usb port on your computer and make sure to use usb 2.0 ports. Also make sure you have he latest drivers installed. If it's still not working after all this, maybe the phone usb port is damaged.,,
---------- Post added at 12:22 PM ---------- Previous post was at 12:19 PM ----------
mose_nd said:
Try to press volume down + power off buttons to enter fastboot mode.
Click to expand...
Click to collapse
Hes phone already booted in bootloader/fastboot mode.
You have to find a bright light, move your phone closer to the light, the light sensors should face the light, then press those buttons.
Click to expand...
Click to collapse
This trick is used for phones that refuse to power on, not for the problems described above.
alray said:
Looks like something is wrong with the usb. If you can't get "FASTBOOT USB" to show in bootloader when your phone is connected, that's because it's not detecting any data connection with the computer. Make sure your usb cable works fine with other device (not only for charging but also for data transfer) or try another usb cable. Try another usb port on your computer and make sure to use usb 2.0 ports. Also make sure you have he latest drivers installed. If it's still not working after all this, maybe the phone usb port is damaged.,,
---------- Post added at 12:22 PM ---------- Previous post was at 12:19 PM ----------
Hes phone already booted in bootloader/fastboot mode.
This trick is used for phones that refuse to power on, not for the problems described above.
Click to expand...
Click to collapse
THAK YOU ALRAY AND MOSE, I'm too guessing that it could be the usb port, Because I tired everything which you guys have mentioned in the reply and received all negative results and I think I may have to replace my mobile usb port. Will let you know guys and again thank you so much.
alray said:
Looks like something is wrong with the usb. If you can't get "FASTBOOT USB" to show in bootloader when your phone is connected, that's because it's not detecting any data connection with the computer. Make sure your usb cable works fine with other device (not only for charging but also for data transfer) or try another usb cable. Try another usb port on your computer and make sure to use usb 2.0 ports. Also make sure you have he latest drivers installed. If it's still not working after all this, maybe the phone usb port is damaged.,,
---------- Post added at 12:22 PM ---------- Previous post was at 12:19 PM ----------
Hes phone already booted in bootloader/fastboot mode.
This trick is used for phones that refuse to power on, not for the problems described above.
Click to expand...
Click to collapse
Okay,
Hi guys, thanks for the comments, i did try the above-mentioned procedures and nothing came out in positive and i even replaced mobile usb port still no detection another htc m7 of mine gets detect and when i use the same port and usb mine doesnt get detected what can be done ?
Thanks in advance.