Development Unofficial LinageOS recovery for Galaxy M02 SM-M022G - Samsung Galaxy M02s

Unofficial LinageOS Recovery​19.1 for M02 SM-M022G​ By Goddamn_srilankan ​
Note:*Experimental release*
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[*]what you need to flash this recovery​
1.Samsung galaxy M02 SM-M022G / DS (Build number:M022GXXU2BUK3 | Baseband version:M022GXXU2BUJ4)​​2.Unlocked bootloader (important)​​3.ODIN flash tool with SAMSUNG usb drivers & adb drivers installed​​4.Battery fully charged.​​5.SamFwFRPTool and you should disable FRP & Knox (This will fix couple of errors in download mode).​​6.Please download the stock recovey.zip because you will need to flash it if something goes wrong with this recovery.(Rolling back to stock recovery)​
[*]How to put your phone in Download mode​
1.Turn off your phone and press vol up + vol down and plug the usb cable at the same time.​
[*]How to flash​
1.Go to ODIN and select recovery.tar from AP. (IMPORTANT: It's AP). Hit the flash button. auto reboot option doesn't matter at all but enabling is easier to reboot.​
[*]How to boot into recovery (Read this carefully. it's important)​
Once you have hit the flash button, your phone will be rebooting to where SAMSUNG logo and custom binaries warning displaying. Then it will automatically rebooting to the same spot.​​what you need to do is keep pressing VOL DOWN + BIXBY (POWER BUTTON) till it turn off (BLACK SCREEN) and QUICKLY lift your fingers and start keep pressing VOL UP + BIXBY till it reboot to the SAMSUNG LOGO SCREEN and release only the BIXBY (POWER BUTTON). Not VOL UP button. You should keep pressing VOL UP after you lift your finger from BIXBY for couple of seconds.​
[*]How long time will it take to boot into custom recovery​
It will be take 1 to 2 minutes to boot into custom recovery. you should be waiting and your device will stay at SAMSUNG LOGO SCREEN till it boot to the custom recovery. that's it, have fun.​​Tip: Try some ADB Sideload method to flash Linage OS ROM (I'll upload ported ROM)​
[*]Rolling back to stock recovery (Flashing stock recovery)​
If you are in Linage OS Recovery, click to shutdown or poweroff button to turn off your device. then press VOL UP + VOL DOWN (keep pressing) & connect your USB CABLE to put your device in download mode. Go to ODIN flash tool and select recovery.tar file from your stock recovery extracted folder into ODIN AP section (Important: It's AP). Hit the flash button and your device will be normally rebooting into boot & your stock OS.​​If you are in auto rebooting, you must remember this you always have your chance to get into download mode by pressing VOL UP + VOL DOWN & plugging USB CABLE when it came to black screen before the auto restarting attempt. also you can manually keep pressing VOL DOWN + BIXBY till it comes to black screen and QUICKLY PRESS VOL UP + VOL DOWN & PLUG THE USB CABLE before the black screen turn back to restart. (IMPORTANT: QUICKLY)​
LinageOS Source from:
LineageOS – LineageOS Android Distribution
LineageOS Android Distribution
lineageos.org

Related

[Q] My galaxy s goes to download mode instead of recovery mode!

My galaxy s goes to download mode instead of recovery mode when i hold the three buttons. No usb cable is connected. I really need to fix this. can somebody help?
you're holding volume up right?
If not, do so! If yes, try the Down to see if you get in download mode.
t1mman said:
you're holding volume up right?
If not, do so! If yes, try the Down to see if you get in download mode.
Click to expand...
Click to collapse
it goes to download mode. i need recovery. thats a new issue
kayvanmsh said:
My galaxy s goes to download mode instead of recovery mode when i hold the three buttons. No usb cable is connected. I really need to fix this. can somebody help?
Click to expand...
Click to collapse
I strongly believe you hold the wrong button combination, buddy.
Hold Vol UP + Home + Power button,
release all 3 buttons when you see the I9000 screen
Roy Ngan said:
I strongly believe you hold the wrong button combination, buddy.
Hold Vol UP + Home + Power button,
release all 3 buttons when you see the I9000 screen
Click to expand...
Click to collapse
when i hold those 3 it doesn't go recovery. it just normally boots
Hold em until the samsung logo flashes (shows then blank then shows again) then release ONLY the power.
kayvanmsh said:
when i hold those 3 it doesn't go recovery. it just normally boots
Click to expand...
Click to collapse
if you can't get into neither download nor recovery mode, you need a 3 button fix. BUT before you do that, Please double confirm that you can't enter both modes.
http://forum.xda-developers.com/showthread.php?t=785201&highlight=button
btw, download mode and recovery mode looks like this, can you see both?
Volume DOWN + HOME + Power -> Download mode
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Volume Up + HOME + Power -> Recovery mode

[Q] Unable to bootafter aborted lollipop update. (moto g 1068 DS)

Hi,
After getting the lollipop update notice, i downloaded and tried installing the same. But after reboot at about 2/3rd installation of new system it aborted with no error at an icon with dead android. This icon persisted for a long time and i rebooted the mobile. Now it is stuck at "powered by android" message with no progress.
I have tried so far:
- vol down button and power: Recover option. This gave me no command error.
- vol up button and power: delete /data and /cache. The mobile automatically rebooted and is stuck at the same message - "powered by android"
How I can recover my mobile? either to stock 4.4.4 or 5.0
My cell is stock 4.4.4, dual sim 1068 (Indian version)
Thanks for any help..
I have the same problem as you, have you found any solution yet?
balajid said:
Hi,
After getting the lollipop update notice, i downloaded and tried installing the same. But after reboot at about 2/3rd installation of new system it aborted with no error at an icon with dead android. This icon persisted for a long time and i rebooted the mobile. Now it is stuck at "powered by android" message with no progress.
I have tried so far:
- vol down button and power: Recover option. This gave me no command error.
- vol up button and power: delete /data and /cache. The mobile automatically rebooted and is stuck at the same message - "powered by android"
How I can recover my mobile? either to stock 4.4.4 or 5.0
My cell is stock 4.4.4, dual sim 1068 (Indian version)
Thanks for any help..
Click to expand...
Click to collapse
If you can get to fastboot mode by holding power and volume down till screen goes blank -- count 1,2,3,4,5 release both and recovery should come up.
run my installer in signature, ignore device not found and hopefully it will flash your xt1068
mile18 said:
I have the same problem as you, have you found any solution yet?
Click to expand...
Click to collapse
External Reset
If you are unable to access the phone's menu to perform the standard reset you can attempt an external factory reset.
Notes:
When using this feature; everything is deleted from the device.
Reset will require a minimum battery level of 25%. If you are unable to perform a reset, please charge for 20-30 minutes and try reset again.
1. With the phone powered off, press the VOL DOWN KEY for 2-3 seconds then POWER key then release.
2. The device will display different BOOT OPTIONS (THIS IS BOOTLOADER SCREEN)
2A GOTO 3 TO RESET OR RUN MY SCRIPT FROM SIGNATURE ( YOUR CHOICE)
3. Use the VOL DOWN Key to SCROLL to Recovery and VOL UP Key to select
Tip: If the device reboots, you may have waited to long to make a selection, you will need to begin the process again.
4. The device will display the Motorola logo and then the Android in distress ( logo with Exclamation mark)
5. Press and hold the VOL UP key for 10-15 seconds. While still holding the VOL UP key tap and release the POWER key
Tip: You can try this step, holding the phone in landscape. If you are stuck on step 6, try a force reboot by pressing the Power key and Vol Down key, and start the process again.
6. The device will display additional menu options (Text will appear in BLUE)
7. Use the VOL DOWN Key to scroll to Wipe data / factory reset and the POWER Key to select this option
8. Use the VOL DOWN key again to select YES - delete all user data and press the POWER key to CONFIRM
9. Once the Formatting is complete, press the POWER key to confirm a REBOOT
10. The device will reboot and start the normal power up sequence
stock firmware is now available flash firmware.
[email protected] said:
stock firmware is now available flash firmware.
Click to expand...
Click to collapse
Can you please tell me from where I can download stock 5.0.2 rom ?
Now I'm using this one but i want to make a clean install and I'm looking for a zip close to this.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Would it be possible to flash it with TWRP ?
epivitor said:
Can you please tell me from where I can download stock 5.0.2 rom ?
Now I'm using this one but i want to make a clean install and I'm looking for a zip close to this.
Would it be possible to flash it with TWRP ?
Click to expand...
Click to collapse
here u go: http://forum.xda-developers.com/moto-g-2014/general/official-stock-firmware-t3018682

Huawei Ascend P7 - bootloop singular problem :(

Hello, my Huawei P7 during automatic update does not start up again. I can't go into download mode or fastboot . I have tried all ways , with the attached USB cable , pressing pwr + vol up, vol down + pwr , pwr + vol up and down . Always returns to the same place: Software install failed!
I managed to use this instruction (http://www.carbontesla.com/2015/07/guide-restore-ascend-p7-b805-lollipop-to-b609-kitkat-firmware/) to do downgrade using the transition pack , then downgrade to the B609 and unlock bootloader according to the instructions (http://forum.xda-developers.com/ascend-p7/general/unlock-bootloader-huawei-ascend-p7-l10-t2830641)
Everything I've done via SD card by force update
After bootloader unlock
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Just trying to get fastboot or download mode by pressing pwr + vol-
https://www.youtube.com/watch?v=Ba0CcdiXQj0
pwr + vol+
https://www.youtube.com/watch?v=OaVlNfwtxKs
racesupport said:
Hello, my Huawei P7 during automatic update does not start up again. I can't go into download mode or fastboot . I have tried all ways , with the attached USB cable , pressing pwr + vol up, vol down + pwr , pwr + vol up and down . Always returns to the same place: Software install failed!
I managed to use this instruction (http://www.carbontesla.com/2015/07/guide-restore-ascend-p7-b805-lollipop-to-b609-kitkat-firmware/) to do downgrade using the transition pack , then downgrade to the B609 and unlock bootloader according to the instructions (http://forum.xda-developers.com/ascend-p7/general/unlock-bootloader-huawei-ascend-p7-l10-t2830641)
Everything I've done via SD card by force update
After bootloader unlock
Just trying to get fastboot or download mode by pressing pwr + vol-
https://www.youtube.com/watch?v=Ba0CcdiXQj0
pwr + vol+
https://www.youtube.com/watch?v=OaVlNfwtxKs
Click to expand...
Click to collapse
Have you thought of taking it to the repair shop? Because I'm thinking that this might be more than just a software problem.
TheSproker said:
Have you thought of taking it to the repair shop? Because I'm thinking that this might be more than just a software problem.
Click to expand...
Click to collapse
I think so too but first I wanted to try to somehow rescue... no results
racesupport said:
Hello, my Huawei P7 during automatic update does not start up again. I can't go into download mode or fastboot . I have tried all ways , with the attached USB cable , pressing pwr + vol up, vol down + pwr , pwr + vol up and down . Always returns to the same place: Software install failed!
I managed to use this instruction (http://www.carbontesla.com/2015/07/guide-restore-ascend-p7-b805-lollipop-to-b609-kitkat-firmware/) to do downgrade using the transition pack , then downgrade to the B609 and unlock bootloader according to the instructions (http://forum.xda-developers.com/ascend-p7/general/unlock-bootloader-huawei-ascend-p7-l10-t2830641)
Everything I've done via SD card by force update
After bootloader unlock
Just trying to get fastboot or download mode by pressing pwr + vol-
https://www.youtube.com/watch?v=Ba0CcdiXQj0
pwr + vol+
https://www.youtube.com/watch?v=OaVlNfwtxKs
Click to expand...
Click to collapse
Hi!
Try to get into bootloader mode WITHOUT any usb cable. If you do not get into bootloader, upload a video. I think there is a chance your phone is not dead
https://www.youtube.com/watch?v=flVRtOqIYU4
try to install b800 again
how is the battery? (charged ?)
Just downloading HUAWEI_Sophia-L10C900B839_Firmware_Europe_Android5.1.1_EMUI3.1.zip
Battery fine, charged to 100%
Ps
Phone is after update, still this same screen "software install failed"
During the update phone was restart after 19% and start updating again.
Dead?
Thanks for any help. I think thread is exhausted and phone Is dead as well.

The phone stuck after trying to install rom

Hello! I have tried to install the THE GALAXY PROJECT rom
first I intalled TWRP
I try to wipe the phone and I got a massage:
"failed to mount data internal"
afterwards I anyway tried to intalled the rom and after the Installation done the phone try to reboot and failed. I got some massage about permission and with botton to reboot, and I clicked.
anyway now my phone stuck on circle with lightning.
I try to enter recovery mode or download mode and didn't make it.
please help.
(sorry for my english, I'm not a native)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
jd14771 said:
At some point, the Download mode trigger as changed.
to get download mode:
-Turn phone OFF
-HOLD VOLUME DOWN + BIXBY
-Plug phone into computer with USB cable while HOLDING the above BUTTONS.
-You should be in Download Mode.
Click to expand...
Click to collapse
thank you.
before I saw you comment I click on POWER + BOTTON DOWN.
now my phone stuck on the first screen (samaung galaxy note9..)
I want to try you suggestion but how I turn the phone OFF? he stuck on screen.
also I'm trying to Hold VOLUME DOWN + BIXBY and connect the cable like you said and nothing happened..
if I holding VOLUME DOWN + BIXBY + POWER the screen changed to black for second and again show me the 'samaung galaxy note9' screen.
yamar8 said:
thank you.
before I saw you comment I click on POWER + BOTTON DOWN.
now my phone stuck on the first screen (samaung galaxy note9..)
I want to try you suggestion but how I turn the phone OFF? he stuck on screen.
also I'm trying to Hold VOLUME DOWN + BIXBY and connect the cable like you said and nothing happened..
if I holding VOLUME DOWN + BIXBY + POWER the screen changed to black for second and again show me the 'samaung galaxy note9' screen.
Click to expand...
Click to collapse
your initial issue was that you DIDINT format data when you first flashed twrp. please read dr.ketans guide in the guides and discussion thread.
when the phone reboots by holding vold down and power, very very quickly swap to the DL button combo(vol down + bixby) and plug cable. reflash twrp 3.2.0.0 and follow the instructions. ( when odin fisnishes flashing twrp in the AP slot, DONT let phone boot to home screen or at all. immediately hold vol up +bixby +pwr to enter twrp recovery. then swipe to allow modification and go directly to wipe menu and format data. type yes when asked. go to reboot menu and choose reboot to recovery and flash
N960F_DS_N_PIE_Root_for_OEM_issue_devices_V5.zip)
again please read the guide attentively
jd14771 said:
follow these steps, you must be fast and diligent with the button combinations:
-first, plug phone into computer
-Second, HOLD POWER + VOLUME DOWN until device restarts, as SOON as the screen goes black you must let go of all buttons and immediately hold VOLUME DOWN + BIXBY
-you should be in download mode.
the phone has to be OFF and plugged into a computer BEFORE you hold VOLUME DOWN + BiXBY in order to enter download mode. You can not trigger this while the phone is on.
Click to expand...
Click to collapse
Thank you so much! it is worked!
I am in download mode.
now I will install the twrp again.
bober10113 said:
your initial issue was that you DIDINT format data when you first flashed twrp. please read dr.ketans guide in the guides and discussion thread.
leave cable plugged it.
when the phone reboots by holding vold down and power, very very quickly swap to the DL button combo(vol down + bixby). reflash twrp 3.2.0.0 and follow the instructions. ( when odin fisnishes flashing twrp in the AP slot, DONT let phone boot to home screen or at all. immediately hold vol up +bixby +pwr to enter twrp recovery. then swipe to allow modification and go directly to wipe menu and format data. type yes when asked. go to reboot menu and choose reboot to recovery and flash
N960F_DS_N_PIE_Root_for_OEM_issue_devices_V5.zip)
again please read the guide attentively
Click to expand...
Click to collapse
thanks, I'm trying now.

Samsung Galaxy A6 boot stuck

My phone is stuck at "SAMSUNG Galaxy A6 powered by android" screen.
Pressing Volume Down + Power for 7 seconds restarts the phone but it still gets stuck.
I can get into TWRP, but the touchscreen isn't working. Pressing Volume Down + Power for 7 seconds – again – restarts the phone back to "SAMSUNG Galaxy A6 powered by android" screen. After about 15 minutes it enters TWRP. UPDATE – 5 hours later, it only takes 5 seconds to enter TWRP. So now I'm stuck in TWRP.
I want to get into Download Mode to install stock rom. But 1st I need to power off the phone. How do I shut it down?
SOLUTION
While in TWRP recovery mode I connected the phone to PC and used the command:
adb reboot download
Then I used Odin3 to flash stock ROM.
But the touchscreen remains unresponsive; probably because of water damage. I will never ride my bike in the rain without proper phone protection.
q-l-p said:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
My phone is stuck at "SAMSUNG Galaxy A6 powered by android" screen.
Pressing Volume Down + Power for 7 seconds restarts the phone but it still gets stuck.
I can get into TWRP but the touchscreen isn't working. Pressing Volume Down + Power for 7 seconds – again – restarts the phone back to "SAMSUNG Galaxy A6 powered by android" screen. After about 15 minutes it enters TWRP.
I want to get into Download Mode to install stock rom. But 1st I need to power off the phone. How do I shut it down?
Click to expand...
Click to collapse
If you can get to twrp, click reboot then Power Off. Then Press Vol Up and Down then connect USB cable to your PC or Laptop.

Categories

Resources