Hi Guys,
I can see this has been answered before but i can't seem to find any info that has helped.
I tried updating my Galaxy Gear VIA Keis and it wouldnt work so then i moved on to Odin to install Tizen and while installing i received the error "Firmware Upgrade Encountered An Issue. Please select recovery mode in Kies & try again". I know from research that Keis will no longer solve this issue. which i also tested to confirm. so then i downloaded the first firmware for the galaxy to flash with Odin and i just get stuck here:
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Can't open the serial(COM) port.
I have gotten past this at one point by trying other ports and or cords however it would stop at the "Zbrush thing". Does anyone else have any other ideas... maybe a different flasher or os or anything. can't just have lost the watch by doing this surely.! help me Obi Phone Kenobi's you are my only hope!
Related
Hi, n00b poster here...
Got a "force stop" as soon as the phone boots up. Tried the software reset, didnt work, so now trying to do the flash in download mode. Got all the files (.pit and the .tar file) got OdinV3 and the drivers are installed to detect the phone.
However, when I click the start button OdinV3 causes a fatal error and crashes. I have tried this on multiple computers and it does the same thing. HELP PLEASE!
EDIT: I am using the i9000DTJF3 file found on these forums as its the original OPTUS firmware.
You can give Heimdall (my flashing tool) a try if you want. I suspended the public alpha for the moment because it bricked a phone however if nothing else is working you might as well give it a shot.
Send me a PM if you would like the download link.
Before you do that however, have you tried removing the battery for a couple of minutes then retrying? I'm not actually sure how that makes any sense but quite a few people have reported it as helping.
ok, so downloaded the DTJG4 firmware from samsung firmwares and it now gets to this;
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
Should this take a long time? I figured it wasnt working once it sat there for ages...
c0ris said:
ok, so downloaded the DTJG4 firmware from samsung firmwares and it now gets to this;
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
Should this take a long time? I figured it wasnt working once it sat there for ages...
Click to expand...
Click to collapse
Nope, that should be pretty much instantaneous.
Are you sure you're in download mode and not recovery mode?
nsgtr34 said:
Are you sure you're in download mode and not recovery mode?
Click to expand...
Click to collapse
I can't remember, will Odin even detect a phone in recovery mode?
all fixed, tried another firmware off another site and it worked ok...back to normal thank f**k
I was following the overcome guide and when i came to step 8/9 (flash overcome kernel) it didn't work, so then i chose the same pit which you use in a previous step and also the kernel and now it worked with the pit but not the kernel. i got stuck in download mode and tried to flash only kernel again but it didn't work not it got stuck on ConnectionSetup... or something like that. I think it couldn't find the device, i shut down odin and took out the micro-sd card which someone said could cause problems but it still didn't work. now i'm stuck at a screen like this: picture of phone .. ! .. picture of computer. I guess it means it can't connect to the computer. Anyone know what to do? I've tried searching the forums and tried some different stuff but haven't succeded.
Edit: Seems like i can use odin even though i don't get into the download mode, will update soon. Seems to work correctly, i'll give the flashing another try and i will make sure to cross the right boxes and so on.
Edit2: This time i checked that i had all the correct things crossed in Odin but when i try to flash the kernel it fails. what should i do? i come from gingerbread 2.3.3 (re-stocked) so it can't be the bootloader right?
Edit3: This is what i get when i try to flash the kernel:
<ID:0/036> Added!!
<ID:0/036> Odin v.3 engine (ID:36)..
<ID:0/036> File analysis..
<ID:0/036> SetupConnection..
<ID:0/036> Initialzation..
<ID:0/036> Get PIT for mapping..
<ID:0/036> Firmware update start..
<ID:0/036> ‹
<ID:0/036> NAND Write Start!!
<ID:0/036>
<ID:0/036> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Edit4: From my research it seems i have the same problem as people hade with the signed/locked bootloaders on froyo, however i'm running 2.3.3 and the thread specifically said not to use their patch so i have no idea of how to solve this. Help would be very appreciated.
Edit5: finally works, thanks to this: http://forum.xda-developers.com/showthread.php?t=1324052
I have been trying to flash my Samsung Galaxy S i9000 for a week now with no success.
First off, it has a lot of problems connecting when I am in download mode. It has no problem at all when the phone is fully booted up, but Odin has a really hard time seeing it while the phone is in download mode. I have to restart the phone several times into download mode and pull the cable, etc until I can finally get Odin to see it.
Once I get Odin to finally see the phone in download mode I loaded the PIT and the PDA files from the tutorial for DarkyROM_10.2_Resurrection.
But when I hit start is just stops here:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
And will not go any further.
I originally rooted with one click, but I am afraid I might have messed that up. After I did the one click I was messing around with the phone and formatted the internal memory from the download screen. I even went back into one click to try to unroot, but it gives me an error message.
Did I mess up my phone? Is there any way to fix this?
have you ever succeeded in flashing with odin or first time?
have you closed all kies programs from task manager? (do you even have it installed?)
if you have win7, have you opened odin with right click menu->as administrator?
what ver. of odin do you use?
maybe the cable is faulty?
did you connect it directly to the comp or by some hub? (better connect directly)
guy7685,
No, I have never flashed before. This is the first time.
I tried running Odin as system admin, made no difference.
I do not have Kies installed.
I'm pretty sure the cable is good, it works fine for everything else including data transfer on my other phone, just not in download mode for this phone.
I've tried a few different versions. v1.30, v1.83, v1.85
When I tried in in v1.83 & v1.85 I get a fail, then this message:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
Any thoughts?
If you have another computer you can try it on, do that otherwise I think you need to install the drivers again. You can search for them or you can install them via kies. Once you have kies installed go to tools and install drivers.
Remember that before you open Odin you go through task manager to close all kies processes.
Good luck
Sent from my GT-I9000 using XDA
Got it to work
I was finally able to get it to work. I think I was using the wrong recovery screen or at least what I thought was a recovery screen because I finally got the guy in the construction picture and it flashed no problem with Odin.
After Odin Succes
Everything is ok and all thred completed (succesd 1 / failed 0)
After this, my galaxy tries to reboot but it only shows the flashing battery and will not reboot itself.
Help!
jimnycricket65 said:
Everything is ok and all thred completed (succesd 1 / failed 0)
After this, my galaxy tries to reboot but it only shows the flashing battery and will not reboot itself.
Help!
Click to expand...
Click to collapse
i have similar problem. Please have you gotten solution to this problem? Your help is appreciated. Thanks.
are you instaled drivers completly???
alireza17mah said:
are you instaled drivers completly???
Click to expand...
Click to collapse
Right Click -> Run As Administrator it should resolve the issue
If its showing the battery only then its probably the wrong flash file.
Sent from my GT-I9000 using xda app-developers app
I think I may have done it this time. I was trying to root my galaxy tab ATT SGH-I957 through Odin. I flashed AOSP through Odin, it showed it flashed successfully. So I began to boot my tablet up in Recovery Mode. I got the following Message Under ODIN MODE: "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
I then connect my tablet into my laptop, and try to connect it to Kies only to find that Kies cannot discovery my tablet, as it just continues to show that kies is trying to connect the device.
I then try to get back into Odin3 v1.83 to see if I can flash the stock recovery.rar and get a red FAIL with the Following Message:
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1
So- I am at a loss.
I honestly cannot give any further details as to where I goofed- as I did this while watching NLDS Game 5 as a Cardinals fan.. Too much excitement I guess.
Still stuck.. have I royally screwed things up?
jhgebel said:
I think I may have done it this time. I was trying to root my galaxy tab ATT SGH-I957 through Odin. I flashed AOSP through Odin, it showed it flashed successfully. So I began to boot my tablet up in Recovery Mode. I got the following Message Under ODIN MODE: "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
I then connect my tablet into my laptop, and try to connect it to Kies only to find that Kies cannot discovery my tablet, as it just continues to show that kies is trying to connect the device.
I then try to get back into Odin3 v1.83 to see if I can flash the stock recovery.rar and get a red FAIL with the Following Message:
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1
So- I am at a loss.
I honestly cannot give any further details as to where I goofed- as I did this while watching NLDS Game 5 as a Cardinals fan.. Too much excitement I guess.
Click to expand...
Click to collapse
You didn't by chance flash a ROM for the 7300?
If so, I think you are screwed, as the hardware is different as well as the partitions.
go back and check the filename for the .tar you flashed.
Sent from my SAMSUNG-SGH-I957 using XDA Premium HD app
Flash the stock rom through odin and you'll probably be ok. You can find the stock rom on sammobile. Make sure you get the right one for your device.
Sent from my SAMSUNG-SGH-I957 using xda app-developers app
jhgebel said:
I think I may have done it this time. I was trying to root my galaxy tab ATT SGH-I957 through Odin. I flashed AOSP through Odin, it showed it flashed successfully. So I began to boot my tablet up in Recovery Mode. I got the following Message Under ODIN MODE: "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
I then connect my tablet into my laptop, and try to connect it to Kies only to find that Kies cannot discovery my tablet, as it just continues to show that kies is trying to connect the device.
I then try to get back into Odin3 v1.83 to see if I can flash the stock recovery.rar and get a red FAIL with the Following Message:
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1
So- I am at a loss.
I honestly cannot give any further details as to where I goofed- as I did this while watching NLDS Game 5 as a Cardinals fan.. Too much excitement I guess.
Click to expand...
Click to collapse
Turn off .. firewall, anvir, run odin as administrator
Sent from my GT-P7300 using xda premium
Dear All,
My phone was not working last month it will be stuck on samsung logo, then later i tried to use odin to put again firmware but it will fail on "system.img" .
Now my phone shows "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again".
In Kies my phone is not detecting at all in firmware emergency recovery.
Kindly help guys...i am really tensed. Even with other firmware in Odin its getting stucked in "system.img" and it fails.
help me guys...its showing in odin
<ID:0/011> Added!!
<ID:0/011> Odin engine v(ID:3.1005)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
https://forums.androidcentral.com/g...e-write-operation-failed-what-can-i-do-2.html
Maybe this will help or try a different usb port? Also look on youtube theres some helpful vids on there or uninstall kies it can sometimes interfere with odin good luck.
are you sure your unit is thecorrect one for correct firmware?
what does it say on what model it is on DL mode?
supertac said:
are you sure your unit is thecorrect one for correct firmware?
what does it say on what model it is on DL mode?
Click to expand...
Click to collapse
GT-I9305
still unable to solve
permission to double to post:
i cant even put another firmware...it always fails on NAND System, does my phone has hardware issue?