Hi, yesterday i got the OTA for Nougat on my t710.
I wanted to install TWRP, but all the guides i founded its not working on mine.
I have downloaded the twrp file from twrp.me
With odem flas it with the no reboot option
then power + home + down, and as soon as it goes black change the down to UP and and samsung logo appears and stays there for more than a minute..... the i just press power + down + home to reboot.... and goes back to the download screen from there i can reboot normaly....
Does any one have a procedure again s710 with 7.0
PD: I dont like samsung ROM id rather use Lineage OS
Related
My Tab S2 T713 is currently running the latest stock Samsung rom. I want to install Lineage 15.1
I've downloaded twrp-3.2.1-0-gts28vewifi.img.tar & Odin 3.12.7. I can boot into download mode, flash TWRP with Odin which says success & my tablet reboots normally. When I power down & reboot into recovery TWRP gets over written by the stock recovery.
If I uncheck Auto Reboot in Odin, after flashing success, I'm still in download mode - I've read that I need to boot directly into recovery from download mode - how do I do this?
In download mode pressing home + voldown + power reboots normally. Pressing home + volup + power does nothing
What am I doing wrong?
Gidders said:
My Tab S2 T713 is currently running the latest stock Samsung rom. I want to install Lineage 15.1
I've downloaded twrp-3.2.1-0-gts28vewifi.img.tar & Odin 3.12.7. I can boot into download mode, flash TWRP with Odin which says success & my tablet reboots normally. When I power down & reboot into recovery TWRP gets over written by the stock recovery.
If I uncheck Auto Reboot in Odin, after flashing success, I'm still in download mode - I've read that I need to boot directly into recovery from download mode - how do I do this?
In download mode pressing home + voldown + power reboots normally. Pressing home + volup + power does nothing
What am I doing wrong?
Click to expand...
Click to collapse
https://forum.xda-developers.com/tab-s2/development/twrp-3-0-2-1-galaxy-tab-s22016-sm-t713-t3390627
Instructions:
Flash with ODIN 3.10.7 in the AP slot.
Put your device in DOWNLOAD mode.
Uncheck Auto reboot.
Load the respective file below into the AP slot and hit start.
After flashing and ODIN reports PASS immediately reboot to recovery by holding POWER + HOME + VOL DOWN.
As soon as the screen goes blank change to VOL UP whilst still holding POWER + HOME.
You should now see TWRP recovery.
Brilliant - thank you. Why they can't have they have that in the Lineage install instructions?
Now running Lineage 15.1 = happy bunny
boxcar8028 said:
https://forum.xda-developers.com/tab-s2/development/twrp-3-0-2-1-galaxy-tab-s22016-sm-t713-t3390627
Instructions:
Flash with ODIN 3.10.7 in the AP slot.
Put your device in DOWNLOAD mode.
Uncheck Auto reboot.
Load the respective file below into the AP slot and hit start.
After flashing and ODIN reports PASS immediately reboot to recovery by holding POWER + HOME + VOL DOWN.
As soon as the screen goes blank change to VOL UP whilst still holding POWER + HOME.
You should now see TWRP recovery.
Click to expand...
Click to collapse
For the love of god, thank you. This wasn't in the LineageOS instructions. But I still can't install it, it says my bootloader isn't supported (T713XXU1APG1).
notmyidea said:
For the love of god, thank you. This wasn't in the LineageOS instructions. But I still can't install it, it says my bootloader isn't supported (T713XXU1APG1).
Click to expand...
Click to collapse
Did you go into your developer settings and make sure you toggled the option titled "OEM Unlock"?
sh0nuff said:
Did you go into your developer settings and make sure you toggled the option titled "OEM Unlock"?
Click to expand...
Click to collapse
Got that figured out, thanks. All installed now after much difficulty.
notmyidea said:
Got that figured out, thanks. All installed now after much difficulty.
Click to expand...
Click to collapse
Good to hear! Please make sure you give a thumbs up to anyone who helped. It really keeps the community alive and kicking!
I found that I had to do this from completely powered off state:
press home + volume up + power
wait until second "sentence" appears on screen in yellow (the first "sentence" is blue),
Then release all buttons
twrp now boots.
for some reason, my internal and external storage is showing 0 mb. Anyway to fix this?
Try formatting (not just wipe) data.
Should the Galaxy Tab S2 2016 be on TWRP 3.2.1.0 or the new 3.2.3.0 for Linage OS 15?
If so, can't you just flash the update using TWRP on the img file, or is ODIN on the tar needed?
OK, I updated to TWRP 3.2.3 using TWRP Recovery and the img file. Appears to work fine.
SvenHee said:
I found that I had to do this from completely powered off state:
press home + volume up + power
wait until second "sentence" appears on screen in yellow (the first "sentence" is blue),
Then release all buttons
twrp now boots.
Click to expand...
Click to collapse
Sorry to revisit this issue. I can't get TWRP going on my S2 Tablet. I understand these instructions, but at the end of the ODIN installation there are two possibilities that I can see. If you set the ODIN to automatically reboot then you cannot do the above because it says to do it from completely powered off.
If you don't set ODIN to reboot automatically I can't get the tablet to turn off. I can only get it to boot by holding home+volume down + power. How do I get the tablet to power off before booting??
I am using ODIN 3.14.4 and TWRP-3.7.0 9-0-gts28wifi.img.tar and my stock firmware is NRD90M.T713XXS2BSG1 with Kernel 3.10.84-14953299
Thank you.
Hello,
I am trying to install a newer TWRP (https://forum.xda-developers.com/showthread.php?t=3557606) for Carbon Mod custom rom. I tried:
- install .img with TWRP in TWRP
- flashify
- official app TWRP from google play
- fastboot commands with "platform-tools"
Everywhere I get a message that everything went fine but in TWRP I still have the old version - 3.0.0.2 :/
I am asking for help because I have been fighting this from two days :/
I have unlocked bootloader, stock prerooted firmware .291 + EliteKernel v3.
Does it matter if I have dualrecovery?
I've got the same issue. I have also got dualrecovery. Did you have any luck? How do you access the dual recovery?
Dual Recovery
haverlok said:
I've got the same issue. I have also got dualrecovery. Did you have any luck? How do you access the dual recovery?
Click to expand...
Click to collapse
If in "dual recovery" you mean two versions of TWRP; I have two versions of TWRP on my Z3C.
My older version 3.1.1-0 is accessed by simply pressing the power button the same as turning on the phone. Release when the phone vibrates. When the green light appears in the top-left corner, I press and hold the down-volume until the light turns pink. It then boots to that TWRP recovery.
If I instead: while "pressing and holding down" the down-volume; then press and hold the power button. When the phone vibrates, I release the power button; then the Sony logo appears, release the volume-down. The phone then boots to the other recovery, which in my case is TWRP 3.2.3-0
.
Android 10 newest version.
So I installed magisk and everything went fine.
But when i switch off my device and turn it on I cant boot it up. It's stuck on the splash screen (turns on, splash screen, warning screen, splash screen) and keeps repeating. i cant boot into recovery either.
From what i read to boot into magisk on a s10+ you have to hold bixby+volume up+power, and to boot into recovery press those three, but when you see the second splash screen let go of the bixby button and keep holding the power+volume up.
I have flashed TWRP through the official twrp app, and maybe that's the problem? Maybe i don't know when to press those button combinations, but i have tried quite a few time and i just cant move past the second splash screen.
Please help.
Bluetinity said:
Android 10 newest version.
So I installed magisk and everything went fine.
But when i switch off my device and turn it on I cant boot it up. It's stuck on the splash screen (turns on, splash screen, warning screen, splash screen) and keeps repeating. i cant boot into recovery either.
From what i read to boot into magisk on a s10+ you have to hold bixby+volume up+power, and to boot into recovery press those three, but when you see the second splash screen let go of the bixby button and keep holding the power+volume up.
I have flashed TWRP through the official twrp app, and maybe that's the problem? Maybe i don't know when to press those button combinations, but i have tried quite a few time and i just cant move past the second splash screen.
Please help.
Click to expand...
Click to collapse
I can however boot into download (odin) mode by pressing the volume down+bixby and connecting to my pc.
try to reflash twrp . but using twrp from @ianmacd and flash using odin.
put ianmacd's twrp .IMG into .TAR using 7zip and flash Odin as AP @Bluetinity custom twrp is better than official ?
https://forum.xda-developers.com/ga...ecovery-twrp-3-3-0-galaxy-s10-exynos-t3924856
In my Oneplus 3 previously oxygen os 9 was installed but after seeing android 12, I wanted to install custom rom of android 11 but I didn't have an idea before of custom rom. I installed twrp and flashed many things after than whenever I booted it was stuck on a black screen and by pressing volume up + power button it boot's to fastboot. But to install the original os I flashed a wrong file and now no button is working and whenever I am plugging the phone in my pc it is just detected by the pc but nothing happens in the phone.
So, if anybody knows a solution can u plz help.
Hello,
I have flashed twrp over Odin and it works well, flashed custom room too, everything was super fine but after i restart the phone
Got stuck in twrp logo
Can't go to download mode or boot to system either.
Tried to hard restart power + vol - then after restart press power vol - bixby but same issue.
Download mode won't launch neither recovery.
Picture of the problem in the attachment
Please any solution?
first you flashed the wrong version of twrp according to your attachment, in my opinion you have to reflash everything and you can follow this tutorial and I hope it helps you
diznote4 said:
first you flashed the wrong version of twrp according to your attachment, in my opinion you have to reflash everything and you can follow this tutorial and I hope it helps you
Click to expand...
Click to collapse
Sorry but i don't think it'll boot first time or even i could flash custom rom from it if the recovery wasn't compatible.
After the twrp everything was fine, and i got access to twrp recovery and flash custom room without any problems.
First bot was fine, but after 2 consecutive restarts
This issue occurred .
And can't make it to download mode now, so I can't flash stock or anything.
I mean the correct version to flash android 13 it is twrp v 3 7 0 9 0 if not the phone hangs at twrp logo.
now to put back on download mode you have to do this manipulation
1/ connect your phone to your pc with the USB cable then press bixbi and power (between 5 and 7 seconds) and when the phone goes black at this moment don't let go of bixbi and power you have to press the volume button -
I hope it will go.