Hey guys,
Newbie here I have flashed a couple of previous devices but never a samsung until now.
It the S5 AT&T version.
I followed the instructions here:
http://forum.xda-developers.com/att...w-to-update-to-g900aoca-5-0-keeproot-t3076803
But keep getting the error:
e: footer is wrong
e: signature verification failed
Installation aborted.
And the ROM doesn't load.
Please advice. The device is rooted.
If you are already rooted use flash fire application and flash it ..i also use that instruction to update my g900a model to 5.0 ..
Sent from my SAMSUNG-SM-G900A
Related
Hi, i got this new nexus one and its running on Android 2.2 and i want to update it 2.2.2, i downloaded the update, put it in the root of the SD card, entered the boot menu and clicked on apply update.zip and i got the following message, why am i getting this error:
"Finding update package, Opening update package, verifying update package,
E: Failed to verify whole -file signature
E: Signature verification failed
Installation aborted"
I am running on Android 2.2
Bandbase version 32.41.00.32U_5.08.00.04
Kernel version 2.6.32.9-27227-g3c98b0d [email protected]#1
Build number 2.16.405.1 CL223106 release-keys
I have already unlocked the bootloader.
The boot menu says NEXUSONE PVT SHIP S-ON
HBOOT-0.35.0017
MICROP-0c15
No one to give an idea?
Sent from my Nexus One using XDA App
It's because you got the phone from videotron of vodafone. I can tell because of your build number it means that you can't update because your are on a carrier tweaked ROM for instructions on how to get back to stock see wiki http://forum.xda-developers.com/wiki/index.php?title=Nexus_One/Guides_%26_Tutorials#Unroot_.2F_Restore_your_Nexus after you follow this tutorial you will be on frg33 then you can update what ever your want from there.
Thanks so much. I shall try that and let you know if it worked or not. Thanks so much for the info.
Sent from my Nexus One using XDA App
Hey, i used the PASSIMG method and it worked, thanks, i am now running gingerbread and in the process of rooting it.. thanks
Sent from my Nexus One using XDA App
Thank you both for this thread. I bought a Nexus One off of eBay recently and it must have come from the same batch. I had the same build number and could not update manually or otherwise.
Minutes after I installed the stock firmware, the phone was automatically updating to 2.3.4.
I am a happy camper now.
Any help please...
I can not restore my backup
I was testing a ROM (LiquidSmooth) and when I installed a different Kernel (Faux123) the cellphone never started,
Then I made a wipe, but never crossed the "Application update."
Then I reistalled the ROM but nothing happen and now when try to restore my last backup .. I get the lines:
E: Error opening '/data/misc/wifi/wpa_supplicant'
E: Error opening '/data/ssh/empty'
E: Error opening '/data/lost+found'
E: Error opening '/data/hostapd'
E: Error opening '/data/time'
Done
And the restoring process fail
So, then i tried installing its original firmware but a RED warning appear
Downgraded security version
update gpt_main version failed
preflash validation failed for gpt
so, I believe this will brick my phoen
I have an Unlocked XT1058
and my last ROM was Project X V3 Android .4.4.2
gueszman said:
Any help please...
I can not restore my backup
I was testing a ROM (LiquidSmooth) and when I installed a different Kernel (Faux123) the cellphone never started,
Then I made a wipe, but never crossed the "Application update."
Then I reistalled the ROM but nothing happen and now when try to restore my last backup .. I get the lines:
E: Error opening '/data/misc/wifi/wpa_supplicant'
E: Error opening '/data/ssh/empty'
E: Error opening '/data/lost+found'
E: Error opening '/data/hostapd'
E: Error opening '/data/time'
Done
And the restoring process fail
So, then i tried installing its original firmware but a RED warning appear
Downgraded security version
update gpt_main version failed
preflash validation failed for gpt
so, I believe this will brick my phoen
I have an Unlocked XT1058
and my last ROM was Project X V3 Android .4.4.2
Click to expand...
Click to collapse
It appears you tried to flash a pre-4.4.2 SBF to your phone... It is stated multiple places throughout the forum that you can NOT downgrade to any version prior to 4.4.2 once on 4.4.2
You say you flashed the 'original firmware' - I take that to mean you flashed a 4.2.2 or 4.4 SBF?
You should -try- to SBF back to stock by following the manual method in the Return to Stock thead: http://forum.xda-developers.com/moto-x/general/guide-moto-x-return-to-100-stock-using-t2446515
Use the 4.4.2 SBF for your carrier/model. As long as you can use fastboot, we can -probably- get you fixed up.
If you can't get that to work, you may try your luck at the methods listed in the "Resurrecting a Bricked Moto X" Thread: http://forum.xda-developers.com/moto-x/general/how-to-resurrecting-bricked-moto-x-t2629057
Good Luck
samwathegreat said:
It appears you tried to flash a pre-4.4.2 SBF to your phone... It is stated multiple places throughout the forum that you can NOT downgrade to any version prior to 4.4.2 once on 4.4.2
You say you flashed the 'original firmware' - I take that to mean you flashed a 4.2.2 or 4.4 SBF?
You should -try- to SBF back to stock by following the manual method in the Return to Stock thead: http://forum.xda-developers.com/moto-x/general/guide-moto-x-return-to-100-stock-using-t2446515
Use the 4.4.2 SBF for your carrier/model. As long as you can use fastboot, we can -probably- get you fixed up.
If you can't get that to work, you may try your luck at the methods listed in the "Resurrecting a Bricked Moto X" Thread: http://forum.xda-developers.com/moto-x/general/how-to-resurrecting-bricked-moto-x-t2629057
Good Luck
Click to expand...
Click to collapse
Thank you so much,
My error was trying to flash a lower version of my Firmware.
I appreciate your help
:good:
Hey everyone, I just downgraded from 5.0 to 4.4.2 and have root. Now I'm checking how to get to 5.0 with root? Do I just check for IT'S updates?
lesd777 said:
Hey everyone, I just downgraded from 5.0 to 4.4.2 and have root. Now I'm checking how to get to 5.0 with root? Do I just check for IT'S updates?
Click to expand...
Click to collapse
If you have Safestrap http://forum.xda-developers.com/showthread.php?t=2572978 installed you can just do, OC1 Stock Rooted Very Easy Procedure http://forum.xda-developers.com/showpost.php?p=59666958&postcount=2. Just trying to do the updates will fail because it's rooted. If you don't have Safestrap installed, then you will need Busybox https://play.google.com/store/apps/details?id=stericson.busybox&hl=en installed, if you didn't install it already.
Thanks for the links and info. Whenever I try to flash the file "SM-900A_OC1_Lollipop_Rooted_Rom.zip" from the URL given, safestrap gives me an error after extracting the data. I'm getting " some changes failed" E: executing updater binary in zip". I activated the rom slot1, then wiped cache/davlik a few times, then tried to install the OC1 Rooted zip file. Any suggestions what I'm overlooking?
I've a XT 1092 bought in Germany, now it is:
Andriod version: 5.0
System version: 22.21.19.victara_retde.retdeall.en.DE.retde
Build number: LXE22.46-19
What I've done on it:
1, Unlock,Root
2, Being unable to do OTA, download a German version of 5.0, recovery to this 5.0 through fastboot
Now there is always system update notification on the cell phone, so I download it automatically and try to update it.
Then the little robot appears and updating process starts.
But it failed every time, after power on the phone, it just says no change was made.
I enter the fastboot mode on phone through volume down and power button, and it says:
Device is unlocked. status code: 3
Software status: modified.
How could I successfully do an OTA?
Why it still says modified even after I recovered the phone to a stock version 5.0?
Many thanks, and wish you all a Merry Christmas!
vegetasummer said:
I've a XT 1092 bought in Germany, now it is:
Andriod version: 5.0
System version: 22.21.19.victara_retde.retdeall.en.DE.retde
Build number: LXE22.46-19
What I've done on it:
1, Unlock,Root
2, Being unable to do OTA, download a German version of 5.0, recovery to this 5.0 through fastboot
Now there is always system update notification on the cell phone, so I download it automatically and try to update it.
Then the little robot appears and updating process starts.
But it failed every time, after power on the phone, it just says no change was made.
I enter the fastboot mode on phone through volume down and power button, and it says:
Device is unlocked. status code: 3
Software status: modified.
How could I successfully do an OTA?
Why it still says modified even after I recovered the phone to a stock version 5.0?
Many thanks, and wish you all a Merry Christmas!
Click to expand...
Click to collapse
To successfully do OTA, your system must fully unmodified, this including no custom recovery, unrooted, stock boot logo, etc. So, if your system only rooted, you have to unroot first. Or the easiest way, just flash the stock system and recovery image, then perform OTA.
Sent from my XT1095 using Tapatalk
Nevermind, delete.
bimasakti85 said:
To successfully do OTA, your system must fully unmodified, this including no custom recovery, unrooted, stock boot logo, etc. So, if your system only rooted, you have to unroot first. Or the easiest way, just flash the stock system and recovery image, then perform OTA.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
thanks for your replay.
my x2 is now on a German version 5.0, and unlocked.
i think it is unrooted, but truth be told the last step I had taken before running into this OTA issue was returning the rooted phone to 5.0 by fastboot.
so now I'm even not sure weather it is rooted or not.
I've tried the steps regarding below method with stock ROM, hoping it can return to stock status and be ok to do OTA.
http://forum.xda-developers.com/moto-x-2014/general/guide-return-to-stock-official-status-t3274121
Question: is this what you've suggested "flash the stock system and recovery image"?
but when i access the bootloader, it stays the same as before, and says:
device is unlocked. status code: 3
software status: modified.
then I put the zip stock ROM into phone, and tried to do OTA on phone both with original name and modified name(update.zip)
But after selecting the ROM in recovery, it says:
qe 1/1
--install/data/media/0/update.zip...
finding update package..
opening update package...
verifying update package...
E:footer is wrong
E:signature verification failed
installation aborted.
all the thing i want is being able to to OTA, I have searched some threads both on domestic forum in China and on XDA
but no one works.
thanks in advance.
vegetasummer said:
all the thing i want is being able to to OTA, I have searched some threads both on domestic forum in China and on XDA
but no one works.
thanks in advance.
Click to expand...
Click to collapse
Why would you want to do an OTA?
Just grab the newest ROM and flash it.
I've seen a 6.0 XT1092 ROM somewhere on these forums.
vegetasummer said:
thanks for your replay.
my x2 is now on a German version 5.0, and unlocked.
i think it is unrooted, but truth be told the last step I had taken before running into this OTA issue was returning the rooted phone to 5.0 by fastboot.
so now I'm even not sure weather it is rooted or not.
I've tried the steps regarding below method with stock ROM, hoping it can return to stock status and be ok to do OTA.
http://forum.xda-developers.com/moto-x-2014/general/guide-return-to-stock-official-status-t3274121
Question: is this what you've suggested "flash the stock system and recovery image"?
but when i access the bootloader, it stays the same as before, and says:
device is unlocked. status code: 3
software status: modified.
then I put the zip stock ROM into phone, and tried to do OTA on phone both with original name and modified name(update.zip)
But after selecting the ROM in recovery, it says:
qe 1/1
--install/data/media/0/update.zip...
finding update package..
opening update package...
verifying update package...
E:footer is wrong
E:signature verification failed
installation aborted.
all the thing i want is being able to to OTA, I have searched some threads both on domestic forum in China and on XDA
but no one works.
thanks in advance.
Click to expand...
Click to collapse
Do you try to flash the full 5.1 stock rom with full wipe and then take th OTA update?
Full Roms for German Retail:
https://drive.google.com/open?id=0B...w3a1IzVFN6U2d3NFQ4cEVuNzVJTDZjamstdGxSbk90dTA
vegetasummer said:
thanks for your replay.
my x2 is now on a German version 5.0, and unlocked.
i think it is unrooted, but truth be told the last step I had taken before running into this OTA issue was returning the rooted phone to 5.0 by fastboot.
so now I'm even not sure weather it is rooted or not.
I've tried the steps regarding below method with stock ROM, hoping it can return to stock status and be ok to do OTA.
http://forum.xda-developers.com/moto-x-2014/general/guide-return-to-stock-official-status-t3274121
Question: is this what you've suggested "flash the stock system and recovery image"?
but when i access the bootloader, it stays the same as before, and says:
device is unlocked. status code: 3
software status: modified.
then I put the zip stock ROM into phone, and tried to do OTA on phone both with original name and modified name(update.zip)
But after selecting the ROM in recovery, it says:
qe 1/1
--install/data/media/0/update.zip...
finding update package..
opening update package...
verifying update package...
E:footer is wrong
E:signature verification failed
installation aborted.
all the thing i want is being able to to OTA, I have searched some threads both on domestic forum in China and on XDA
but no one works.
thanks in advance.
Click to expand...
Click to collapse
Did you flashed 5.1 or 5.1 based custom rom previously like cm12. 1?
I'm facing the same problem. Did you get any solution?
I've been trying for two-weeks to apply the 6.0 OTA to my Moto X 2nd Gen XT1095 phone.
The phone is rooted with CWP recovery rom inplace.
After the OTA is download and the phone reboots to apply it, I get:
Install Untrusted Package?
THIS CANNOT BE UNDONE
- No
- Yes - Install untrusted zip
CWM-based Recovery v6.0.5.1
E: INvalid command argument
Finding update package...
Opening update package...
Verifiying update package...
E: failed to verify whole-file signature
E: signature verification failed
Package expects build fingerprint of:
motorola/victara_tmo/victara:5.1/LPE2.32-21.6/7:user/release-keys
or
motorola/victara_tmo/victara:6.0/MPE24.49-18/20:user/release-keys
This device has:
motorola/cm_victara/victara:4.4.4/KTU84Q/6e7464298e:eng/test-keys
Error in /cache/Blur_Version.23.16..6.victara_tmo.tmo.en.US.zip
---
1. I don't understand the reference to victata:4.4.4 as I'm running Android 5.1 right now.
2. I can't find a recovery image for T-Mobile for the XT1095 to return to factory image.
3. I presume the Blur_Version above -is- the OTA image but I cannot force it to apply
(and probably shouldn't)
4. Motorola isn't making factory images available for non-developer models.
I'd be happy to wipe it and return to factory image, but cannot find a way to get there
without downloading the factory images from stashed places I cannot seem to find.
Any advice?
You must have stock recovery and stock system to apply the ota
What system version are you at right now?
If you have root and recovery, just flash the stock xt1095 6.0 rom from the android developmemt forum...
Factory reset, install zip and that's it..
As mentioned above, you can't take ota in your situation.
Red_81 said:
You must have stock recovery and stock system to apply the ota
What system version are you at right now?
Click to expand...
Click to collapse
Model Number: Moto X (2nd Generation)
Model: XT1095
System Version: 23.16.6.victara_tmo.tmo.en.US
Build Version: LPE23.32-21.6
Android Version: 5.1
Baseband Version: MSM8974BP_4235210.110.09.11R
VICTARA_TMO_CUST
I'm just trying to find my way to a stock recovery and a stock system image so I can reflash.
OrenGazala said:
If you have root and recovery, just flash the stock xt1095 6.0 rom from the android developmemt forum...
Factory reset, install zip and that's it..
As mentioned about, you can't take ota in your situation.
Click to expand...
Click to collapse
Doesn't sound hard, except for the part about -finding- a stock xt1095 6.0 rom.
I'm looking though but not finding the correct version of stock rom. A lot of
1096 and many in non-english variants. Pointers appreciated if you have time.
xanalogica said:
Doesn't sound hard, except for the part about -finding- a stock xt1095 6.0 rom.
I'm looking though but not finding the correct version of stock rom. A lot of
1096 and many in non-english variants. Pointers appreciated if you have time.
Click to expand...
Click to collapse
Flash this one: http://forum.xda-developers.com/moto-x-2014/development/rom-xt1095-flashable-stock-rom-t3277874
And after that root your phone with that: http://forum.xda-developers.com/moto-x-2014/development/root-root-moto-x-2014-android-t3249105
Download supersu 2.52 and the attachment for xt1095.
Just for comparison, antutu benchmark on stock 5.1 verizon's gave 36000~ and now on stock 6.0 xt1095 (which is really close to clean aosp) gave 55000~
Have fun