Related
First off, hi guys - new HD2 (Leo) owner here and have to say I love it!!
Anyway, thought I'd just say something about this product. It's rubbish...
Poor fit, didn't stick properly and bubbles galore - stay well clear of it IMO
Anyway, will be lingering about as still getting my head about WinMo and the various ROMs about - still running stock 1.48 ROM out the box but it's an awesome phone and definitely glad I got it...
Well my friend, for a first post it's a good point well made. The HTC screen protectors are ****e! I managed to lay mine without bubbles, but at the bottom where it fits over the buttons it keeps lifting up and just doesn't settle properly. It's now starting to get crap underneath it, completely defeating it's intended purpose.
Final verdict... EPIC FAIL!
Oh and Welcome to XDA Developers EddyOS. I'm sure you'll be a flashaholic in no time.
ClownShoes said:
Well my friend, for a first post it's a good point well made. The HTC screen protectors are ****e! I managed to lay mine without bubbles, but at the bottom where it fits over the buttons it keeps lifting up and just doesn't settle properly. It's now starting to get crap underneath it, completely defeating it's intended purpose.
Final verdict... EPIC FAIL!
Oh and Welcome to XDA Developers EddyOS. I'm sure you'll be a flashaholic in no time.
Click to expand...
Click to collapse
Did yours come with a screen protector in the box? I didn't see one in mine but I may have overlooked it, or different packaging in Asia. So tomorrow I'm on a hunt to find one.
I dont recal there being one in mine either. Hmm maybe i should look alittle harder.
Maybe they ordered the original OEM ones from HTC as a side-order!?
I did, and mine are in the mail.
Should arrive tomorrow...
Hope they are not as bad as stated in this post...
Will be sure to comment on it here when I get them
Yeah, bought mine from the HTC Shop - didn't get any in the box...
Ordered mine too... complete waste of money
I got the official ones too, I thought it was me just fitting it badly as it didn't seem to fit the screen and had bubbles. I couldn't get it to sick below the buttons either. It had to come off. I got another one from Amazon and it now fits as I would expect it to.
I would not recommend the official protector from HTC, sorry.
What ones did you get in the end? Might be tempted to get one to be on the safe side but my phone does stay in it's pouch when not in use...
Why would you need to have a screen protector......
If you guys have been hiding under your bed sheets then its time to wake up.
Leo, AKA HD2 had a scratch resistant glass and not a cheap plastic face.
Just have a look at the following link and you will agree....
http://www.youtube.com/watch?v=NcEaehKWr2s
you need guts to do it, but i didnt have the guts to do that.
But atleast the screen protector is not needed.
Of course a screen protector is needed. It may be made of glass, but it's not bullet proof glass!
EddyOS said:
What ones did you get in the end? Might be tempted to get one to be on the safe side but my phone does stay in it's pouch when not in use...
Click to expand...
Click to collapse
http://www.amazon.co.uk/exec/obidos/ASIN/B002Y33M4W/ref=ox_ya_oh_product
This is the one I went for from Amazon. Fits much better than the official HTC one as it sits just slightly within the screen profile rather than exactly the same size. I have a 100% fix now.
But as one of the posts above points out, we shouldn't really need a protector on it because it is scratch resistant, but I go for peace of mind.
GUYS!
Please stay away from HTC screen protector. It is the worst screen protector I have ever had. First of all it is almost impossible to apply correctly, I had 4 and scrapped every single one! (just to say it is not the first device with big screen I tried to apply screen protector and I never had troubles before). Second thing is that it gets very smudgy.... for me complete waste of money.
petexx said:
GUYS!
Please stay away from HTC screen protector. It is the worst screen protector I have ever had. First of all it is almost impossible to apply correctly, I had 4 and scrapped every single one! (just to say it is not the first device with big screen I tried to apply screen protector and I never had troubles before). Second thing is that it gets very smudgy.... for me complete waste of money.
Click to expand...
Click to collapse
Completely aggree with you. I also waste 3 of them. finally a give up!
Not recomended!
My HTC screen-protectors arrived today...
And I have to admit, I didn't really believe the people writing about how bad they were.
But I have to aggree, what a piece of s***!
I got 2 in the pack, and the first one messed up on a biblical level for me.
The second one actually seemed to fit as intended, but I just couldn't get the corner to fit right...
I got away with no bubbles underneath, but the damn corner just couldn't fit.
We're talking a matter of milimeters here...
Stay away from them, like everyone else is saying
I'll join the chorus.
I ordered a pack of 2, and quickly noticed that they're very different from the (actually quite OK) HTC HD protectors.
The adhesive side seems to attract small particles from the air within seconds. Just one such small particle produces an ugly bubble. I don't want to be seen with such bubbles. My wife would call be "Bubble Boy".
Since the adhesive is quite strong, it's impossible to make minute adjustments the moment a part of the protector touches the glass. This is compounded by the exact measurements - even when I thought it fit wonderfully on one end of the screen, the other end collided with the screen bezel, making it a bust.
The protector is also very thin and flexible, so it is almost impossible to hold without bending and getting fingerprints underneath, further ruining its appearance.
This product should be retracted from the market. I completely understand why the HD2 doesn't come bundled with these protectors:
1. they're practically impossible to fit
2. the HD2's glass doesn't really need it
I'll live hard and fast, without protection.
What for?
My HD2 is rocking along very nicely without a screen protector... with this scratch resistant glass, I really didn't see the point.
I avoid putting my phone in the same pocket as my loose change or my keys - but that was a pretty easy adjustment to make.
... Just don't see what I'd want to use a screen protector for other than to take a beautifully slim piece of art look like something it's not.
skippinshanghai said:
My HD2 is rocking along very nicely without a screen protector... with this scratch resistant glass, I really didn't see the point.
I avoid putting my phone in the same pocket as my loose change or my keys - but that was a pretty easy adjustment to make.
... Just don't see what I'd want to use a screen protector for other than to take a beautifully slim piece of art look like something it's not.
Click to expand...
Click to collapse
I don't see how applying a screen protector that's probably less than 0.5mm thick will ruin the look of the device.
Its about personal choice
Screen protector or no screen protector? Condom or no condom? Safety glasses or no safety glasses? Its a matter of choice linked to a a personal assessment of risk, cost and benefit.
I always use one........
WB
fz9999 said:
Of course a screen protector is needed.
Click to expand...
Click to collapse
It's not "needed". It's scratch resistant glass - we have discussed this here before. It's the same type of glass you get with better watches. Do you use them with a protector? If you "want" damage the glass you can do this with force, but then a screen protector wouldn't help neither.
just finished installing my new invisible shield on my HD2. during the process of installing the it, phone did seem to get a bit wet so im going to follow the advice to let it dry out for out 12 to 24 hours before turning it back on. the process of applying the shield is different compared to ones i have bought before. now a small package with a sponge is included and instead of a squeegee a installation card is used which i feel works much better to take out the small bubbles after. the shield fits just right covering the screen and a little extra beyond that. if anything i will update once i have let it dry out a bit and report back on how the screen reacts to the shield being on it and the screen sensitivity to touch.
What version did you buy? I have the Maximum Protection coming in the mail. I am just wondering what the difference between Full body and Maximum Protection is.
Not so good
Hi all,
I bought the IS full body for HD2 and I'm very disappointed! It's called full body but there are just too many open spots. I had my first IS on my I900, and the full body covered everything except the camera lens, volume and camera keys, and the call keys. The HD2 is covered, but I won't call it full body because the Omnia was better covered. Those who installed it know what I'm talking about, for example on the back of the phone, between the cover and both the upper and lower part, you have some space, on the side, where the volume buttons are, the upper part (when you put the phone with the screen up) is not covered, and the half of the bottom, where the 3.5 jack and usb socket are, is not covered. There are other spots, hard to define, and most of all, when after taking all the bubbles away, some liquid is still there and guess what it will turn into when dry? Yeah, bubbles...
I wanted to ask .. does the full Invisible shield of the HD2 ( screen and the back ) better or the just back only ??
I mean does the Invisible shield of the screen will reduce the sensitive of the touch on the screen ??
please because I want to buy it so which one I buy
just back or the both ??
you can only buy
front - for the display
or
full body kit - for the display and 3 cut pieces for the back
yes, the one for the front will reduce the sensitivity compared to without one.
after the installation it sucks, but getting better each day.
after a few days it is ok, also to use swype for instance, without any problems.
so the full body kit is absolutely great, and i never will use a mobile device without such a nice protection.
I just bought one on ebay
Look at item, 180488642102 (can't post links since I rarely reply on the forum)
Installation was a breeze and much quicker than a zagg and in my opinion a cleaner look. My buddy wanted one, but didn't want to use their screen protector, so I asked if they would just sell the pieces for the housing. They said yes and all you have to do is buy the screen protector, item 170466295030 and put in the order notes that you want the housing pieces only. I would send them a note first.
This should save some $$$ and you could get the housing protector for around $6.
forelli said:
Hi all,
I bought the IS full body for HD2 and I'm very disappointed! It's called full body but there are just too many open spots. I had my first IS on my I900, and the full body covered everything except the camera lens, volume and camera keys, and the call keys. The HD2 is covered, but I won't call it full body because the Omnia was better covered. Those who installed it know what I'm talking about, for example on the back of the phone, between the cover and both the upper and lower part, you have some space, on the side, where the volume buttons are, the upper part (when you put the phone with the screen up) is not covered, and the half of the bottom, where the 3.5 jack and usb socket are, is not covered. There are other spots, hard to define, and most of all, when after taking all the bubbles away, some liquid is still there and guess what it will turn into when dry? Yeah, bubbles...
Click to expand...
Click to collapse
I believe that is why they have the New Maximum Protection for the T-mobile HD2. I cant confirm until I receive the one I purchased either Monday or Tuesday. According to the description I thought it said that the maximum protection is supposed to cover virtually everything you would wanna protect and is able to be stretched to cover the extra parts.
I got the phantomskinz the same price as invisible shield, you get 2 of the skins, & comes in matte option!!
spoogedemon said:
you can only buy
front - for the display
or
full body kit - for the display and 3 cut pieces for the back
yes, the one for the front will reduce the sensitivity compared to without one.
after the installation it sucks, but getting better each day.
after a few days it is ok, also to use swype for instance, without any problems.
so the full body kit is absolutely great, and i never will use a mobile device without such a nice protection.
Click to expand...
Click to collapse
thank you
so you advise me to buy it better than the normal Protector like in amazon (Premium Crystal Clear LCD Screen Protector for HTC HD2 ) and it is 5 Pack and 5$ ... but the Invisible shield HD2 24$
Go to zagg.com and see the difference between the two.. The invisibleshield material is stuff that they use on helicopter blades. You cannot scratch it... The cheap stuff on ebay will easily be scuffed and eventually tear..
I've seen some reviews on Zagg's stuff and the screen protector is usually too thick and 'grips' your finger as you try to slide on the screen. Don't know if that's still the case but I went with Bodyguardz again since it was decent on my TP2.
don't buy the t-mobile screen protector it takes away from the clarity of the screen and the sensitivity
dtfast1 said:
don't buy the t-mobile screen protector it takes away from the clarity of the screen and the sensitivity
Click to expand...
Click to collapse
I bought them when i picked up my HD2 on release day just until i get the invisible shield on it. It does make the phones screen a bit hazy but itll do until the get proper protection.
Meanwhile, I was browsing zagg's website and came across 3 different coverage options for the invisible shield. I'll be ordering the Maximum Protection package after i type this post!!!
http://www.zagg.com/invisibleshield...es-screen-protectors-covers-skins-shields.php
Pic
Is there somebody who can upload a picture of his HD2 with an Invisible shield on it? Especially the corners.
The HD2 screen is already quite scratch resistant, yes?
well been using the invisble shield on my hd2 for the past day or so and i must say, im not sure if its because of the way i applied it or because it just simply made this way but iv have enjoyed having it on. i dont see absoulutly any hazyness as mentioned before, on my screen. the screen still work great just barely have to touch the screen for it to register my touch. yes u can feel the shield on but, depending on wether u have ur fingers clean or dirty does it make a diffrence when ur using it and how it feels when sliding ur fingers on the screen. also i have noticed i clean the screen less often from dirt and the oil from ur hands, so u get to see less finger smudges on the screen to. also ever since i have the protection on i handle the phone a little more loosely and freely when pulling it out of my pocket. one more thing. for those who have a tmobile hd2 which i do. if u have noticed when u look at the screen mostly during the day in sunlight u can see just barely small dots and lines arranged all over the screen. i can tell they were made to be on the screen because there arranged in a specific order kinda like to register commands and i have noticed that i can just barely see them now with the shield on. makes the screen a lil clearer. i would highly recommended it. this isnt my first device i have applyed the shield on but it certanitly is the device i have been most satisfied with it being on because of its look feel and protection. hope this helps u guys decided on wether to get it or not. also as a last note i only have the screen cover on so i cant comment on the full protection or apparently the new "maximum coverage" shield
kcab87 said:
I bought them when i picked up my HD2 on release day just until i get the invisible shield on it. It does make the phones screen a bit hazy but itll do until the get proper protection.
Meanwhile, I was browsing zagg's website and came across 3 different coverage options for the invisible shield. I'll be ordering the Maximum Protection package after i type this post!!!
http://www.zagg.com/invisibleshield...es-screen-protectors-covers-skins-shields.php
Click to expand...
Click to collapse
I ordered my Maximum Protection on Wednesday and I am hoping to get it on Monday or Tuesday (and I paid for 2 day Air), I am going to most likely only apply the body pieces and not use the screen protection itself since the glass is really durable if you look at this http://www.youtube.com/watch?v=NcEaehKWr2s and I love the sensitivity of my screen and I know on my Mom's Pre and now her Droid eris as well as my brothers Droid eris, the screen is far from as sensitive once you apply the invisible shield. I will however stick with the product because I love there protection and how it gives you a tacky feeling that make me feel allot more secure with my phone in hand. I will also be taking some pictures and possible a quick video of the Invisible Shield on my device after it is applied (I am still debating if I want to pay Best Buy $7 to apply it for me lol)
This shield is perfect!
Hi,
My husband and I use the invisible shield from ZAGG. And not the full body, because it isn't really full. We have to protect and to see from the outside whos device it is. Skins from ZAGG... this is great. Easy to stick it on and it stays perfectly on. No sticky edges or something. I post some photos in this reply. The skins from ZAGG are perfect...
And we can separate the devices and won't take the wrong device to our work. (at 7.00a.m.)
The invisibleSHIELD is easy installed, but you need a lot of patience and a soft piece of fabric (don't know the right word! Doekje in dutch )
And keep your fingers wet! (oops! 1 picture of our cats!!! ) The pictures are made by the HTC HD2 (european version)
alvinmathew88 said:
I got the phantomskinz the same price as invisible shield, you get 2 of the skins, & comes in matte option!!
Click to expand...
Click to collapse
+1 for phantomskinz...I have been using them for awhile on all of my phones.
I have tried zagg and BSE as well and I think the phantomskinz have the least amount of "orange peel" effect and I have noticed zero reduced sensitivity from having it on there.
If you check around on sites like www.retailmenot.com...you can usually find some good coupon codes to save even more money.
...still trying to figure out why they give you two complete sets...not that im complaining, but I upgrade so often...I have never used the 2nd skin for any of the phones I have
On the package, they recommend dipping the skin in a bowl of warm soapy water to apply...I have always had better results using a small spray bottle with the warm soapy water to spray the skin, and using a small bowl to just dip my fingers in.
As an application tip...I have learned that applying them in the bathroom after someone has taken a shower dramatically reduced the chance of airborn dust settling on the phone while you are applying them...just remember to use warm soapy water, keep your fingers nice and wet, lots of clean paper towels or a lint free cloth, and a spare phone to use while drying.
Also...the edges that you have to fold over can be tricky to get down if the skin is still wet. After you get the large flat areas secured down...use a hair dryer and blow dry the adhesive side of the skin to dry it out a bit. the heat also makes the skin much more flexable and easier to shape to the contours of the phone.
Cheers
I have used the 'full-body' protection Invisible Shield, and must say that I am not very pleased with it. The salesperson asked for about 40% of the price to help me apply it. And I figured I could do a job as well as some aunty, and so I did !
And found myself looking at Not-So-Invisible-Shield. There're 3 specks of dust that wouldn't come out even after I unpeeled it and used the sponge provided to scrub it. ANYWAY, the IS doesn't seem to change the sensitivity of the screen much, but it certainly does increase the friction, so swpye-ing might feel a little odd. But I am overall pleased with the product and protection.
Hi all,
Fitted my Flex HD protector (front and rear, pics below)... Rear fits great height-wise, but a bit short width-wise, not bad in general though... Quite good at applying these protectors and I got it without a single bubble
Front one though was a different story... It was my first ever wet-protector install and I'm not entirely sure about it. The fit is GREAT! Just not sure how well my actual application has gone...
Anyone installed this specific protector on this phone and able to offer any advice on whether the bubbles shown will work themselves out over a few days as it says they should? Doesn't seem to be any dust below, just bubbles
Thanks!
They'll go away. It took mine two days to disappear. the first day I saw a few and tried to move them out and by the second night I couldn't see any bubbles.
you can always take it off and re-install. The pray that comes with it does not work as well as a small bowl of water with a drop of dischwashing soap. Make sure your fingers are good and wet and they with some practice you should be able to get much less bubbles right away. I am a perfectionist and it took me 4 applications to get it perfect. I had zero bubbles as soon as I was done and it took about 1 day for the excess moisture to dry for a perfect application. No hair, dust or bubbles. Surpirsingingly, I really like how this SP feels on the phone, and I always have used tempered glass.
The good thing about a wet application is that you get second chances, unlike glass (at least i my experience)
good luck
Mine looked the same as your's OP, by the end of the night most of the small bubbles were gone. Really hoping the rest of them work themselves out over the next few days. Most comments I've read say they do, so I'm optimistic as I am a perfectionist as well. Can't stand the sight of bubbles or blemishes in my screen protector.
DrkGhst87 said:
Mine looked the same as your's OP…
Click to expand...
Click to collapse
I see the orange peel effect and i have ordered this screen protector does the effect go away over time? is it a matter of stretching as much as possible during application with the card?
Thanks all
It seems that after about 12 hours it is looking a lot better, not quite perfect yet though
I also see now there are a couple of bits of dust (I made the mistake of putting it back down on the sheet after taking it off initially to clean the screen again)... Surprisingly though the bits with the dust aren't the worst bubbles, in fact they're not very visible at all
Will give it a few more days then maybe post some more pics for people to see what it is like
It took mine about a week for all the bubbles to work themselves out, but now that the did I can't even tell I have a screen protector on my phone. Really happy with the front protector!
I'm gonna have to redo it as it has dust from when I put it down
But yes the bubbles in general surprisingly are sorting themselves out
Anyone think their screen looks slightly yellowish hue after installing this? I don't recall how mine looked before so I'm really hoping this is so and it's not my actual screen. If it's my screen then I will be exchanging if because it's quite irritating. And it's perfectly white when I hold the screen at an angle instead of dead on.
Sent from my SAMSUNG-SM-G925A using Tapatalk
This is smooth to touch,right?
beda_boy said:
This is smooth to touch,right?
Click to expand...
Click to collapse
Yes
Sent from my SAMSUNG-SM-G925A using Tapatalk
---------- Post added at 12:16 PM ---------- Previous post was at 11:49 AM ----------
So anyone notice the screen looking yellow after installing this?
I would simply take mine off and determine that way but then I would have no protection afterwords. So any help would be greatly appreciated.
Sent from my SAMSUNG-SM-G925A using Tapatalk
does that screen protector cover the curves???
oneandroidnut said:
does that screen protector cover the curves???
Click to expand...
Click to collapse
Yes. Covers the entire face of the phone.
Sent from my SAMSUNG-SM-G925A using Tapatalk
Pure+ said:
Yes. Covers the entire face of the phone.
Sent from my SAMSUNG-SM-G925A using Tapatalk
Click to expand...
Click to collapse
interesting i may have to grab one if i get an edge
Kur0ya said:
I see the orange peel effect and i have ordered this screen protector does the effect go away over time? is it a matter of stretching as much as possible during application with the card?
Click to expand...
Click to collapse
After 2 days, all blemishes and bubbles are gone. I've had several people say they had no idea there was even a screen protector on until I told them. It feels like glass and doesn't have that rubbery feel to it like how some other "wet" application screen protectors feel. I also don't have any discoloration due to the screen protector either. I can honestly say I love how it looks.
I was very skeptical at first since this was my first "wet" application screen protector. I've always used the one and done "dry" application ones. The application process was very nerve racking with all that "solution" on my phone, and trust me I was with everyone else with how my phone looked initially. But after letting it settle for a few days, I can say I'm glad I went with this screen protector that wraps from edge to edge versus going with one that only covered the top of the screen. I highly recommend it to anyone on the fence :good:
Kur0ya said:
I see the orange peel effect and i have ordered this screen protector does the effect go away over time? is it a matter of stretching as much as possible during application with the card?
Click to expand...
Click to collapse
YMMV, some people here claim it goes away but I frankly don't believe them. The orange peel effect is there and in full force even after a week. There's even a bubble that will not go away even though there is no dust underneath. I'm returning this one ASAP and I recommend against anyone buying it.
DrkGhst87 said:
After 2 days, all blemishes and bubbles are gone. I've had several people say they had no idea there was even a screen protector on until I told them. It feels like glass and doesn't have that rubbery feel to it like how some other "wet" application screen protectors feel. I also don't have any discoloration due to the screen protector either. I can honestly say I love how it looks.
Click to expand...
Click to collapse
is it possible you can take multiple front and back photos please?
ThugEsquire said:
YMMV, some people here claim it goes away but I frankly don't believe them. The orange peel effect is there and in full force even after a week. There's even a bubble that will not go away even though there is no dust underneath. I'm returning this one ASAP and I recommend against anyone buying it.
Click to expand...
Click to collapse
yeah.. I like the bubbles happen when lack of liquid and the card isnt used properly and will not come out.
where did you purchase? thoughts on skinomi full protection incl sides?
azibux1 said:
Hi all,
Fitted my Flex HD protector (front and rear, pics below)... Rear fits great height-wise, but a bit short width-wise, not bad in general though... Quite good at applying these protectors and I got it without a single bubble
Front one though was a different story... It was my first ever wet-protector install and I'm not entirely sure about it. The fit is GREAT! Just not sure how well my actual application has gone...
Anyone installed this specific protector on this phone and able to offer any advice on whether the bubbles shown will work themselves out over a few days as it says they should? Doesn't seem to be any dust below, just bubbles
Thanks!
Click to expand...
Click to collapse
I don't think this is brilliant. Those "bubbles" don't look like they'll disappear. Looks like a defective screen protector. Did these ever go away? Wonder if others had the same problem and it is a result of a faulty batch
Kur0ya said:
is it possible you can take multiple front and back photos please?
Click to expand...
Click to collapse
Here's my phone with the FlexHD on after 3 days
And I thought I did a good job. You sir are a master at installing liquid install protectors. If I were to place my phone next to yours it would look like ****, although I did install mine in the car, outside of best buy, on my lap, on a rainy day with no light, because I didn't dare put the phone in my phone or any where else for the drive home.
Oh well, good thing it came with 2 protectors. Can always try again.
I am a Best Buy employee so should be no issue with getting an exchange. Looks like we have one of the 64GB AT&T ones in stock. Gonna be there bright and early to get mine exchanged.
I would advise everyone to keep an eye out.. I actually didn't notice it this morning. Around 6pm I noticed a black part on the screen and thought it was a glitch, so restarted but it was still there.
The line on the right side is just my temporary screen protector film. LOL. I bought an Invisishield and will install it on my replacement device tomorrow.
deepen915 said:
I am a Best Buy employee so should be no issue with getting an exchange. Looks like we have one of the 64GB AT&T ones in stock. Gonna be there bright and early to get mine exchanged.
I would advise everyone to keep an eye out.. I actually didn't notice it this morning. Around 6pm I noticed a black part on the screen and thought it was a glitch, so restarted but it was still there.
The line on the right side is just my temporary screen protector film. LOL. I bought an Invisishield and will install it on my replacement device tomorrow.
Click to expand...
Click to collapse
That's not a single deal pixel.
done12many2 said:
That's not a single deal pixel.
Click to expand...
Click to collapse
All good now.. got my replacement.
Also have installed a Invisible Shield.. After this picture was taken.
deepen915 said:
All good now.. got my replacement.
Also have installed a Invisible Shield.. After this picture was taken.
Click to expand...
Click to collapse
Did you go with the regular or HD InvisibleShield? I'm not a big fan of their new alcohol swab method for activating the adhesive on the HD model. I ended up using left over spray from several previous InvisibleShield installs.
When I used the alcohol swab provided, it just left lint embedded in he adhesive and I ended up with a bunch between the glass and the screen protector. I saw it before I even began to squeegee, so I broke out the spray and went old school. Turned out perfect after that.
InvisibleShield really screwed up this new application method because it leaves no room for error.
done12many2 said:
Did you go with the regular or HD InvisibleShield? I'm not a big fan of their new alcohol swab method for activating the adhesive on the HD model. I ended up using left over spray from several previous InvisibleShield installs.
When I used the alcohol swab provided, it just left lint embedded in he adhesive and I ended up with a bunch between the glass and the screen protector. I saw it before I even began to squeegee, so I broke out the spray and went old school. Turned out perfect after that.
InvisibleShield really screwed up this new application method because it leaves no room for error.
Click to expand...
Click to collapse
I did get the HD model. Yeah the swab was horrible. Mine had issues it has some lint on the bottom right corner. Screen is fully visible but slightly cloudy. Good thing I only paid $5 as an employee lol. I'll just buy another.
deepen915 said:
All good now.. got my replacement.
Also have installed a Invisible Shield.. After this picture was taken.
Click to expand...
Click to collapse
Actually, your InvisibleShield screen protector doesn't look anything like mine. Mine covers completely to through the curved edges. Is your protector for a different device?
deepen915 said:
I did get the HD model. Yeah the swab was horrible. Mine had issues it has some lint on the bottom right corner. Screen is fully visible but slightly cloudy. Good thing I only paid $5 as an employee lol. I'll just buy another.
Click to expand...
Click to collapse
Yeah, thanks for affirming that. I'm pretty sure they did the whole thing as a huge cost saving measure. It damn sure wasn't an improved method to install.
If you compare the savings between the difference in cost for the little plastic liquid spray canisters they provided and the supposed new and improved cheap alcohol swabs, Zagg just made out like a bandit.
Their packaging and marketing keeps getting better and better, but their quality and service keeps getting worse and worse.
done12many2 said:
Actually, your InvisibleShield screen protector doesn't look anything like mine. Mine covers completely to through the curved edges. Is your protector for a different device?
Click to expand...
Click to collapse
No this pic is yesterday morning and is not an invisible shield lol I said I installed after I took the pic. Installed it last night and looks just like yours. How did u do it so perfectly? I think I messed up by not using the squeegee in one motion. I did sections and I think it dried as I was doing it. I have some cloudiness and lint on the bottom. I'll have to get a new one.
deepen915 said:
No this pic is yesterday morning and is not an invisible shield lol I said I installed after I took the pic. Installed it last night and looks just like yours. How did u do it so perfectly? I think I messed up by not using the squeegee in one motion. I did sections and I think it dried as I was doing it. I have some cloudiness and lint on the bottom. I'll have to get a new one.
Click to expand...
Click to collapse
I knew as soon as I saw that piece of crap alcohol swap that the new method was flawed. ZAGG has lost their damn minds!!
The whole point behind getting these types of screen protectors on right is to get them and your fingers sprayed down really good. Once both are pretty much soaking, I pinch the protector between my finger and slide off excess fluid which in turn takes the lint/dust with it. Then I spray just a bit more on and apply it. I get it aligned and squeegee. While you are squeegeeing (is that a word?) and you come across a bubble that isn't going away, it isn't a bubble. It's lint/dust. Simply lift the protector at the edge and spray or apply some additional soapy water with your sprayer or fingers and get it out of there. Carefully fold the screen protector back so as to not allow additional lint/dust to get under there while you were dealing with the last one.
I don't try to use the squeegee to get every bubble. I just get most of the water out. Once 90% of it's gone, I work the edges with my fingers and around things like home buttons and camera lenses and sensors.
I guess my point is, even though their new instructions call for the use of the new alcohol swap, the old soapy water trick works perfectly fine. Actually, better.
done12many2 said:
I knew as soon as I saw that piece of crap alcohol swap that the new method was flawed. ZAGG has lost their damn minds!!
The whole point behind getting these types of screen protectors on right is to get them and your fingers sprayed down really good. Once both are pretty much soaking, I pinch the protector between my finger and slide off excess fluid which in turn takes the lint/dust with it. Then I spray just a bit more on and apply it. I get it aligned and squeegee. While you are squeegeeing (is that a word?) and you come across a bubble that isn't going away, it isn't a bubble. It's lint/dust. Simply lift the protector at the edge and spray or apply some additional soapy water with your sprayer or fingers and get it out of there. Carefully fold the screen protector back so as to not allow additional lint/dust to get under there while you were dealing with the last one.
I don't try to use the squeegee to get every bubble. I just get most of the water out. Once 90% of it's gone, I work the edges with my fingers and around things like home buttons and camera lenses and sensors.
I guess my point is, even though their new instructions call for the use of the new alcohol swap, the old soapy water trick works perfectly fine. Actually, better.
Click to expand...
Click to collapse
Alright so I'll buy another one tonight and see if that works. Good advice, thanks.
Here is what mine looks like.
deepen915 said:
Alright so I'll buy another one tonight and see if that works. Good advice, thanks.
Here is what mine looks like.
Click to expand...
Click to collapse
Looks pretty good to me. If your trying to get it closer to the edge, all I did was continue to work mine while it was still wet. Just a little at a time while I was working the water out from the center of the screen towards the edge.
Good luck man. Like I said, I think it looks great as it is now.
done12many2 said:
Looks pretty good to me. If your trying to get it closer to the edge, all I did was continue to work mine while it was still wet. Just a little at a time while I was working the water out from the center of the screen towards the edge.
Good luck man. Like I said, I think it looks great as it is now.
Click to expand...
Click to collapse
Got another one and did it again. Lint is gone now but got some micro bubbles. Let's see if it goes away. Not noticeable when screen is on.
Also even with no Zagg. I noticed some screen blemishes. Like it seems cloudy in some parts. I put brightness all the way while I was wiping it down to prepare the Zagg install. It's very noticeable. I may need to get my phone replaced again smh.
That completely sucks to hear about the cloudiness issue. I haven't heard of that one yet. I've heard of the swirls, scratches, and whites appearing yellow issues, but not the cloudiness.
I would lose my mind if I had to take a phone back twice for a screen related issue. It's probably not as big of a deal for you since you can do it while you're at work so to speak, but when your spending a grand on a phone, you just don't expect to have to take it back two times to be replaced.
Switching gears back to the bubbles in the Zagg. If you turn the screen on and they are barely noticeable, but with a slight prism light effect to them, you're fine. They'll dry up and be gone in hours.
If however you turn the screen on and see a shadow, it won't be going away when it's dried.
done12many2 said:
That completely sucks to hear about the cloudiness issue. I haven't heard of that one yet. I've heard of the swirls, scratches, and whites appearing yellow issues, but not the cloudiness.
I would lose my mind if I had to take a phone back twice for a screen related issue. It's probably not as big of a deal for you since you can do it while you're at work so to speak, but when your spending a grand on a phone, you just don't expect to have to take it back two times to be replaced.
Switching gears back to the bubbles in the Zagg. If you turn the screen on and they are barely noticeable, but with a slight prism light effect to them, you're fine. They'll dry up and be gone in hours.
If however you turn the screen on and see a shadow, it won't be going away when it's dried.
Click to expand...
Click to collapse
Yeah the Zagg is good enough for me.
And yeah I can see the cloudiness when scrolling on a white page in Chrome. I really don't want to have to exchange it again but may have to if it is really annoying me over the nextra few days.
It's like gray smudges going diagonally on the glass. I can't tell if its on the actual amoled panel or glass.
i have dead pixel on my Galaxy S6 Edge Plus
got the dead pixel after 4 Months using the phone.
how did i get a dead pixel??? i don't understand.
https://www.youtube.com/watch?v=_JbgaYIfdZo
seem's very small
do you think i should repair the phone?
Hi to all,
Wanted to ask if someone has this case.
https://www.punkcase.com/collection...water-shock-dirt-snow-proof-lifetime-warranty
I ordered it ( 26 July) and still waiting.
How it looks, and if its comfortable to use it daily at office
Thanks
This thing looks amazing, I would also be interested in what it is like in real life. Does anyone have one to give a review?
thedavefitzy said:
This thing looks amazing, I would also be interested in what it is like in real life. Does anyone have one to give a review?
Click to expand...
Click to collapse
using it since last 10 days. experience is superlative. makes the device a bit bulky but solid protection. no scratch guard. the film on the case works flawlessly. best case ever used so far. got it from in.mobile fun.com
I found this one
But would like to hear more, from someone hier
Hier some comments :
vivek 8 said:
using it since last 10 days. experience is superlative. makes the device a bit bulky but solid protection. no scratch guard. the film on the case works flawlessly. best case ever used so far. got it from in.mobile fun.com
Click to expand...
Click to collapse
Thanks for the answer.
Any problem typing? And also i put my phone always front left pocket with jeans. Do you think i can continue do that with that case?
Thanks
Sakisgre said:
Thanks for the answer.
Any problem typing? And also i put my phone always front left pocket with jeans. Do you think i can continue do that with that case?
Thanks
Click to expand...
Click to collapse
no problems typing. very slick. case double thickness of phone. front is thin film. sharp knock on phone by edge of the table will crack the screen. but brilliant piece of engineering. love it.
Hello, I just saw this. I've posted this in one of the other posts. This is my take on the Atomic 2.0::
Just received the Ghostek Atomic 2.0 Case. Even though Screen is not glass does not feel that back. No stickiness like plastic films. But for now just had it on for some hours so can't really say for long run yet.
It is a bit wider like a little over 1/4" more than the UAG case. Which adds to black borders on the front as seen on the pictures. So if you already had trouble using it with one hand, this would cause a bit more trouble.
The thickness is about the same as the UAG case when both are facing screen down.
This case advertises Waterproof but has 2 openings for the speaker grill on top and the home button on bottom. I would expect water could get in through those openings. Screen is dot matrix.
The look of the case for me is nice and does not make it look ugly in my perspective. As because the screen guard as they call it make it look like the screen is showing more than some cases that adds front black plastic borders on top and bottom.
The one thing is you might want to use wireless charging more due to having to open up ports more often if using a usb charger.
Here are some pictures I took. Sorry about quality. The best Camera I have is the GS7 edge. lol.
http://imgur.com/a/osNxm
Right now I'm using it with the TANAAB Screen protector.
I'll post more about it. But first reactions seems to be a good case but would depend on how you would see it and if the 1/4" width bigger than a UAG case would be a drawback or not.
It Seems that Ghostek send several out to Mobilefun or Uviyo in batches but haven't shipped through their main site.
Update:
Update about the openings mentioned above. The waterproof works and does not get inside case if there's nothing that raises the area where the openings are. I had the TANAAB TGSP that doesn't go full length of the phone let water in but when removed and tested no water went in. So waiting to test it with a similar TGSP like GPEL2 that fully extends the the phone and see how that works.
When With TANAAB. Sensitivity didn't change and could provide good protection if needed as the outside screen is just a thin plastic film.
Just wanted to point this out.
s.lanso said:
Hello, I just saw this. I've posted this in one of the other posts. This is my take on the Atomic 2.0::
Just received the Ghostek Atomic 2.0 Case. Even though Screen is not glass does not feel that back. No stickiness like plastic films. But for now just had it on for some hours so can't really say for long run yet.
It is a bit wider like a little over 1/4" more than the UAG case. Which adds to black borders on the front as seen on the pictures. So if you already had trouble using it with one hand, this would cause a bit more trouble.
The thickness is about the same as the UAG case when both are facing screen down.
This case advertises Waterproof but has 2 openings for the speaker grill on top and the home button on bottom. I would expect water could get in through those openings. Screen is dot matrix.
The look of the case for me is nice and does not make it look ugly in my perspective. As because the screen guard as they call it make it look like the screen is showing more than some cases that adds front black plastic borders on top and bottom.
The one thing is you might want to use wireless charging more due to having to open up ports more often if using a usb charger.
Here are some pictures I took. Sorry about quality. The best Camera I have is the GS7 edge. lol.
http://imgur.com/a/osNxm
Right now I'm using it with the TANAAB Screen protector.
I'll post more about it. But first reactions seems to be a good case but would depend on how you would see it and if the 1/4" width bigger than a UAG case would be a drawback or not.
It Seems that Ghostek send several out to Mobilefun or Uviyo in batches but haven't shipped through their main site.
Update:
Update about the openings mentioned above. The waterproof works and does not get inside case if there's nothing that raises the area where the openings are. I had the TANAAB TGSP that doesn't go full length of the phone let water in but when removed and tested no water went in. So waiting to test it with a similar TGSP like GPEL2 that fully extends the the phone and see how that works.
When With TANAAB. Sensitivity didn't change and could provide good protection if needed as the outside screen is just a thin plastic film.
Just wanted to point this out.
Click to expand...
Click to collapse
Sorry but I will have to asked you one more time.... Does this case have any problem with touch response? I mean is working perfectly and doesn't infect touch sensitivity?
tsiglas said:
Sorry but I will have to asked you one more time.... Does this case have any problem with touch response? I mean is working perfectly and doesn't infect touch sensitivity?
Click to expand...
Click to collapse
No problem with sensitivity.
Sent from my SM-G935V using XDA-Developers mobile app
https://smile.amazon.com/s/ref=nb_s...mic+2.0,aps,196&rh=i:aps,k:ghostek+atomic+2.0
not many good reviews on Amazon regarding this brand and case. It does look awesome though.
s.lanso said:
Hello, I just saw this. I've posted this in one of the other posts. This is my take on the Atomic 2.0::
Just received the Ghostek Atomic 2.0 Case. Even though Screen is not glass does not feel that back. No stickiness like plastic films. But for now just had it on for some hours so can't really say for long run yet.
It is a bit wider like a little over 1/4" more than the UAG case. Which adds to black borders on the front as seen on the pictures. So if you already had trouble using it with one hand, this would cause a bit more trouble.
The thickness is about the same as the UAG case when both are facing screen down.
This case advertises Waterproof but has 2 openings for the speaker grill on top and the home button on bottom. I would expect water could get in through those openings. Screen is dot matrix.
The look of the case for me is nice and does not make it look ugly in my perspective. As because the screen guard as they call it make it look like the screen is showing more than some cases that adds front black plastic borders on top and bottom.
The one thing is you might want to use wireless charging more due to having to open up ports more often if using a usb charger.
Here are some pictures I took. Sorry about quality. The best Camera I have is the GS7 edge. lol.
http://imgur.com/a/osNxm
Right now I'm using it with the TANAAB Screen protector.
I'll post more about it. But first reactions seems to be a good case but would depend on how you would see it and if the 1/4" width bigger than a UAG case would be a drawback or not.
It Seems that Ghostek send several out to Mobilefun or Uviyo in batches but haven't shipped through their main site.
Update:
Update about the openings mentioned above. The waterproof works and does not get inside case if there's nothing that raises the area where the openings are. I had the TANAAB TGSP that doesn't go full length of the phone let water in but when removed and tested no water went in. So waiting to test it with a similar TGSP like GPEL2 that fully extends the the phone and see how that works.
When With TANAAB. Sensitivity didn't change and could provide good protection if needed as the outside screen is just a thin plastic film.
Just wanted to point this out.
Click to expand...
Click to collapse
May i ask how long did you wait for it?
I am in Berlin, Germany... And i order it on 26 July.
Thanks
Sakisgre said:
May i ask how long did you wait for it?
I am in Berlin, Germany... And i order it on 26 July.
Thanks
Click to expand...
Click to collapse
Ordered through mobilefun.com and took about 1 week when they had stock available.
Sent from my SM-G935V using XDA-Developers mobile app
Update:
As mentioned sensitivity wasn't a big problem or no problem I've seen.
But because its' a plastic screen I and because of my old TGSP didn't full extend to the end of the phone. I decided to get the Tzunami ProGlass from walmart. Installed it and put the case back on. Which should add extra protection on screen.
Even though responsiveness was good this seem to bump it up a bit more as it sticks more to the plastic and doesn't leave much. Plus you should not have a problem with it breaking as it just sits inside case.
Likely going to put the GPEL2 When I receive it but likely this might be my set up for my phone. The case looks nice and hope this is an improvement from their other cases.
UPDATE: Sensitivity issues as well from others with the ProGlass. So waiting on GPEL2.
2nd update of the case
I forgot to mention, this could be a pro or con depending if you use speaker a lot or not. I do listen at times but most of the times I use bluetooth headphones or speakers so no problem plus sound seems to be extended a bit more.
But the sound from the speaker is somewhat transferred and the back is used to transfer the sound out which would be why they use the type of material for the back. As if you see pictures of it the bottom you won't see a speaker cut out instead it's for the cord. So if you really depend on the sound from the speaker, the sound would be coming from the back of the phone instead of the side. You won't have to worry about covering it with your finger.
It does help when talking to someone on speaker phone, which is an advantage if you sometimes use the speaker phone when on calls at times. Seems to amplify it a bit more but comes from back for music. But haven't seen but haven't tested much on what music could get muffled out due to the way it is done.
Hope this answers or helps some that might wonder about it.
Uodate #2
Seems I forgot I still had the AT TGSP and for now no sensitivity issues at all and not like the Proglass has occurred. Will update if it does but for now this would be my combination of screen protector and case.
Sent from my SM-G935V using XDA-Developers mobile app
s.lanso said:
Update:
As mentioned sensitivity wasn't a big problem or no problem I've seen.
But because its' a plastic screen I and because of my old TGSP didn't full extend to the end of the phone. I decided to get the Tzunami ProGlass from walmart. Installed it and put the case back on. Which should add extra protection on screen.
Even though responsiveness was good this seem to bump it up a bit more as it sticks more to the plastic and doesn't leave much. Plus you should not have a problem with it breaking as it just sits inside case.
Likely going to put the GPEL2 When I receive it but likely this might be my set up for my phone. The case looks nice and hope this is an improvement from their other cases.
UPDATE: Sensitivity issues as well from others with the ProGlass. So waiting on GPEL2.
2nd update of the case
I forgot to mention, this could be a pro or con depending if you use speaker a lot or not. I do listen at times but most of the times I use bluetooth headphones or speakers so no problem plus sound seems to be extended a bit more.
But the sound from the speaker is somewhat transferred and the back is used to transfer the sound out which would be why they use the type of material for the back. As if you see pictures of it the bottom you won't see a speaker cut out instead it's for the cord. So if you really depend on the sound from the speaker, the sound would be coming from the back of the phone instead of the side. You won't have to worry about covering it with your finger.
It does help when talking to someone on speaker phone, which is an advantage if you sometimes use the speaker phone when on calls at times. Seems to amplify it a bit more but comes from back for music. But haven't seen but haven't tested much on what music could get muffled out due to the way it is done.
Hope this answers or helps some that might wonder about it.
Click to expand...
Click to collapse
Thanks a lot for the depth, and the detailed report.
Question : is it so necessary to have a screen protector?
Sakisgre said:
Thanks a lot for the depth, and the detailed report.
Question : is it so necessary to have a screen protector?
Click to expand...
Click to collapse
No it is not really necessary but as others mentioned this is plastic. But I feel that phone is safer if screen is protected by Tempered glass than films or plastic films. As there's no big lip on front and only thing protecting front the the plastic film I just rather be protected than not be.
Sent from my SM-G935V using XDA-Developers mobile app
Hello, Want to update on the case as you read my other post mentioning some openings on the home and earpiece, seems that was a faulty case as was missing films for the waterproofing that it supposed to protect.
Seems my first one was missing the films that go in the earpiece and home button so wasn't fully waterproof but had no sensitivity issues, the next one had high sensitivity issues on the top area where the first one didn't. Ghostek has been nice and quick in sending replacements and honoring their warranties. Right now I have the first one installed until I received the third case. As there is no sensitivity issues.
I did drop the phone from about 4.2 ft high with no damage. The phone fell front side. I do have a tempered Glass installed and no difference with or without on sensitivity. There does not seem to be any damage on the phone or case. The drop was accidental and kind of scary as well when it fell face front. Even though it was on a case. But glad I had the setup I had.
The only drawback I see is that with fingerprints I don't have a problem with the one with no films(1st case) but with the films on(2nd Case) the best way for it to read is putting your finger side ways. Which works all the time when you put your finger sideways but when upwards is a small chance that it would detect or not.
Just received mine today. Spotty fingerprint scanner, the screen has the little dots all over when you shine lights on it or are out in the sun, definitely a loss in touch sensitivity due to the front film not touching the screen unless you press down on it.
Hello friends, my question is, is that possible to call someone while using this case?
dyba83 said:
Hello friends, my question is, is that possible to call someone while using this case?
Click to expand...
Click to collapse
I've had no problems when I have good reception. The only times I have problems is when I have 1x when outside in small areas plus work truck kind of blocks signals.
But regular use with not problems on signal, I haven't had any complaints.