Related
Well, I spent the last week or so having all sorts of creative fun with my new Captivate. Unfortunately, I was having the random shutdown issue, so I decided to remove SRE, SU, etc, using ODIN to restore my phone back to stock and get it exchanged for a new one.
I came home with my new phone today and proceeded to start the customization process all over. Before I did anything serious, I connected my new Captivate to my desktop, to both charge the battery and to sync with outlook using Kies.
With a full battery and my contacts loaded, I moved on the rooting and installing SRE. I then installed a bunch of apps, including ADW, ShopSavvy, and a bunch of games.
I then tried to get on the Market to download a few more apps. I forgot to 'emulate' T-Mobile to get around the AT&T censorship, so I fired up MarketAccess. I got an error message saying that MarketAccess couldn't get SU privs. That made no sense, since the phone was rooted, and SRE installed SuperUser. I downloaded the latest copy of Superuser and installed that. The SU problem was now fixed. (Turns out there was a glitch in the SRE I used. Designgears quickly fixed the zip file, but I was already using the glitchy one.)
Anyway, after loading a slew of apps/games, I plugged the phone back into the desktop to charge the battery some more. I got two error messages, one on the phone, and one on the desktop.
The phone complained that it was not on an 'idle' screen, since ADW was running. Since I had set ADW to be the default launcher, I used TitaniumBackup to temporarily uninstall ADW. (I couldn't figure out how to stop ADW and set TW back to the default.)
The desktop is more or a serious problem. I am now getting an info bubble saying that the USB DEVICE IS NOT RECOGNIZED.
The correct USB drivers are installed. I've used them to ODIN my previous phone back to stock. And they were working fine before I added SRE, ADW, etc.
I've uninstalled and reinstalled the drivers. Didn't help.
I tried USB Debugging, on and off. Didn't help.
I tried the age-old trick of unplugging the desktop and leaving it unplugged for 30 minutes. Didn't help.
So, here are my questions:
1) Does anyone know how to correct the DEVICE NOT RECOGNIZED error?
2) If not, is there anyway for me to restore the phone to stock without USB connectivity?
The phone still functions fine, just no USB. I was able to download the new SRE (with SuperUser fixed) using Dolphin browser. I then used My Files to rename and move the zip file to the root directory, and was able to install it fine. Is this same approach possible to restore to stock?
Thanks in advance...
Uninstall the usb drivers. Not sure what there called when kies installs it
fivebraids said:
Well, I spent the last week or so having all sorts of creative fun with my new Captivate. Unfortunately, I was having the random shutdown issue, so I decided to remove SRE, SU, etc, using ODIN to restore my phone back to stock and get it exchanged for a new one.
I came home with my new phone today and proceeded to start the customization process all over. Before I did anything serious, I connected my new Captivate to my desktop, to both charge the battery and to sync with outlook using Kies.
With a full battery and my contacts loaded, I moved on the rooting and installing SRE. I then installed a bunch of apps, including ADW, ShopSavvy, and a bunch of games.
I then tried to get on the Market to download a few more apps. I forgot to 'emulate' T-Mobile to get around the AT&T censorship, so I fired up MarketAccess. I got an error message saying that MarketAccess couldn't get SU privs. That made no sense, since the phone was rooted, and SRE installed SuperUser. I downloaded the latest copy of Superuser and installed that. The SU problem was now fixed. (Turns out there was a glitch in the SRE I used. Designgears quickly fixed the zip file, but I was already using the glitchy one.)
Anyway, after loading a slew of apps/games, I plugged the phone back into the desktop to charge the battery some more. I got two error messages, one on the phone, and one on the desktop.
The phone complained that it was not on an 'idle' screen, since ADW was running. Since I had set ADW to be the default launcher, I used TitaniumBackup to temporarily uninstall ADW. (I couldn't figure out how to stop ADW and set TW back to the default.)
The desktop is more or a serious problem. I am now getting an info bubble saying that the USB DEVICE IS NOT RECOGNIZED.
The correct USB drivers are installed. I've used them to ODIN my previous phone back to stock. And they were working fine before I added SRE, ADW, etc.
I've uninstalled and reinstalled the drivers. Didn't help.
I tried USB Debugging, on and off. Didn't help.
I tried the age-old trick of unplugging the desktop and leaving it unplugged for 30 minutes. Didn't help.
So, here are my questions:
1) Does anyone know how to correct the DEVICE NOT RECOGNIZED error?
2) If not, is there anyway for me to restore the phone to stock without USB connectivity?
The phone still functions fine, just no USB. I was able to download the new SRE (with SuperUser fixed) using Dolphin browser. I then used My Files to rename and move the zip file to the root directory, and was able to install it fine. Is this same approach possible to restore to stock?
Thanks in advance...
Click to expand...
Click to collapse
I had a similar problem and it turn out that Kies hosed up all my drivers...The only way I got it fix was by totally removing any trace of Kies and then uninstalled all my samsung drivers and usb drivers and then rebooted my pc. Then I reinstalled the samsung drivers and win 7 did the rest...
Well, I haven't uninstalled Kies yet. Although I have uninstalled and reinstalled the drivers from the ODIN thread. No difference.
I even uninstalled the ODIN referred drivers and tried the drivers directly from the Samsung site. Still no difference.
I'll go ahead and try uninstalling Kies and then the ODIN drivers, reinstall the ODIN drivers and see if that helps.
I've also ordered a new cable, since I've read a few threads on other forums where the problem was bad cables. I was going to go to AT&T and get a new cable, but they want $24.99. I just ordered a pair from Amazon at $3.99 each, with free shipping!!
Thanks...off to try ridding myself of Kies...
Well, deleting Kies (and associated drivers) didn't help!
After deleting Kies, I tried both the ODIN referenced drivers, as well as those from the Samsung site. Still not working!
I guess I'll wait on a new cable and see if that helps...
Okay, I think I'm in BIG TROUBLE here!!!
New cables arrived today, but they made no difference at all! Still getting the USB Device Not Recognized message. Doesn't matter if I plug the cable in while the phone is on and select any of the connection options (Kies, Mass Storage, etc.). It gives me the same message when I have Odin running and plug the phone in while holding the volume keys.
To further add to the problem, I tried installing the Odin referenced USB drivers on my wife's laptop which has never seen this phone or Kies. SAME PROBLEM!
I'm thinking there might actually be something wrong with the physical port on the phone. But this highlights my actual problem...
How can I return the phone (for the second time) when this phone has been rooted and is running SRE 1.2.1a ?!?!?
Apparently, there's no way for me to restore this thing to stock without USB.
Any ideas/suggestions?
Relax dude--I just got a captivate a few weeks ago, and have it working on tmobile.
For the drivers, when you plug your phone in, you're getting some errors. I know you uninstalled the drivers, but to double-check, open up device manager and see if there are any ! marks for the phone. Right-click and uninstall the entries. Also, you might try using a different USB port. I can only get my phone to connect using one of the 6 usb ports i've tried. Finally, and I don't know if these are the drivers for Odin, but I downloaded these drivers: SGH-i897_Captivate_USB_Drivers_5_02_0_2
When the phone connects, you might want to go to device manager, find the device(s), righ-click and and select 'update driver'. then, in the driver update window, pick 'manual' or 'let me specify location' and navigate to the unzipped SGH-i897_Captivate_USB_Drivers_5_02_0_2 file. Then, it should work.
Like I said, I have no idea if those are the drivers for odin...but I'm about to find out
I'd like to relax, but I think I'm dealing with a phone with a bad usb port...and since I've rooted, SRE'ed, etc., I won't be able to return it.
Anyway...
The driver you're using is the 'direct from Samsung' version, not the one for Odin.
Regardless, I've been through the exercise you propose...both with the Samsung and Odin drivers. When you attempt to manually install drivers, you need to point the installer to the ".inf" setup information file to use. The Samsung driver has three: SSADADB2.inf, SSADBUS.inf, and SSADMDM2.inf.
I get the following message when trying to use any of these three setup files:
The specified location does not contain information about your hardware.
Oh, and I've tried several different USB ports on the computer...both on my external hub and directly into the back of the machine.
Thanks for the suggestions, but still not working...
I'm really thinking I have a bad port on the phone...especially since trying the connection on my wife's laptop produces the exact same error.
Dam...
Still trying to find a way to restore the phone to stock without a USB connection...
i also have this "DEVICE NOT RECOGNIZED" on my sony x1.
Drivers
I was having trouble using the USB drivers from Samsung the one's you were using SGH-i897_Captivate_USB_Drivers_5_02_0_2. The computer didn't recognize the phone. If you havn't tryed these already give these a try. Well since I am new I can't post the url. Put these words together (forum.xda-developers com archive index.php t-730638)
superdog404 said:
I was having trouble using the USB drivers from Samsung the one's you were using SGH-i897_Captivate_USB_Drivers_5_02_0_2. The computer didn't recognize the phone. If you havn't tryed these already give these a try. Well since I am new I can't post the url. Put these words together (forum.xda-developers com archive index.php t-730638)
Click to expand...
Click to collapse
Not sure different USB drivers would help, but I went to the thread you show and tried to download the 32bit drivers. This is what I get:
{"error": "Invalid access attempt for this token"}
Oh well, thanks anyway.
I'm still thinking that the problem is hardware on the phone. I've tried four different cables, and three different computers. All show same problem of DEVICE NOT RECOGNIZED.
Still trying to figure out how to restore to stock without USB connection for ODIN so I can exchange for a new phone...
What are your USB settings on the device? Do you have debug mode enabled or maybe you've set the device to connect to kies right away which is producing errors on your PC. What versions of windows have you been trying to connect to? This sounds like a windows problem more than anything else.
No modifications, same error
I didn't make any modifications to my new AT&T Captivate, and I too am getting USB Device not recognized under any of the following conditions:
- drivers installed, no Kies
- drivers installed after Kies
- Kies installed after drivers
No response to any USB connection mode (Kies, mass storage, media player, PC INternet).
Only way to exchange files is to physically remove the SD card and plug it into my PC. Windows XP Professional.
By the way, which of the three drivers is the correct one: ssadadb2.inf, ssadbus.inf, or ssadmdm2.inf? Pardon my ignorance as to how this is supposed to work.
mukherji said:
I didn't make any modifications to my new AT&T Captivate, and I too am getting USB Device not recognized under any of the following conditions:
- drivers installed, no Kies
- drivers installed after Kies
- Kies installed after drivers
No response to any USB connection mode (Kies, mass storage, media player, PC INternet).
Only way to exchange files is to physically remove the SD card and plug it into my PC. Windows XP Professional.
By the way, which of the three drivers is the correct one: ssadadb2.inf, ssadbus.inf, or ssadmdm2.inf? Pardon my ignorance as to how this is supposed to work.
Click to expand...
Click to collapse
You should return your phone if it's new if you can't get your computer to recognize it when you have the correct settings and drivers.
Choose, mass storage. I use the drivers from ODIN, I also have to ones from Samsung's site but they are for Windows 7 64bit. Before you plug any Captivate into a PC for the first time you need to first change the settings to USB Mass storage or Kies will attemp to download drivers. Once you get your phone to mass storage windows should find the drivers. I am not sure, I am running Windows 7, I have an old desktop that runs XP, I could plug my phone in and check for you.
FiveBraids
Settings--developement-- check debugging mode, this will allow you to open a command shell. Using SDK and ADB commands.
Download SDK online.
http://developer.android.com/sdk/index.html
Follow the installation instructions. This will allow you to use the command ADB download to get your phone into download mode. Kies screws my drivers so I don't use it.
Rhiannon224 said:
You should return your phone if it's new if you can't get your computer to recognize it when you have the correct settings and drivers.
Choose, mass storage. I use the drivers from ODIN, I also have to ones from Samsung's site but they are for Windows 7 64bit. Before you plug any Captivate into a PC for the first time you need to first change the settings to USB Mass storage or Kies will attemp to download drivers. Once you get your phone to mass storage windows should find the drivers. I am not sure, I am running Windows 7, I have an old desktop that runs XP, I could plug my phone in and check for you.
FiveBraids
Settings--developement-- check debugging mode, this will allow you to open a command shell. Using SDK and ADB commands.
Download SDK online.
http://developer.android.com/sdk/index.html
Follow the installation instructions. This will allow you to use the command ADB download to get your phone into download mode. Kies screws my drivers so I don't use it.
Click to expand...
Click to collapse
The 2 folders I found that have the drivers are /program files/android/, .... and /program files/samsung. Delete these subfolders that have drivers in them.
Download this : http://www.megaupload.com/?d=N4GC49JL and unzip. In the folders inside (i386 and amd) there are uninstallers. Run whichever version is appropriate for you. If you have no drivers or it doesn't say to reboot, the main folder has a setup program. Run that to install the proper drivers. When you plug in to usb, it will now find these drivers.
Also, for me, ONLY the REAR usb ports work properly with this. Top, front, and ext hub ALL give issues.....
JayPhill89 said:
What are your USB settings on the device? Do you have debug mode enabled or maybe you've set the device to connect to kies right away which is producing errors on your PC. What versions of windows have you been trying to connect to? This sounds like a windows problem more than anything else.
Click to expand...
Click to collapse
USB is set to Ask on connection
Debug off or on makes no difference
All tests have been done on XP machines (3 different ones)
I'm all but positive this is hardware...
Thanks for trying to help!
Rhiannon224 said:
<snip>
FiveBraids
Settings--developement-- check debugging mode, this will allow you to open a command shell. Using SDK and ADB commands.
Download SDK online.
http://developer.android.com/sdk/index.html
Follow the installation instructions. This will allow you to use the command ADB download to get your phone into download mode. Kies screws my drivers so I don't use it.
Click to expand...
Click to collapse
I haven't tried ADB, but I'm not understanding how ADB would be able to connect when the connection to the computer is failing at the driver level. I guess I can give it a try tomorrow.
Thanks for trying to help!
What would REALLY help me is for someone to post a backup taken of a completely stock (ODIN'ed) phone using ROM manager. I'm thinking I could load that on the phone and then be able to return it for a new phone!
Any volunteers...please?
techmik67 said:
The 2 folders I found that have the drivers are /program files/android/, .... and /program files/samsung. Delete these subfolders that have drivers in them.
Download this : http://www.megaupload.com/?d=N4GC49JL and unzip. In the folders inside (i386 and amd) there are uninstallers. Run whichever version is appropriate for you. If you have no drivers or it doesn't say to reboot, the main folder has a setup program. Run that to install the proper drivers. When you plug in to usb, it will now find these drivers.
Also, for me, ONLY the REAR usb ports work properly with this. Top, front, and ext hub ALL give issues.....
Click to expand...
Click to collapse
Big thanks!
Just got my first Android device a couple hours ago (went from ATT Bold to Captivate), and could not get the phone to mount to my PC.... followed your instructions here and BAM! Perfect-o! I have now rooted....
OK, not sure where to go next... was thinking about just getting a new ROM flashed since I am totally stock at this point.... the fun begins!!!
jaxf250 said:
Big thanks!
Just got my first Android device a couple hours ago (went from ATT Bold to Captivate), and could not get the phone to mount to my PC.... followed your instructions here and BAM! Perfect-o! I have now rooted....
OK, not sure where to go next... was thinking about just getting a new ROM flashed since I am totally stock at this point.... the fun begins!!!
Click to expand...
Click to collapse
Great!! Glad it all worked for you. My next advice is, before adding anything READ A LOT!!! =) Decide what you want from the descriptions and issues you will see in the threads....
Happy modding!!
I didn't see, I just skimmed through bit did you try to put the phone in download mode and see if windows sees that (different drivers come in to play in download mode and none of the touch wiz stuff is running)? it would test the idea of a bad port.
then you can still always install linux and use adw from there, linux and macs don't need drivers. if that doesn't work, put insurance on the phone if you haven't already then drop it in the sink and get another one.
also I think although I don't know but I think adw may have something to do with it. and incorrectly uninstalling it. first put the phone in download mode then you can work from there on ways to fix that.
Sent from my SAMSUNG-SGH-I897 using Tapatalk
Ok, I've given up trying to get this to work. I'm 100% convinced this is a hardware problem with the phone!
I had another thread going, looking for a way to restore this phone (remove SRE, SU, etc.) without usb/ODIN so I could return it to AT&T. I've figured out how to restore it to stock and will be heading to AT&T in the morning.
Thanks to everyone for their patience and assistance!
Hi everyone,
I have an AT&T Captivate SGH-i897 (2nd hand) and i can't mount the phone to my laptop (winXP 32bit). When i plug in the cable to the phone and then the PC i get the "device not recognized".I've donwloaded the Samsung drivers from the xda wiki page and extracted them and tried to update the driveres via Device Mng ,but didn't work.Also dl'ed the Samsung drivers 5.0.x instaled ,and still nothing.USB Debugging is on...
So to recap,my top can't recognize the phone('s internal sd card) so plz help ???????
Try this, go into usb settings and choose "mass storage"
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
install kies
I would also recommend trying to fully uninstall all the drivers that associated on your pc with your phone (samsung or otherwise), and then reinstall the drivers before you plug in your phone. Then try to reconnect.
Just covering the basics. Assuming your phone is working correctly.
You have tried multiple USB ports on your computer, particularly those on the back if it's a desktop.
You have installed correct drivers (x86 or x64)
" for the correct operating system.
You have uninstalled the drivers before trying to reinstall.
You've tried to get Windows/ Mac to find them online (assuming you're using versions of OS that support doing that)
You've first tried Kies mini before full version, uninstalling in between. (Kies full version isn't supported for US, there are workarounds, but that's a different discussion)
On the phone you tell the phone to connect 'USB storage' (from the pull down menu after connected or in the settings)
I too am having problems with USB connectivity on a notebook with Win7/64. The usual failure mode is Windows not recognizing the USB device. I have followed ZBigT's basics, step by step and still cannot connect.
FWIW, my registry is awash with Samsung entries, some of which cannot be deleted.
I've even tried the AIO Toolbox application (to install the 64 bit drivers) to no avail.
Any other tips?
Is usb debugging turned off?
o hey guys sry for keeping u waiting,
i menaged to install ginger ,
the problem was my lap....rusty old bucket!!!!
had my friend come over with his lap and it worked like a charm ,
the problem is now i need a new one ;(,
damn
mrhaley30705 said:
Is usb debugging turned off?
Click to expand...
Click to collapse
Yes. Still no love. Have tried:
usb_drivers_GalaxyS_x64
SGH-i897_Captivate_USB_Drivers_5_02_0_2
mini-KIES
Kies
AIO
uninstalling reinstalling each time
When I plug in the Captivate, any of 3 USB ports on the laptop, Windows gives the "Unrecognized Device..." message.
Go to settings/about phone. Look at the very bottom to see what rom you are running.
mrhaley30705 said:
Go to settings/about phone. Look at the very bottom to see what rom you are running.
Click to expand...
Click to collapse
Paragon RC6.0
FWIW, I also have a Win7/64 desktop with the usb_drivers_GalaxyS_x64 installed and that works fine; can connect see "drives", use ODIN, adb commands etc.
It just the notebook, which I would like to be able to use to connect, especially when I travel, which has issues.
mabovalu said:
Paragon RC6.0
FWIW, I also have a Win7/64 desktop with the usb_drivers_GalaxyS_x64 installed and that works fine; can connect see "drives", use ODIN, adb commands etc.
It just the notebook, which I would like to be able to use to connect, especially when I travel, which has issues.
Click to expand...
Click to collapse
Check in program files for a Samsung folder. There may be remnants from old drivers that need to be manually deleted.
mrhaley30705 said:
Check in program files for a Samsung folder. There may be remnants from old drivers that need to be manually deleted.
Click to expand...
Click to collapse
Thanks for sticking with this. I was able to connect. I as focused on the Registry remnants, but your advice to clear out the Samsung folder in Programs worked. Thank you.
Additional comments: I am now running the Dlev ROM, it's OK, but when I plugged in the USB cable, just to the phone, it launched the Alarm Clock app! So I deleted that.
Then on the first of my four USB ports I got a USB driver failure to install, then the Windows Unrecognized USB device on ports 2 & 3. On port 4 it worked. (This is a Lennovo/Thinkpad notebook.)
I used the usb_drivers_GalaxyS_x64 package as that also worked on my desktop.
Thank you very much.
Hi everybody,
I have a 64-bit PC with Windows 7 Ultimate Service Pack 1 and a Samsung Galaxy S Advance GT-I9070 with Android 4.1.2.
I can't install a driver in order to make Windows recognize correctly the phone when I connect it via USB cable.
I've installed and uninstalled Samsung Kies many times with no results. I've also tried some Samsung driver from Windows Update with no success...
When I connect the phone, it is recognized as a MTP Device and the driver installation starts, but always ends with an error, as shown in the attached screen-shot image.
What can I do?
Thank you very very much.
Note: in another PC with WinXP I have no problems.
Firstly make sure phone can run MTP (make sure if you delete MTP releated stuff in system you won't able connect it. Re-flash with Odin) Now if you don't have problem with phone then uninstall drivers & KIES from Windows. Don't just do a uninstall clear temp files, dll files, registry entries (you can use CCleaner) then install THIS DRIVERS.
explanation
King ov Hell said:
Firstly make sure phone can run MTP (make sure if you delete MTP releated stuff in system you won't able connect it. Re-flash with Odin) Now if you don't have problem with phone then uninstall drivers & KIES from Windows. Don't just do a uninstall clear temp files, dll files, registry entries (you can use CCleaner) then install THIS DRIVERS.
Click to expand...
Click to collapse
Hello, thank you for your answer.
How can I make sure my phone can run MTP?
For the complete uninstall, is it enough to run CCleaner, uninstall Kies and then perform the Registry Cleaner in CCleaner?
Thank you
ZioAlfredo said:
Hello, thank you for your answer.
How can I make sure my phone can run MTP?
For the complete uninstall, is it enough to run CCleaner, uninstall Kies and then perform the Registry Cleaner in CCleaner?
Thank you
Click to expand...
Click to collapse
Did you root phone ? or installed a ROM or you just using it stock ?
I noticed something too; if you any have PIN or Password you have to unlock phone otherwise MTP not works. Unlock it and try too.
CCleaner will *probably* be enough but if you want to make sure go to regedit.exe and go to;
Code:
HKEY_CURRENT_USER/Software/
Then delete KIES & USB Driver stuff (don't delete system USB configs & drivers just Samsung's softwares )
EDIT: In start menu click to RUN (or whatever I don't now it's name in English, you're entering a text) Then write
Code:
%AppData%
Then delete KIES & Samsung folders and files.
I've just Updated the phone firmware from Android 2.3.6 to 4.1.2 with Samsung Kies on my WinXP PC.
I've deleted all Samsung Kies registry entries.
Now I'm going to install the driver you suggested...
Let me see results...
King ov Hell said:
Let me see results...
Click to expand...
Click to collapse
Failure... The same as always
ZioAlfredo said:
Failure... The same as always
Click to expand...
Click to collapse
...
I've also installed Windows MTP Porting Kit, but it still fails...
Any idea?..
I think it is the configuration of this PC, because in another brand new PC with Windows 7 I've installed Kies and it all went right.
ZioAlfredo said:
I've also installed Windows MTP Porting Kit, but it still fails...
Any idea?..
I think it is the configuration of this PC, because in another brand new PC with Windows 7 I've installed Kies and it all went right.
Click to expand...
Click to collapse
Have you tried to reboot phone? I lost mtp after charging phone over wall charger. Everytime I need to reboot after charging to get it connected to pc.
Sent from my GT-I9070 using Tapatalk
This may be a bit silly but is important to ask.
Was your PC connected connected to the internet while installing the drivers??
Did you unplug your phone while the drivers were being installed??
anantttt said:
This may be a bit silly but is important to ask.
Was your PC connected connected to the internet while installing the drivers??
Did you unplug your phone while the drivers were being installed??
Click to expand...
Click to collapse
Yes to all.
shut_down said:
Have you tried to reboot phone? I lost mtp after charging phone over wall charger. Everytime I need to reboot after charging to get it connected to pc.
Sent from my GT-I9070 using Tapatalk
Click to expand...
Click to collapse
I've just tried to reboot the phone before connecting it to the PC, but I get the same error (see attachments).
Last year I managed to connect the phone to this PC, but, in any case the connection got interrupted after a while (see this thread).
I don't know what to do...
I had the same problem when i formatted my PC 2 days ago. I did some trial and error and it worked.
1. Dont use any USB Hub if you are using.
2. Remove the Pattern lock or any password security etc. Go to lock screen and select 'None'. (I dont know why but windows doesn't recognise if the device is locked)
3. Have Kies installed. Even new version worked for me. I used 2.5.13043_14
4.Connect your device with the USB cable (Should have MTP option selected which is by default)
5. Windows automatically recognises now and installs the necessary files.
P.S:- Remove the security pattern, etc. It really works.
If worked then pls reply.
Hello,
I've disable any screen lock on my phone and I've connected the USB cable to another USB port (a 3.0 USB port) and Windows magically recognized correctly the device! (no Kies installed, only drivers)
Anyway, after some minutes of usage (cut-paste of files). Windows stopped recognizing the device...
If I disconnect the phone and then connect it back, Windows still recognizes it, but I have few minutes until the device stops being recognized and no file on it can be read...
See attached pictures
ZioAlfredo said:
Hello,
I've disable any screen lock on my phone and I've connected the USB cable to another USB port (a 3.0 USB port) and Windows magically recognized correctly the device! (no Kies installed, only drivers)
Anyway, after some minutes of usage (cut-paste of files). Windows stopped recognizing the device...
If I disconnect the phone and then connect it back, Windows still recognizes it, but I have few minutes until the device stops being recognized and no file on it can be read...
See attached pictures
Click to expand...
Click to collapse
Did you download newest version of drivers? I see in your screenshot it says 2012, on mine it is 2014.
Did you set Windows to gather drivers automaticaly from the internet?
shut_down said:
Did you download newest version of drivers? I see in your screenshot it says 2012, on mine it is 2014.
Did you set Windows to gather drivers automaticaly from the internet?
Click to expand...
Click to collapse
This is how my PC recognizes my phone. The driver seems to be old, but I've configured Windows for downloading drivers automatically and that is all it can do.
Today, th PC did not recognized the phone at once. Then I unmounted and mounted back the MicroSD card and the PC recognized it.
But, after few seconds of folder browsing, the PC lost the connection. I'm thinking that the problem is the SD card.
Solved!
Solved!
It was the USB cable.
I replaced it with an original one and now it works.
Thank you everybody for your effort!
Hello to all,
I just bought an Acer Iconia One 8 B1-810 and I have a few questions.
First of all, is there already a way to root this device, or else is the root under way?
Secondly, is there another way than rooting the tablet if I want to get rid of the bloatware? There are many pre-installed Google, Acer and Amazon apps I'd like to get rid of.
Now, am I right to assume that to get rid of the bloatware, I can simply stop and deactivate the apps I don't want, and then erase the corresponding .apk and .odes files in the appropriate folder? Or is there something else that I must do?
Thanks for helping; the Iconia One 8 B1-810 is a fine tab, but this bloatware is driving me insane!
Best Regards and a Happy New Year from the South of France.
Root acer ionica one 8
Credits @social-design-concepts for his great work and exploit for Intel Tab Devices and @Shreps for this detailed tutorial
Download
IntelAndroid-FBRL.7z available at http://click.xda-developers.com/api...t #2375 - XDA Forums&txt=IntelAndroid-FBRL.7z thx to @social-design-concepts
SuperSU zip UPDATE at http://download.chainfire.eu/supersu
Procedure
Copy SuperSU UPDATE ZIP on your Device
Make sure you properly installed USB Driver and enable USB Debugging on your Tab
Unzip IntelAndroid-FBRL.7z
Plug your Tab with USB Cable and start launcher.bat
Your tab should prompt if you want to authorize debugging, choose Yes/Allow
Type ACCEPT ont the cmd screen, press enter
On your deskop, the script should auto detect the Tab like this (device status online + color blue) :
Type "T3", press enter
The @social-design-concepts scripts will now reboot your tab into Bootloader mode and start the exploit
If the Exploit is OK, CWM will boot on your tab :
You can now use Vol+ and Vol- to navigate, and press Power to validate
Go to "install zip", "choose zip from sdcard", "0"/, and select your UPDATE Super ZIP
Flash it ! Go back to the main menu and reboot your device
Your tab is now rooted, enjoy
Dead link and a few questions
[email protected]Hi,
Thanks for your reply. I've got a few questions/comments:
- The first link doesn't work, unfortunately.
- Will this root work for all Intel-based Android tabs?
- I wen t to Acer's website. There are no USB drivers to download for the Iconia One 8 B-810. I already connected my tab to my laptop, though, and it was recognised by Windows 8.1. Does this mean that the USB drivers might already be installed by default on the laptop?
Thanks for helping,
Best Regards.
vbdx66 said:
[email protected]Hi,
Thanks for your reply. I've got a few questions/comments:
- The first link doesn't work, unfortunately.
- Will this root work for all Intel-based Android tabs?
- I wen t to Acer's website. There are no USB drivers to download for the Iconia One 8 B-810. I already connected my tab to my laptop, though, and it was recognised by Windows 8.1. Does this mean that the USB drivers might already be installed by default on the laptop?
Thanks for helping,
Best Regards.
Click to expand...
Click to collapse
The link is now fixed, sorry for that.
-it works on several acer/levorno models, inclusive Acer Ionica One 8 B1-810, I just rooted my yesterday.
-About the drivers no, you have to install ADB drivers, to do that download Cydia Impactor extract the downloaded files to your desktop run the app under USB chose Driver Scan and install the driver and you are ready to start .
Root
Hello,
Thank you for all this information. I will try to root my Iconian One 8 B1-810 over the weekend and tell you whether I succeeded or not.
Best Regards
Error Message!
Hi again,
I downloaded Cydia Impactor and tried to upload the drivers to my device as you said but it doesn't work. I connect the tablet to the computer with an USB cable, launch Cydia Impactor, choose USB then Driver Scan but all I get an error message stating No such device. Any idea about what I am doing wrong?
Since you have already rooted your tablet, could you possibly attach the drivers here or send them in a private message? This would really help me.
Best Regards.
vbdx66 said:
Hi again,
I downloaded Cydia Impactor and tried to upload the drivers to my device as you said but it doesn't work. I connect the tablet to the computer with an USB cable, launch Cydia Impactor, choose USB then Driver Scan but all I get an error message stating No such device. Any idea about what I am doing wrong?
Since you have already rooted your tablet, could you possibly attach the drivers here or send them in a private message? This would really help me.
Best Regards.
Click to expand...
Click to collapse
hi, in order to install the drivers, you have to activate the "USB debugging" option under the "developer options" on you device.
then run Impactor.
if that fails, tomorrow I will leave you a backup of my drivers on attch.
Did not work for me
Hi guys, thanks for the post but this does not work on my B1-810. When my tablet reboots it does not boot into CWM. Can anybody tell me what the message in the attached screenshot means?
These were the driver I used.
This video show you ,how i done it.
USB Debug enabled but unable to root
alexys77 said:
These were the driver I used.
This video show you ,how i done it.
Click to expand...
Click to collapse
Hello Alexys77
I have got the same problem as Slithertooth and i get exatly the same screenshots on my B1-810 when I start launcher.bat on the computer.
Many thanks for uploading your drivers here. I downloaded the .zip file on my computer but I don't know where to start.
Could you please tell us which files we need and how we must install them on the computer after dezipping?
Sorry if I ask silly questions, but this is the first time I am atempting to do this (I rooted a Galaxy Tab 2 7.0 a long time ago, but it was a one-click root-thing).
Thanks again for helping,
vbdx66.
hi slithertooth and vbdx66 thats easy to resolve .
This screenshots mean that the ADB drivers are not correctly installed.
To resolve this, with your tablet in Droidboot mode and connected, go to device management on your PC and find driver with a "yellow ?" click properties click on update navigate to unzipped drivers and click ok.
Then execute launcher.bat file again.
alexys77 said:
hi slithertooth and vbdx66 thats easy to resolve .
This screenshots mean that the ADB drivers are not correctly installed.
To resolve this, with your tablet in Droidboot mode and connected, go to device management on your PC and find driver with a "yellow ?" click properties click on update navigate to unzipped drivers and click ok.
Then execute launcher.bat file again.
Click to expand...
Click to collapse
Hello Alex:
About the MTP driver yellow mark
How to solve this ? Could you help to provide the MTP driver for me install?
Thanks
droidboot mode
Hello Alex,
I have a question, too. What do you mean by Droidboot Mode exactly?
Thanks.
Kelly5119 said:
Hello Alex:
About the MTP driver yellow mark
How to solve this ? Could you help to provide the MTP driver for me install?
Thanks
Click to expand...
Click to collapse
The MTP driver is inclued on the folder "Dispositivo USB MTP"
---------- Post added at 11:59 AM ---------- Previous post was at 11:44 AM ----------
vbdx66 said:
Hello Alex,
I have a question, too. What do you mean by Droidboot Mode exactly?
Thanks.
Click to expand...
Click to collapse
i mean Fastboot mode, Acer call it Droidboot.
-power off your tablet , then press V+ and Power, old it for a few seconds and release it when Acer logo pops up.
it worked!
I booted into "droidboot" and then connected to my laptop with usb debugging enabled. Then i downloaded Cydia impactor and using the USB drop down menu in this small program I was able to successfully instal the needed drivers. CWM then came up following the previous instructions.
Now can we flash ROMs on this tablet???
Success!
Well guys, I went through the whole process again, which was very tedious to say the least, and apparently it worked, SU is now flashed on my B1-810!
I now have Root Access in ES explorer, so this is simply brilliant. I can now access the external SD card or without restrictions again, which is just what I was looking for
Something strange, though: I installed Root Checker and it says me my tab is not rooted... Can it come from the B1-80 running an 'exotic' Intel Bay Trail processor?
I would be very interested to know what results you guys get from Root Checker after the whole rooting process is completed. Does Root Checker also tell you your B1-810 is not rooted even though it is? Is there another way to check that the tab is properly rooted, or can it be 'half-rooted' or something of the kind?
Best Regards to all and many thanks to Alex for the great job done
Update - Tablet Rooted
Hi again guys,
According to another root checking programming, my tab is properly root. Screen capture in attach. This time I used the Root Checker programming from Free Android Tools.
Update - I checked properly again, and now the other progrwm, Root Checker Basic developed by joeykrim, also tells me my tab has full root access. Cheers!
And Now That B1-810 is rooted, what?
My main concern to root this tab was to get full access to the external SD card again (done) and to definitely get rid of the bloatware, which comes unfortunately in quantities on the Acer B1-810. I already deactivated many apps I won't I use, like Email and Gmail (I use Aquamail) and Acer Docs, Acer Music, etc.
Now that the device is rooted, can someone who's already done this can tell we whether, under root, there is a safe and efficient way to completely uninstall these unwanted apps, like any 'normal' app downloaded from Google Play? Should I just suppress the relevant apk's with ES explorer or could this make the system unstable?
Furthermore, is there a way to control which apps the tab will start when booting?
And lastly, is there any way to tell the KitKat Camera app that it should store the pictures on the external SD card by default?
Any other things you guys are willing to do now that your tab is rooted? I am curious.
Best Regards.
vbdx66 said:
My main concern to root this tab was to get full access to the external SD card again (done) and to definitely get rid of the bloatware, which comes unfortunately in quantities on the Acer B1-810. I already deactivated many apps I won't I use, like Email and Gmail (I use Aquamail) and Acer Docs, Acer Music, etc.
Now that the device is rooted, can someone who's already done this can tell we whether, under root, there is a safe and efficient way to completely uninstall these unwanted apps, like any 'normal' app downloaded from Google Play? Should I just suppress the relevant apk's with ES explorer or could this make the system unstable?
Furthermore, is there a way to control which apps the tab will start when booting?
And lastly, is there any way to tell the KitKat Camera app that it should store the pictures on the external SD card by default?
Any other things you guys are willing to do now that your tab is rooted? I am curious.
Best Regards.
Click to expand...
Click to collapse
I deleted anything I didn't want using es file explorer. Navigate to the system app list from the dropdown menu and delete all the bloat you want. I deleted quite a bit and just disabled anything I was unsure of and I've run into no problems yet.
Which system apps to delete?
@slitertooth: Could you please be more specific? This is the first time I am doing this and I am afraid of damaging the device. If you don't mind, which apps did you deactivate and which did you completely uninstall?
Thanks.
No windows 10 HDB driver it just wont allow me to use hisuite at all, ive looked everywhere but nothing, used different cables and all that stuff so im lost, any ideas.
kingcapning said:
No windows 10 HDB driver it just wont allow me to use hisuite at all, ive looked everywhere but nothing, used different cables and all that stuff so im lost, any ideas.
Click to expand...
Click to collapse
Hi suite works all annoyingly well for me. Dunno what's wrong on your end, buddy.
Annoyingly, because it always pings my desktop and opens whenever I connect to my PC.
kingcapning said:
No windows 10 HDB driver it just wont allow me to use hisuite at all, ive looked everywhere but nothing, used different cables and all that stuff so im lost, any ideas.
Click to expand...
Click to collapse
USB-Configuration in developeroptions checked?
If any Option like it should be, try reinstall of HiSuit on PC?! (! If de & reinstall, SAVE your [email protected] BEFORE uninstall Hisuite!)
Have same issue on two p20 pro, both brand new, and factory settings. Can't figure it out
CaptainKaracho said:
USB-Configuration in developeroptions checked?
If any Option like it should be, try reinstall of HiSuit on PC?! (! If de & reinstall, SAVE your [email protected] BEFORE uninstall Hisuite!)
Click to expand...
Click to collapse
Ill try that now
Edit: I have mpt checked, so i have no idea.
kingcapning said:
No windows 10 HDB driver it just wont allow me to use hisuite at all, ive looked everywhere but nothing, used different cables and all that stuff so im lost, any ideas.
Click to expand...
Click to collapse
Turn off USB debugging.
Completely delete all drivers whilst not connected. In Windows click options show all devices, including hidden.
Install hisuite.
Next connect the phone then let it install.
Then disconnect and turn on USB debugging.
Let it install that too.
Can you see the device?
PS: there's only so many ways it can connect.
Nuking the driver then reconnecting afresh is the best way.
WORKED:
uninstall all of hisuite components with revo uninstaller
restart pc
connect phone via usb
turn on debugging
then open hisuite installer that shows as virtual CD in my computer
install it, and open
now, on phone ALLOW HDB
go to developer options, and as USB CONNECTION TYPE choose charging
and allow your PC to use phone
thats it
hexen88 said:
WORKED:
uninstall all of hisuite components with revo uninstaller
restart pc
connect phone via usb
turn on debugging
then open hisuite installer that shows as virtual CD in my computer
install it, and open
now, on phone ALLOW HDB
go to developer options, and as USB CONNECTION TYPE choose charging
and allow your PC to use phone
thats it
Click to expand...
Click to collapse
Doesnt work
Sorted HiSuite P20 Pro back on running Fixed, Thank's
kingcapning said:
Doesnt work
Click to expand...
Click to collapse
### The only way it worked for me was after being connected to the PC and have opened the HiSuite THEN GO to the last step and it looks is the only way it changes for charging only. If you don't have either the PC connected and on the HiSuite program, it doesn't change at all. Check bellow on the ###.:good:
Well it worked for me any way Thank's hexen88
Quote:
Originally Posted by hexen88
WORKED:
uninstall all of hisuite components with revo uninstaller
restart pc
connect phone via usb
turn on debugging
then open hisuite installer that shows as virtual CD in my computer
install it, and open
now, on phone ALLOW HDB
### go to developer options, and as USB CONNECTION TYPE choose charging
and allow your PC to use phone
thats it
Also check your cable, some cables only allow charge only.
leighfwarren said:
Also check your cable, some cables only allow charge only.
Click to expand...
Click to collapse
It must of been a bug, once i updated to 9.0 it now connects fine and has done since updating.
If it still helps i think i got it.
Use the original huawei charging cable you got with the phone.
I tried it all.. tethering, debugging, hisuite etc.. but nothing worked
1. step Install HiSuite on computer,
2. step plug in your phone with original cable,
3. step HiSuite on computer will run by itself,
4. step select transfer files on your phone,
5. step computer will ask you if you all it to install HiSuite on your phone and click ok,
6. step on your phone pop up will show to install HiSuite on Huawei.
Maybe also go to settings - connections - usb thetering (if needed) and thick it.
Hope it helps, it did for me - but barley lost my mind...
Good luck,
Toni