Database Develop

[Q] SG totally Bricked

Hello,
I got a Samsung Galaxy S I9000 that has trouble with it ROM ... when trying to repair it with a custom ROM installation using Odin I Had a trouble with my desktop and Odin Crashed that made the SG totaly bricking it doesn't even responded to the ON/OFF button
Can any one help me to hard reset it or something ??? Please .
Thanks a lot.

walid-zappa said:
Hello,
I got a Samsung Galaxy S2 that has trouble with it ROM ... when trying to repair it with a custom ROM installation using Odin I Had a trouble with my desktop and Odin Crashed that made the SG2 totaly bricking it doesn't even responded to the ON/OFF button
Can any one help me to hard reset it or something ??? Please .
Thanks a lot.
Click to expand...
Click to collapse
Turn off phone by pulling off the battery and place it back in. While the phone is off, press Volume Up + Home Button + Power Button to enter recovery mode. In recovery, navigate using volume buttons and select wipe data/factory reset and wipe cache and try to install another rom from there. If it doesn't work for you, enter download mode on your device (Volume down+home button+power button) and reflash the firmware using odin. Happened several times to me, hoped I helped

Paul_Kolanjian said:
Turn off phone by pulling off the battery and place it back in. While the phone is off, press Volume Up + Home Button + Power Button to enter recovery mode. In recovery, navigate using volume buttons and select wipe data/factory reset and wipe cache and try to install another rom from there. If it doesn't work for you, enter download mode on your device (Volume down+home button+power button) and reflash the firmware using odin. Happened several times to me, hoped I helped
Click to expand...
Click to collapse
Just a correction it's a GT-I9000 Samsung Galaxy S, the Phone is totaly Bricked it doesn't turn on totally :/ i'v tested to put the phone with USB cable on another PC and i had driver Problems to install a driver called SEC S5PC100 Test B/D.

Moved to Galaxy S I9000 fora.
A.cid
Forum Moderator

walid-zappa said:
SEC S5PC100 Test B/D.
Click to expand...
Click to collapse
Look in
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[Tutorial][A.I.O. Rescue & Recovery] My Android Solutions. [Help & Troubleshooting] about it
Check this out! Links to useful Guides and " Banned " Documentaries ​

[Q] Unable to bootafter aborted lollipop update. (moto g 1068 DS)

Hi,
After getting the lollipop update notice, i downloaded and tried installing the same. But after reboot at about 2/3rd installation of new system it aborted with no error at an icon with dead android. This icon persisted for a long time and i rebooted the mobile. Now it is stuck at "powered by android" message with no progress.
I have tried so far:
- vol down button and power: Recover option. This gave me no command error.
- vol up button and power: delete /data and /cache. The mobile automatically rebooted and is stuck at the same message - "powered by android"
How I can recover my mobile? either to stock 4.4.4 or 5.0
My cell is stock 4.4.4, dual sim 1068 (Indian version)
Thanks for any help..

I have the same problem as you, have you found any solution yet?

balajid said:
Hi,
After getting the lollipop update notice, i downloaded and tried installing the same. But after reboot at about 2/3rd installation of new system it aborted with no error at an icon with dead android. This icon persisted for a long time and i rebooted the mobile. Now it is stuck at "powered by android" message with no progress.
I have tried so far:
- vol down button and power: Recover option. This gave me no command error.
- vol up button and power: delete /data and /cache. The mobile automatically rebooted and is stuck at the same message - "powered by android"
How I can recover my mobile? either to stock 4.4.4 or 5.0
My cell is stock 4.4.4, dual sim 1068 (Indian version)
Thanks for any help..
Click to expand...
Click to collapse
If you can get to fastboot mode by holding power and volume down till screen goes blank -- count 1,2,3,4,5 release both and recovery should come up.
run my installer in signature, ignore device not found and hopefully it will flash your xt1068

mile18 said:
I have the same problem as you, have you found any solution yet?
Click to expand...
Click to collapse
External Reset
If you are unable to access the phone's menu to perform the standard reset you can attempt an external factory reset.
Notes:
When using this feature; everything is deleted from the device.
Reset will require a minimum battery level of 25%. If you are unable to perform a reset, please charge for 20-30 minutes and try reset again.
1. With the phone powered off, press the VOL DOWN KEY for 2-3 seconds then POWER key then release.
2. The device will display different BOOT OPTIONS (THIS IS BOOTLOADER SCREEN)
2A GOTO 3 TO RESET OR RUN MY SCRIPT FROM SIGNATURE ( YOUR CHOICE)
3. Use the VOL DOWN Key to SCROLL to Recovery and VOL UP Key to select
Tip: If the device reboots, you may have waited to long to make a selection, you will need to begin the process again.
4. The device will display the Motorola logo and then the Android in distress ( logo with Exclamation mark)
5. Press and hold the VOL UP key for 10-15 seconds. While still holding the VOL UP key tap and release the POWER key
Tip: You can try this step, holding the phone in landscape. If you are stuck on step 6, try a force reboot by pressing the Power key and Vol Down key, and start the process again.
6. The device will display additional menu options (Text will appear in BLUE)
7. Use the VOL DOWN Key to scroll to Wipe data / factory reset and the POWER Key to select this option
8. Use the VOL DOWN key again to select YES - delete all user data and press the POWER key to CONFIRM
9. Once the Formatting is complete, press the POWER key to confirm a REBOOT
10. The device will reboot and start the normal power up sequence

stock firmware is now available flash firmware.

[email protected] said:
stock firmware is now available flash firmware.
Click to expand...
Click to collapse
Can you please tell me from where I can download stock 5.0.2 rom ?
Now I'm using this one but i want to make a clean install and I'm looking for a zip close to this.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Would it be possible to flash it with TWRP ?

epivitor said:
Can you please tell me from where I can download stock 5.0.2 rom ?
Now I'm using this one but i want to make a clean install and I'm looking for a zip close to this.
Would it be possible to flash it with TWRP ?
Click to expand...
Click to collapse
here u go: http://forum.xda-developers.com/moto-g-2014/general/official-stock-firmware-t3018682

[Q] - HTC One (M7), Stuck in Bootloader.

Hi all,
Apologies if I don't include all the information you require, first time posting in here. (I'll add some screenshots tomorrow evening)
I was attempting to unlock the boot loader to begin the process of installing Cyanogen Mod onto the device. After powering down and entering the bootloader(?) I have been unable to select any options and can't get out of it. It appears that the volume up button works, but the volume down and power buttons do not. The device isn't recognised when attached to a PC either. Not really sure where to proceed from here and any help would be appreciated.
Cheers,
Gurk

Gurk12 said:
Hi all,
Apologies if I don't include all the information you require, first time posting in here. (I'll add some screenshots tomorrow evening)
I was attempting to unlock the boot loader to begin the process of installing Cyanogen Mod onto the device. After powering down and entering the bootloader(?) I have been unable to select any options and can't get out of it. It appears that the volume up button works, but the volume down and power buttons do not. The device isn't recognised when attached to a PC either. Not really sure where to proceed from here and any help would be appreciated.
Cheers,
Gurk
Click to expand...
Click to collapse
Hold the power button to reboot the phone in the OS. Then get your volume button repaired, you'll need it if you start flashing stuff, even unlocking the bootloader will requires to use the volume down button.

alray said:
Hold the power button to reboot the phone in the OS. Then get your volume button repaired, you'll need it if you start flashing stuff, even unlocking the bootloader will requires to use the volume down button.
Click to expand...
Click to collapse
Holding the power button does not reboot the phone into the OS. The volume buttons do work as does the power button, however in the bootloader only the volume up button appears to work. (Sorry that I did not make that clear in the original post)

Gurk12 said:
Holding the power button does not reboot the phone into the OS. The volume buttons do work as does the power button, however in the bootloader only the volume up button appears to work. (Sorry that I did not make that clear in the original post)
Click to expand...
Click to collapse
Wha tis your bootloader version and what windows version are you using?

alray said:
Wha tis your bootloader version and what windows version are you using?
Click to expand...
Click to collapse
Sorry about the rubbish image quality. Think this is what you're asking for?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Using Windows 10.

The phone stuck after trying to install rom

Hello! I have tried to install the THE GALAXY PROJECT rom
first I intalled TWRP
I try to wipe the phone and I got a massage:
"failed to mount data internal"
afterwards I anyway tried to intalled the rom and after the Installation done the phone try to reboot and failed. I got some massage about permission and with botton to reboot, and I clicked.
anyway now my phone stuck on circle with lightning.
I try to enter recovery mode or download mode and didn't make it.
please help.
(sorry for my english, I'm not a native)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

jd14771 said:
At some point, the Download mode trigger as changed.
to get download mode:
-Turn phone OFF
-HOLD VOLUME DOWN + BIXBY
-Plug phone into computer with USB cable while HOLDING the above BUTTONS.
-You should be in Download Mode.
Click to expand...
Click to collapse
thank you.
before I saw you comment I click on POWER + BOTTON DOWN.
now my phone stuck on the first screen (samaung galaxy note9..)
I want to try you suggestion but how I turn the phone OFF? he stuck on screen.
also I'm trying to Hold VOLUME DOWN + BIXBY and connect the cable like you said and nothing happened..
if I holding VOLUME DOWN + BIXBY + POWER the screen changed to black for second and again show me the 'samaung galaxy note9' screen.

yamar8 said:
thank you.
before I saw you comment I click on POWER + BOTTON DOWN.
now my phone stuck on the first screen (samaung galaxy note9..)
I want to try you suggestion but how I turn the phone OFF? he stuck on screen.
also I'm trying to Hold VOLUME DOWN + BIXBY and connect the cable like you said and nothing happened..
if I holding VOLUME DOWN + BIXBY + POWER the screen changed to black for second and again show me the 'samaung galaxy note9' screen.
Click to expand...
Click to collapse
your initial issue was that you DIDINT format data when you first flashed twrp. please read dr.ketans guide in the guides and discussion thread.
when the phone reboots by holding vold down and power, very very quickly swap to the DL button combo(vol down + bixby) and plug cable. reflash twrp 3.2.0.0 and follow the instructions. ( when odin fisnishes flashing twrp in the AP slot, DONT let phone boot to home screen or at all. immediately hold vol up +bixby +pwr to enter twrp recovery. then swipe to allow modification and go directly to wipe menu and format data. type yes when asked. go to reboot menu and choose reboot to recovery and flash
N960F_DS_N_PIE_Root_for_OEM_issue_devices_V5.zip)
again please read the guide attentively

jd14771 said:
follow these steps, you must be fast and diligent with the button combinations:
-first, plug phone into computer
-Second, HOLD POWER + VOLUME DOWN until device restarts, as SOON as the screen goes black you must let go of all buttons and immediately hold VOLUME DOWN + BIXBY
-you should be in download mode.
the phone has to be OFF and plugged into a computer BEFORE you hold VOLUME DOWN + BiXBY in order to enter download mode. You can not trigger this while the phone is on.
Click to expand...
Click to collapse
Thank you so much! it is worked!
I am in download mode.
now I will install the twrp again.

bober10113 said:
your initial issue was that you DIDINT format data when you first flashed twrp. please read dr.ketans guide in the guides and discussion thread.
leave cable plugged it.
when the phone reboots by holding vold down and power, very very quickly swap to the DL button combo(vol down + bixby). reflash twrp 3.2.0.0 and follow the instructions. ( when odin fisnishes flashing twrp in the AP slot, DONT let phone boot to home screen or at all. immediately hold vol up +bixby +pwr to enter twrp recovery. then swipe to allow modification and go directly to wipe menu and format data. type yes when asked. go to reboot menu and choose reboot to recovery and flash
N960F_DS_N_PIE_Root_for_OEM_issue_devices_V5.zip)
again please read the guide attentively
Click to expand...
Click to collapse
thanks, I'm trying now.

Development Unofficial LinageOS recovery for Galaxy M02 SM-M022G

Unofficial LinageOS Recovery​19.1 for M02 SM-M022G​ By Goddamn_srilankan ​
Note:*Experimental release*
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[*]what you need to flash this recovery​
1.Samsung galaxy M02 SM-M022G / DS (Build number:M022GXXU2BUK3 | Baseband version:M022GXXU2BUJ4)​​2.Unlocked bootloader (important)​​3.ODIN flash tool with SAMSUNG usb drivers & adb drivers installed​​4.Battery fully charged.​​5.SamFwFRPTool and you should disable FRP & Knox (This will fix couple of errors in download mode).​​6.Please download the stock recovey.zip because you will need to flash it if something goes wrong with this recovery.(Rolling back to stock recovery)​
[*]How to put your phone in Download mode​
1.Turn off your phone and press vol up + vol down and plug the usb cable at the same time.​
[*]How to flash​
1.Go to ODIN and select recovery.tar from AP. (IMPORTANT: It's AP). Hit the flash button. auto reboot option doesn't matter at all but enabling is easier to reboot.​
[*]How to boot into recovery (Read this carefully. it's important)​
Once you have hit the flash button, your phone will be rebooting to where SAMSUNG logo and custom binaries warning displaying. Then it will automatically rebooting to the same spot.​​what you need to do is keep pressing VOL DOWN + BIXBY (POWER BUTTON) till it turn off (BLACK SCREEN) and QUICKLY lift your fingers and start keep pressing VOL UP + BIXBY till it reboot to the SAMSUNG LOGO SCREEN and release only the BIXBY (POWER BUTTON). Not VOL UP button. You should keep pressing VOL UP after you lift your finger from BIXBY for couple of seconds.​
[*]How long time will it take to boot into custom recovery​
It will be take 1 to 2 minutes to boot into custom recovery. you should be waiting and your device will stay at SAMSUNG LOGO SCREEN till it boot to the custom recovery. that's it, have fun.​​Tip: Try some ADB Sideload method to flash Linage OS ROM (I'll upload ported ROM)​
[*]Rolling back to stock recovery (Flashing stock recovery)​
If you are in Linage OS Recovery, click to shutdown or poweroff button to turn off your device. then press VOL UP + VOL DOWN (keep pressing) & connect your USB CABLE to put your device in download mode. Go to ODIN flash tool and select recovery.tar file from your stock recovery extracted folder into ODIN AP section (Important: It's AP). Hit the flash button and your device will be normally rebooting into boot & your stock OS.​​If you are in auto rebooting, you must remember this you always have your chance to get into download mode by pressing VOL UP + VOL DOWN & plugging USB CABLE when it came to black screen before the auto restarting attempt. also you can manually keep pressing VOL DOWN + BIXBY till it comes to black screen and QUICKLY PRESS VOL UP + VOL DOWN & PLUG THE USB CABLE before the black screen turn back to restart. (IMPORTANT: QUICKLY)​
LinageOS Source from:
LineageOS – LineageOS Android Distribution
LineageOS Android Distribution
lineageos.org