Phone hangs after factory reset - Sprint HTC One (M8)

I'm in the process of selling my H/K One M8 that has been S-Off'd and had an unlocked bootloader. However, once I factory reset it, the phone sits at the HTC screen for 3ish minutes until the setup screen appears and while it stays there I get a V08 Voicemail error. Is there anyway I can make this not happen? I'm hesitant to sell my phone because I'm scared someone will think it's broke, since the setup screen doesn't show up right away.

Related

AT&T Tilt locked in tri-colored screen! Help!

Yesterday I took my battery out of my phone to remove the dust from inside the phone. When i replaced the battery back into the phone, it booted up into the tri-color screen and has been there ever since. I haven't modified the phone since receiving it from AT&T at all. When i actually noticed the problem I tried to reset the phone through the hole on the bottom of the phone. At first, it booted up normally but was out of batteries since it had been running on a bright screen for a couple of hours. Thus it turned off immediately. I have tried to reset it again but it seems to do nothing. Since then when I put the battery back in and I turn the phone on it returns to the tri-colored screen and it says SERIAL in the bottom white area. When plugged into my computer it says USB in the white area. On the top of the tri colored screen, in the red area, it says:
KAIS1*0
SPL-1.56.0000
CPLD-8
I thought about downloading the newest ROM update from HTC but my phone wont sync with my computer, and the tutorial says it needs to in order to install properly. If anyone could help, please let me know!
Update!
I put the battery back into the phone and it booted up just fine....it was a little slow and worked normally for a couple of minutes. Soon it started to act up. When i plugged the phone into my computer it automatically started to freeze, when i unplugged it from the computer it would work just fine! I then turned my phone off again and now it is back to the tri-color screen again!
try hard-resetting the phone.
To do this, hold down the two soft keys at the front while pushing the stylus into the reset hole. Just make sure to back up any data you want, as it will delete it all (files, contacts, etc.)
Tried a Hard Reset
When I finished it, it just went back to that tri-colored screen. Now the phone will turn on every 10th time i try and work for a couple of minutes. When the screen turns off it wont turn back on when i push the power button. The green light still blinks though.
I have been having this exact same problem for a little while now, any help would be more than appreciated.
EDIT: Everything about the phone was AT&T stock ROM from Oct. '07.
i think it replacement time
hi all once again.i was using my kaiser yesterday then my phone went into tri screen.tried hard reset soft reset.phone reboots in tri screen.im using Duttys Official WM6.1 Rom 5.2.19716 UC.
ihave kais130 mfg /spl 1-0.0lipof /cpld-8 on screen.
if there is a solution to this i would appreciate help in resolving.thanks in advance
Another sad update!
Well as of this second my phone works okay...slower than usual....but in an hour or so the screen will turn off and the phone will stop working, i will take the battery out.....wait about 45 minutes and hope that it boots up normally. No one has any idea why this is happening to multiple people? I have had this phone for maybe 3-4 months. Is the failure rate that broad and fast on these phones???
WTF
This phone is ridiculous. Now if I keep the phone plugged into my computer so the screen wont time off, the phone works just as normal. The moment I unplug the phone from charging it decides to die on me after an hour or so!
this happened to me last nite.
spent hours and hours trying to fix.
ended up reflashing orig att rom..
everything is fine..
proceeded on to a cooked rom and all is well..
added some apps ..
so far -- awesome
Good News!
Magically my phone started syncing with my computer randomly. Thus it allowed me to flash the rom with the original ATT rom and so far my phone is back to normal working great!
tri screen sorted
i bought my kaiser off ebay..i couldnt sort tri screen.i had various roms on at various times .i had no warranty. on pay as you go.decided to take to local o2 shop.got it back today fully working for free.took them 8 days.
Hey, did you have any luck fixing this problem - I've been looking mad for a solution to my tri-screen problem, but no joy...
KAISI*0
SPL-1.93.0000
CPLD-8
appears on my screen.... I don't now how to fix this puppy and it's only a couple of months old...
I started plugging the charger in and soft reset and it would work until i could find a new OS for it, Rom or RUU I think, I am not sure if it works, but now I can't get it off Tri-Screen to run it..
Any help anyone please?
You better take a look here for a solution : http://forum.xda-developers.com/showthread.php?t=423486
jezzaflyboy said:
Hey, did you have any luck fixing this problem - I've been looking mad for a solution to my tri-screen problem, but no joy...
KAISI*0
SPL-1.93.0000
CPLD-8
appears on my screen.... I don't now how to fix this puppy and it's only a couple of months old...
I started plugging the charger in and soft reset and it would work until i could find a new OS for it, Rom or RUU I think, I am not sure if it works, but now I can't get it off Tri-Screen to run it..
Any help anyone please?
Click to expand...
Click to collapse

Tilt stuck on AT&T Screen

I have been having issues with my tilt for the past few days. Upon startup it will go to the initial AT&T screen and will stay there. The phone never dims and will stay there at least a few hours (that is as long as I have tested it).
One odd thing is that the Rom version info (red text at bottom) is missing from the screen.
Things I have tried.
Soft Boot (insert stylus into button by usb port)
Taking the battery out for a few hours and reinserting it
Hard Boot (insert stylus into soft boot hole while holding soft keys
Cold Boot as described here.
FYI. The hard boot appeared to work, but upon restart same AT&T screen. The cold boot appeared to work as well. Made it through the process, but after reboot, AT&T screen.
I have never flashed any cooked roms but did upgrade the the v6.1 rom from AT&T.
Anyone have any other suggestions of things I can try??
So what did you end up doing? I'm in the same situation... I can't figure out how to get the phone to boot so I can restore the att software.
I ended up sending it to HTC. I had to pay for shipping, but they fixed it and sent it back for free. HTC warrenty applies for 15 months from the date of manufactuer.
Ouch! I guess I better get mine shipped! Thanks for the reply.

[Q] HTC repaired phone - Developer Edition Boot Loop again - never rooted/flashed

EDIT: So i sent my phone in for repair, received it back a week later. Updated it to 4.3 immediately after i received it back. Less than a week of using it, the same boot loop problem is happening again. I am on my wits end, I don't know exactly what i am doing to make the phone to go into a boot loop. i haven't flashed any roms nor done any modifications to it, just installed the 4.3 through the System Update in the settings.
Can anyone help? I don't want to keep paying to ship my phone back everytime this happens.
One thing though, right before the boot loop problem happens, the phone will warn me that it will shut off in 10 seconds, that telling me to hold down a button to restart it. This specific warning happens before i shipped in my phone and after i received back my "repaired" phone...
The phone doesn't charge when plugged into the wall electrical outlet or through usb, it will just turn on and proceed into boot loop over and over again.
/Edit
HTC One Developer Edition 64 GB. Latest Android 4.1.2 official update. Never rooted/flashed/modified, I've only installed the system update through the phone.
I was texting on the phone and then it warned me that it will shut down in 1 second and then it rebooted. It has been stuck in the boot loop for the last few hours now.
I've tried holding the Volume Down button to boot into Bootloader screen, and it will only stay in that menu screen for 4 seconds and then proceeds to reboot again. It doesn't allow me to select the menu choices when press Vol up or Vol down buttons. Nothing happens.
I've called HTC support and set up a warranty device repair service ticket. Before I send the phone in for diagnose, is there anything else I should try? I've attached a pic of the Bootloader screen. Thank you.
zzzthump said:
HTC One Developer Edition 64 GB. Latest Android 4.1.2 official update. Never rooted/flashed/modified, I've only installed the system update through the phone.
I was texting on the phone and then it warned me that it will shut down in 1 second and then it rebooted. It has been stuck in the boot loop for the last few hours now.
I've tried holding the Volume Down button to boot into Bootloader screen, and it will only stay in that menu screen for 4 seconds and then proceeds to reboot again. It doesn't allow me to select the menu choices when press Vol up or Vol down buttons. Nothing happens.
I've called HTC support and set up a warranty device repair service ticket. Before I send the phone in for diagnose, is there anything else I should try? I've attached a pic of the Bootloader screen. Thank you.
Click to expand...
Click to collapse
From the snapshot,it looks like you're completely stock
i think you are good to go to claim your warranty!
Factory resets worth a shot. I wouldn't do much else though, for risk of voiding a warranty you're obviously gonna need....
_____________________________________
AT&T HTC M7ul
Baad Newz's InsertCoin 3.4-2
Flar2's Bulletproof 6.2
It finally ran out of battery, but when I plug it directly to the wall, it will not charge. It will go into a bootloop again...
your phone is good to go in warranty
criszz said:
your phone is good to go in warranty
Click to expand...
Click to collapse
Alright, I've called the HTC warranty support @1-866-449-8358 and the customer service agent started me up with a ticket. Now I'm waiting to hear back from the escalation ticket. What is the experience with warranty like? Appropriate response time? Agent on the phone told me that I'd most likely have to ship my phone to Futuretel Repair Centre for repair service...
So i sent my phone in for repair, received it back a week later. Updated it to 4.3 immediately after i received it back. Less than a week of using it, the same boot loop problem is happening again. I am on my wits end, I don't know exactly what i am doing to make the phone to go into a boot loop. i haven't flashed any roms nor done any modifications to it, just installed the 4.3 through the System Update in the settings.
Can anyone help? I don't want to keep paying to ship my phone back everytime this happens.
One thing though, right before the boot loop problem happens, the phone will warn me that it will shut off in 10 seconds, that telling me to hold down a button to restart it. This specific warning happens before i shipped in my phone and after i received back my "repaired" phone...
The phone doesn't charge when plugged into the wall electrical outlet or through usb, it will just turn on and proceed into boot loop over and over again.

[Q] My HTC HD7 wont do anything

I was cleaning out an apartment and found an HTC HD7 windows phone. everything on the outside looks fine to me, but as soon as i put the battery in it it boots up, thus making it impossible to get to the boot loader. When i try and shut it down it just keeps turning itself back on. Once it moves past the HTC splash screen it tells me to connect it to a computer. i tried that, downloaded the htc sync app and still nothing.. I want to get it up and running because, who can complain about a free phone. There is no sign of water damage. Any ideas?

Blank screen, no light or charging screen

I know this device is like almost 10 years old, but I recently bought one from eBay to mess around with and I flashed a rom, and trying to go back to stock, I flashed a zip bit it was for sprint, and so I needed up wiping my whole system. I went to reboot into bootloader to run the ruu, and just a blank screen. nothing else. for a brief moment i saw the charging screen, but now it gets warm but it’s just black. I’ve tried holding the buttons, didn’t work. Any fix?
update - it hard bricked

Categories

Resources