Related
Hello all,
I got a Xperia T, with firmware 7.0.A.3.195.
Now i want root acces for it but there isn't exploid for it yet.
Now i can unlock the bootloader but i dont want to becouse of the warranty of the phone.
And love the stock rom.
Is there any change in the future of getting root acces on the stock firmware?
Greetings
(excuse me for the rusty English)
Notopic1 said:
Hello all,
I got a Xperia T, with firmware 7.0.A.3.195.
Now i want root acces for it but there isn't exploid for it yet.
Now i can unlock the bootloader but i dont want to becouse of the warranty of the phone.
And love the stock rom.
Is there any change in the future of getting root acces on the stock firmware?
Greetings
(excuse me for the rusty English)
Click to expand...
Click to collapse
Flash a stock generic 303 firmware, found in the all in one thread.
Root using bin4rys method.
Then follow the thread for keeping root on an OTA update,
But first, read the all in ine thread, its the very first thread in this section.
But you can't flash anything with out x recovery and root acces i always thought?
I will read the topic's again.
Thx in advanced
Notopic1 said:
But you can't flash anything with out x recovery and root acces i always thought?
I will read the topic's again.
Thx in advanced
Click to expand...
Click to collapse
No,
You can always use flashtool to flash a stock ftf no matter on root status. Read the thread.
There are several threads on how to root 195 firmware.
Root access is not automatic, xperia phones do not come rooted, you have to do it yourself
I know how it al works, with the x10.
Now i have a Xperia T but cant find the drivers.
Flashtool is asking about the drivers, and i did install al of them.
But there is no T drivers.
Isn't there a tutorial or something what i can read about.
02/016/2012 23:16:45 - ERROR - Drivers need to be installed for connected device.
02/016/2012 23:16:45 - ERROR - You can find them in the drivers folder of Flashtool.
Is it possible to root Xperia TX .197 frimware without unlocking bootloader ?
Teshand said:
Is it possible to root Xperia TX .197 frimware without unlocking bootloader ?
Click to expand...
Click to collapse
yes, but not directly, there are plenty of guides in the general section.
It basically involves downgrading to 303, rooting and then doing an OTA update to 195.
gregbradley said:
yes, but not directly, there are plenty of guides in the general section.
It basically involves downgrading to 303, rooting and then doing an OTA update to 195.
Click to expand...
Click to collapse
Is this from this thread "[HOW TO] KEEP ROOT on 7.0.A.3.195 FW via OTA Update by black97one]" in the general section ?
Thanks and best regards
Teshand said:
Is this from this thread "[HOW TO] KEEP ROOT on 7.0.A.3.195 FW via OTA Update by black97one]" in the general section ?
Thanks and best regards
Click to expand...
Click to collapse
yes, that is one way, there are other ways. Read the "Root" section in post 2 of the all in one thread. Link is in my signature
Notopic1 said:
I know how it al works, with the x10.
Now i have a Xperia T but cant find the drivers.
Flashtool is asking about the drivers, and i did install al of them.
But there is no T drivers.
Isn't there a tutorial or something what i can read about.
02/016/2012 23:16:45 - ERROR - Drivers need to be installed for connected device.
02/016/2012 23:16:45 - ERROR - You can find them in the drivers folder of Flashtool.
Click to expand...
Click to collapse
I had problems first time around (using Flashtool). I had to install ALL the drivers regardless of device and set my phone into mass storage mode with USB debugging on to get it to work.
If I helped hit thanks!
emuX said:
I had problems first time around (using Flashtool). I had to install ALL the drivers regardless of device and set my phone into mass storage mode with USB debugging on to get it to work.
If I helped hit thanks!
Click to expand...
Click to collapse
Install both Flashtoll driver and TX driver was fine for me (done with 0.9.8.0 version).
Something else I've discovered (since I re-flashed stock firmware again today on a different PC) is that the phone drivers often don't initialise in time if using latest Windows OS (Win 7 in my case) since the PC looks online for drivers before trying the installed ones.
Clicking the new hardware wizard icon and skipping the Windows Update drivers check got the phone recognised.
If I helped hit thanks!
Tanks all for the answers.
But i did al you all said but nothing is working.
I did install pc companion again.
Installed al the drivers.
And stil the same error.
03/055/2012 23:55:20 - ERROR - Drivers need to be installed for connected device.
03/055/2012 23:55:20 - ERROR - You can find them in the drivers folder of Flashtool.
I dont get it??
Edit: found the problem.
I did use vol button up.
Bud needed to use vol button down.
Hey guys,
I have been trying to root my Xperia Z (10.3.1.A.2.67) for the past three hours now with no success..
I followed this guide: www android gs/root-xperia-z-stock-10-3-1-a-0-2442-67-firmware/ and am now stuck at step 3 of the actual rooting (not the preparation). I cannot seem to find how I can flash the custom kernel to my phone using Emma.
I have googled around for a while and found that I can add services to Emma using the tools menu, too bad I don't have one: prntscr com/23psmy
I would love to root my phone or at least get my own kernel thingy back D:
cascer1 said:
Hey guys,
I have been trying to root my Xperia Z (10.3.1.A.2.67) for the past three hours now with no success..
I followed this guide: www android gs/root-xperia-z-stock-10-3-1-a-0-2442-67-firmware/ and am now stuck at step 3 of the actual rooting (not the preparation). I cannot seem to find how I can flash the custom kernel to my phone using Emma.
I have googled around for a while and found that I can add services to Emma using the tools menu, too bad I don't have one: prntscr com/23psmy
I would love to root my phone or at least get my own kernel thingy back D:
Click to expand...
Click to collapse
Use flashtool Here is the link. Follow this thread to root http://forum.xda-developers.com/showthread.php?t=2327472
rockstar-z said:
Use flashtool Here is the link. Follow this thread to root http://forum.xda-developers.com/showthread.php?t=2327472
Click to expand...
Click to collapse
This flash tool doesn't seem to work on Windows 8? I already tried compatibility mode for Win7 and XP: http://prntscr.com/23pwfw
cascer1 said:
This flash tool doesn't seem to work on Windows 8? I already tried compatibility mode for Win7 and XP: http://prntscr.com/23pwfw
Click to expand...
Click to collapse
See the part 2 of this link http://forum.xda-developers.com/showthread.php?t=2240614 there are steps to install the drivers in windows 8
and follow this link http://forum.xda-developers.com/showthread.php?t=2386405 to root
rockstar-z said:
See the part 2 of this link http://forum.xda-developers.com/showthread.php?t=2240614 there are steps to install the drivers in windows 8
and follow this link http://forum.xda-developers.com/showthread.php?t=2386405 to root
Click to expand...
Click to collapse
I can't find the solution to my problem in there, I cannot run flashtool for some reason.
rockstar-z said:
See the part 2 of this link http://forum.xda-developers.com/showthread.php?t=2240614 there are steps to install the drivers in windows 8
and follow this link http://forum.xda-developers.com/showthread.php?t=2386405 to root
Click to expand...
Click to collapse
It seems that flashtool is a 16 bit programme, and windows 8 x64 does not support anything below 32 bit D:
Of course Flashtool work on W8.
DrKrFfXx said:
Of course Flashtool work on W8.
Click to expand...
Click to collapse
Please tell me how, because I've been trying everything I can think of (compatibility mode, run as admin..) but it keeps giving me the same error "This app can't run on your PC"!
I've been trying for a total of five hours now and it's starting to piss me off... Need to go soon and don't want to walk around with a resetted and unrooted phone all day tomorrow :\
cascer1 said:
Please tell me how, because I've been trying everything I can think of (compatibility mode, run as admin..) but it keeps giving me the same error "This app can't run on your PC"!
I've been trying for a total of five hours now and it's starting to piss me off... Need to go soon and don't want to walk around with a resetted and unrooted phone all day tomorrow :\
Click to expand...
Click to collapse
Do you have Java Runtime Enviroment installed?
DrKrFfXx said:
Do you have Java Runtime Enviroment installed?
Click to expand...
Click to collapse
Yup, and I've never even had this error before: http://prntscr.com/23qkdm
You downloaded Flashtools from here, right?
http://www.flashtool.net/download.php
One thing to consider is that Emma Flashtool is NOT Flashtools.
You CANNOT flash custom kernels from Emma.
DrKrFfXx said:
You downloaded Flashtools from here, right?
http://www.flashtool.net/download.php
One thing to consider is that Emma Flashtool is NOT Flashtools.
You CANNOT flash custom kernels from Emma.
Click to expand...
Click to collapse
I have, and it does NOT work, tried every windows version in there, not a single one worked. Tried restarting, safe mode, compatibility mode, admin mode and restarting again. It's been way too long now and I'm just giving up. This went so much easier with my S3...
I'll try again tomorrow if I feel like it but if I have to go through all this freaking trouble I don't think it'll be worth it..
Can anyone please help my with this? Because I don't want to have a reset phone that hasn't even been rooted..
Download it again and check the MD5 of the file you downloaded. As a quick check, the file should be around 112MB.
Something is definitely wrong, as there are many people using Flashtool on Windows 8 without issues and it is definitely not a 16 bit application (32 and 64 bit executables are installed).
Sent from my C6603 using Tapatalk
kingvortex said:
Download it again and check the MD5 of the file you downloaded. As a quick check, the file should be around 112MB.
Something is definitely wrong, as there are many people using Flashtool on Windows 8 without issues and it is definitely not a 16 bit application (32 and 64 bit executables are installed).
Sent from my C6603 using Tapatalk
Click to expand...
Click to collapse
Alright I got it to work now. However, I get the following error when trying to flash another kernel:
13/016/2013 21:16:11 - INFO - Please unplug and start your phone
13/016/2013 21:16:11 - INFO - For flashtool, Unknown Sources and Debugging must be checked in phone settings
13/016/2013 21:16:11 - INFO - Device connected in flash mode
Click to expand...
Click to collapse
I enabled debugging and unknown sources and held my flash button (volume down) while plugging in my phone again. (Also tried volume up) Neither one worked.
The only thing that changed is that my wifi won't enable anymore.
This is my log: http://pastebin.com/huG9cP41
That might be useful
cascer1 said:
This is my log: http://pastebin.com/huG9cP41
That might be useful
Click to expand...
Click to collapse
Can't see any errors. Looks like a clean kernel flash.
What's exactly the error? You lacking wifi? Are you using a custom kernel like DooMLord's?
For wifi to work on Doom's kernel you have to flash the kernel.zip from recovery.
cascer1 said:
This is my log: http://pastebin.com/huG9cP41
That might be useful
Click to expand...
Click to collapse
I also don't see any errors. Don't worry about wifi not working. You should only be running with the old kernel long enough to root, so it doesn't matter.
Root using DooMLoRD's script, flash your original kernel back and you're done.
kingvortex said:
I also don't see any errors. Don't worry about wifi not working. You should only be running with the old kernel long enough to root, so it doesn't matter.
Root using DooMLoRD's script, flash your original kernel back and you're done.
Click to expand...
Click to collapse
I know it should work, but my phone (settings -> about phone) still shows the old version ..
Have you actually tried to root? I never even checked in About phone after flashing the kernel. I just booted the phone and rooted it.
Sent from my C6603 using Tapatalk
Hi all,
I have a c6903 Z1 currently on Kitkat 4.4.2 (after an OTA update I really wish I'd never done) and I want to root it so I can install the SD card permission fix - can't put up with not being able to write to external SD, it's infuriating. If I can fix that, I can probably put up with KitKat.
If I'm still not happy with that then I want to go back to 4.3
Having read a lot, and I mean pages, and pages, about it, and having to downgrade, I've picked up that I would have to use NUT's .534 ftf to avoid losing the IMEI, and then I was going to root with vRoot.
Does anyone know, does that install Superuser or will I need the Superuser zip too?
At that point I want to then install recovery, so I'm looking at NUT's Z1 Locked Dual Recovery.
I rekon that should all be fine.
To get it back on KitKat I should then put the 757 zip on my SD card and flash in recovery, reboot and flash the stripped ftf with Flashtool, along with the recovery again.
If I still don't like it, I could then just repeat the above, but with the .136 zip and stripped ftf.
Am I thinking right here?
The only thing that's a bit worrying is that, for example, the .136 update thread says to come from .290.
Is this so, do I have to install that first, or can I go straight from the newly rooted .534 directly?
Sorry if this has been answered before, but my eyes are killing me staring at this screen now.
The only other thing I'm thinking is to just not root, and simply flash a Jelly Bean full ftf.
I'd rather have root and recovery though.
Thanks,
Mick.
wow, you didn't read much
DO NOT USE VROOT, IT SEND YOUR IMEI TO AN IP ADDRESS IN CHINA.
To get root on 757, just follow the step sin my signature
No need to use any root methods or unlock the bootloader
3 steps, 5 minutes work max.... a bit longer if you have slow download speeds
gregbradley said:
wow, you didn't read much
DO NOT USE VROOT, IT SEND YOUR IMEI TO AN IP ADDRESS IN CHINA.
To get root on 757, just follow the step sin my signature
No need to use any root methods or unlock the bootloader
3 steps, 5 minutes work max.... a bit longer if you have slow download speeds
Click to expand...
Click to collapse
Just wasn't looking in the right places, so it seems.There is an awful lot of info on here though, and one link leads to another, however very informative reading.
Thank you so much for your help, don't mean to be a pain, and I do appreciate it.
All you guys do an amazing job.
Will it make any difference if I use the Z1 locked recovery instead of the XZ one, or should I just use the XZ anyway? Does it matter?
MickieH said:
Just wasn't looking in the right places, so it seems.There is an awful lot of info on here though, and one link leads to another, however very informative reading.
Thank you so much for your help, don't mean to be a pain, and I do appreciate it.
All you guys do an amazing job.
Will it make any difference if I use the Z1 locked recovery instead of the XZ one, or should I just use the XZ anyway? Does it matter?
Click to expand...
Click to collapse
download the file for the Z1 from [NUT]s page since that one is for this phone.
the XZ is for the xperia Z and that is a different phone. It is always advisable to download and flash things that are deigned/made for the phone you have, not another phone....
u don't need to install the 290 version first, get nut's 534 stock, then install dualrecovery and go straight with the 136 one.
Check nut's instructions or use this youtube video which is foolprove.
youtube.com/watch?v=1aq9YTlfCgc
help
I have an unrooted sony Xperia z1 (C6902), and I want to have the timeshift video and 4k video recording features on my phone, please help me out,
I don't want to loose my warranty,
Tried to install z2 super camera apps from various threads but didn't worked,
gregbradley said:
download the file for the Z1 from [NUT]s page since that one is for this phone.
the XZ is for the xperia Z and that is a different phone. It is always advisable to download and flash things that are deigned/made for the phone you have, not another phone....
Click to expand...
Click to collapse
Thanks again, and sorry, it does complicate things as I have the Xperia Z and a Z1.
I'll go with the Z1 recovery then.
Your help is greatly appreciated, it really is.
Sometimes you just can't see the fire for the smoke, you know.
Thanks again,
Mick.
MickieH said:
Thanks again, and sorry, it does complicate things as I have the Xperia Z and a Z1.
I'll go with the Z1 recovery then.
Your help is greatly appreciated, it really is.
Sometimes you just can't see the fire for the smoke, you know.
Thanks again,
Mick.
Click to expand...
Click to collapse
I am not sure if we got our wires crossed before.
the XZDR installer will install dual recovery on your phone from PC
the Z1 flashable file will upgrade to the latest version from recovery itself, but will only work on a Z1.
gregbradley said:
I am not sure if we got our wires crossed before.
the XZDR installer will install dual recovery on your phone from PC
the Z1 flashable file will upgrade to the latest version from recovery itself, but will only work on a Z1.
Click to expand...
Click to collapse
Oh, right, well, I've downloaded this installer -> Z1-lockeddualrecovery2.7.123-BETA from NUT's site.
I'll flash NUT's .534 ftf with flashtool first, then I'll run the installer from my lappy, and that should root and install the recovery.
I have also downloaded the Z1-lockeddualrecovery2.7.123-BETA.flashable - I assume that's what I need to flash after flashing another ROM if it doesn't include it's own recovery.
I have noticed some ROMS have earlier version recoveries, like .80, built in. Can I still flash the .123 on to of those with no issues? I have read there had been some issues with flashing over older recoveries.
Has anyone figured out why the IMEI was being lost? Was it due to the baseband
I've already got the drivers installed, in fact I successfully flashed back to .136 just to try it (last flashing I did was on my Arc S, so been a while) last night as I just couldn't be bothered with KitKat anymore.
Thanks again,
Mick.
MickieH said:
I have noticed some ROMS have earlier version recoveries, like .80, built in. Can I still flash the .123 on to of those with no issues? I have read there had been some issues with flashing over older recoveries.
Click to expand...
Click to collapse
If the installation was successfully then it doesn't matter. The older one working well. In the case you want flash the newets one then you have to wipe your phone with a stock FTF.
MickieH said:
Has anyone figured out why the IMEI was being lost? Was it due to the baseband
Click to expand...
Click to collapse
kind of, but don't worry, you will have your IMEI back after upgrade again.
I can open a topic for this question, but i'll just ask it here to prevent extra spam etc hehe.
If i get to a 757 rooted firmware using these methods, and i want to go to a non rooted firmware like 769 if it comes out. Will that be just a matter of reflasing the tft that belongs to that firmware using flashtool, or do i have to make more steps?
Thanks for answering!
saintgein said:
I can open a topic for this question, but i'll just ask it here to prevent extra spam etc hehe.
If i get to a 757 rooted firmware using these methods, and i want to go to a non rooted firmware like 769 if it comes out. Will that be just a matter of reflasing the tft that belongs to that firmware using flashtool, or do i have to make more steps?
Thanks for answering!
Click to expand...
Click to collapse
When 769 will be out then NUT will have Pre-Rooted FTF like the 757, so you will have just to repeat the same steps. If you will want go to 769 Stock then 1 step will be required, flash it via Flashtool.
I want to remind you also that we do not predict future so we don't know what Google will do to they future Firmwares so the steps can be less or more, nobody know it.
Just one more thing, sorry to be a pain.
I'm happy with the process, flash NUT's. 534 ftf, then run the recovery installer to get root and recovery.
I don't want to install a custom rom right now.
I either want to end up on 4.3 with root and recovery, or 4.4.2, root, recovery, and the SD card fix.
If I use the zip and stripped ftf files from NUT's download page, I'll still retain root access, is that right?
Then just reflash the recovery zip before rebooting, and job done?
I've had no issues with the stock .136 firmware I've currently downgraded to other than the NFC icon not appearing when active. Something I've gathered can be fixed by editing the build.prop, but doesn't bother me anyway.
MickieH said:
If I use the zip and stripped ftf files from NUT's download page, I'll still retain root access, is that right?
Click to expand...
Click to collapse
Yes, that's why is called Pre-rooted.
MickieH said:
Then just reflash the recovery zip before rebooting, and job done?
Click to expand...
Click to collapse
No, the Recovery will still there from the first installation, it will not be wiped. After installing zip and strippied files, you will be able to boot into recovery.
eclyptos said:
Yes, that's why is called Pre-rooted.
No, the Recovery will still there from the first installation, it will not be wiped. After installing zip and strippied files, you will be able to boot into recovery.
Click to expand...
Click to collapse
Ok, thank you for your help, I understand now, just needed to be clear before I went ahead.
Better to ask than mess it up.
To get root on 757, just follow the step sin my signature
Where to find steps??
I really am getting confused with a lot of different info, please help with simple instructions.
maid said:
Where to find steps??
I really am getting confused with a lot of different info, please help with simple instructions.
Click to expand...
Click to collapse
Yes, I had the same problem, there's lots of info on here. There's hundreds of pages to read and it can get confusing.
I'll assume your phone hasn't been messed with. i.e. The bootloader is locked, and it's not rooted, and that you're using a Windows PC.
If you have changed your phone, let us know.
Make sure you have USB debugging turned on in your Developer Options, and Unknown sources in the Security settings.
To enable Developer Options in your settings, go to Settings, About phone, and keep taping Build number until it says 'You are now a Developer'
You'll need to download the latest version of Flashtool from here --> http://www.flashtool.net/download.php
You'll need to install the drivers for your phone too. The driver installer is in the flashtool/drivers folder.
Ok, so this is what I've gathered so far :
This is the link to the steps, thanks to gregbradley --> http://forum.xda-developers.com/showpost.php?p=52407809&postcount=2
If you follow those, you'll end up with a rooted phone with whatever stock based rom you fancy.
Now the following are my thoughts, and what I've learned so far, but I'm not an expert.
My advice would be read more, and make sure you feel comfortable with what you are going to do, before you do it.
If you are unsure about anything, ask.
You'll need to use Flashtool to flash your phone.
The second post here,from DoomLord, shows how to connect your phone in flash mode --> http://forum.xda-developers.com/showthread.php?t=2440565 - Basically turn the phone off, then press volume down and connect to the PC via USB when Flashtool tells you to.
I downloaded the .534 ftf from NUT's download page which is here --> http://nut.xperia-files.com/
I downloaded this file --> http://nut.xperia-files.com/?dlid=QzY5MDNfMTQuMS5HLjEuNTM0X1tOVVRdLmZ0Zi50b3JyZW50
You have to download that with your torrent program.
If you don't know how to do that, I've uploaded the ftf to my cloud storage.
You can direct download the .534 ftf here --> https://mega.co.nz/#!mgwkAagR!6_iTB3LwVkGz6yvSaKQsEVPtyaIPq3BJGFCk1EDw9XQ
Place the .534 ftf in the c:/flashtool/firmwares folder
Make sure your phone is fully charged, and back up anything you want keeping, as flashing will wipe your phone.
Now run Flashtool, click the Flash icon (top left) and select the .534 ftf.Flashing the .534 ftf that NUT provided will prevent loss of IMEI.
Don't mess with any settings, and click Flash, and follow the instructions on screen.
That will return your phone to stock 14.1.G.1.534
Download the Z1 Locked Dual Recovery Installer from NUT's page --> http://nut.xperia-files.com/?dlid=WjEtbG9ja2VkZHVhbHJlY292ZXJ5Mi43LjEyMy1CRVRBLmZsYXNoYWJsZS56aXA=
Connect your phone to your PC and run the install.
That will root your phone, and install recovery.
From there you can then install whatever stock based ROM you want.
If you want your phone on KitKat 4.4.2, rooted, with recovery, then download the .757 files from NUT's download page.
You'd need the flashable zip --> http://nut.xperia-files.com/?dlid=QzY5MDNfMTQuMy5BLjAuNzU3LmZsYXNoYWJsZS56aXAudG9ycmVudA==
Download is via torrent.
Flash that zip from recovery.
The stripped part --> http://nut.xperia-files.com/?dlid=QzY5MDNfMTQuMy5BLjAuNzU3X1N0cmlwcGVkLmZ0Zg==
Flash that from Flashtool
That should be it.
Unless your bootloader is unlocked, do not try to flash anything other than stock based roms as it won't work, and will brick your phone.
Hope that helps :good:
MickieH said:
Yes, I had the same problem, there's lots of info on here. There's hundreds of pages to read and it can get confusing.
I'll assume your phone hasn't been messed with. i.e. The bootloader is locked, and it's not rooted, and that you're using a Windows PC.
If you have changed your phone, let us know.
Make sure you have USB debugging turned on in your Developer Options, and Unknown sources in the Security settings.
To enable Developer Options in your settings, go to Settings, About phone, and keep taping Build number until it says 'You are now a Developer'
You'll need to download the latest version of Flashtool from here --> http://www.flashtool.net/download.php
You'll need to install the drivers for your phone too. The driver installer is in the flashtool/drivers folder.
Ok, so this is what I've gathered so far :
This is the link to the steps, thanks to gregbradley --> http://forum.xda-developers.com/showpost.php?p=52407809&postcount=2
If you follow those, you'll end up with a rooted phone with whatever stock based rom you fancy.
Now the following are my thoughts, and what I've learned so far, but I'm not an expert.
My advice would be read more, and make sure you feel comfortable with what you are going to do, before you do it.
If you are unsure about anything, ask.
You'll need to use Flashtool to flash your phone.
The second post here,from DoomLord, shows how to connect your phone in flash mode --> http://forum.xda-developers.com/showthread.php?t=2440565 - Basically turn the phone off, then press volume down and connect to the PC via USB when Flashtool tells you to.
I downloaded the .534 ftf from NUT's download page which is here --> http://nut.xperia-files.com/
I downloaded this file --> http://nut.xperia-files.com/?dlid=QzY5MDNfMTQuMS5HLjEuNTM0X1tOVVRdLmZ0Zi50b3JyZW50
You have to download that with your torrent program.
If you don't know how to do that, I've uploaded the ftf to my cloud storage.
You can direct download the .534 ftf here --> https://mega.co.nz/#!mgwkAagR!6_iTB3LwVkGz6yvSaKQsEVPtyaIPq3BJGFCk1EDw9XQ
Place the .534 ftf in the c:/flashtool/firmwares folder
Make sure your phone is fully charged, and back up anything you want keeping, as flashing will wipe your phone.
Now run Flashtool, click the Flash icon (top left) and select the .534 ftf.Flashing the .534 ftf that NUT provided will prevent loss of IMEI.
Don't mess with any settings, and click Flash, and follow the instructions on screen.
That will return your phone to stock 14.1.G.1.534
Download the Z1 Locked Dual Recovery Installer from NUT's page --> http://nut.xperia-files.com/?dlid=WjEtbG9ja2VkZHVhbHJlY292ZXJ5Mi43LjEyMy1CRVRBLmZsYXNoYWJsZS56aXA=
Connect your phone to your PC and run the install.
That will root your phone, and install recovery.
From there you can then install whatever stock based ROM you want.
If you want your phone on KitKat 4.4.2, rooted, with recovery, then download the .757 files from NUT's download page.
You'd need the flashable zip --> http://nut.xperia-files.com/?dlid=QzY5MDNfMTQuMy5BLjAuNzU3LmZsYXNoYWJsZS56aXAudG9ycmVudA==
Download is via torrent.
Flash that zip from recovery.
The stripped part --> http://nut.xperia-files.com/?dlid=QzY5MDNfMTQuMy5BLjAuNzU3X1N0cmlwcGVkLmZ0Zg==
Flash that from Flashtool
That should be it.
Unless your bootloader is unlocked, do not try to flash anything other than stock based roms as it won't work, and will brick your phone.
Hope that helps :good:
Click to expand...
Click to collapse
Bootloader is unlocked I have flashed firmware before but not rooted.
My main reason for wanting to root was to get rid of apps I dont want like the google ones.
Do you already have a recovery installed?
If not, installing the Z1 locked dual recovery will also root your phone. Just make sure USB debugging is turned on, plug your phone in normally, and click install.
As per my post above, I've just flashed NUT's .534 ftf, booted up, then ran the recovery installer, and it's working well.
I can boot into recovery, and have already done a nandroid backup. Best to do that before anything else.
All I have to do now is choose a rom and flash it.
In all honesty, if your bootloader is unlocked, I'd probably flash a custom kernel which has recovery and root already. I don't know much about flashing with unlocked bootloaders as I don't intend to unlock mine just yet.
Did you backup your TA partition before unlocking?
MickieH said:
Do you already have a recovery installed? No
If not, installing the Z1 locked dual recovery will also root your phone. Just make sure USB debugging is turned on, plug your phone in normally, and click install.
As per my post above, I've just flashed NUT's .534 ftf, booted up, then ran the recovery installer, and it's working well.
I can boot into recovery, and have already done a nandroid backup. Best to do that before anything else.
All I have to do now is choose a rom and flash it.
In all honesty, if your bootloader is unlocked, I'd probably flash a custom kernel which has recovery and root already. I don't know much about flashing with unlocked bootloaders as I don't intend to unlock mine just yet.
Did you backup your TA partition before unlocking?
Click to expand...
Click to collapse
No
If I flash a custom kernel do I just use flashtool?
Hello everyone,
I am new here and I'm having really hard time going around the forums and searching for what I seek and everything is so confusing and I really need someone's help. I've never done this and it terrifies me to screw up my phone. Here's the deal, I want to root my Sony Xperia Z so I can remove the useless built in apps and maybe get a cool theme. I've been looking for threads but there are so many and I don't know which one to take, most talk about some firmware I don't even know what that is but I looked a bit on the internet and found out which is so here are my phone specs:
Sony Xperia Z
C6603
4.3 Jelly Bean
Bootloader unlock allowed: Yes
Firmware thing: 10.4.B.0.569
Any help would be appreciated, thank you so much.
Wrong section buddy. Should be in the q and a section and you can actually ask in the help thread: http://forum.xda-developers.com/showthread.php?t=2345372
I would love to answer your question but I'm on my phone, very limited on what I can do atm.
Sent from my C6603 using XDA Premium 4 mobile app
LitoNi said:
Wrong section buddy. Should be in the q and a section and you can actually ask in the help thread: http://forum.xda-developers.com/showthread.php?t=2345372
I would love to answer your question but I'm on my phone, very limited on what I can do atm.
Sent from my C6603 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Damn, I didn't realize, hopefully a mod will be kind enough to move it. Thank you.
Raptyrox said:
Hello everyone,
I am new here and I'm having really hard time going around the forums and searching for what I seek and everything is so confusing and I really need someone's help. I've never done this and it terrifies me to screw up my phone. Here's the deal, I want to root my Sony Xperia Z so I can remove the useless built in apps and maybe get a cool theme. I've been looking for threads but there are so many and I don't know which one to take, most talk about some firmware I don't even know what that is but I looked a bit on the internet and found out which is so here are my phone specs:
Sony Xperia Z
C6603
4.3 Jelly Bean
Bootloader unlock allowed: Yes
Firmware thing: 10.4.B.0.569
Any help would be appreciated, thank you so much.
Click to expand...
Click to collapse
Welcome to xda where everyone starts off as a noob
Don't worry we all make mistakes hopefully a moderator will move it in the right place.
Now to answer your questions
a) A firmware is the software installed on your device you have got it right in your specs.
b) The method of rooting depends on the firmware. The firmware you have does not allow easy rooting.
You have two options since your bootloader can be unlocked
1) Backup your ta partition using the backup utility and store it on your computer. Unlock your bootloader and root your device by following the guide posted by cookie ninja in the xperia z
android development section
http://forum.xda-developers.com/showthread.php?t=2656698
[GUIDE][ROOT] How to Root 101 Firmware and regain LB
2) Downgrade your firmware to android 4.2.2 by flashing an FTF file using flashtool (you can find these in the development section as well) and then root using doomlords rooting toolkit. You can then upgrade to even android 4.4 by flashing any of the pre rooted roms from the development section.
All the best.
Sent from my C6603 using XDA Free mobile app
Raptyrox said:
Hello everyone,
I am new here and I'm having really hard time going around the forums and searching for what I seek and everything is so confusing and I really need someone's help. I've never done this and it terrifies me to screw up my phone. Here's the deal, I want to root my Sony Xperia Z so I can remove the useless built in apps and maybe get a cool theme. I've been looking for threads but there are so many and I don't know which one to take, most talk about some firmware I don't even know what that is but I looked a bit on the internet and found out which is so here are my phone specs:
Sony Xperia Z
C6603
4.3 Jelly Bean
Bootloader unlock allowed: Yes
Firmware thing: 10.4.B.0.569
Any help would be appreciated, thank you so much.
Click to expand...
Click to collapse
Hi
Welcome to xda
First you cant root 4.3 only if unlock bootloader and the unlock not hard but better try downgrade to 4.2.2:
Download a software called flashtool from here and install it then after install finish go to the place where you install flashtool and find folder called DRIVERS open it and you will find an exe file open it and select xperia z- flashmode drivers - fastboot drivers then install
Get an FTF file for flashtool like that
After the ftf download finish put the ftf file in "frimware" folder in the place you installed flashtool
Open flashtool then click the lighning icon
Select your downloaded FTF
After few minutes you will see screen appear says WAITING FOR FLASH MODE
Turn off you phone
Hold the volume down button then connect your phone with your pc with usb cable
After few minutes you will see your phone downgradedto 4.2.2
THIS WILL DELETE ALL YOU APPS AND DATA IN YOUR PHONE!!! So better make backup!!.the phone must charged to 80%
Now root your device with kingo root this tool not working on 4.3 that why i said must DOWNGRADE
Install CWM and TWRP recovery here
After finish get a PREROOTED ROM like this
Flash it in recovery
Now we finished
Other notes: the flashtool and FTF can repair your phone if bricked so dont panic if that happened just use the lighting icon:angel:
Hit thanks if helped
Raptyrox said:
Hello everyone,
I am new here and I'm having really hard time.......
Any help would be appreciated, thank you so much.
Click to expand...
Click to collapse
Sony smartphones are nearly impossible to hard brick, unless you restored a wrong bootloader TA partition.(the one not from your own device)
The worst case scenario which you can get is total wipeout of every data you have on your phone, so always make a backup of things you need before doing anything.
The things you will need:
1.Basic computer skills
2.Knowing the bootloader of your phone
3.Knowing how to use custom recovery (cwm or twrp)
4.Knowing how to use flashtool
5.Keep a backup of firmware files (ftf) in case anything happen
6.Always check the forum in case the old backup of something of yours won't work in your phone after you updated
Thank you guys, you're all wonderful.
Raptyrox said:
Thank you guys, you're all wonderful.
Click to expand...
Click to collapse
You're welcome bro!:highfive:
androidfreak70 said:
Hi
Welcome to xda
First you cant root 4.3 only if unlock bootloader and the unlock not hard but better try downgrade to 4.2.2:
Download a software called flashtool from here and install it then after install finish go to the place where you install flashtool and find folder called DRIVERS open it and you will find an exe file open it and select xperia z- flashmode drivers - fastboot drivers then install
Get an FTF file for flashtool like that
After the ftf download finish put the ftf file in "frimware" folder in the place you installed flashtool
Open flashtool then click the lighning icon
Select your downloaded FTF
After few minutes you will see screen appear says WAITING FOR FLASH MODE
Turn off you phone
Hold the volume down button then connect your phone with your pc with usb cable
After few minutes you will see your phone downgradedto 4.2.2
THIS WILL DELETE ALL YOU APPS AND DATA IN YOUR PHONE!!! So better make backup!!.the phone must charged to 80%
Now root your device with kingo root this tool not working on 4.3 that why i said must DOWNGRADE
Install CWM and TWRP recovery here
After finish get a PREROOTED ROM like this
Flash it in recovery
Now we finished
Other notes: the flashtool and FTF can repair your phone if bricked so dont panic if that happened just use the lighting icon:angel:
Hit thanks if helped
Click to expand...
Click to collapse
One question, if I root it I can install kitkat? Just as an example.
Raptyrox said:
One question, if I root it I can install kitkat? Just as an example.
Click to expand...
Click to collapse
If you want stock unmodded one you can do it without root. And if you want a rooted with dual recovery you will need root
But I advise you not to use stock kitkat because its lags alot and low battery life
Try those if you want:
Stock no root needed ( flash via flashtool)
Modded and fast with Root and recoveryROOT NEEDED
Thanks!
androidfreak70 said:
Hi
Welcome to xda
First you cant root 4.3 only if unlock bootloader and the unlock not hard but better try downgrade to 4.2.2:
Download a software called flashtool from here and install it then after install finish go to the place where you install flashtool and find folder called DRIVERS open it and you will find an exe file open it and select xperia z- flashmode drivers - fastboot drivers then install
Get an FTF file for flashtool like that
After the ftf download finish put the ftf file in "frimware" folder in the place you installed flashtool
Open flashtool then click the lighning icon
Select your downloaded FTF
After few minutes you will see screen appear says WAITING FOR FLASH MODE
Turn off you phone
Hold the volume down button then connect your phone with your pc with usb cable
After few minutes you will see your phone downgradedto 4.2.2
THIS WILL DELETE ALL YOU APPS AND DATA IN YOUR PHONE!!! So better make backup!!.the phone must charged to 80%
Now root your device with kingo root this tool not working on 4.3 that why i said must DOWNGRADE
Install CWM and TWRP recovery here
After finish get a PREROOTED ROM like this
Flash it in recovery
Now we finished
Other notes: the flashtool and FTF can repair your phone if bricked so dont panic if that happened just use the lighting icon:angel:
Hit thanks if helped
Click to expand...
Click to collapse
This is what has to be done. Took me a while but yeah its worth it at the end.
Obillion said:
This is what has to be done. Took me a while but yeah its worth it at the end.
Click to expand...
Click to collapse
:good::good:
I made the mistake of unlocking my bootloader without making a backup of my TA, so make sure you don't make the same mistake. Not an issue really unless you REALLY want OTA updates.
Sent from my C6603 using Tapatalk
Hi all,
I havnt flashed a device since the first android ROMS for the HTC HD2, so that gives you an idea of how rusty I am, so please bare with me. I've been reading and searching for hours and my eyes feel like they are bleeding so I'm typing this plea for help whle I atill have some vision.
I ve got a c6903 z1 running the latest 5.1.1 update. stock kernel etc, locked bootloader.
I was on 5.02 rooted and now want to root 5.1.1
After lots of reading I realise that I need to downgrade to 4.4.4 kitkat, then root then install dual recovery, then installl a pre rooted 5.1.1... FIRSTLY - Does this sound right? are these the right steps to root 5.1.1?
Secondly, It took me a while finding Generic .108 ftf files but now I've found a few (through the ftf 'mega thread') and dont know which one I need... the options are:
C6903_14.4.A.0.108_1276-7939_R3C Generic MY.ftf 1060174KB
C6903_14.4.A.0.108_Customized KR.ftf 948416KB
C6903_14.4.A.0.108_Customized UK.ftf 1034553KB
C6903_14.4.A.0.108_Generic-MEA_1277-2880_R5C.ftf 1010011KB
C6903_14.4.A.0.108_Generic FR 1276-5833_R5C.ftf 1019704KB
C6903_14.4.A.0.108_Generic IT 1276-0557.ftf 1050780KB
C6903_14.4.A.0.108_Generic RU 1276-7743.ftf 973615KB
C6903_14.4.A.0.108_Generic_SG_1276-7937_R3C.ftf 1048335KB
Will any of these work considering I'm not staying on 4.4.4?
I assumed I could safely use the 'UK' file from the above list but then got paranoid I might brick my z1 by flashing a Ukranian ROM lol.
I've now got 'the fear' and am afraid I might **** this whole process up and brick my device.
which reminds me, one last thing... Ive downloaded the official SONY Flashtool (ver. 0.9.19.8).. is this the right tool for the job? I seem to remember reading that the official flashtool only works on unlocked bootloaders, but I've read so much im confused as hell at this point.
Sorry for the long post,
Any help would be greatly appreciated.
Correct. There is no direct root for 5.1.1 currently. You could also downgrade to 5.0.2 instead, it doesn't really make a difference between that and 4.4.
It doesn't really matter what your interim ROM is as long as you do a clean flash when updating to 5.1.1 again.
Flashtool is the correct tool to be using. It has a utility called XperiFirm built it. You can use that to get any FTF that's publically available so that you don't have to depend on FTF threads.
The only way to have rooted 5.1.1 is with a pre-rooted zip, so you'll have to use PRFCreator to create that zip if there isn't one already posted for the specific variant you want to use.
thesweeney80 said:
Hi all,
I havnt flashed a device since the first android ROMS for the HTC HD2, so that gives you an idea of how rusty I am, so please bare with me. I've been reading and searching for hours and my eyes feel like they are bleeding so I'm typing this plea for help whle I atill have some vision.
I ve got a c6903 z1 running the latest 5.1.1 update. stock kernel etc, locked bootloader.
I was on 5.02 rooted and now want to root 5.1.1
After lots of reading I realise that I need to downgrade to 4.4.4 kitkat, then root then install dual recovery, then installl a pre rooted 5.1.1... FIRSTLY - Does this sound right? are these the right steps to root 5.1.1?
Secondly, It took me a while finding Generic .108 ftf files but now I've found a few (through the ftf 'mega thread') and dont know which one I need... the options are:
C6903_14.4.A.0.108_1276-7939_R3C Generic MY.ftf 1060174KB
C6903_14.4.A.0.108_Customized KR.ftf 948416KB
C6903_14.4.A.0.108_Customized UK.ftf 1034553KB
C6903_14.4.A.0.108_Generic-MEA_1277-2880_R5C.ftf 1010011KB
C6903_14.4.A.0.108_Generic FR 1276-5833_R5C.ftf 1019704KB
C6903_14.4.A.0.108_Generic IT 1276-0557.ftf 1050780KB
C6903_14.4.A.0.108_Generic RU 1276-7743.ftf 973615KB
C6903_14.4.A.0.108_Generic_SG_1276-7937_R3C.ftf 1048335KB
Will any of these work considering I'm not staying on 4.4.4?
I assumed I could safely use the 'UK' file from the above list but then got paranoid I might brick my z1 by flashing a Ukranian ROM lol.
I've now got 'the fear' and am afraid I might **** this whole process up and brick my device.
which reminds me, one last thing... Ive downloaded the official SONY Flashtool (ver. 0.9.19.8).. is this the right tool for the job? I seem to remember reading that the official flashtool only works on unlocked bootloaders, but I've read so much im confused as hell at this point.
Sorry for the long post,
Any help would be greatly appreciated.
Click to expand...
Click to collapse
Hey there! Welcome to the Z1 community
All you have to do is make sure you flash the ftf specific to your device. As long as it says C6903 in the ftf, you're good to go. all these locations are just country specific customizations with some apps and stuff. I'd say you can just flash the SG ftf for a mostly bloat free system.
In addition, you can't use the SONY flashtool (EMMA) unless you have an unlocked bootloader. I'd recommend you use flashtool (just google it) which lets you flash on both lock and unlocked bootloaders. Once you flash KK, use one of the rooting programs (Turn on USB debugging, and connect it to your computer, run the application and go through the steps. Let me know if you need help on what method of root to use.)
Once rooted, you should have a recovery, which should let you flash a prerooted zip easily.
If you have an unlocked bootloader, just flash any custom kernel through fastboot, boot into its recovery By pressing vol up or down at boot logo) and flash the zip.
Final tip is, make sure you have the prerooted zip on your sd card before you flash a custom kernel, as not all can mount to the PC from the reovery and flashing an incompatible kernel (such as a 4.4.4 kernel on a 5.0 rom) won't let you boot into the ROM.
Feel free to ask if you have any doubts, come across any issues, or need any help at all.
SOURCE: I flashed a customized TW ftf on a Singapore bought C6902 which I'm using in India with no issues at all.
xasbo said:
Correct. There is no direct root for 5.1.1 currently. You could also downgrade to 5.0.2 instead, it doesn't really make a difference between that and 4.4.
It doesn't really matter what your interim ROM is as long as you do a clean flash when updating to 5.1.1 again.
Flashtool is the correct tool to be using. It has a utility called XperiFirm built it. You can use that to get any FTF that's publically available so that you don't have to depend on FTF threads.
The only way to have rooted 5.1.1 is with a pre-rooted zip, so you'll have to use PRFCreator to create that zip if there isn't one already posted for the specific variant you want to use.
Click to expand...
Click to collapse
Thanks for the quick reply mate. Sounds good, I might just go to 5.02 then as rooting that was fairly painless.
Ive already found a pre-rooted zip for stock 5.1.1 so I think I'm good to go on that one. Almost ready to dive in... thanks for clearing that up.
AnrgKrshn said:
Hey there! Welcome to the Z1 community
All you have to do is make sure you flash the ftf specific to your device. As long as it says C6903 in the ftf, you're good to go. all these locations are just country specific customizations with some apps and stuff. I'd say you can just flash the SG ftf for a mostly bloat free system.
In addition, you can't use the SONY flashtool (EMMA) unless you have an unlocked bootloader. I'd recommend you use flashtool (just google it) which lets you flash on both lock and unlocked bootloaders. Once you flash KK, use one of the rooting programs (Turn on USB debugging, and connect it to your computer, run the application and go through the steps. Let me know if you need help on what method of root to use.)
Once rooted, you should have a recovery, which should let you flash a prerooted zip easily.
If you have an unlocked bootloader, just flash any custom kernel through fastboot, boot into its recovery By pressing vol up or down at boot logo) and flash the zip.
Final tip is, make sure you have the prerooted zip on your sd card before you flash a custom kernel, as not all can mount to the PC from the reovery and flashing an incompatible kernel (such as a 4.4.4 kernel on a 5.0 rom) won't let you boot into the ROM.
Feel free to ask if you have any doubts, come across any issues, or need any help at all.
SOURCE: I flashed a customized TW ftf on a Singapore bought C6902 which I'm using in India with no issues at all.
Click to expand...
Click to collapse
Thanks for the in depth reply mate much appreciated. And thanks for the welcome, cheers
Ive got a locked bootloader so I'll check out that unnoficial flashtool, thanks.
Now here is where my confusion and lack of knowledge becomes another problem... You say that after rooting kitkat (using something like 'easy root tool'?) I "should have a recovery, which should let you flash a prerooted zip easily.".......
I was under the impression that after rooting kitkat I would have to install
'XZ Dual Recovery' to let me flash the pre-root zip.
Do I not have to install XZ dual recovery?
Thanks again for all your help... just trying to clear up the details before I start the whole process.
Cheers mate.
thesweeney80 said:
Thanks for the in depth reply mate much appreciated. And thanks for the welcome, cheers
Ive got a locked bootloader so I'll check out that unnoficial flashtool, thanks.
Now here is where my confusion and lack of knowledge becomes another problem... You say that after rooting kitkat (using something like 'easy root tool'?) I "should have a recovery, which should let you flash a prerooted zip easily.".......
I was under the impression that after rooting kitkat I would have to install
'XZ Dual Recovery' to let me flash the pre-root zip.
Do I not have to install XZ dual recovery?
Thanks again for all your help... just trying to clear up the details before I start the whole process.
Cheers mate.
Click to expand...
Click to collapse
Some root kits will install a custom recovery for you, but it's so easy to just install XZDR, that's what I always do. XZDR will actually give you multiple recoveries to choose from (but TWRP is generally considered the best), but it also has some nice addition features like RIC killer (which allows you to have full root vs partial root).
I should also clarify my previous statement - XperiFirm is great for getting *new* firmware.. but you will either need to back up copies of old firmware for future use, or seek them out in threads if you need them later.
xasbo said:
Some root kits will install a custom recovery for you, but it's so easy to just install XZDR, that's what I always do. XZDR will actually give you multiple recoveries to choose from (but TWRP is generally considered the best), but it also has some nice addition features like RIC killer (which allows you to have full root vs partial root).
I should also clarify my previous statement - XperiFirm is great for getting *new* firmware.. but you will either need to back up copies of old firmware for future use, or seek them out in threads if you need them later.
Click to expand...
Click to collapse
ahhh, now that makes sense (re: some root solutions including a recovery), thank you for clearing that up.
One final thing (before I dive in and at least get KK installed+rooted)...
If I have to start reading one more subject I think my head will explode lol so If you could just clear up one thing about RIC Killer....
I want full root, not partial - do I have to mess with RIC Killer or can I leave it alone?
On the guide I am trying to follow; someone said they ended up 'half rooted' - would that be because of RIC killer or user error when creating the pre-rooted zip?
just dont want to go through all this and end up only being half rooted haha, cheers.
edit: ok so after checking flashtool it seems I already have the right one (NOT SONY)... I have version 0.9.19.7 But there are two warnings (pasted below) on the flashtool thread.
Does the first warning simply mean 'Use the latest version'??
I have no clue about the second warning...do i just uncheck the uption regarding simlock.ta IF it is in the list of options when I flash kitkat? I have no clue if my ftf file includes simlock.ta.
Both warnings mention bricks and hard bricks so I'm taking them pretty seriously haha.
Any advice on these warnings would be great, thanks for your patience.
"WARNING : Since Xperia Z, sony added a new set of files I called bootbundle. Those files can be bundled from 0.9.13 and can be flashed from 0.9.13 only. To all those flashing devices from Z edition to all after Z, it is highly advised to use 0.9.13 and to be sure FTF you flash contain the bootbundle set. I've been reported of hard bricks because of missing such set of files from bundles.
I WANT TO GET YOUR ATTENTION ABOUT THE LATEST BRANCH 0.9.19. Without FSC, the tool will by default include simlock.ta if this file is present in the FTF. The result will be a bricked phone
As a workaround, until I release a patch, please please tick the exlude simlock.ta if you see it in the list.
0.9.19.6 fixes the simlock.ta issue. This file is by default excluded. Then it will not be flashed until you explicitely untick the exlcude simlock box. Do it at your own risk."
thesweeney80 said:
ahhh, now that makes sense (re: some root solutions including a recovery), thank you for clearing that up.
One final thing (before I dive in and at least get KK installed+rooted)...
If I have to start reading one more subject I think my head will explode lol so If you could just clear up one thing about RIC Killer....
I want full root, not partial - do I have to mess with RIC Killer or can I leave it alone?
On the guide I am trying to follow; someone said they ended up 'half rooted' - would that be because of RIC killer or user error when creating the pre-rooted zip?
just dont want to go through all this and end up only being half rooted haha, cheers.
Click to expand...
Click to collapse
Even if you don't have a RIC killer installed, most root stuff will work fine. On the Z1, the RIC will prevent you from doing specific things, most importantly mounting /system as writable, which is necessary for certain type of advanced modifications.
However, if you install XZDR, you'll get the custom recovery + the RIC killer. I would just do that.
edit: ok so after checking flashtool it seems I already have the right one (NOT SONY)... I have version 0.9.19.7 But there are two warnings (pasted below) on the flashtool thread.
Does the first warning simply mean 'Use the latest version'??
I have no clue about the second warning...do i just uncheck the uption regarding simlock.ta IF it is in the list of options when I flash kitkat? I have no clue if my ftf file includes simlock.ta.
Both warnings mention bricks and hard bricks so I'm taking them pretty seriously haha.
Any advice on these warnings would be great, thanks for your patience.
"WARNING : Since Xperia Z, sony added a new set of files I called bootbundle. Those files can be bundled from 0.9.13 and can be flashed from 0.9.13 only. To all those flashing devices from Z edition to all after Z, it is highly advised to use 0.9.13 and to be sure FTF you flash contain the bootbundle set. I've been reported of hard bricks because of missing such set of files from bundles.
I WANT TO GET YOUR ATTENTION ABOUT THE LATEST BRANCH 0.9.19. Without FSC, the tool will by default include simlock.ta if this file is present in the FTF. The result will be a bricked phone
As a workaround, until I release a patch, please please tick the exlude simlock.ta if you see it in the list.
0.9.19.6 fixes the simlock.ta issue. This file is by default excluded. Then it will not be flashed until you explicitely untick the exlcude simlock box. Do it at your own risk."
Click to expand...
Click to collapse
Correct, the warning is to just make sure you use a version later than 0.9.13; you're fine to use 0.9.19.7. It will tell you that .8 is out, but the change is not important to you. You don't need to do anything special regarding simlock.ta.
If you have an external SD card, copy everything you want to flash onto the phone before starting (5.1.1 prerooted, SuperSU, XZDR), so it's already there when you need it.
xasbo said:
Even if you don't have a RIC killer installed, most root stuff will work fine. On the Z1, the RIC will prevent you from doing specific things, most importantly mounting /system as writable, which is necessary for certain type of advanced modifications.
However, if you install XZDR, you'll get the custom recovery + the RIC killer. I would just do that.
Correct, the warning is to just make sure you use a version later than 0.9.13; you're fine to use 0.9.19.7. It will tell you that .8 is out, but the change is not important to you. You don't need to do anything special regarding simlock.ta.
If you have an external SD card, copy everything you want to flash onto the phone before starting (5.1.1 prerooted, SuperSU, XZDR), so it's already there when you need it.
Click to expand...
Click to collapse
THANKS.
So As long as I install XZDR I will have RIC killer and that will ensure a full root? thats great, cheers..
Thanks for clearing up the flashtool warnings too, very much appreciated.
As for your final tip about the SD card... do you mean copy everything to the SD card? or the phone? I'm ASSuming you mean the SD card as the phone memory will get wiped during flasshing if I clear everything? no?
Sorry mate I'm having a total brain-fart after everything Ive read, my comprehension skills are at an all time low lol. Tired.
Thanks again for all ya help mate, I'm just about ready to get this crap done... and then once Ive finished I know I'll be thinking 'wtf was all the panicking about? lol.
THANKS.
thesweeney80 said:
THANKS.
So As long as I install XZDR I will have RIC killer and that will ensure a full root? thats great, cheers..
Thanks for clearing up the flashtool warnings too, very much appreciated.
As for your final tip about the SD card... do you mean copy everything to the SD card? or the phone? I'm ASSuming you mean the SD card as the phone memory will get wiped during flasshing if I clear everything? no?
Sorry mate I'm having a total brain-fart after everything Ive read, my comprehension skills are at an all time low lol. Tired.
Thanks again for all ya help mate, I'm just about ready to get this crap done... and then once Ive finished I know I'll be thinking 'wtf was all the panicking about? lol.
THANKS.
Click to expand...
Click to collapse
Make sure you flash SuperSU and XZDR at the same time. If you do not, it will not work correctly (still only partial root). If you make your own pre-root ZIP, you can roll them into it and do it in one fell swoop.
Yeah. External SD card = not the phone. If you do a clean flash (which you should), you will be wiping the phone storage.
xasbo said:
Make sure you flash SuperSU and XZDR at the same time. If you do not, it will not work correctly (still only partial root). If you make your own pre-root ZIP, you can roll them into it and do it in one fell swoop.
Yeah. External SD card = not the phone. If you do a clean flash (which you should), you will be wiping the phone storage.
Click to expand...
Click to collapse
You're the man, man...THANKS. :highfive:
I'll check the pre-root zip I found and if it doesnt have Supersu included I'll make my own and include XZDR too - I like the idea of having things 'slipstreamed' into one flash - thanks for the tip.
Thanks a lot for all your help in calming all my little worries about this process,,, very much appreciated.
I'll do the whole lot tomorrow and report back... thanks again.
Suggestion - since you are re-learning and your goal at the moment is to have a rooted 5.1.1, I suggest you download and install Flashtool for windows. Go to http://www.flashtool.net/index.php. Now in Flashtool, your need to install the appropriate drivers for your device/s. Instructions searching (I'm doing my lunch while typing reply - lol). Then use XperiFirm which is integrated in Flashtool. It has its own icon, just click it so you can download a 5.0.2 FTF for yor region. Install that 5.0.2 FTF on your phone using Flashtool (Flash it Baby! Flash it!) Then you can root 5.0.2 with ease using Kingroot. Replace Kingroot with SuperSU. Then install NUT's Dual recovery. Then you can download any of the pre-rooted 5.1.1 FTFs XDA peeps are putting up under the General section and boom. You are now on 5.1.1. with root.
Deathschythe33 said:
Suggestion - since you are re-learning and your goal at the moment is to have a rooted 5.1.1, I suggest you download and install Flashtool for windows. Go to http://www.flashtool.net/index.php. Now in Flashtool, your need to install the appropriate drivers for your device/s. Instructions searching (I'm doing my lunch while typing reply - lol). Then use XperiFirm which is integrated in Flashtool. It has its own icon, just click it so you can download a 5.0.2 FTF for yor region. Install that 5.0.2 FTF on your phone using Flashtool (Flash it Baby! Flash it!) Then you can root 5.0.2 with ease using Kingroot. Replace Kingroot with SuperSU. Then install NUT's Dual recovery. Then you can download any of the pre-rooted 5.1.1 FTFs XDA peeps are putting up under the General section and boom. You are now on 5.1.1. with root.
Click to expand...
Click to collapse
cheers mate, I appreciate all the help I can get lol.
I decided to go with 5.0.2 instead of kitkat, but when I click on the .270 firmware links in xperifirm I get an error which says:
"Incomplete Firmware.
The following files are missing on the server:
fsp.zip.
Proceed with caution"
I clicked on the latest 5.1.1 firmwares and none of them give this error... so does the error simply mean that .270 is not the latest version? I couldnt find the answer in google. Are thes firmwares without fsp.zip safe to flash?
Thanks again.
edit: hmmm looks like i'll have to flash 4.4 instead.
When I try to download a .270 (5.0.2) firmware in xperifirm; it stops downloading after a few seconds and says a reuired file is missing
If I try to download one of the .368 firmwares it downloads ok
edit 2: F*ck my life... Not enough space on C: for unpacked ftf file (Small c partition on SSD) ... so unless there is a way for flashtool to flash from d:\...\firmware im screwed. I'll try compressing (NTFS) the c drive and hope thats enough
thesweeney80 said:
edit 2: F*ck my life... Not enough space on C: for unpacked ftf file (Small c partition on SSD) ... so unless there is a way for flashtool to flash from d:\...\firmware im screwed. I'll try compressing (NTFS) the c drive and hope thats enough
Click to expand...
Click to collapse
There is a solution, but it's slightly complicated. Proceed at your own risk, maybe do a little research to make sure you understand what I'm tell you to do.
1) Browse to C:\Users\<username>\. if you aren't already, show hidden files and folders.
2) Grab the .flashTool directory and move it onto a drive with sufficient free space (e.g., D:\.flashTool).
3) Go to Start and type cmd into the search field. When cmd.exe shows up, right-click and select Run As Administrator.
4) Change to the user directory ("cd C:\Users\<username>").
5) Make a junction point named .flashTool pointed to where ever you moved the folder (e.g., "mklink /j .flashTool D:\.flashTool").
This will make flashtool think that its settings/data folder is in the right place, when really it's just a fake folder linked somewhere else.
xasbo said:
There is a solution, but it's slightly complicated. Proceed at your own risk, maybe do a little research to make sure you understand what I'm tell you to do.
1) Browse to C:\Users\<username>\. if you aren't already, show hidden files and folders.
2) Grab the .flashTool directory and move it onto a drive with sufficient free space (e.g., D:\.flashTool).
3) Go to Start and type cmd into the search field. When cmd.exe shows up, right-click and select Run As Administrator.
4) Change to the user directory ("cd C:\Users\<username>").
5) Make a junction point named .flashTool pointed to where ever you moved the folder (e.g., "mklink /j .flashTool D:\.flashTool").
This will make flashtool think that its settings/data folder is in the right place, when really it's just a fake folder linked somewhere else.
Click to expand...
Click to collapse
Thanks again mate. Ive done that once before and forgotten all about it.
This time I just compressed c:\ with NTFS compression and it gained just enough space (F*ck you Winsxs).
But the above info will surely come in handy in future, so once again: Thanks! Tou've been a big help.
Just about to install XZDR and a pre-rooted 5.1.1 :fingers-crossed: Cheers mate :good:
thesweeney80 said:
Thanks again mate. Ive done that once before and forgotten all about it.
This time I just compressed c:\ with NTFS compression and it gained just enough space (F*ck you Winsxs).
But the above info will surely come in handy in future, so once again: Thanks! Tou've been a big help.
Just about to install XZDR and a pre-rooted 5.1.1 :fingers-crossed: Cheers mate :good:
Click to expand...
Click to collapse
What a way you went through.
As you already were on 5.0.2 and rooted you just had to install xzdr to your phone.
After that you could flash one of the Pre-Rooted zip files you need.
Sent from my C6903 using XDA Free mobile app
motorazrv3 said:
What a way you went through.
As you already were on 5.0.2 and rooted you just had to install xzdr to your phone.
After that you could flash one of the Pre-Rooted zip files you need.
Sent from my C6903 using XDA Free mobile app
Click to expand...
Click to collapse
well I know that now dont I? :silly: haha
yeah I was on a kingrooted 5.02, and should have just installed XZDR etc but I upgraded to 5.1.1 ASSunming I could root it with kingroot again, big mistake.
If I had read about kingroot not working on 5.1.1 I could have saved 24hrs worth of headaches.
Oh well... all done now. Rooted on 5.1.1, busybox installed and all
Now begins the long process of re-installing and customizing all over again *yipee*
No doubt I will go through all this again in a few weeks when I decide to unlock the BL and install a customROM And kernel
THIS is why I spent a few years with a 'dumb' phone after my HD2... ohhh the joys of flashing.
BIG Thanks to evryone who helped me out on this especially Xasbo, Gamer4Life and Deathschythe33. CHEERS
:good: glad you got it sorted.
Please Xasbo help, I Have loop all the time
xasbo said:
:good: glad you got it sorted.
Click to expand...
Click to collapse
Please, kan you help, I flashed downgrading my C6903 from .386 to C6903_14.4.A.0.108_Stripped, and got loops. Then I Tried again with several firmwares.108 and .386 and got the same result Loop :crying::crying:
I flashed with C6903_14.4.A.108 Generic SG and everything went fine, I got this massage:"NFC Firmware updating" "Don´t turn off you device", and got loop. Oh my god???? What Iam doing wrong?
Any suggestion. Thank you
asswembler said:
Please, kan you help, I flashed downgrading my C6903 from .386 to C6903_14.4.A.0.108_Stripped, and got loops. Then I Tried again with several firmwares.108 and .386 and got the same result Loop :crying::crying:
I flashed with C6903_14.4.A.108 Generic SG and everything went fine, I got this massage:"NFC Firmware updating" "Don´t turn off you device", and got loop. Oh my god???? What Iam doing wrong?
Any suggestion. Thank you
Click to expand...
Click to collapse
Hmm. I've never seen that NFC message before. Did it look like that firmware update completed before the phone restarted?
Are you still able to flash anything to the phone? What are you trying to accomplish?