Database Develop

Can't flash xperia x8

Hi!
When i try to flash the mobile, using flash tool, i connect it pressing back bottom (flash mode), the green light turns on and a few secons later it turns off and appear the charging screen and nothing happens... sometimes it worked, yesterday worked one time with a back up of the original rom, but i need a free rom to use another sim card.
I rooted it some time ago, but i installed some rooms to test them and i don't know if i need to root again (if its rooted yet). I tried to root with supereasyclick, but i got no lucky with 2 versions of the app. With the last version of flash tool the root bottom is grey and i don't know how to do it, also i don't know if i need to unlock the bootloader again...
So i'm trying to flash the mobile with nAa kernel and it seems imposible to me...
Please help me!

ChazyTheBest said:
Hi!
When i try to flash the mobile, using flash tool, i connect it pressing back bottom (flash mode), the green light turns on and a few secons later it turns off and appear the charging screen and nothing happens... sometimes it worked, yesterday worked one time with a back up of the original rom, but i need a free rom to use another sim card.
I rooted it some time ago, but i installed some rooms to test them and i don't know if i need to root again (if its rooted yet). I tried to root with supereasyclick, but i got no lucky with 2 versions of the app. With the last version of flash tool the root bottom is grey and i don't know how to do it, also i don't know if i need to unlock the bootloader again...
So i'm trying to flash the mobile with nAa kernel and it seems imposible to me...
Please help me!
Click to expand...
Click to collapse
Did you unlock your bootloader? If not, check your manufacture date from the battery. It says "10wXX" or "11wXX" or "12wXX". When your device is past 11w29 and above like 11w29,11w30,...... you can't unlock your bootloader. What happens when you can't? You can NEVER FLASH OTHER KERNELS except your STOCK KERNEL to your device! And also the STOCK FIRMWARE you can only FLASH! So that's why it can't properly enter into the flash mode.
Some tips for you: Start flashtool first if you're trying to flash back to original firmware. And choose the files and ok and wait for it for preparing files and when it says to start to flash mode and connect! Then you press your back button to your device FIRST and connect USB and when it turns green LED, you can let it go I meant the BACK button! Hope it helped!
Click "Thanks" If I helped you out!
---------- Post added at 05:22 PM ---------- Previous post was at 05:18 PM ----------
You can root with SuperOneClick ShortFuse! Connect your device in USB debugging!
Settings > Applications > Development > Tick "USB Debugging"
And connect your device to your computer and click "Root" button on SuperOneClick and wait for it! And then, Viola! Your device is now rooted!
You have to reboot your device for first time to make root access work! Then install Root Explorer and Superuser will prompt for root access!
That way you can tell it is successfully rooted!
P.S: This guide for you is only for 2.1 Stock Firmware

ChazyTheBest said:
Hi!
When i try to flash the mobile, using flash tool, i connect it pressing back bottom (flash mode), the green light turns on and a few secons later it turns off and appear the charging screen and nothing happens... sometimes it worked, yesterday worked one time with a back up of the original rom, but i need a free rom to use another sim card.
I rooted it some time ago, but i installed some rooms to test them and i don't know if i need to root again (if its rooted yet). I tried to root with supereasyclick, but i got no lucky with 2 versions of the app. With the last version of flash tool the root bottom is grey and i don't know how to do it, also i don't know if i need to unlock the bootloader again...
So i'm trying to flash the mobile with nAa kernel and it seems imposible to me...
Please help me!
Click to expand...
Click to collapse
if u wanna to check your phone was rooted or not
Just plug in mobile to PC and click Flashtool.exe
u can see there if your phone was rooted or not by see the log
like this
Code:
05/008/2013 20:08:35 - INFO - <- This level is successfully initialized
05/008/2013 20:08:36 - INFO - Flashtool Version 0.9.10.1 built on 2013-01-09 19:49:47
05/008/2013 20:08:36 - INFO - You can drag and drop ftf files here to start flashing them
05/008/2013 20:08:42 - INFO - Device connected with USB debugging on
05/008/2013 20:08:43 - INFO - Connected device : E15
05/008/2013 20:08:43 - INFO - Installed version of busybox : BusyBox v1.20.1-cm7 static (2012-05-28 03:57 +0200) multi-call binary.
05/008/2013 20:08:43 - INFO - Android version : 2.3.7 / kernel version : 2.6.29.6-nAa-14 / Build number : 3.0.1.A.0.145
05/008/2013 20:08:43 - INFO - Installing toolbox to device...
05/008/2013 20:08:43 - INFO - Pushing C:\Flashtool\custom\root\ftkit.tar to /data/local/tmp
05/008/2013 20:08:44 - INFO - Running installftkit as root thru sysrun
05/008/2013 20:08:44 - INFO -[B] Root Access Allowed[/B]
if NOT and u want to root your phone
just click on Padlock icon
dont forget to check the USB debugging and allow non-market application on setting
Cheers!

Thanks for answering.
I forget to say onething: i flashed it one time, so i don't remember what manufacture date have my phone, but it must work because i did it one time.
When i start flash tool and connect the phone, it doesn't detect it. Just when i start it (and without usb connected) it says:
05/014/2013 17:14:12 - INFO - <- This level is successfully initialized
05/014/2013 17:14:12 - INFO - Flashtool Version 0.9.10.2beta6 built on 2013-04-21 22:23:00
05/014/2013 17:14:18 - INFO - Device connected with USB debugging on
05/014/2013 17:14:18 - ERROR - Cannot identify your device.
05/014/2013 17:14:18 - INFO - Selecting from user input
Click to expand...
Click to collapse
without the phone connected...
Ok, the manufacture date is 10W45, so should work perfectly. What tool can i use to unlock the bootloader? The objective is unlock the sim restriction, so if there is a easiest way, just tell me please.
When i flashed yesterday the backup i exclude TA (simlock.ta) to see if without that, the sim locker is removed, but nothing...
The flash tool version im using is "0.9.10.2beta6 built on 2013-04-21 22:23:00" (java version 1.7.0_17 64bits Edition)
I installed pc companion, and drivers were installed too. Also drivers from flash tool folder (x8, flashmode and fastboot)
Really... i don't know why flash tool doesn't recognize the phone when i plugged in, i don't know what it recognize when i start it... here the full log (debug). Also, the backup i flashed (downloaded from internet) is e15a and my phone is e15i, does it matter?
Please, give me working tools to unlock bootloader or something else (links)
Thanks!

ChazyTheBest said:
Thanks for answering.
I forget to say onething: i flashed it one time, so i don't remember what manufacture date have my phone, but it must work because i did it one time.
When i start flash tool and connect the phone, it doesn't detect it. Just when i start it (and without usb connected) it says:
without the phone connected...
Ok, the manufacture date is 10W45, so should work perfectly. What tool can i use to unlock the bootloader? The objective is unlock the sim restriction, so if there is a easiest way, just tell me please.
When i flashed yesterday the backup i exclude TA (simlock.ta) to see if without that, the sim locker is removed, but nothing...
The flash tool version im using is "0.9.10.2beta6 built on 2013-04-21 22:23:00" (java version 1.7.0_17 64bits Edition)
I installed pc companion, and drivers were installed too. Also drivers from flash tool folder (x8, flashmode and fastboot)
Really... i don't know why flash tool doesn't recognize the phone when i plugged in, i don't know what it recognize when i start it... here the full log (debug). Also, the backup i flashed (downloaded from internet) is e15a and my phone is e15i, does it matter?
Thanks!
Click to expand...
Click to collapse
okay
make sure all driver was installed successfully
X8 driver
gordon gates
driver from C:\Flashtool\Driver
How to unlock??
1. Use s1 tool (search or read this!)
or
2. Use Flashtool

BlackRabbit1703 said:
okay
make sure all driver was installed successfully
X8 driver
gordon gates
driver from C:\Flashtool\Driver
How to unlock??
1. Use s1 tool (search or read this!)
or
2. Use Flashtool
Click to expand...
Click to collapse
I have s1tool, there are only 3 options: identify, flash and restore... what i have to do?
identify:
Welcome to S1 tool.
TO CONNECT NEXT PHONES
X10 Xperia,E10 Xperia Mini,E15 Xperia X8,U20 Xperia Mini Pro
LT15 Xperia ARC,MT15 Xperia NEO,R800 Xperia PLAY
PRESS AND HOLD "BACK" BUTTON...
PLEASE ATTACH TURNED OFF PHONE NOW
RUNNING S1_EROM VER "r8A029"
SOFTWARE AID: 0001
LOADER AID: 0001
FLASH ID: "0020/00BC"
LOADER VERSION: "r4A060"
MODEL (from GDFS): E15a
SOFTWARE VERSION: 1236-9291_2.0.1.A.0.47
CUSTOM VERSION: 1243-9502_R3B
FILESYSTEM VERSION: WORLD-1-2-5_2.0.1.A.0.47
SERIAL NO: CB511R82AK
SEMC SIMLOCK CERTIFICATE
Elapsed:14 secs.
Click to expand...
Click to collapse
When i use SuperOneClick to root the phone it give me a c# error (Exception error) "error: more than on device and emulator"... what the hell mean that? i only have 1 phone conected...
Thanks!

ChazyTheBest said:
I have s1tool, there are only 3 options: identify, flash and restore... what i have to do?
identify:
When i use SuperOneClick to root the phone it give me a c# error (Exception error) "error: more than on device and emulator"... what the hell mean that? i only have 1 phone conected...
Thanks!
Click to expand...
Click to collapse
with s1 tool click identify to unlock
hey...I think u had unlock your phone
by read your log
r -> unlock
R -> Lock

To all above:
You cannot sim unlock a phone with any tools here on XDA. It pays to read the op thoroughly before answering with help.

xperia tx bricked

guys some one please help me . i installed http://forum.xda-developers.com/showthread.php?p=44860224 in xperia tx and now i think its bricked. it shows only sony logo. afterthat its switching off again. please help me. is there a way to force flash rom?

First try to repair using PC Companion, if that doesn't work try to flash a stock ROM using Flashtool.
Sent from my LT30p using xda app-developers app

romeoofair said:
guys some one please help me . i installed http://forum.xda-developers.com/showthread.php?p=44860224 in xperia tx and now i think its bricked. it shows only sony logo. afterthat its switching off again. please help me. is there a way to force flash rom?
Click to expand...
Click to collapse
Mad Marty said:
First try to repair using PC Companion, if that doesn't work try to flash a stock ROM using Flashtool.
Sent from my LT30p using xda app-developers app
Click to expand...
Click to collapse
The advice to fix your problem by mad marty is correct. The error is because that rom only works with xperia T unless you flash a TX patch. It is all explained in the thread, reading is a great thing.

gregbradley said:
The advice to fix your problem by mad marty is correct. The error is because that rom only works with xperia T unless you flash a TX patch. It is all explained in the thread, reading is a great thing.
Click to expand...
Click to collapse
bro but how to flash a rom . my phone is not even showing recovery mode. just showing sony logo and going off

romeoofair said:
bro but how to flash a rom . my phone is not even showing recovery mode. just showing sony logo and going off
Click to expand...
Click to collapse
You use pccompanion or flashtool. You do not even have to turn the phone on for those to work.
Download pccompanion from sony website and follow the instructions to repair your phone.

gregbradley said:
You use pccompanion or flashtool. You do not even have to turn the phone on for those to work.
Download pccompanion from sony website and follow the instructions to repair your phone.
Click to expand...
Click to collapse
pc companion not detecting phone

and i also cant turn on usb debugging mode to flash as it cannot turn on the phone

romeoofair said:
pc companion not detecting phone
Click to expand...
Click to collapse
That's ok, just run the software update and choose the repair option when the update fails.
If that still does not work, then download flashtool from the very first post in the dev thread.
Install it.
run the drivers.exe file found in the installation path
choose flashmode, fastboot and TX drivers
then either
a) try pccomapanion again or
b) Flash a stock FTF file for the TX in flashtool

gregbradley said:
That's ok, just run the software update and choose the repair option when the update fails.
If that still does not work, then download flashtool from the very first post in the dev thread.
Install it.
run the drivers.exe file found in the installation path
choose flashmode, fastboot and TX drivers
then either
a) try pccomapanion again or
b) Flash a stock FTF file for the TX in flashtool
Click to expand...
Click to collapse
bro this is what i am getting when i try to flash
27/035/2013 20:35:48 - INFO - <- This level is successfully initialized
27/035/2013 20:35:48 - INFO - Flashtool Version 0.9.11.0 built on 2013-06-04 22:50:00
27/035/2013 20:35:53 - INFO - Device connected in flash mode
27/036/2013 20:36:02 - INFO - Device disconnected
27/036/2013 20:36:09 - INFO - Device connected in flash mode
27/036/2013 20:36:18 - INFO - Selected Xperia_TX / 9.1.B.1.67 / HK
27/036/2013 20:36:18 - INFO - Preparing files for flashing
27/036/2013 20:36:28 - INFO - Please connect your device into flashmode.
27/036/2013 20:36:29 - INFO - Opening device for R/W
27/036/2013 20:36:29 - INFO - Reading device information
27/036/2013 20:36:51 - INFO - Unable to read from phone after having opened it.
27/036/2013 20:36:51 - INFO - trying to continue anyway
27/036/2013 20:36:51 - INFO - Start Flashing
27/036/2013 20:36:51 - INFO - Processing loader
27/036/2013 20:36:51 - INFO - Checking header
27/036/2013 20:36:52 - INFO - Ending flash session
27/036/2013 20:36:52 - ERROR - Error in processHeader : 995 : The I/O operation has been aborted because of either a thread exit or an application request.
27/036/2013 20:36:52 - ERROR - Error flashing. Aborted
27/036/2013 20:36:52 - INFO - Device disconnected
27/037/2013 20:37:04 - INFO - Device connected with USB debugging off
27/037/2013 20:37:04 - INFO - For 2011 devices line, be sure you are not in MTP mode
27/037/2013 20:37:37 - INFO - Log written to C:\Flashtool\flashtool_2013-08-27_08-35-48.log

gregbradley said:
That's ok, just run the software update and choose the repair option when the update fails.
If that still does not work, then download flashtool from the very first post in the dev thread.
Install it.
run the drivers.exe file found in the installation path
choose flashmode, fastboot and TX drivers
then either
a) try pccomapanion again or
b) Flash a stock FTF file for the TX in flashtool
Click to expand...
Click to collapse
finally worked . thanks a lot bro

My xperia z thinks it's Galaxy Nexus

Hi guys, i bought phone off ebay and under model number it says: "Galaxy Nexus". Everything works fine, it has all Sony features and is definitely not a galaxy nexus .
I know i need root to change build.prop, but i can't achieve it since doomlord's tool says galaxy nexus is not supported. (it's 6602 on 10.3.A.0.423 firmware btw)
Here's what it says:
Device detected: Galaxy Nexus (10.3.A.0.423)
Galaxy Nexus (10.3.A.0.423) is not supported.
You need to manage to get remap_pfn_range addresses.
Click to expand...
Click to collapse
Unlocking bootloader and reflashing tft is not an option for me, since i still want to preserve TA partition.
P.S.
doomlord if by any chance you're reading this, can you please add exception to your tool for it to accept Galaxy Nexus (10.3.A.0.423) and send it to me?

Try to reflash the firmware with flashtool.

I'm trying to do that, but phone restarts in about 20 seconds when it's in flashmode.
Flashtool is still unpacking firmware when phone already reboot by itself. I have all drivers installed correctly and am using windows 8.
Maybe that's the problem?

Nikoloz17 said:
I'm trying to do that, but phone restarts in about 20 seconds when it's in flashmode.
Flashtool is still unpacking firmware when phone already reboot by itself. I have all drivers installed correctly and am using windows 8.
Maybe that's the problem?
Click to expand...
Click to collapse
I'm not sure if u r doing this, but connect the phone only when the pop-up appears asking you to "Connect your phone in Flashmode" i.e. Phone switched off ,Volume Down button & then connect the USB.

I'm doing that, but it still restarts by itself after a while
03/037/2013 23:37:47 - INFO - <- This level is successfully initialized
03/037/2013 23:37:47 - INFO - Flashtool Version 0.9.10.2beta6 built on 2013-04-21 22:23:00
03/037/2013 23:37:52 - INFO - Device disconnected
03/038/2013 23:38:01 - INFO - Selected sony xperia z / 10.3.A.0.423 / C6602
03/038/2013 23:38:02 - INFO - Preparing files for flashing
03/039/2013 23:39:16 - INFO - Please connect your device into flashmode.
03/039/2013 23:39:22 - INFO - Device connected in flash mode
03/040/2013 23:40:23 - INFO - Device disconnected
Click to expand...
Click to collapse

Nikoloz17 said:
I'm doing that, but it still restarts by itself after a while
Click to expand...
Click to collapse
Instead of a normal power off,try a hard reset i.e. Hold Volume up & Power Button for 15 seconds.Release when u feel 3 vibrations.Then try to flash again.

thanks for such swift responses guys.
But i still got the same problem. Flashtool sees it, does nothing and after a while phone restarts.

Nikoloz17 said:
thanks for such swift responses guys.
But i still got the same problem. Flashtool sees it, does nothing and after a while phone restarts.
Click to expand...
Click to collapse
I'm sorry but I'm just trying to help u out with my limited knowledge.
Your Flashtool seems like an old/beta version.Get the latest here
http://www.flashtool.net/download.html
The one that says: Windows Edition : v0.9.11.0 – MD5 : A0F880F3CF420A31D86026F49A2013D7

thanks a lot. That solved it

Nikoloz17 said:
thanks a lot. That solved it
Click to expand...
Click to collapse
Glad I could help.

[Q] My phone wont boot

I tried to upgrade my xperia Z and it went off since then the phone wont boot pass a sony sign telling update failed make sure your phone is connected and try again,I have done everything possible but it still wont work please can anyone put me through on steps on how to get my phone back to life because i had not even used for the for 24 hours when this happened a friend of mine tried to use flash tool but got this message and still the phone wont work.
29/019/2014 18:19:36 - ERROR - Processing of emmc_appsboot_S1_Boot_Lagan_1.1.1_1_HWID_7190E1_OEM0.sin finished with errors.
29/019/2014 18:19:36 - INFO - Ending flash session
29/019/2014 18:19:36 - ERROR - ERR_SEVERITY="MINOR";ERR_CODE="0017";ERR_DYNAMIC="0x80080021 ";
Thanks to everyone who helped problem has been solved

troyg1 said:
I tried to upgrade my xperia Z and it went off since then the phone wont boot pass a sony sign telling update failed make sure your phone is connected and try again,I have done everything possible but it still wont work please can anyone put me through on steps on how to get my phone back to life because i had not even used for the for 24 hours when this happened a friend of mine tried to use flash tool but got this message and still the phone wont work.
29/019/2014 18:19:36 - ERROR - Processing of emmc_appsboot_S1_Boot_Lagan_1.1.1_1_HWID_7190E1_OEM0.sin finished with errors.
29/019/2014 18:19:36 - INFO - Ending flash session
29/019/2014 18:19:36 - ERROR - ERR_SEVERITY="MINOR";ERR_CODE="0017";ERR_DYNAMIC="0x80080021 ";
Click to expand...
Click to collapse
Here is the solution:
http://forum.xda-developers.com/xperia-z/general/post-questions-help-troubleshooting-t2116920

troyg1 said:
I tried to upgrade my xperia Z and it went off since then the phone wont boot pass a sony sign telling update failed make sure your phone is connected and try again,I have done everything possible but it still wont work please can anyone put me through on steps on how to get my phone back to life because i had not even used for the for 24 hours when this happened a friend of mine tried to use flash tool but got this message and still the phone wont work.
29/019/2014 18:19:36 - ERROR - Processing of emmc_appsboot_S1_Boot_Lagan_1.1.1_1_HWID_7190E1_OEM0.sin finished with errors.
29/019/2014 18:19:36 - INFO - Ending flash session
29/019/2014 18:19:36 - ERROR - ERR_SEVERITY="MINOR";ERR_CODE="0017";ERR_DYNAMIC="0x80080021 ";
Click to expand...
Click to collapse
DO NO POST QUESTIONS IN GENERAL!!!!!!!!!!
btw.try another ftf
Sent from my C6603 using Tapatalk

Phone
androidfreak70 said:
DO NO POST QUESTIONS IN GENERAL!!!!!!!!!!
btw.try another ftf
Sent from my C6603 using Tapatalk
Click to expand...
Click to collapse
I am sorry i do not know much about phones or how to solve this problem i gues i must be doing this all wrong please can you put me through on steps on how to handle this? I am also sorry for posting where i shouldnt

troyg1 said:
I am sorry i do not know much about phones or how to solve this problem i gues i must be doing this all wrong please can you put me through on steps on how to handle this? I am also sorry for posting where i shouldnt
Click to expand...
Click to collapse
Ok no problem! all newbies post in wrong place
By the way:
Download latest flashtool from here and install it then after install finish go to the place where you install flashtool and find folder called DRIVERS open it and you will find an exe file open it and select xperia z- flashmode drivers - fastboot drivers then install
Get the FTF file for flashtool like THAT
After the ftf download finish put the ftf file in "frimware" folder in the place you installed flashtool
Open flashtool then click the lighning icon
Select your downloaded FTF
After few minutes you will see screen appear says WAITING FOR FLASH MODE
Turn off you phone
Hold the volume down button then connect your phone with your pc with usb cable
After few minutes you will see your phone repaired
Bro... All the "device not booting" problems are easy! Flashtool is your friend:angel:

Xperia wont boot
androidfreak70 said:
Ok no problem! all newbies post in wrong place
By the way:
Download latest flashtool from here and install it then after install finish go to the place where you install flashtool and find folder called DRIVERS open it and you will find an exe file open it and select xperia z- flashmode drivers - fastboot drivers then install
Get the FTF file for flashtool like THAT
After the ftf download finish put the ftf file in "frimware" folder in the place you installed flashtool
Open flashtool then click the lighning icon
Select your downloaded FTF
After few minutes you will see screen appear says WAITING FOR FLASH MODE
Turn off you phone
Hold the volume down button then connect your phone with your pc with usb cable
After few minutes you will see your phone repaired
Bro... All the "device not booting" problems are easy! Flashtool is your friend:angel:
Click to expand...
Click to collapse
I tried this and got this error
30/026/2014 08:26:02 - ERROR - Processing of loader.sin finished with errors.
30/026/2014 08:26:02 - INFO - Ending flash session
30/026/2014 08:26:02 - ERROR -
30/026/2014 08:26:02 - ERROR - Error flashing. Aborted
30/026/2014 08:26:03 - INFO - Device connected in flash mode

troyg1 said:
I tried this and got this error
30/026/2014 08:26:02 - ERROR - Processing of loader.sin finished with errors.
30/026/2014 08:26:02 - INFO - Ending flash session
30/026/2014 08:26:02 - ERROR -
30/026/2014 08:26:02 - ERROR - Error flashing. Aborted
30/026/2014 08:26:03 - INFO - Device connected in flash mode
Click to expand...
Click to collapse
hmm
try SUS from http://www.sonymobile.com/in/tools/update-service/
download and install and you'll understand how to use it when you open it
Xperia™ Z (C6602) with tapatalk

troyg1 said:
I tried to upgrade my xperia Z and it went off since then the phone wont boot pass a sony sign telling update failed make sure your phone is connected and try again,I have done everything possible but it still wont work please can anyone put me through on steps on how to get my phone back to life because i had not even used for the for 24 hours when this happened a friend of mine tried to use flash tool but got this message and still the phone wont work.
29/019/2014 18:19:36 - ERROR - Processing of emmc_appsboot_S1_Boot_Lagan_1.1.1_1_HWID_7190E1_OEM0.sin finished with errors.
29/019/2014 18:19:36 - INFO - Ending flash session
29/019/2014 18:19:36 - ERROR - ERR_SEVERITY="MINOR";ERR_CODE="0017";ERR_DYNAMIC="0x80080021 ";
Click to expand...
Click to collapse
Whats your phone model 6603 or 6602

My Xperia Z wont boot
androidtweaker1 said:
Whats your phone model 6603 or 6602
Click to expand...
Click to collapse
its 6603

troyg1 said:
its 6603
Click to expand...
Click to collapse
using win 7 or 8?

My Xperia Z wont boot
androidtweaker1 said:
using win 7 or 8?
Click to expand...
Click to collapse
I am using win 8

Haven't you already fixed your problem?
This post in your duplicate topic suggests that you have. If so, then just say so instead of letting people carry on trying to help you.
Sent from my C6603 using Tapatalk

troyg1 said:
I am using win 8
Click to expand...
Click to collapse
Try this

Reviving a HardBricked Xperia SP 5302

Hi all,
After long hours of troubleshooting and failures ..... I am here to ask for help.
I was trying to restore my Phone's Stock ROM (from CM 12.1) and I guess I chose the wrong version of the ROM (5303) and now, my Xperia is gone in deeeeeep sleep :crying:, and its now hard bricked.
I've tried lots of things like eMMC, S1Tool (Emergency mode)... but it seems that I'm unable to revive my phone back to life. S1 Tool in Emergency Mode seems to be working some times but as the files "SIN_FILE_SET" is for 5303 instead so it is not working and gives me error
Code:
will use DLOAD protocol ...
0808010600900000
0D0F50424C5F446C6F6164564552322E30
162001000100
17004001000100E1108800
1801000F43240892D02F0DC96313C81351B40FD5029ED98FF9EC7074DDAE8B05CDC8E1
[COLOR="Red"]PHONE NOT SUPPORTED IN THIS MODE[/COLOR]
Elapsed:34 secs.
Can anyone help me here

doomedXperia said:
Hi all,
After long hours of troubleshooting and failures ..... I am here to ask for help.
I was trying to restore my Phone's Stock ROM (from CM 12.1) and I guess I chose the wrong version of the ROM (5303) and now, my Xperia is gone in deeeeeep sleep :crying:, and its now hard bricked.
I've tried lots of things like eMMC, S1Tool (Emergency mode)... but it seems that I'm unable to revive my phone back to life. S1 Tool in Emergency Mode seems to be working some times but as the files "SIN_FILE_SET" is for 5303 instead so it is not working and gives me error
Code:
will use DLOAD protocol ...
0808010600900000
0D0F50424C5F446C6F6164564552322E30
162001000100
17004001000100E1108800
1801000F43240892D02F0DC96313C81351B40FD5029ED98FF9EC7074DDAE8B05CDC8E1
[COLOR="Red"]PHONE NOT SUPPORTED IN THIS MODE[/COLOR]
Elapsed:34 secs.
Can anyone help me here
Click to expand...
Click to collapse
As far as I might remember, flashing another model's ftf shouldn't really damage the phone, but I am not sure about that. Since you said that you did so and hard bricked your device, then i guess the answer is now otherwise.
Anyway, i have this one neat tip stored in my head thanks to one of our old member which i apparently forgot who Hold volume button down, connect to pc and press the yellow hard reboot button located at the back of the xperia SP until it reboots (not until it vibrates). This method however is untested by me because well, i haven't hard bricked my XSP. This should allow your XSP to boot into flashmode, if it can still properly boot. If it worked, then proceed flashing proper FTF. Note, this will indeed require many retries. Try until you're fed up, then confirm that this method didn't work for you.

Thanks for your help. That indeed did not worked :crying:
Now the phone when connected to PC is only recognised as "Qualcomm HS-USB QDLoader 9800"
I've tried to fix it using QPST, MIFlash using MPRG8960.hex and 8960_msimage.mbn, but I'm unable to find the right patch0.xml and rawprogram0.xml I guess

Can anybody help please

doomedXperia said:
Can anybody help please
Click to expand...
Click to collapse
i have hardbricked my xsp C5302 too before 6months havent find any solution till now ,but if setool supports c5302 it can be fixed but they are not having loaders for c5302 (and they asked me to forget about setool supporting c5302 and it cant be fixed for ever), so impossible *for now*
if you find any other solution post it here

@doomedXperia
same story with my c5302, s1 tool doesn't support.
but there is this setool, s1 tool is based on this tool. maybe it'll work :/
http://support.setool.net/showthread.php?3-UPDATES-AND-NEWS/page666
edit : SEtool also doesn't support c5302. :/