capacitive button not working after install cyanogenmod on my samsung galaxy s5 mini g800m I tried do a wipe, reset but there is not solution also I Installed the stock rom and I have back to flash but not working de capacitive buttons
Note: when I turn on my cellphone the logo of samsung takes long time and after start to loading cyanogenmod
Related
hello people ..... I've been reading about it and have not found anything about it on my problem agdeseria much your supports.
I have a Galaxy S III Mini I8190 which after several attempts with various ROM's officials have not been able to enter the menu Buttons Volume Up + Home + POWER in other words I can not do wipe data and cache on my phone.
And the last option was to run a rom I found, was putting on two PDA the first was "PARAM_I8190.tar.md5" and the second "WIPE_I8190.tar.md5" that way my phone went out BLACK SCREEN with logo Galaxy S III Mini I8190 and lift or run the android.
As I can do to make this menu available again this and achieve installing new roms without the need to make the above described
this is a hot cloth does not work correctly when doing a factory reset from our device denuevo I8190 gets stuck at the black screen with the logo of Samsung
otes options to restore our devices as it should be
not working
both the Download and the probe installing them from the odin as PDA if they work because the device rebooted but not something to help me restore the combo of the three buttons to enter the menu cache and data wipe
recovery.tar.md5
or
PARAM_I8190.tar.md5
size: 16MB
flash in pda
[HOW-TO] Enable Three Button Combo [RECOVERY]
Hi, yesterday i got the OTA for Nougat on my t710.
I wanted to install TWRP, but all the guides i founded its not working on mine.
I have downloaded the twrp file from twrp.me
With odem flas it with the no reboot option
then power + home + down, and as soon as it goes black change the down to UP and and samsung logo appears and stays there for more than a minute..... the i just press power + down + home to reboot.... and goes back to the download screen from there i can reboot normaly....
Does any one have a procedure again s710 with 7.0
PD: I dont like samsung ROM id rather use Lineage OS
So i was updating my samsung tab s2 (t813) and it shutown during the update screen (the blue one) and after that it got stuck into a loop where it flashes samsung galaxy tab s2 logo.
Tried to boot into recovery doing Power + VolUp + Middle button. it shows the samsung galaxy tab s2 logo and "Booting into recovery......" blue text at the top.
It then proceeds into "installing system update"
Booting into recovery......
Installing system update
What i tried already:
- Flashing stock from downloaded from sammobiles "SM-T813_1_20190723165601_x7k14bhnoi"
Odin Flashing Stock Rom
- Flashing only the stock recovery to see if it would fix (Flashed but still stuck in "installing system update"
Odin Flashing Stock Recovery
If anyone knows something i can do that would be great! :good:
Thanks in advance
- Luís
Edit/Update:
So i was able to flash the stock firmware, battery still dead probably, charging but once i take off the charger it shuts down and starts boot loop, charging let me go to the system normaly, so its on the tab setup, i have to put the google account but i can't because the wifi button is off, if i press to enable it it goes off again. Anyone had this problem before? may it be because of a faulty battery that i can't turn the wifi on? (maybe it tells the system it is low and disables wifi?)
Luis
So my android samsung tab s2 has a baterry problem, without being in charger it doesn't start up just bootloop, if in charge it goes normaly
so i have to enter my google account as i reseted cache and format the tablet
but the wifi wont turn on during that process
butto is off, i press on it goes to off again
is there any chance this is being caused by the bad battery?
or is it a rom issue?
tab is samsung galaxy tab s2 (T813) rom is portugal rom (TPH) (also last version)
Hello, I am currently in a big problem right now,
My tablet, a Galaxy Tab S2 SM-T719Y is stuck inside a boot loop - the Samsung tab s2 logo appears, but it does not reach the Samsung logo.
I tried to go to recovery mode, but to no avail. So I booted the tab into download mode and tried to install TWRP into it but due to FRP lock, the device did not allow me to download it.
Trying to fix it for school, tried a few FRP unlocking tools, but does not work.
It'd be great if anyone can help me, thanks
This is the Tab S2 8.0", 32GB.
Hi , since no one else helped. Try again download mode. .
If it won't stop looping try vol down+pwr to turn it off
then vol up+home+pwr to turn device on, release buttons when screen turns on, wait after 10 secs recovery will start.
Then you can factory-reset, this will wipe all your stuff too, but hopefully fix it!
I downloaded odin and flashed the right TWRP kernel. After it was done with no signs of any problems, the phone started up and then got stuck to the boot screen. I couldn't get it to open to the TWRP menu by pressing the vol up + home + power buttons.
Kernel: https://www.mediafire.com/file/l5mig0jfwlb3ly1/GT-I8160-TWRP-Kernel.tar.md5/file
Oh ok i found the issue. That kernel only works on android gingerbread, not jellybean