Related
Hey people, look at these 2 pictures, that I just have taken:
With the backcover on:
http://www.4shared.com/file/53179104/2a29789d/Med_cover.html
And without:
http://www.4shared.com/file/53179169/2c2a3a6/Uden_cover.html
As you can see, there is a big difference. Hmm, why haven't HTC done something to this problem?
Are you sure you were at the same distance?
And what about the focus point? It seems a bit different between the 2 pics.....
flaviopac said:
Are you sure you were at the same distance?
And what about the focus point? It seems a bit different between the 2 pics.....
Click to expand...
Click to collapse
Yes I'm very sure about that. I have tried with more pictures.
did you stick a 'lense protector' on the cover's lense screen? like if you stuck on a full body protector like invisibleSHIELD there'll be a piece for the lense cover too.
Or, did you forget to peel off the original one?
happyguy82 said:
did you stick a 'lense protector' on the cover's lense screen? like if you stuck on a full body protector like invisibleSHIELD there'll be a piece for the lense cover too.
Or, did you forget to peel off the original one?
Click to expand...
Click to collapse
Haha, no i'm not that stupid Nothing "protection" is on.
the "lens" that is part of the back cover is obviously not optically neutral. Pretty lame if you ask me.
Syphon Filter said:
the "lens" that is part of the back cover is obviously not optically neutral. Pretty lame if you ask me.
Click to expand...
Click to collapse
Without the back cover, the Diamond takes decent pictures, still slow on focusing and shutter release(you should see the Samsung F480, this little fellow shoots pictures almost like a normal digital cam) but pretty good for a 3.2 MP cam.
WITH back cover however, the pictures look like crap to me. Sometimes it looks like if the pictures have been taken through light fog and I can clean the lens cover as much as I want(not easy, tiny little bastard), after some time, the lens gets dirty/whatever again. Horrible, HTC definetely needs to find a better solution.
Here some more http://www.howardforums.com/showthread.php?t=1365731&page=43&pp=15
info
remove the small mirorr in a back cover that protect the camera from dust
Aqrab said:
remove the small mirorr in a back cover that protect the camera from dust
Click to expand...
Click to collapse
It will "destroy" the backcover? hmm. And when the mirror is gone, dust can easier come into the camera lens?
mooooooa said:
It will "destroy" the backcover? hmm. And when the mirror is gone, dust can easier come into the camera lens?
Click to expand...
Click to collapse
look i didnt try it but i think if we remove it the camera quality will increase
the htc p3600 and the touch dual doesnt have mirror for camera
Aqrab said:
look i didnt try it but i think if we remove it the camera quality will increase
the htc p3600 and the touch dual doesnt have mirror for camera
Click to expand...
Click to collapse
Yes, of course the quality will increase, when a cheap plastic cover is removed But hmm, my Diamond is 2 days old, and I don't want to already destroy a part of the cover
mooooooa said:
Yes, of course the quality will increase, when a cheap plastic cover is removed But hmm, my Diamond is 2 days old, and I don't want to already destroy a part of the cover
Click to expand...
Click to collapse
the problem is man that
when we want to clean the mirror we cant clean it good from the outside
we need to clean it to get better quality
Aqrab said:
the problem is man that
when we want to clean the mirror we cant clean it good from the outside
we need to clean it to get better quality
Click to expand...
Click to collapse
But we can't clean the mirror everytime we just wanna take a picture. That's not a good way?
mooooooa said:
But we can't clean the mirror everytime we just wanna take a picture. That's not a good way?
Click to expand...
Click to collapse
well ideally you should or you should remember not to put you fingers on the lens (not an easy task given the camera position i know) but lets be fair here, i mean its not as if you would take your stand alone digital camera, smear you greasy hands over the lens all day (+ let dust collect on it) and then expect it to take perfect pics...
be practical, if you remove the case screen for long you are gonna end up with scratches on the actual camera lens! and that's not easily replaceable now is it (not like the back cover...) lol
mooooooa said:
But we can't clean the mirror everytime we just wanna take a picture. That's not a good way?
Click to expand...
Click to collapse
yah i know
im jast saying when we want to clean it
remember not to put your fingers on the lens
What we need is a back cover with a piece of glass in place of the piece of plastic which covers the lense.
This seems like the only solution to me.
Its because the plastic isnt very durable, it does mist up the photos. If you look on coolsmartphone.com ive also took some pictures and they looked alot better without the back plastic cover on.
I just hope someone somewhere is reading this as i would pay for a back cover with glass instead of plastic lense cover.
The pictures are alot sharper and arent misty without the cover on.
tomchap said:
What we need is a back cover with a piece of glass in place of the piece of plastic which covers the lense.
This seems like the only solution to me.
Its because the plastic isnt very durable, it does mist up the photos. If you look on coolsmartphone.com ive also took some pictures and they looked alot better without the back plastic cover on.
I just hope someone somewhere is reading this as i would pay for a back cover with glass instead of plastic lense cover.
The pictures are alot sharper and arent misty without the cover on.
Click to expand...
Click to collapse
Your right!
white balance
Granted the backcover lens protector doesn't do justice to this phone. Adjusting the white balance does for improvement (say the lighhtbulb mode) I find. Again the camera does let this phone down, compared to others of similar spec. Can a software tweak solve the lag in motion when shooting in video mode at all? Is it as a 'simple' case as that I wonder!?
I just did some test shots with my xda diamond from germany and I honestly cant see a difference. can you tell which one is taken with the cover off?
Hello, so yesterday i noticed some scratches on the camera lens and i can feel them with fingernails.So i googled about scratches on lens and almost everywhere they said it does not affect pictures that much but when i try to take pics with my SP they turn out to be fuzzy/blurry.Im afraid the warranty doesnt cover it too
Any advice what should i do?
Sorry for my english and if this thread is in the wrong section feel free to move it
after 2 months the camera lens looks terrible. im not using protective case but it is in pocket on its own no keys or lighter next to it. somehow the camera LENS got nice scratches. there is a purple color shine on the lens like on eyeglasses which supposed to be scratch resistant layer but it has gone completely. since the lens is not covered physically i have to clean the fine dust off the lens to take photo. what i see the on closer look is that the scratches are drawing circles that makes me think the lens is so soft material that the cleaning causing the scratches. i guess its plastic. i havent checked it yet but after replacing it ill do a test. i ve found on sony support forum a link where u can buy replacement lens which is by description 100% glass.
interesting that the screen itself is very durable but this tiny round lens is a crap. disappointing from sony. very stupid mistake of chosing this material for such a nice phone. i am thinkin to call them and make a complaint. :crying:
Yup, mine is scratched too, every photo looks like Joan Collins c1986.
I believe it's just stuck on so should be easy to replace.
Sent from my C5303 using Tapatalk 2
faulty assembly?
My mate said that purple layer is a kinda filter (flare,uv or whatever) supposed to face to camera. Is that possible?
r1kkHUN said:
a link where u can buy replacement lens which is by description 100% glass.
Click to expand...
Click to collapse
Can you share the link? I might be looking to replace my lens if it's not too hard
Sent from my C5303 using xda app-developers app
ZakooZ said:
Can you share the link? I might be looking to replace my lens if it's not too hard
Sent from my C5303 using xda app-developers app
Click to expand...
Click to collapse
unfortunately I cant post link yet.
Stellatech dot com
Here are the links :
http://stellatech.com/sony-c5303-xperia-sp-camera-lens,a,en,814897.html
http://rounded.com/sony-xperia-sp-c530x-camera-lens.html
or on ebay.
I have the same problem, and I just bought one.
Here's a question for people who have changed it : do you have to unscrew the back of the phone (not just the back cover) or can you change it directly ?
From what I've seen, the lens and the "camera ring" might be "glued" directly, but might as well have to come off from the inside.
Another thing, there's one screw that's not directly visible, it's under the antenna, at the bottom of the phone...
Some help would be really appreciated !
Thx
I managed to get the ring off with just my finger nails, the ring and lens are two separate pieces, when the ring is off, the glass sits in a recess, so may be a bit tricky to remove.
Sent from my C5303 using Tapatalk now Free
Is there any purple coating on the replacement lens? If no than its just a plain glass and not like the original. I will just polish off the coating. On photo there is sharp area just as the clean area of the lens.
Thanks for the tip @technaudio.
@r1kkHUN : I'll tell you when I get it, but since it's an original part, I guess it'll be there, i'd make no sense otherwise.
Good luck with the polishing, I'm affraid I doubt it'll solve the problem though.
T cut or some fine rubbing compound that you polish a car with might work?
Sent from my C5303 using Tapatalk now Free
Hi.
Just got the new lens, and changed it.
Easy and fast, and the result is perfect, and for only 11€
There isn't any purple coating on the new one I got, but it seems to be okay, I'll try to take pictures in the sun as soon as the weather gets better.
I did a little guide about it on a french forum, if you want to have a look at the pictures.
http://forum.frandroid.com/topic/168392-tuto-changer-la-lentille-de-lapn-arrière/
Bye and thanks again.
My Z1 camera lens cover seems to have a lot of scratches, his is very bad effect on the quality of the captured images, is anyone have this problem before, can this cover repaced.
nyongrand said:
My Z1 camera lens cover seems to have a lot of scratches, his is very bad effect on the quality of the captured images, is anyone have this problem before, can this cover repaced.
Click to expand...
Click to collapse
I am not aware of anyone running into this issue before. If you set it on a rough surface or a surface with granules of sand, then that could definitely be the culprit. As far as replacing the lens goes, there is currently no way to get a hold of a replacement lens as far as I know.
If you mean the inside phone part then you'll have to replace the entire camera part. If you mean just the part that you can touch with your finger then you'll need to replace the back glass.
I'm having the same issue, there are some spots on top of the lenses on my phone that won't go away and *all* my photos are have the white color over exposed plus focusing is never sharp enough like other phones, I bought the phone the way it is now and I'm going to replace the back glass to see if it helps.
Alright, I was an idiot and managed to crack my glass camera lens cover. I purchased this : http://www.amazon.com/gp/product/B00RKFAZ5I/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1 and did the replacement, but my pictures appear sort of "hazy" or "foggy" for lack of a better term. I can still get it to focus really well, but the pictures don't pop like they used to.
The only thing I did while replacing that could have caused problems was using compressed air while the old cover was off to ensure none of the shattered glass was left in the actual camera lens mechanism. I made sure to hold the can at an angle so that none of the liquid came out, but i did notice the lens mechanism moving around (almost like a hockey puck) as the air interacted with it. I assumed this sort of free floating lens design had something to do with the optical image stabilization, so it didn't seem like a big deal. I put the new cover on with clean hands and thought everything was fine until I started taking pictures again.
Has anyone replaced the camera lens cover and experienced a similar issue? I've ordered another one to take another shot at it, and I'm actually going to take some test pictures while the cover is removed just to see if I did actually damage the lens itself...
I have the jump protection, but would rather fix it myself than pay 175 for a refurb that I'm going to replace in 4 months anyways.
Why not replace the whole back camera?
I dont know how easy is to remove the lens cover but check if pictures taken without cover are foggy or not. If foggy then camera lens is dirty, if sharp - camera lens cover is a problem.
Sent from my SM-N910T using XDA Free mobile app
My guess is it got moisture behind the lense, or the lense was dirty.
When they create that hardware it is sealed in 0% humidity. If it was even a rainy day when you installed the lense, it could have caused it to fog up.
Sent from my SM-N910T using XDA Free mobile app
What I did was pull mine back and clean it with some alcohol and a q-tip
Is there a part number for that?
Check out this item I found on eBay: http://pages.ebay.com/link/?nav=item.view&id=371237781680&alt=web
10-K said:
Check out this item I found on eBay: http://pages.ebay.com/link/?nav=item.view&id=371237781680&alt=web
Click to expand...
Click to collapse
Thanks, might give that a shot if it doesn't clear up with the next lens cover.
Did you peel the plastics on both sides of the lens cover? Also check if it's actually focusing. Maybe slap the phone and see if it refocuses. Afterall there are moving parts in there.
Is there a genuine saphire lens cover to buy anywhere? I to used the cheap replacement cover and my pictures are blurry and bad in bright light. My camera itself should be fine though.
My camera lens looks like there are some sort of bubbles or something under the glass. It doesn't affect the camera, because they're not in the field of view of the lens, but I've noticed these spots keep appearing, so they should eventually reach the center and ruin my images. Should I get this repaired or is this normal behavior?
Image link: http://imgur.com/dpiKvJ1
seklerek said:
My camera lens looks like there are some sort of bubbles or something under the glass. It doesn't affect the camera, because they're not in the field of view of the lens, but I've noticed these spots keep appearing, so they should eventually reach the center and ruin my images. Should I get this repaired or is this normal behavior?
Image link: http://imgur.com/dpiKvJ1
Click to expand...
Click to collapse
I'm not sure if thats dust but I would get that clean before it ruins the lens
fujirio said:
I'm not sure if thats dust but I would get that clean before it ruins the lens
Click to expand...
Click to collapse
It's not dust. I cleaned the lens before taking a picture, what you see is under the glass.
looks like condensation.
Try out the pressure test and look if your phone is still waterproof. Anyway i would send it in if you live in a country with reliable consumer protection laws and good warranty.
2mal16 said:
looks like condensation.
Try out the pressure test and look if your phone is still waterproof. Anyway i would send it in if you live in a country with reliable consumer protection laws and good warranty.
Click to expand...
Click to collapse
Yep you have gotten water into your phone, this happened to me 3 days after purchase of my Z3C. Open up the sim card flap (bottom left) and look in the little hole in the bottom, there should be a white square, this is the water sensor. If you have gotten water in your phone that white square will be a red / pink color.
Do a pressure test like 2mal16 said.
If you do not want to send it in for warranty you can get rid of the water using rice and a hair dryer - turn off the phone, open all the flaps and bury the phone in rice, in an air tight bag or container, leave the bag / container in the sun for at least 1 day and that should clear it. (depending on where you live 2-3 days might be better)
Next you can try opening the flaps (phone off) and holding the phone so that the open flaps are facing downwards (left side of the phone is facing down) and get a blow dryer / hair dryer and wave it up and down the top of the phone, where the camera is (this will heat the water and should make it come out of the flaps)