Screen is scrolling in chaos (Awful bug) - LG G Watch R

So basically, half year after a purchase the image on the screen started to scroll in chaos - very buggy and impossible to use of course.
It began after I left the watched at home for couple of days (they still had juice when I picked them again). Painfully I managed to proceed with a factory reset and it worked... for 24 hours or so.
I decided to turn them off and went for a business trip leaving the watch at home. Much to my regret when I got back they still had the issue and moreover, now even the factory reset doesn't help.
I did not try to flash any ROM yet since my bud had bricked his watch during this process and I wish to avoid that at least for now.
I also would liek to notice that I did not spill a drip of water on the watch neither did drop it.
Had anyone saw anything like that? what it can be? software or hardware? Any advice would fit. Thanks in advance.
PS I cannot go to warranty service since I've bought them abroad.
PSS added: Forgot to mention - the screen behaves like that EVERYWHERE - watch faces in ambient or normal mode/ apps/ settings - everywhere.
The video is below:
https://www.youtube.com/watch?v=9K6sc4XbjP8&feature=youtu.be

anyone please?
Edit: So I flashed the the leedroid urban and the problem is still there, I assume it is a hardware issue :'(

Okay, Just FYI the problem was hardware - with the motherboard. I've changed it in LG service center for ~80 USD

Related

problem with touch screen, can't click on anything

i just recently bought my xda2s and it worked fine for a week though. now, from time to time my screen would be "untouchable". literally i cannot click anything or open anything even if i soft-reset it for 10x. buttons seem to work fine but the screen does not. it happened twice while my bluetooth was "on" and i thought maybe it was the bluetooth but recently the same thing happened with my bluetooth now turned "off". i have to wait for hours before it would return to normal again. Anybody help please? By the way, my bluetooth version is 1.0.0 build 3500.
I had a similar problem on my Samsung SPH-i700 PocketPC Phone through Verizon Wireless. Even after a hard reset, I couldn't get past the screen calibration, until I found out that a piece of hair and debris found on the outer edge of the screen right under the lip of the cover was interfering with the touch portion of the display. Apparently, the touch sensors extend past the visible area of the screen, so with both a little aircan and vacuum cleaning, the debris was picked up and the touch screen functioned normally again.
Is this a consistent and/or intermittent problem? Did a hard reset resolve anything?
look for the alignment
Do you have Calligragher 7.4 installed? I read about this in Tekguru website that if you re-install 7.3, the problem goes away. That is what I have done and it seems to be working for me so far (2 days test).
i've checked out my screen and i dont see any dirt or something... i even have a screen protector... dont know if that might cause the problem. Same thing happened last night but this time it was just for a short period of time then it went back to normal... I didn't try a hard reset cause i dont want to loose some of my files but if ever it happened again, i might try doing a hard reset and see what happens... right now, im having my xda2s checked if maybe it's a factory defect or something...
regarding the caligrapher program thing, i dont have that...
Hey, i have the exact same problem I bought mine here in Toronto, from an Asian dealer, its the O2 XDA IIs asia-pacific model.
Same problem, screen(touch screen) goes dead like no responses to any touches, for like half hour - 2hour once in a day or something and nothing cures it, hard soft rest nothing. just with time it suddenly starts working and the Handheld is useless until then...well i dont see any cure and this is the only place i have heard about someone else having this issue, i will take it back to the dealer, in hopes of exchanging.
any feedback will be will be appreciated
overclock it for a few days..that fixed mine..dont know how but it did.
There is a tread in blue angel about screen aliment that you might like to read. seems 4k of devices went out with screen problems.
What is overclock it. Fairly new to this. Mine just keeps trying to allign and thats all it does it doesnt go into boot mode just allign screen all the time

Problem! Please help! G1 goes to sleep and doesn't wake back up.

I don't know what caused this.
I got my G1 today. It worked for probably 2-3 hours perfectly fine.
I had an app freeze (either Barcode Scanner or Lock 2.0) and had to do a full hard reset.
Now, whenever the phones screen darkens or I put it to sleep manually, it WILL NOT come back up.
I have factory reset three times now to try and get this to work.
When the screen is black, all buttons on the phone still light up and so does the LED indicator up top. I had my phone set to use a locking pattern screen at one point during one reset to test out and when the screen went black, I was still able to try and log in by doing my pattern. It unlocked, but still showed nothing on the screen.
Please help!
I've tried:
Turning Wi-Fi off
Turning 3g Off
Disclaimer: Yes, I've searched. I can find other users with the same problem but none of them seem to have a solution.
Phone is NOT ROOTED and has the factory ROM.
Update 1: Update: It only freezes/blacks out when I try to wake the phone from one of the front key buttons.
If I'm sliding to unlock, it seems to be fine.... (but if I've already tried to open from the front it doesnt)
Update 2: If I mash all the buttons in random orders for about a minute or two it seems to come back. Anyone have any idea?
Update 3: I'm thinking this has to be an issue with none of the buttons waking the phone up when closed. If I lock the phone with the "END" key, and then click the front "END" Key again, nothing happens. If I slide the phone open, and click it twice - the phone wakes up.
Update 4: Confirmed update 3. Phone will not unlock via front keys unless it's slid open (or open enough to trigger).
I would really, really appreciate help with this.
Hate to bump this, but I've added some detail on the top and bottom. Have to leave for work, hopefully someone might have an idea by the time I get back.
Well you can try to reload the factory rom or root it and try a custom rom and see if the problem still exist. If it is still happening then it would be a hardware problem and need to be sent in. And yes you will still be covered under warranty with HTC since the phone is still less than a year old.
I had a problem with exactly the same symptoms. It turned out that the SD card was cocked-up so home, core, and some other process would hang trying to read it and the phone would not wake-up the screen any more.
Did you try removing the SD card and seeing if that helps?
Karolis said:
I had a problem with exactly the same symptoms. It turned out that the SD card was cocked-up so home, core, and some other process would hang trying to read it and the phone would not wake-up the screen any more.
Did you try removing the SD card and seeing if that helps?
Click to expand...
Click to collapse
Removed the SD card and rebooted the phone.
No change ( still acts the same way ).
Did you factory reset after or was it an instant change?
I don't mind losing data to fix this.
supremeteam256 said:
Well you can try to reload the factory rom or root it and try a custom rom and see if the problem still exist. If it is still happening then it would be a hardware problem and need to be sent in. And yes you will still be covered under warranty with HTC since the phone is still less than a year old.
Click to expand...
Click to collapse
Wouldn't I have to root to reload the factory rom? Is there a rooting tutorial based just on that?
zeabrid said:
Wouldn't I have to root to reload the factory rom? Is there a rooting tutorial based just on that?
Click to expand...
Click to collapse
If you use the official update you don't have to have root. There are some links on here. I'll see if I can find it for you.
https://android.clients.google.com/updates/signed-gfh-CRB43-from-CRB21.c88b03d2.zip
That should be it, but can't confirm since I'm on my work computer.
Some thoughts--may be useful, or not:
Mine was doing that too, but it was caused because I dunked mine underwater during an urban exploring mission. I dried it out, replaced the LCD screen, and everything worked until it would go to sleep. Then I had to do a variety of button mashes and opening the keyboard to get it to come back to life. Sometimes it just wouldn't come back. The problem grew worse over time.
If wiping and reflashing (no need to use a stock ROM) gets you nowhere, then I would suspect a deeper hardware issue. I see you bought it used, can you contact the seller?
If you want to check for water damage, take out the battery and look at the tiny circular sticker in the battery chamber--if it is not white, it has been water damaged. (And the warranty will not be honored.)
Other Lesson: No urban exploring with G1s.
The link didn't work, btw.
derfolo said:
Some thoughts--may be useful, or not:
Mine was doing that too, but it was caused because I dunked mine underwater during an urban exploring mission. I dried it out, replaced the LCD screen, and everything worked until it would go to sleep. Then I had to do a variety of button mashes and opening the keyboard to get it to come back to life. Sometimes it just wouldn't come back. The problem grew worse over time.
If wiping and reflashing (no need to use a stock ROM) gets you nowhere, then I would suspect a deeper hardware issue. I see you bought it used, can you contact the seller?
If you want to check for water damage, take out the battery and look at the tiny circular sticker in the battery chamber--if it is not white, it has been water damaged. (And the warranty will not be honored.)
Other Lesson: No urban exploring with G1s.
Click to expand...
Click to collapse
Zero water damage.
That's great news zeabrid! In that case, I agree with an earlier poster--you should be covered by warranty. Wipe and flash a good rooted rom, and if that doesn't work, revert to stock and demand a new phone.
derfolo said:
That's great news zeabrid! In that case, I agree with an earlier poster--you should be covered by warranty. Wipe and flash a good rooted rom, and if that doesn't work, revert to stock and demand a new phone.
Click to expand...
Click to collapse
Do you have a link to a guide that teaches how to do this (with the stock rom)? I can only see a few that're spread out.
I'm not entirely sure my phone can boot into safe mode/disk mode, so we'll see about that.
Another update: When I boot into safe mode, the same problem exists.
Edit: Just emailed HTC.
This can officially no longer be considered a software issue.
I just rooted and installed a standard ROM. Same issue.
It happens all the way at boot now, just realized this.
HTC emailed me back and told me to call them directly. Will do that tomorrow.
if I find a solution I'll post it immediately.
Alright, my phone is officially ****ed.
Restored back to the original rom.
New problem now: When I close the screen, the backlight goes out and doesn't come back on. (I can still barely see everything, but there's no light).
Calling HTC today.
Edit: Called T-Mo support. They suggested deleting programs to free up space (I only have 2 downloaded and to reset (already done)
=(
Edit2: Called and placed a RMA with HTC after talking to two of their customer support reps. Thankfully, they forwarded me up the support tier after only about a minute with each person when they realized I had already tried all other steps.
The RMA process was surprisingly easy. I have everything set up, and when I get paid (tomorrow) I'm going to ship the phone out. I was given an estimation of 7-10 business days for full repair and return shipping (which sounds great in my opinion - I've never sent anything in for warranty work before).
I'll update you guys once I hear from their repair team on whether or not I'm going to be covered under warranty (I told them that the phone was a gift to me), and if not what the cost is going to be. Like I said earlier in the thread, all water damage indicators are clear and I have unrooted my phone, so I should be covered hopefully.
Thanks to anyone who posted in this thread.
zeabrid said:
Alright, my phone is officially ****ed.
Restored back to the original rom.
New problem now: When I close the screen, the backlight goes out and doesn't come back on. (I can still barely see everything, but there's no light).
Calling HTC today.
Edit: Called T-Mo support. They suggested deleting programs to free up space (I only have 2 downloaded and to reset (already done)
=(
Edit2: Called and placed a RMA with HTC after talking to two of their customer support reps. Thankfully, they forwarded me up the support tier after only about a minute with each person when they realized I had already tried all other steps.
The RMA process was surprisingly easy. I have everything set up, and when I get paid (tomorrow) I'm going to ship the phone out. I was given an estimation of 7-10 business days for full repair and return shipping (which sounds great in my opinion - I've never sent anything in for warranty work before).
I'll update you guys once I hear from their repair team on whether or not I'm going to be covered under warranty (I told them that the phone was a gift to me), and if not what the cost is going to be. Like I said earlier in the thread, all water damage indicators are clear and I have unrooted my phone, so I should be covered hopefully.
Thanks to anyone who posted in this thread.
Click to expand...
Click to collapse
Yea it defitenly sounds like a hardware issue and needs to be fixed. Glad your getting it fixed and you'll be covered no problem.
Do you know if they charge return shipping if it's covered under warranty? I have to pay my own shipping there, and they had me put a credit card down on file in case I either bail when its already there or they need to charge for repair.
zeabrid said:
Do you know if they charge return shipping if it's covered under warranty? I have to pay my own shipping there, and they had me put a credit card down on file in case I either bail when its already there or they need to charge for repair.
Click to expand...
Click to collapse
To be honest I don't know the answer but would like to say they would pay for it. But they would have to let you know of the charge before they apply a charge to a credit card.
wow its weird cause im just having a similiar issue now.. in landscape mode.. phone and back light work perfectly. but one i close the screen everything goes virtually blank, everything is running perfectly just the screen light wont turn on..
will try some of your previous methods.. hopefully it works on mine..=/
thanks, for the info zeabrid

Auto Rotate not working

Hey guys I have a problem, today my nexus 6 slipped from my pants and felt screen down to the floor.. It has now a few scratches on one corner but nothing more physically speaking.. But now I have noticed that the auto rotate option is not working anymore.. Camera, photos, videos, web pages, etc nothing works.. Just YouTube but because it has its own option to see on landscape.. I have re started the phone 3 times and nothing.. I don't know if someone can help me this, if I have to install the firmware or make a factory reset or something.. I don't know.. My model is XT1103 bought from Motorola Mexico directly from their web page and I use it with Telcel.. I haven't had this issue before.. All started today and I'm guessing is because of the fall of the phone.
If this all happened after you dropped your phone I would assume its more of a mechanical issue (busted accelerometer) vs a software issue. I would doubt that any sort of reset or software tweak could fix a problem like that. It may benecessary to contact Motorola and set up a repair order.
rubennd said:
Hey guys I have a problem, today my nexus 6 slipped from my pants and felt screen down to the floor.. It has now a few scratches on one corner but nothing more physically speaking.. But now I have noticed that the auto rotate option is not working anymore.. Camera, photos, videos, web pages, etc nothing works.. Just YouTube but because it has its own option to see on landscape.. I have re started the phone 3 times and nothing.. I don't know if someone can help me this, if I have to install the firmware or make a factory reset or something.. I don't know.. My model is XT1103 bought from Motorola Mexico directly from their web page and I use it with Telcel.. I haven't had this issue before.. All started today and I'm guessing is because of the fall of the phone.
Click to expand...
Click to collapse
The same thing happened to me when my son dropped it on the floor. After looking around the web, I have found that it is a common issue with the owners of this device where it seems that the accelerometer gets shaken a bit out of place. You can download an application from the Play Store called Accelerometer Monitor which will show you the X, Y and Z value changes as you move the phone around. In my case, all the values where changing except for the Y value.
I know that this is not a scientific way of doing things, but what almost everybody recommended is smashing the back of the device hard on your hand many times in order to push the accelermoter back to its place. I have done this while I had the above application opened and after many trials the Y value started changing again and everything seemed to be back in place and working perfectly.
Good luck!
Ok so I downloaded the application you said, and in fact the Y value is the only one that doesn't change when moving the phone.. I guess I'll try the same of smashing the back oh the phone hard with the hand to see if that helps me.. Its driving me crazy that I cannot rotate the screen to landscape..
Good luck then! I know the feeling!
fixed
I know it's an old post but it just helped me fix the accelerometer. It got stuck on Y axis when I dropped the phone today on a carpet.
I installed the recommended app to monitor the settings and bumped the phone several times at the palm of my hand and magically the Y axis started responding.
Thank you for this post.
Wow this actually worked.
Thanks !! I would really hate to call Google and wait days for a refurbished replacement.
Just to let you know - this worked for me as well.
Thanks!
I just wanted to say that this fixed mine too
old post, but just to add a testimony,
no need to drop the phone and risk it.
just smack the phone on your hand, a bit of force is needed but nothing crazy.
i actually did this to the rhythm of a song haha
this works
amazing ... worked exactly as reported...
It worked for me...
oneshotaz said:
The same thing happened to me when my son dropped it on the floor. After looking around the web, I have found that it is a common issue with the owners of this device where it seems that the accelerometer gets shaken a bit out of place. You can download an application from the Play Store called Accelerometer Monitor which will show you the X, Y and Z value changes as you move the phone around. In my case, all the values where changing except for the Y value.
I know that this is not a scientific way of doing things, but what almost everybody recommended is smashing the back of the device hard on your hand many times in order to push the accelermoter back to its place. I have done this while I had the above application opened and after many trials the Y value started changing again and everything seemed to be back in place and working perfectly.
Good luck!
Click to expand...
Click to collapse
Above non-scientific solution worked for me for my Nexus 6 which had got Auto-rotate issue after it was dropped on screen side down.

[Q] Q scrolling display problem

Hello all
My watch has developed a strange display scrolling problem when active watchface is displayed since lollipop update.
Please see the following video to explain the problem.
Have tried to reset via the menu to fix the problem . after reset it works for a few minutes but then it comes back. I feel this is a software fault
Any ideas chaps?
Thanks
PebbleBed said:
Hello all
My watch has developed a strange display scrolling problem when active watchface is displayed since lollipop update.
Please see the following video to explain the problem.
Have tried to reset via the menu to fix the problem . after reset it works for a few minutes but then it comes back. I feel this is a software fault
Any ideas chaps?
Thanks
Click to expand...
Click to collapse
bro..im having the same issue..have u manage to rectify it?
I was advised by LG support to return it to the distributor
they initially told me to go back to lg but in the end they gave me a RMA
Now waiting for a repair or replacement watch. Fingers crossed
I had the same symptoms as well. When through LG's customer service to get an "RA" number. I was pleasantly surprised that LG provided pre-paid shipping through FEDEX. I received it back in a little over a week. It appears to be a new watch altogether, as the the front display didn't have the screen protector I put on it, as well as the band looking pristine. So it appears that this wasn't a software issue, but a hardware failure. It was surprising that it didn't have the latest firmware installed, but I'm still happy I have a functional LG Watch R back again! Make sure you keep the invoice/receipt to provide proof of purchase for free warranty service.
I have the same problem in my particular case happen after flashing the Urban ROM ... also think is a sofware problem ... any suggestion, i dont live in the USA and sending the watch to warranty will take months....
How to fix it?
Sorry for popping this thread. I have the same issue. My watch is 10 moth old. I tried to contact LG USA support, but for some reason they don't take responsibility for it. I definitely got my lesson regarding LG support
Did anybody managed to fix this problem? As for now I have $$$ brick
My watch has now developed this problem too but i am on marshmallow.
Would flashing 6.0.1 on the watch fix it does anyone think?
I cannot bring it back to LG as i bought it second hand
Any ideas to fix would be greatly received
I have the same problem, Did anybody managed to fix this problem?
I had the same issue. To solve the problem you need to remove the mainboard from your watch and do a reflow procedure with the mainboard.
A simple way to do it is to put the mainboard in a oven and heat it op to about 100 degrees celsius for about 5 minutes. Remove it from the oven and let it cool down.
Assemble your watch and power up.
problem solved
rijkerhc said:
I had the same issue. To solve the problem you need to remove the mainboard from your watch and do a reflow procedure with the mainboard.
A simple way to do it is to put the mainboard in a oven and heat it op to about 100 degrees celsius for about 5 minutes. Remove it from the oven and let it cool down.
Assemble your watch and power up.
Click to expand...
Click to collapse
You are the best, my friend, precisely the problem solved in this way.Thank you very much. :good:

HELP! Mobile is keep turning off and then not turning on.

Hi,
First of all, Sorry for Bad English, Bear with me.
Long Story, Short!
It keeps happening!
It would turn off, won't reboot
Won't take charging
I will leave it for a while
If I leave it off after when I am tired trying to turn it on, a few hours later It will be WARM like it was being used, Then I would plugin again and THIS TIME IT WOULD TAKE CHARGE and EVEN REBOOT!!
After when I am using it for a while (10-12min) GOES BACK TO POINT 1
I ERASE EVERYTHING, FACTORY RESET IT, and This time.. IT would work for more than 10-12min,
I will install apps, login into the account, and then again... The same thing would start to happen! !
What Really Happen? Day ZERO!
I bought this Red Magic 3 phone 3 months ago and it was working super awesome and everything was great until last week after a 30-40 min gaming session on this phone, I went back to sleep and kept the phone on the table.
The next morning I noticed that the mobile is turned off, I thought Maybe battery drained so I plugged in to charge and continued with my morning routine.
After an hour I noticed that mobile is still not charging I tried plugging in and out multiple times and it didn't start charging, I checked the Data Cable on my MI MAX 2 (that also supports Type C) and Cable and Adapter were working fine.
I immediately realized that SOMETHING IS WRONG!!!
I saw some youtube video and I tried that Vol Key + Power Key thing and that Bios look alike menu opened up, I can see all the reboot, recovery boot, etc option but nothing worked.
So I picked the WIPE DATA option and It worked, Formatted the Phone and IT REBOOTED.
I figured maybe some software issue was causing it.
BUT SINCE THAT DAY it keeps happening!
It would turn off, won't reboot
Won't take charge when I plugin
I will leave it for a while
a few hours later It will be WARM like it was being used, Then I would plug in again and THIS TIME IT WOULD TAKE CHARGE and EVEN REBOOT!!
After when I am using it for a while (10-12min) GOES BACK TO POINT 1
Service Center
They are no help! They don't know what is wrong with it, Even they formatted it in front of me they did the Factory RESET it, I tried using it in Front of them for a while and the SAME THING HAPPENED!
then they installed some updates using some official package.
But still,
IT would work for more than 10-12min,
I will install apps, login in the account
suddenly... The same thing would start happening again!
Their Resolution is :
Motherboard issue and I will have to get the motherboard replaced.
This simply means EVEN THEY DON'T KNOW WHAT IS WRONG WITH IT and CHANGING EVERYTHING is their SOLUTION!
and they said it won't be covered on the warranty! Because the warranty has been voided BECAUSE THERE IS A SMALL CHIP on the phone! -_- which happens to be 40-50 days old.
I know is their Excuse to get money from me! Now I don't know what to do with it.
For me it was my first expensive mobile. I never bought a mobile for more than 200$.
Same thing for me.
Germany, Europe.
Download Ampere.
What's your battery health at, voltage, and how many ma draw when just sitting in that app.
I've learned my lesson with this company. A couple of extra capacitative buttons and a large battery are not a reason to buy a phone. The build quality is ok, the software abysmal (I still get random **** getting pressed when I unlock the phone), and support horrendous. Do yourself a favor, threaten to speak with the governing authority in your country regarding warranties. Tell them a small crack on the screen is not indicative of internal damage. Tell them you will post a youtube review of the company and phone if they do not abide by their warranty and fix your phone.
Once you fix your phone, sell it and cut your losses.
When will people learn YouTube won't do anything. You need subscribers to have any kind of weight. I'm at 2.4m lol.
I don't know the warranty laws in your country. I know here they have to prove that what you did was the cause. Nubia is really shady and not only scams but will flat out lie all the time. I seen people had bad battery's and they say they need a replacement board.
Just let me know what I asked and we can start going in a little deeper. Start off with the basics then move into some other stuff. Could be a simple easy fix.
Some off topic posts are removed. Please remember our rules and post constructive content. Thank you.
Any update?
I'm curious to see if this is a battery issue or something else
Mineapple said:
Same thing for me.
Germany, Europe.
Click to expand...
Click to collapse
So What did You do....!
Ok I attempted to help you trouble shoot this issue and get it fixed but it's pretty clear this is an uphill battle and a waste of my time.
bignazpwns said:
Ok I attempted to help you troubleshoot this issue and get it fixed but it's pretty clear this is an uphill battle and a waste of my time.
Click to expand...
Click to collapse
Thanks for your time.
I got the Battery Replaced thinking it was the issue but right after the installation. I turned it on to use it and it didn't work... I am still facing the same issue.. Meaning Battery was fine.. there is something else that causing it to turn off like this..!
Still, it acts like in COMA, then it heats up, I will charge it, It will boot.. If I will try using it ..it will turn off and won't turn back on!
bignazpwns said:
Any update?
I'm curious to see if this is a battery issue or something else
Click to expand...
Click to collapse
Well.. I got the battery replaced and it was a waste of another 2,000INR. Still Facing the same issue. This means this Turning Off issue is not caused by the Battery.. It is due to something else..! :crying:

Categories

Resources