Related
Having found several Tempered Glass screen protectors I tried unsatisfactory, I decided to try a German one on the theory that their engineering is often good. I purchased a Mikvon one (available on Amazon and eBay). It seems perfect to me. It is precision cut and the fit and cut-outs are just right. Maybe it could be one millimetre wider each side but then it would be capable of being installed over the curved edge of the Oneplus 3 screen. The edges of the protector are neatly rounded and inconspicuous in use. I cannot see any of the dots or halos that are present on other products, and it adheres across its full surface. I also cannot detect any loss of sensitivity. When installed there were a couple of bubbles, but these were easily expelled. I am using this in conjunction with an Orzly Fusion Bumper case, which seems to give good all-round protection.
nottheusualtoday said:
Having found several Tempered Glass screen protectors I tried unsatisfactory, I decided to try a German one on the theory that their engineering is often good. I purchased a Mikvon one (available on Amazon and eBay). It seems perfect to me. It is precision cut and the fit and cut-outs are just right. Maybe it could be one millimetre wider each side but then it would be capable of being installed over the curved edge of the Oneplus 3 screen. The edges of the protector are neatly rounded and inconspicuous in use. I cannot see any of the dots or halos that are present on other products, and it adheres across its full surface. I also cannot detect any loss of sensitivity. When installed there were a couple of bubbles, but these were easily expelled. I am using this in conjunction with an Orzly Fusion Bumper case, which seems to give good all-round protection.
Click to expand...
Click to collapse
this thing does not go all the way to edge it clearly says It on their selling ad..
https://www.amazon.com/gp/offer-listing/B01EWIB950/ref=dp_olp_new_mbc?ie=UTF8&condition=new
It cannot go all the way to the edge because of the curved edges of the Oneplus 3 screen. It goes as close as possible. It is invisible in use and it really doesn't matter.
Pics?
Sent from my ONEPLUS A3003 using Tapatalk
Please post some pics
I tried to take some pics. But I could not find a way to do this without reflections on the screen. I tried indoors and out. Anyway the tempered glass protector didn't show in any of them, as it is darn near invisible. It goes to about 1.5 mm from where the black framing of the screen starts. In my opinion any greater would not offer additional protection.
Does it actually covers the entire viewable screen?
Sent from my ONEPLUS A3000 using Tapatalk
It is 1.5 to 2mm less than the full viewable area, both sides. But I am never concsious of the edges of the protector. They hardly show, maybe because they are well rounded. I accept it would be great to have a protector the full width. But since this one is otherwise so precisely cut, I feel the designer made it as big as possible taking account of the screen curvature.
nottheusualtoday said:
It is 1.5 to 2mm less than the full viewable area, both sides. But I am never concsious of the edges of the protector. They hardly show, maybe because they are well rounded. I accept it would be great to have a protector the full width. But since this one is otherwise so precisely cut, I feel the designer made it as big as possible taking account of the screen curvature.
Click to expand...
Click to collapse
Thin its same than OnePlus own (not the curved one) tempered glass. Of course this one is cheaper than OnePlus version. But with word "perfect" i though this would be more perfect like edge to edge or covering all of viewable area. I have Nillkin tempered glass installed to my phone. It covers all viewable area but of course it contains little halo on the sides but less than 1mm so its not big deal for me. I dont even see it when using phone.
It seems that all currently available on AliExpress (at least) tempered glass protection are flawed, because of:
1- Protectors that covers the body in full, and has some black areas: has actually glue only on the black non-transparent zones, but nothing on display area it self (so only display ages, upper and lower parts has glue), this makes it rubbish, because it will not stick well to the screen, one or two gaming sessions and it will end in recycle bin.
2- Fully transparent one, with full screen coverage: because 1+5 has 2.5D screen, those covers will not stick well on phone edges since tempered glass is rigid, this maybe can be used only with covers that overlap edges of the screen also.
3-Fully transparent one that don't cover all of the screen: those usually stick well, but only if they left about 5mm on each edge uncovered! I believe it is clear that such a gap ruins the protective purpose of the tempered glass, aside the ugly look due to gaps. (Again, having an edge overlapping cover could make it look better)
So it seems the only practical option for now is to use usual non glass protection unfortunately.
If I missed something or you have some suggestions please let me know..Some manufacturers claims that there protector is 4D, what means that it should solve all above issues, i didn't try those yet, anybody tested them?
I am regretting removing original 1+5 protection
As I bought and still use an Orzly tempered glass protector I concur with your analysis at this time. When I first applied the Orzly is was perfect without the issues some experienced but after 3+ weeks the sides must have lifted slightly due to my bumper case and dust particles got underneath next to the left/right buttons. Since then I've been religiously looking for an alternate that passes the case test but none so far have come to light.
I like the feel of the tempered glass so much that I've resisting going back to the film/plastic alternatives which I had always used in the past. I'm even considering going naked on the screen, relying on Gorilla Glass 5, but continue with a bumper case. Or the reverse, by using an Orzly but with no bumper case as I already have a dBrand skin applied. None of those options seem all that appealing. The one protector that seems to work with a 2.5D screen is the Galaxy 8's Whitestone Dome Glass but it's a crazy expensive $41USD and difficult to apply. I'm not sure even if a OnePlus 5 version was available I'd spend that much money.
I haven't had any luck with any tempered glass., due to point 2 which has been raised:
2- Fully transparent one, with full screen coverage: because 1+5 has 2.5D screen, those covers will not stick well on phone edges since tempered glass is rigid, this maybe can be used only with covers that overlap edges of the screen also.
Click to expand...
Click to collapse
After reading all of the reviews I decided just to leave the plastic one on until someone gets their act together and offers a proper tgsp for the OP5
Sent from my OnePlus5 using XDA Labs
Agreed with OP and all of above. I had and still have the Orzly TG protector on, but dust underneath. I want to go back to the usual plastic ones, but don't know which one covers as well/much as the original one that came with the phone. Any recommendations?
Sent from my ONEPLUS A5000 using Tapatalk
Im still waiting for my Nilkin glass protector to arrive (it's almost been a month, sigh)
If this one has the same issue as the ones I've tried before it (lack of adhesive around the edges), I'm going to try and go back to using plastic screen protectors.
I don't want to use my device without one, but I also hate how these glass protectors don't fully adhere to the screen around the sides (including top and bottom)
Biuzko tempered glass screen protector from Amazon had been working perfectly for me for many weeks.
Megaflop666 said:
Biuzko tempered glass screen protector from Amazon had been working perfectly for me for many weeks.
Click to expand...
Click to collapse
Can anybody confirm this?
on yt you have a channel big ubox and there one guy test a lot of tempered glasses and cover for OP5 also the Biuzko one.
graja84 said:
on yt you have a channel big ubox and there one guy test a lot of tempered glasses and cover for OP5 also the Biuzko one.
Click to expand...
Click to collapse
The YouTube channel you mention is also my favorite choice for screen protector info for the Oneplus 5. He always tests the protectors with various cases. His branding of the channel can get annoying but his market coverage is excellent and vast. With the plethora of tempered screen protectors its your choice for an accompanying case that often makes a big difference in your satisfaction. Here is the Big unBox - Biuzko review.
One thing I noticed is when the Big unBox applied the Official OnePlus 5 tgsp video it had lots of bubbles on the edges that he said couldn't be removed while I watched XDA's TK review and his application looked perfect with TK giving it a thumbs up. In the comment section of that review TK said all was well even after a month of usage. I was surprised as the Official tgsp has garnered horrible reviews and comments in the XDA Oneplus 5 accessories section. The most consistent criticism of the Official tgsp is that it cuts off a tiny fraction of the screen. In fact, so far my research indicates all of the "Full Adhesive", "Full coverage" tgsp cut off part of the screen. Personally I think the reason they have a black line on the edges is to hide inevitable bubbles due to the curved edge. The thicker the tempered glass the wider the side black stripes (e.g. Orzly versus Official).
Here is the criteria I'm using in selecting a replacement for my Orzly tgsp and cheap bumper case. Note that I've already installed a dBrand skin so that skews my criteria somewhat.
Tempered Glass screen protector:
- Must have full adhesive (not just top/bottom and side adhesion) and full coverage
- Would prefer, but am a tiny bit flexible on, part of the screen being cut off (limit is that not one pixel of the notification bar's clock is trimmed)
- Must have an oleophobic coating
Case:
- Needs to be as non intrusive as possible adding grip but not greatly ruining the sleekness of the phone
- Uses a minimalist design and/or clear materials so as not to obstruct viewing of the dBrand skin I've installed
- With the case on the buttons (power and volume rocker) must not be difficult to press
So far my research has me leaning towards the Official OnePlus 5 or Biuzko tgsp with a Rhinoshield Crashguard case. My one issue is that the Rhinoshield reviews always mention how difficult the volume rocker buttons are to press. Here is the video that has me leaning in that direction as is seems to best address my criteria
OnePlus 5 best case/protector setup
I'll being doing more reading and searching today hoping to find the unicorn of tgsp/case combinations. The dust under my Orzly is driving me mad but the feel and responsiveness of its surface has me rejecting a film/plastic protector alternative.
I'm using the Biuzko as well with the Tudia MERGE case no problems.
The trick is to first put OP5 in the case, THEN place the screen protector on. It fits perfectly, and you can't mess up the alignment since it falls right in. Then I just try to put pressure on the sticky parts for a few minutes.
I've had no problems for 3 weeks now.
I installed mine the same way, but I'm using the op5 carbon fiber case.
Sent from my ONEPLUS A5000 using Tapatalk
The original plastic cover was just perfect, is there is any possibility to find an équivalence ?
There's only tempered glasses on internet
akhage said:
The original plastic cover was just perfect, is there is any possibility to find an équivalence ?
There's only tempered glasses on internet
Click to expand...
Click to collapse
Hello,
I recommend you the plastic screen protectors from GadgetShieldz. I made a review about it on another post on xda but to summarize, it's a bit difficult to apply but then it's great. The screen looks good and it's cheap ^^ highly recommend.
FYI, I was struggling with TGSP for the OP5 and I just gave up. There is no good alternative atm.
TMSxXDA said:
It seems that all currently available on AliExpress (at least) tempered glass protection are flawed, because of:
1- Protectors that covers the body in full, and has some black areas: has actually glue only on the black non-transparent zones, but nothing on display area it self (so only display ages, upper and lower parts has glue), this makes it rubbish, because it will not stick well to the screen, one or two gaming sessions and it will end in recycle bin.
2- Fully transparent one, with full screen coverage: because 1+5 has 2.5D screen, those covers will not stick well on phone edges since tempered glass is rigid, this maybe can be used only with covers that overlap edges of the screen also.
3-Fully transparent one that don't cover all of the screen: those usually stick well, but only if they left about 5mm on each edge uncovered! I believe it is clear that such a gap ruins the protective purpose of the tempered glass, aside the ugly look due to gaps. (Again, having an edge overlapping cover could make it look better)
So it seems the only practical option for now is to use usual non glass protection unfortunately.
If I missed something or you have some suggestions please let me know..Some manufacturers claims that there protector is 4D, what means that it should solve all above issues, i didn't try those yet, anybody tested them?
I am regretting removing original 1+5 protection
Click to expand...
Click to collapse
Thanks for this, I recently just applied it and noticed all the issues you raised.
akhage said:
The original plastic cover was just perfect, is there is any possibility to find an équivalence ?
There's only tempered glasses on internet
Click to expand...
Click to collapse
Skinomi makes a wet application protector in both clear and matte. I posted pics of the matte version here. Since that post, I've experienced no scratches or orange peel effect. It's also great for no fingerprints.
You can always get the Nillkin H+ Pro, but only if you are using a spigen case or otterbox. Right now I am using the Spigen Rugged Armor with Nillkin H+ Pro and the gap between the glass and the case is around 1 mm (i would say 1.5 mm if I have to be more accurate). The Otterbox case is even better but I find it too bulky, tried it once for an hour and I did not enjoy it, but some of you may like it.
Few words about the Nillkin H+ Pro.
I know there are few variants of the Nillkin glass and I have tried all of them in the past. In my opinion the best glass is exactly the H+ Pro even tho it is a 1 dollar more expensive. The glass has zero rainbow effect or halo effect, it is 99 to 100% clear. It has amazing orleophobic coating. My Honor 8 has the same glass for 6 months now and it is flawless. I am going to change my nillkin glass with the official 3D tempered glass but only because I received the rhinoshield bumper. Otherwise I would not change my nillkin. You are going to get used to the small gap in a week or so.
Don't leave the phone without a glass.
I just applied mine, best screen protector I ever had, pure quality. Quote me on that
I love the official OnePlus screen protector, it's premium & looks good. Who ever made this thread is straight up wrong. The one he recommended is no Bueno, the glass part doesn't have enhesive. Look I am a OnePlus 5 conisuer, the screen protector is fantastic ?
I have siegen case. Can I buy the original screen protector from oneplus store with no problems? Or can I suggest me something with dust proof and oil proof ?
Hi!
I just wanted to know which is, in your opinion, the best tempered glass screen protector for this device. So far I've no luck, I bought a 2.5d one that has airbags on the borders.
Opinions?
jandraht said:
Hi!
I just wanted to know which is, in your opinion, the best tempered glass screen protector for this device. So far I've no luck, I bought a 2.5d one that has airbags on the borders.
Opinions?
Click to expand...
Click to collapse
same problem here with Luanke glass (209626001) from g3arb3st, all around on 1-2cm it was like there was no glue at all, only the center part was sticking correctly.
http://s.click.aliexpress.com/e/qjEuBiE
adrenochrome25 said:
same problem here with Luanke glass (209626001) from g3arb3st, all around on 1-2cm it was like there was no glue at all, only the center part was sticking correctly.
Click to expand...
Click to collapse
This is in fact not the problem with the tempered glass. It is due to the curved glass on redmi 4x which is called as 2.5D glass which will be slightly bent at the edges. When a traditional tempered glass is applied to the screen, as the glass is flat at the center, the tempered glass adheres perfectly, while the ends are bent but the tempered glass is not. This is the reason the tempered glass always leaves air gaps at the edges. I would prefer the old school model plastic screen protector that is available on mi.com for our beloved redmi 4x. Just give it a try and you won't even feel like you have a screen protector on the screen. The only intention in this screen protector is to protect the screen from scratches that are likely to appear due to object playing around in the pockets along with the phone. This screenguard will not protect the screen from drops. You will definitely need to rely on your luck about breaking the glass from waist height of an average height guy.
thanks for your reply
i know about the 2.5D (or rounded edges) of the Redmi4x, but in my case the glass manufacturer circumvented to this problem by making protective glasses slightly smaller than the phone glass like 3mm on each border, so beside the increased difficulty to position it, it should have skipped the edges radius. But even with the 3mm skip i still had non sticky parts. (sku 209626001 from gearbest)
Indeed plastic models should minimise this issue but they are so soft ! After one week in the pocket with scratching things like keys they look so bad that they are already good to be replaced. So except if some technological revolution happened for plastic screen protector since the Mi2/S time, i think i'll live without screen protection at all
yyyoel said:
http://s.click.aliexpress.com/e/qjEuBiE
Click to expand...
Click to collapse
This one is excellent too Im still on my first after 5 monthsand still perfect, and its much cheaper
https://www.aliexpress.com/snapshot/0.html?orderId=87954696635076&productId=32832655061
MadMicro said:
This one is excellent too Im still on my first after 5 monthsand still perfect, and its much cheaper
https://www.aliexpress.com/snapshot/0.html?orderId=87954696635076&productId=32832655061
Click to expand...
Click to collapse
Ok thanks
Im using one of that "hybrid" screen protectors, the center is made of tempered glass and the edges made of some durable material, one claims for carbon fibers, the other for Kevlar. sorry i do not have a link for what i bought, but it looks exactly like the one in that link : https://www.aliexpress.com/item/10pcs-lot-For-Xiaomi-Redmi-4X-3D-Carbon-Fiber-Screen-Film-Anti-Scratch-Tempered-Glass-Screen/32821140687.html?spm=2114.search0104.3.29.uQibKQ&ws_ab_test=searchweb0_0,searchweb201602_4_10152_10151_10065_10344_10068_10345_10342_51102_10343_10340_10341_10609_10541_10084_10083_10307_10312_10313_10059_10314_10534_100031_10604_10103_10605_10594_10107_10142,searchweb201603_12,ppcSwitch_5&algo_expid=72b8e48c-88c1-4470-9f38-f193a555b5e0-4&algo_pvid=72b8e48c-88c1-4470-9f38-f193a555b5e0&rmStoreLevelAB=5
it comes with colored edges, gold, black and white so you can use black or gold on white phone and vice versa. because the edges made of flex material, it sits perfect on the screen and have a nice curve edges all round. my have 98% coverage of the original screen, there is a 0.2 mm of gap between the two. in use on my device for about two month's now, having two falls on asphalt from about 70 cm, right on the corner, nothing happens yet. no scratches yet, as i say, i don't have a link for what i bought, i remember it was an unknown Chinese brand. hope it helps.
Why are all of the links aliexpress? (i don't have a problem with it just i prefer ebay/amazon)
DeblaGaming said:
Why are all of the links aliexpress? (i don't have a problem with it just i prefer ebay/amazon)
Click to expand...
Click to collapse
Isn't it the cheapest that way? Just thinking.
Also, about topic - what do You think about 3mk 3D flexible glass for RN4X? Is it worth it? I would love to get as much protection as possible since I basically drowned my previous phone (UMI C Note) in worktime when I was washing 1 cubic meter containers with the pressure cleaner. Phone was in my pocket all the time, but just small stream of water on fingerprint scanner (inb4 you are a dumbass) ruined everyting.
Nanoedge Full Cover Screen Protector for xiaomi redmi 4x Gold Protective Layer Clear Use Layer TPU Screen Protective Film
https://www.aliexpress.com/item/Nan...260.html?spm=a2g0s.13010208.99999999.6.nfIiZj
buczek0711 said:
Isn't it the cheapest that way? Just thinking.
Also, about topic - what do You think about 3mk 3D flexible glass for RN4X? Is it worth it? I would love to get as much protection as possible since I basically drowned my previous phone (UMI C Note) in worktime when I was washing 1 cubic meter containers with the pressure cleaner. Phone was in my pocket all the time, but just small stream of water on fingerprint scanner (inb4 you are a dumbass) ruined everyting.
Click to expand...
Click to collapse
Hi buczek,
have you tried the mentioned above FlexibleGlass? What are your thoughts on it?
there are much different quality of tempered glass in the market. some of tempered glass screen protector is with poor adhesive glue, it's easy to come off. some tempered glass screen protector is easy to be broken. our company supply high quality tempered glass screen protector, it's with high adhesive A/B glue, up to 9H hardness tempered glass material, anti scratch and anti shatter, protect your screen effectively.
more info: weaccessory dot com
Shenzhen Western Electronic Co., ltd
Here in New Delhi I am able to get a variety of glass based screen protectors costing between ₹15-₹50 per piece. Yes they aren't as effective as those super costly ₹800 one 's but still are very good. It's just that they don't come in any fancy packaging and cleansing wipes
use nano glass,its good fit
Can anyone recommend a tempered glass that has not an insane amount of reflection effect? I bought one from a seller on Ali and it is just like a mirror, making it more annoying to use and harder to see in the sun. ali or ebay
tangoviking said:
Can anyone recommend a tempered glass that has not an insane amount of reflection effect? I bought one from a seller on Ali and it is just like a mirror, making it more annoying to use and harder to see in the sun. ali or ebay
Click to expand...
Click to collapse
Seconded.
The same happened to me. Also it gets dirty very easily and make the screen significantly darker.
I use these. They fit perfectly.
https://www.aliexpress.com/item/2pc...tector-film-full-cover-black/32809037642.html
There's no quality screen protectors made from glass available for this model. I already spent like 50$ on them and none of them lasted long and all of them was defective in one or other way. The first one I bought (from Mocolo) with colored edges did come off on it's own after about a week of very light use. Do yourself a favor and listen to my advice... Buy some plastic screen film instead of this cheap crap and save yourself a lot of nerves and money.
Hello there possible saviour of headaches,
I've been browsing around for hours now through fake/legit comments recommending this or that product.
It seems as finding the perfect screen protector for this phone is a hassle, so my question is, of the ones that YOU'VE tried.. which satisfied you the most?
Please post pictures, if you have the energy to do so, on the current state of your screen protector.
Thank you for your time!
Ps. You may claim the title "saviour of headaches" after your contribution.
If you need protector not tempered glass
Buy from official site
I'm using this one https://es.aliexpress.com/item/ZNP-Vidrio-Templado-Para-Xiaomi-Redmi-4-4-Pro-4X4-Redmi-Nota-4-Nota-Pro-4X/32836035031.html?spm=a2g0s.9042311.0.0.XaBkJF
Ri0z said:
Hello there possible saviour of headaches,
I've been browsing around for hours now through fake/legit comments recommending this or that product.
It seems as finding the perfect screen protector for this phone is a hassle, so my question is, of the ones that YOU'VE tried.. which satisfied you the most?
Please post pictures, if you have the energy to do so, on the current state of your screen protector.
Thank you for your time!
Ps. You may claim the title "saviour of headaches" after your contribution.
Click to expand...
Click to collapse
3mk Arc (also 3mk Arc 3D if you need back/sides protection aswell), it's screen protector over whole screen (it's foil not glass, and yes it goes over the edges aswell), perfect fit it's not even noticable and it's not coming off anywhere, 0 bubbles and it has self regenerating coat..
I tried a lot of screen protectors including Aliexpress ones but they are all trash, all of them have some issues (mostly poor fit, or some weird color issues). But with this i'm 100% satisfied, im not looking for glass protector anymore. This is enough for scratch protection, for drop protection i have case..
https://imgur.com/xstGyKH
https://imgur.com/vYZf745
https://imgur.com/pOLey9E
Here you have video with 3mk Arc 3D (for different phone) - https://www.youtube.com/watch?v=2phEqkGAAnQ
This is their official store: https://folie-ochronne.3mk.pl/pl/c/Redmi-Note-4-Global/1369 39,99 zł. is around 10 Euros.
I live in Indonesia. I know one trusted screen protector brand. The brand name is INDOSCREEN.
They have some type of screen protector with price range and technology which you can check on their website.
If this brand available to your country I suggest you choose their top line options. Mask premium series hybrid film model for instance. It's impossible to break, made from PET plastic - glass, absorbs low to medium impact, and delicate to touch, oleophobic coated too.
This black and red packaged product is quite pricey. But no compromise quality and lifetime warranty plus 3 times free changing sure is worth the money.
I think the main reason why we not getting a proper screen protector is because of the curved screen ... I hate that 2.5D glass screen. Life was much simpler with a flat screen.
And thats why you shouldn't use tempered glass on this phone but good quality screen film / foil with full screen coverage. 3mk is really top notch quality but feel free to look for some alternatives, i'm not looking anymore.
I use brotect mate since 1 years, perfect ! Find on ebay
Envoyé de mon Redmi Note 4 en utilisant Tapatalk
Read my posts in the tempered glass thread
My preferred across several devices now is the Nillkin Anti-Glare with Matte finish. It's up to personal preference, but they're the ones I like most. Every new device I migrate to, I purchase 2-4 of these for its lifetime. I like their visual acuity (not as "clear"), touch and feel, ease to clean, and oleophobic effectiveness.
"Nillkin Matte Mi5" will find it on ebay, AliExpress, etc. Check youtube for examples. Like with most plastic film, replace every ~6-12 months depending on your preference.
I´ve been using a no name anti glare foil from Phonenatic and does a good job. Bought on e-bay, a 2 pcs set was €2,40. https://www.ebay.at/itm/371815842272 and also have a 9H glass, this is okay as well. https://www.ebay.at/itm/372136883554
I use this: https://www.gearbest.com/screen-protectors/pp_1284329.html?wid=1433363 and i am very happy with it, it also has all the holes in the right position, so you don't even see and feel that you have it installed
Hi!
I will be receiving my Ultra on Tuesday and was wondering if its for sure that the USA version does NOT have a pre-applied protector.
I am planning to buy one if that is not the case.
Also, for the rear cameras, I normally buy tempered glass protectors. Is it recommended for this phone or do you have other suggestions?
I bought a case that has the sliding part to cover the camera for when I am going out and one with a kickstand for when I am home so maybe I do not need to bother with protecting the cameras?
Any feedback is welcome.
Thanks!
The case needs raised guards on all sides of the display and around the cam protector which is integrated into the rear cover. It's replaceable and not easily scratched if you avoid direct contact with it. Clean with a dry microfiber cloth.
The case is the primary defense.
The display protector is to prevent scratches from sand and grit.
On my Note 10+ I've used the Zizo Bolt case and Gorilla IQ Sheild for over 20 months with no damage in spite of close to a dozen drops onto concrete from 2-4 feet, including corner hits, face plants and end over end multiple impacts.
It works.
Many cases claim to be mil spec but are not. Worse the mil spec they cite is a drop onto plywood covered concrete. Not even directly onto concrete. Concrete doesn't normally have
plywood covering it in the real world
That mil standard is meant to test for drops inside military transports. Good if your an airman who spends most of your time in the air.
shaolin95 said:
Hi!
I will be receiving my Ultra on Tuesday and was wondering if its for sure that the USA version does NOT have a pre-applied protector.
I am planning to buy one if that is not the case.
Also, for the rear cameras, I normally buy tempered glass protectors. Is it recommended for this phone or do you have other suggestions?
I bought a case that has the sliding part to cover the camera for when I am going out and one with a kickstand for when I am home so maybe I do not need to bother with protecting the cameras?
Any feedback is welcome.
Thanks!
Click to expand...
Click to collapse
Yes, I too didn't get any pre-applied protector, so I bought one from Gadgetshieldz and using it for 2 months now. This screen protector looks good and premium but I can't say there are no scratches, minute scratches occurred but they are not bad. You can also try it out, I'll drop the link below.
Mobile Skins & Wraps | Screen Guards | Screen Protectors | Phone Covers | Gadgetshieldz India
Mobile skins & wraps, phone covers, screen guards & body protectors for Phones, Laptops, Tablets, MacBooks. Proudly Made in India. Buy Online. Ships Worldwide.
www.gadgetshieldz.com