Database Develop

[Q] [help] phone bricked? any solution?

Let's see, I've rooted my phone a few days ago and set a partition to link2sd, everything was ok, i've tryed to use a swap partition as well that didn't work, but phone still ran well. Reading the tutorial discussion further i've noticed that it was rather old and swap partitions were unnecessary with Android 4 and up, I've turned off my phone in order to remove my sd card and format it again but prior to removing battery i've noticed that the screen flashed and a bunch of scrambled pixels appeared, since this happened every time i turn my phone on only a bunch of static square patterns are shown.
By pressing volume down+home+power i can acess a screen to download Other OS, it's the only thing that seems to work. i can't acess CWM recovery or anything.
Is the mini dead or there's a solution? Anything with Odin or the MIni Toolkit? Couldn't find anything helpful through search.

Flash stock via odin..
Sent from my GT-I8190 using Tapatalk 4

download stock rom or cm 10.2 odin package , and flash it via odin..
i flashed wrong modem some days ago and soft bricked my device, i used CM 10.2 odin package to recover..

I've tryed both maclaw's and the official stock for my i8190L but both give me the same 'No Pit Partition' error. I've been searcing all over XDA and the web and no one seems to have a solution for this or the pit file for the L model, only for the other models.. looks like i'm screwed.
The procedure on Odin is simply adding the firmware .md5 file to the PDA section, plug the phone in 'download mode' and hit start, right? I'm new to samsung flashing, sorry for the noobish question.

As long as you can boot to 'download mode' it isn't hardbricked. Have tou tried to flash again some recovery with odin? If Odin doesn't help you can always try using Kies to get device to completely stock state. All you have to do is boot device to download mode, connect via usb to PC and open Kies. There is option to "reset&update to latest firmware" or sth like that. That has saved many sammy devices in tricky situtations, even tho Kies as software sucks
Sent from my Nexus 7 using Tapatalk
---------- Post added at 12:02 AM ---------- Previous post was at 12:00 AM ----------
a.monteiro said:
I've tryed both maclaw's and the official stock for my i8190L but both give me the same 'No Pit Partition' error. I've been searcing all over XDA and the web and no one seems to have a solution for this or the pit file for the L model, only for the other models.. looks like i'm screwed.
The procedure on Odin is simply adding the firmware .md5 file to the PDA section, plug the phone in 'download mode' and hit start, right? I'm new to samsung flashing, sorry for the noobish question.
Click to expand...
Click to collapse
Just wanted to answer your question about flashing with Odin; that is correct way to do it.
Sent from my Nexus 7 using Tapatalk

Thanks for the answers, guys. Can't do new tests now but I'll try as soon as I get back from holidays. Any attempts to flash through Odin only gives me the same pit partition error, and kies also seemed equally unfruitful. Looks like my options are getting short.

[Q] Stuck at boot loop.

I have a SM-G925V I'm trying to recover. Currently it's only able to get to download mode (Power - Home - Volume Down) and maintenance mode (Power - Volume Up - Volume Down). When you power it on you see the first splash screen then reboots over and over. Unable to get to recovery mode at all (Power - Home - Volume Up).
In download mode, using this I can get Odin 3.10.6 to successfully flash the firmware from the same thread and when it reboots it boot loops again. Also, tried the firmware from this thread.
I also tried using Odin 3.07 and 3.09. Both of these versions get stuck at <ID:0/005> NAND Write Start!! with the box at the top saying "Set Partition". Both versions will however, let you re-partition using the .pit file located in the first thread linked.
In maintenance mode, all of the options instantly reboot the phone and start the boot loop again.
Samsung's Smart Switch says "Unsupported device".
The screen shows this in download mode:
Code:
ODIN MODE
PRODUCT NAME: SM-G925V
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
REACTIVATION LOCK: OFF
Secure Download: Enabled
AP SWREV: 1
Kernel AP SWREV: 1
Any help or suggestions would be appreciated, pretty much willing to try anything at this point. I should also mention I did everything above on 2 separate computers, both running Windows 7 Pro and 2 different cables, cause that's always the problem right?

cameljon said:
I have a SM-G925V I'm trying to recover. Currently it's only able to get to download mode (Power - Home - Volume Down) and maintenance mode (Power - Volume Up - Volume Down). When you power it on you see the first splash screen then reboots over and over. Unable to get to recovery mode at all (Power - Home - Volume Up).
In download mode, using this I can get Odin 3.10.6 to successfully flash the firmware from the same thread and when it reboots it boot loops again. Also, tried the firmware from this thread.
I also tried using Odin 3.07 and 3.09. Both of these versions get stuck at <ID:0/005> NAND Write Start!! with the box at the top saying "Set Partition". Both versions will however, let you re-partition using the .pit file located in the first thread linked.
In maintenance mode, all of the options instantly reboot the phone and start the boot loop again.
Samsung's Smart Switch says "Unsupported device".
The screen shows this in download mode:
Code:
ODIN MODE
PRODUCT NAME: SM-G925V
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
REACTIVATION LOCK: OFF
Secure Download: Enabled
AP SWREV: 1
Kernel AP SWREV: 1
Any help or suggestions would be appreciated, pretty much willing to try anything at this point. I should also mention I did everything above on 2 separate computers, both running Windows 7 Pro and 2 different cables, cause that's always the problem right?
Click to expand...
Click to collapse
What did you do/flash to cause the loop to begin with?
Sent from my SM-G925V

Demiurge7 said:
What did you do/flash to cause the loop to begin with?
Sent from my SM-G925V
Click to expand...
Click to collapse
Not 100% sure but I think they were trying to flash it back to stock using the same method I'm trying now.

cameljon said:
Not 100% sure but I think they were trying to flash it back to stock using the same method I'm trying now.
Click to expand...
Click to collapse
Have you tried flashing the OE2 in Odin?
Sent from my SM-G925V using XDA Free mobile app

Demiurge7 said:
Have you tried flashing the OE2 in Odin?
Sent from my SM-G925V using XDA Free mobile app
Click to expand...
Click to collapse
Downloaded OE2 from sammobile. Same result.
Side note: It doesn't have a .pit file. Do they normally come with one stock? I'd like to try another .pit file and see if I can get Smart Switch to recognize the phone again.

cameljon said:
Downloaded OE2 from sammobile. Same result.
Side note: It doesn't have a .pit file. Do they normally come with one stock? I'd like to try another .pit file and see if I can get Smart Switch to recognize the phone again.
Click to expand...
Click to collapse
Yes I thought the firmware package included the partition table, but I could be wrong. I can't seem to find any .pit file for our variant on its own.
I am still curious to know what caused it in the first place, as it sounds like everything you have tried should have worked. Other than flashing the wrong variant firmware in Odin, or a corrupt .tar, I wonder how that could have caused a bootloop. And even then, if you can get into download mode, the correct full Odin package (as you tried) should have fixed it. Tried other comps, check. Tried other cables, check. Did you make sure you were plugged into primary USB ports? Did you check the md5s of the Odin packages?
I'll let you know if I run into a standalone .pit file, otherwise I am sorry I couldn't be of more help. Keep us posted though.
Sent from my SM-G925V using XDA Free mobile app

Demiurge7 said:
Yes I thought the firmware package included the partition table, but I could be wrong. I can't seem to find any .pit file for our variant on its own.
I am still curious to know what caused it in the first place, as it sounds like everything you have tried should have worked. Other than flashing the wrong variant firmware in Odin, or a corrupt .tar, I wonder how that could have caused a bootloop. And even then, if you can get into download mode, the correct full Odin package (as you tried) should have fixed it. Tried other comps, check. Tried other cables, check. Did you make sure you were plugged into primary USB ports? Did you check the md5s of the Odin packages?
I'll let you know if I run into a standalone .pit file, otherwise I am sorry I couldn't be of more help. Keep us posted though.
Sent from my SM-G925V using XDA Free mobile app
Click to expand...
Click to collapse
At the start of this, I did run into a USB problem. I couldn't flash at all on my desktop from my USB 3.0 front header. Works on the 2.0 front header and all of the motherboard headers. So I ruled that out by accident at least. The MD5s check out. I'm going to keep searching for a pit file that goes with the OE2, or at least find out why it's not in the firmware from sammobile. Know another source for OE2?
Without another partition file or firmware I can flash from Odin, some social engineering with the Verizon store may be the next step.

cameljon said:
At the start of this, I did run into a USB problem. I couldn't flash at all on my desktop from my USB 3.0 front header. Works on the 2.0 front header and all of the motherboard headers. So I ruled that out by accident at least. The MD5s check out. I'm going to keep searching for a pit file that goes with the OE2, or at least find out why it's not in the firmware from sammobile. Know another source for OE2?
Without another partition file or firmware I can flash from Odin, some social engineering with the Verizon store may be the next step.
Click to expand...
Click to collapse
No, no oe2 yet. I am sure it will get posted though soon.
Sent from my SM-G925V

yea its the pit file that you need, should solve your issue..

Verizon Galaxy S6 Edge stuck on boot logo

Hello,
I have a Verizon S6 Edge, that I need help with. My phone was working fine and yesterday, all of a sudden it turned on, and is now stuck on the "Samsung Galaxy S6 Edge Powered by android" screen. It does not go past that. I can't even turn the phone off. I just have to wait for it to die. The phone has never been rooted and I've always just done OTA updates on it. I went to a local Best Buy to get it reflashed with the latest firmware but that still hasn't fixed it. I cannot access the recovery menu, only the download mode. I can also access maintenance mode which gives the option for Normal Boot, factory reset, safe mode, and USB Debugging. I have tried all those options but nothing different happens. I have downloaded the latest firmware from XDA and tried to flash it with ODIN and nothing happened there either. Any help is appreciated, I just don't want to throw my phone away. (I bought it last August)
Thanks!

I have the same problem, but i live in Mx and i can't find the stock rom anywhere. I hope someone can help us.

Hey, sorry to hear you're having issues.
Have you tried contacting Verizon or Samsung support yet?

Galaxy s6 verizon
good day,
after an OTA update my phone won't leave boot loop. although i can access download and recovery modes. I've tried resetting to factory defaults but it still won't pass the bootloader screen.
any help would be greatly appreciated thanks
---------- Post added at 10:44 AM ---------- Previous post was at 10:41 AM ----------
buttersocks said:
good day,
after an OTA update my phone won't leave boot loop. although i can access download and recovery modes. I've tried resetting to factory defaults but it still won't pass the bootloader screen.
any help would be greatly appreciated thanks
Click to expand...
Click to collapse
I've also tried flashing the official firmware via odin... It only says something like
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
Thanks again

spatadia14 said:
Hello,
I have a Verizon S6 Edge, that I need help with. My phone was working fine and yesterday, all of a sudden it turned on, and is now stuck on the "Samsung Galaxy S6 Edge Powered by android" screen. It does not go past that. I can't even turn the phone off. I just have to wait for it to die. The phone has never been rooted and I've always just done OTA updates on it. I went to a local Best Buy to get it reflashed with the latest firmware but that still hasn't fixed it. I cannot access the recovery menu, only the download mode. I can also access maintenance mode which gives the option for Normal Boot, factory reset, safe mode, and USB Debugging. I have tried all those options but nothing different happens. I have downloaded the latest firmware from XDA and tried to flash it with ODIN and nothing happened there either. Any help is appreciated, I just don't want to throw my phone away. (I bought it last August)
Thanks!
Click to expand...
Click to collapse
did you by chance use a pit file for odin as well as a full tar?
you could have messed up the partitions..
try to repartition it using odin or you can always try samsung smart switch emergency repair option etc.

elliwigy said:
did you by chance use a pit file for odin as well as a full tar?
you could have messed up the partitions..
try to repartition it using odin or you can always try samsung smart switch emergency repair option etc.
Click to expand...
Click to collapse
I didn't use any PIT files or anything. I just downloaded the stock OK7 firmware and put that in AP on odin, plugged my phone in under download mode and the update seems to go through fine but it still just boot loops. Doesn't go past the Galaxy S6 Edge screen. However, when I did that, there is now a padlock on my screen when it boots up and it also says custom under it and system status also says custom.

spatadia14 said:
I didn't use any PIT files or anything. I just downloaded the stock OK7 firmware and put that in AP on odin, plugged my phone in under download mode and the update seems to go through fine but it still just boot loops. Doesn't go past the Galaxy S6 Edge screen. However, when I did that, there is now a padlock on my screen when it boots up and it also says custom under it and system status also says custom.
Click to expand...
Click to collapse
something is not right then.. check the download md5 and what odin version you running?
custom padlock should go away after fresh install of a full odin tar which should be ~1.9gb zip before extracting it
Sent from my SM-G925V using XDA-Developers mobile app

elliwigy said:
something is not right then.. check the download md5 and what odin version you running?
custom padlock should go away after fresh install of a full odin tar which should be ~1.9gb zip before extracting it
Sent from my SM-G925V using XDA-Developers mobile app
Click to expand...
Click to collapse
I downloaded the stock one and installed it. Ithe was 1.86 GB. I put the md5 in the AP and that's it. Ithe downloads fine and installs fine on the phone but it just won't go past the boot screen and still has the custom padlock

Hard Bricked my Note 5 :)

Hi all,
I was running Custom ROM on my Galaxy Note 5. (Minosauras ROM v10)
Suddenly today morning the display was garbled with coffee stain pixels and while tried powering on I also had vertical glitch.
No recovery , no download mode
I tried connected to ODIN. I could do it.
Downloaded Stock firmware and flashed it.
Alas ! No chance of life.
a) can anyone give me PIT file for Indian version 32GB.
I tried using N920G UUB and ZTO pit file.
Now I have problems flashing system.img which clearly means I have been using the wrong pit file.
Can anyone support me out of this hard brick ?

prabhu1980 said:
Hi all,
I was running Custom ROM on my Galaxy Note 5. (Minosauras ROM v10)
Suddenly today morning the display was garbled with coffee stain pixels and while tried powering on I also had vertical glitch.
No recovery , no download mode
I tried connected to ODIN. I could do it.
Downloaded Stock firmware and flashed it.
Alas ! No chance of life.
a) can anyone give me PIT file for Indian version 32GB.
I tried using N920G UUB and ZTO pit file.
Now I have problems flashing system.img which clearly means I have been using the wrong pit file.
Can anyone support me out of this hard brick ?
Click to expand...
Click to collapse
Don't worry about flashing stock just re flash your twrp recovery and then go from there.

MrMike2182 said:
Don't worry about flashing stock just re flash your twrp recovery and then go from there.
Click to expand...
Click to collapse
No recovery ; No download mode.
Can connect to ODIN on a blank screen. Very hard brick !
With TWRP --> Black Screen with recovery enabled. No touch or whatsoever due to blank screen.
Need the pit file for Indian N920G Marshmallow ROM.

prabhu1980 said:
No recovery ; No download mode.
Can connect to ODIN on a blank screen. Very hard brick !
With TWRP --> Black Screen with recovery enabled. No touch or whatsoever due to blank screen.
Need the pit file for Indian N920G Marshmallow ROM.
Click to expand...
Click to collapse
What does 'No recovery; no download mode' even mean? Pit file doesn't fix the bricked phone but correct the pit(csc) mapping. Do you exactly know how to get into download mode though? If your display has been damaged, it still can get into download mode by the correct button combination.

Konsstantine34 said:
What does 'No recovery; no download mode' even mean? Pit file doesn't fix the bricked phone but correct the pit(csc) mapping. Do you exactly know how to get into download mode though? If your display has been damaged, it still can get into download mode by the correct button combination.
Click to expand...
Click to collapse
Hi , The problem is the display is garbled and the LED was showing various colors.
I tried recovery button combination to force into recovery. It didnt work.
I tried download mode (No download symbol)
But got a attachment to ODIN (COM 1: Blue)
I assumed that the bootloader is corrupt and loaded entire firmware through ODIN.
Everything was OK. But no display yet.
I tried starting using power button (Nothing on display)
Now I try PIT file.... System.img failed flashing.
Tried loading TWRP recovery; adb found 2 devices a) Device b) Recovery
Tried using Heimdall.
Now ODIN fails after using pit file once which failed.
Mine gets detected in ODIN and that is all the life it has.

prabhu1980 said:
Hi , The problem is the display is garbled and the LED was showing various colors.
I tried recovery button combination to force into recovery. It didnt work.
I tried download mode (No download symbol)
But got a attachment to ODIN (COM 1: Blue)
I assumed that the bootloader is corrupt and loaded entire firmware through ODIN.
Everything was OK. But no display yet.
I tried starting using power button (Nothing on display)
Now I try PIT file.... System.img failed flashing.
Tried loading TWRP recovery; adb found 2 devices a) Device b) Recovery
Tried using Heimdall.
Now ODIN fails after using pit file once which failed.
Mine gets detected in ODIN and that is all the life it has.
Click to expand...
Click to collapse
If you used an incorrect PIT file when you really didn't need to then you probably corrupted your entire partition table..

MrMike2182 said:
If you used an incorrect PIT file when you really didn't need to then you probably corrupted your entire partition table..
Click to expand...
Click to collapse
Yeah I understood that.
Now I need the correct pit file for my ROM to repartition it.
Should I repartition through dd tool only ?
Anyhow since my patience went away, I threw it down a service center.
Service center called me up and said display is back, but couldnt restore my note.
Calls for mother board change ! So I got it thrown back to me !!
It seems now my display is back , can anyone help me in getting my note repartitioned ?
R Prabhakar

Brick or not, after try Samfail method ?

After try v2 Samfail root method, my phone bootloop whit a message on Samsung screen at boot. I cant access to recovery mode, and sometimes appears a screen saying Upload mode need help. I have a Note 8 (Sprint) US

eloyho said:
After try v2 Samfail root method, my phone bootloop whit a message on Samsung screen at boot. I cant access to recovery mode, and sometimes appears a screen saying Upload mode need help. I have a Note 8 (Sprint) US
Click to expand...
Click to collapse
Sorry I don't have time to help you work through this. But you're not bricked. Do the process again. Try switching up your usb ports and cables. Try clicking the bootloader check and try loading the csc file when you flash everything. And hold the buttons longer than you think you should to return to download mode. Galaxy Note 8 screen is normal. You are likely already rooted and can get away with only redoing the second part.

bagery77 said:
Sorry I don't have time to help you work through this. But you're not bricked. Do the process again. Try switching up your usb ports and cables. Try clicking the bootloader check and try loading the csc file when you flash everything. And hold the buttons longer than you think you should to return to download mode. Galaxy Note 8 screen is normal. You are likely already rooted and can get away with only redoing the second part.
Click to expand...
Click to collapse
Thanks a lot. But i do the 2nd part, flash the 3 files and nothings happend. Do i have a chance to Flash stock image ?

eloyho said:
Thanks a lot. But i do the 2nd part, flash the 3 files and nothings happend. Do i have a chance to Flash stock image ?
Click to expand...
Click to collapse
You've tried all these things? You've restarted your phone? It seems you are really pretty close and could just power through. But I don't see any reason you can't return to stock. That may take you longer if you don't have the file and if you don't know how to get back.

bagery77 said:
You've tried all these things? You've restarted your phone? It seems you are really pretty close and could just power through. But I don't see any reason you can't return to stock. That may take you longer if you don't have the file and if you don't know how to get back.
Click to expand...
Click to collapse
Thats what i did.
1rst. Flash system tar. + Pit
I wait, until the process says FAILED.
After this failed message my phone just stuck on Download mode and dont restart by itself. I decide to use combo to power it off and turn it on again into download mode.
2nd.
I place the other 3 files in odin And flash it, following the steps from Samfail thread.
Reboot and get stuck on this screen now what can be ?

eloyho said:
Thats what i did.
1rst. Flash system tar. + Pit
I wait, until the process says FAILED.
After this failed message my phone just stuck on Download mode and dont restart by itself. I decide to use combo to power it off and turn it on again into download mode.
2nd.
I place the other 3 files in odin And flash it, following the steps from Samfail thread.
Reboot and get stuck on this screen now what can be ?
Click to expand...
Click to collapse
on part 1 it NEEDS to reboot to upload on its own. you had a failed flash. try again.
EDIT: also pic 1 is showing what happens with a failed part1 flash.

Any success?

RossTeagan said:
Any success?
Click to expand...
Click to collapse
Im having the same issue. after part 1 my phone stays in download mode. Ive tried to reflash it does nothing. Maybe this has been answered already and i am missing something? thx in advance

I had that happen to me to. I waited 5 or 10 min and it rebooted on its own. How long did you wait?

jjr3211 said:
I had that happen to me to. I waited 5 or 10 min and it rebooted on its own. How long did you wait?
Click to expand...
Click to collapse
My one phone in the past similar situation. This method worked for me^ Sometimes even had to wait longer.

jjr3211 said:
I had that happen to me to. I waited 5 or 10 min and it rebooted on its own. How long did you wait?
Click to expand...
Click to collapse
at least a half. Tried to flash again no luck, i tried to boot to dl mode and i have a screen with an error that says: "an error has occurred while updating the device software. use the emergency recovery function in the smart switch PC software"
damn :/

frsh20 said:
at least a half. Tried to flash again no luck, i tried to boot to dl mode and i have a screen with an error that says: "an error has occurred while updating the device software. use the emergency recovery function in the smart switch PC software"
damn :/
Click to expand...
Click to collapse
From there you should be able to flash part 2
---------- Post added at 03:09 AM ---------- Previous post was at 03:08 AM ----------
jjr3211 said:
From there you should be able to flash part 2
Click to expand...
Click to collapse
Do not unplug your phone between flashing part 1 and 2

Send that puppy to me I'll get you taken care of
Sent from my SM-N950U using Tapatalk

i have a secure check fail : system and a screen that reads: "an error has occurred while updating the device software. use the emergency recovery function in the smart switch PC software" If this reply keeps popping up its because i have sent it twice and it hasnt posted. am I f**ked?
---------- Post added at 03:57 AM ---------- Previous post was at 03:19 AM ----------
jjr3211 said:
From there you should be able to flash part 2
---------- Post added at 03:09 AM ---------- Previous post was at 03:08 AM ----------
Do not unplug your phone between flashing part 1 and 2
Click to expand...
Click to collapse
I Reflashed part 1 still stuck on that screen i mentioned. Part 2 flashed now my phone loops to the 5th image on pg 1.

frsh20 said:
i have a secure check fail : system and a screen that reads: "an error has occurred while updating the device software. use the emergency recovery function in the smart switch PC software" If this reply keeps popping up its because i have sent it twice and it hasnt posted. am I f**ked?
---------- Post added at 03:57 AM ---------- Previous post was at 03:19 AM ----------
I Reflashed part 1 still stuck on that screen i mentioned. Part 2 flashed now my phone loops to the 5th image on pg 1.
Click to expand...
Click to collapse
I would Odin back to stock and start over. When it happened to me I had to use regular Odin to flash it. And then I started over and got it to work.

jjr3211 said:
I would Odin back to stock and start over. When it happened to me I had to use regular Odin to flash it. And then I started over and got it to work.
Click to expand...
Click to collapse
Thanks for the info, ill give it a go and report back.

Still trying to flash rev2.5 maybe thats where i went wrong? Its too late now. I can only get into upload and download mode. Trying to flash stock but having fail issues in reg odin and comsy. Im actually so lost now that I dont even know what to flash. Bricked? Anyone have any ideas? Ive tried everything i have seen on this thread and others with no luck. My phone displays all of the same pictures as in page 1. Im have ATT if that helps.
Thanks and sorry if i misread something to get to where i am now. Ive been doing different root methods since i had a droid x. Never had this issue before when flashing with odin. Ive always worked my way out. Maybe i need a break.....
---------- Post added at 12:43 AM ---------- Previous post was at 12:41 AM ----------
also cannot get into recovery mode
---------- Post added at 01:42 AM ---------- Previous post was at 12:43 AM ----------
now, after trying to get back into download mode and the samsung logo popped up and was flashing from light to dark. after about 5 minutes it said "android is starting", a few minutes later it went to a charging screen. now i cant get anywhere... lol..
battery died

Charge the phone leave it in charger.
Get into download mode and flash your stock image with Prince comsy Odin with the data bootflag and the bootloader flag ticket, you can do this by adding a 1 in the .ini file. Flash the stock image and then reboot
Then if you want try to flash again the 2.5 version
If you are an unlocked carrier make sure to flash the csc file I posted in the samfail thread somewhere
I had the same problem you had until I flashed the unlocked csc file

DroidisLINUX said:
Charge the phone leave it in charger.
Get into download mode and flash your stock image with Prince comsy Odin with the data bootflag and the bootloader flag ticket, you can do this by adding a 1 in the .ini file. Flash the stock image and then reboot
Then if you want try to flash again the 2.5 version
If you are an unlocked carrier make sure to flash the csc file I posted in the samfail thread somewhere
I had the same problem you had until I flashed the unlocked csc file
Click to expand...
Click to collapse
Thanks for the info! Will give it a go.

Same here but WORSE
The same thing happened to me except mine doesn’t have that message on second screen that yours does it reboots and system mount failure and to top it all off IT ENABLED FRP LOCK SECRURE FOLDER ALL THAT how can I possibly. Bypass this so I can reflash the stock firmware I do root phones as a side hustle I’m pretty well known I’m my town for being the tech guy. This isn’t my phone but I DO have the email and password I just can’t disable the frp is there a way UCSB deactivate it on my google account perhaps?